A

Abbott, P J*; Becerra, L O*; Borys, M*; Davidson, S; Jacques, C*; Lee, S*; Loayza, V*; Malengo, A*; Nieves Medina, M* (2015) Final report of CCM key comparison of mass standards CCM.M-K6, 50g. Metrologia, 52 (1A). 07004.

Abir, J*; Longo, S*; Morantz, P*; Shore, P (2016) Optimized estimator for real-time dynamic displacement measurement using accelerometers. Mechatronics, 39. pp. 1-11.

Abir, J*; Longo, S*; Morantz, P*; Shore, P (2017) Virtual metrology frame technique for improving dynamic performance of a small size machine tool. Precision Eng., 48. pp. 24-31.

Abir, J*; Morantz, P*; Longo, S*; Shore, P (2016) A novel accelerometer based feedback concept for improving machine dynamic performance. IFAC - Papers Online, 49 (21). pp. 553-558.

Acko, B*; McCarthy, M; Haertig, F*; Buchmeister, B* (2012) Standards for testing freeform measurement capability of optical and tactile co-ordinate measuring machines. Meas. Sci. Technol., 23 (9). 094013

Actis, A*; Bell, S A; Benyon, R*; Cretinon, B*; de Groot, M*; Heinonen, M*; Scholz, G*; Steiner, A* (1998) The use of a humid air generator as a reference method for measuring humidity. In: Proc. Third International Symposium on Humidity and Moisture., April 1998, London, UK.

Anhalt, K*; Hartmann, J*; Lowe, D; Machin, G; Sadli, M*; Yamada, Y* (2006) Thermodynamic temperature determination of Co-C. Pd-C, Pt-C and Ru-C eutectic fixed-point cells. Metrologia, 43 (2). S78-83

Anhalt, K*; Machin, G (2016) Thermodynamic temperature by primary radiometry. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150041

Armitage, D (1998) Mass & Weight. Technical Report. NPL, Teddington.

Austin, R S*; Giusca, C L; Macaulay, G; Moazzez, R*; Bartlett, D W* (2016) Confocal laser scanning microscopy and area-scale analysis used to quantify enamel surface textural changes from citric acid demineralisation and salivary remineralisation in vitro. Dental Materials, 32 (2). pp. 278-284.

B

Babourina-Brooks, B*; Simpson, R; Arvanitis, T N*; Machin, G; Peet, A C*; Davies, N P* (2015) MRS thermometry calibration at 3T: effects of protein, ionic concentration and magnetic field strength. MNR in Biomed., 28 (7). pp. 792-800.

Bacon, D R; Shaw, A (1993) Experimental validation of predicted temperature rises in tissue-mimicking materials. Phys. Med. Biol., 38. pp. 1647-1659.

Bailey, S L C; Lewis, A; Whiting, K; Lingard, M (2017) Care and use of gauge blocks. Measurement Good Practice Guide. 149

Bakucz, P*; Yacoot, A; Dziomba, T*; Krüger-Sehm, R* (2008) Neural network approximation of tip-abrasion effects in AFM-imaging. Meas. Sci. Technol., 19 (6). 065101

Barat, P*; Berry, J J; Borys, M*; Davidson, S; Fehling, T*; Fuchs, P*; Malengo, A*; Meury, P-A*; Silvestri, Z* (2013) Report detailing requirements of NMIs for storage and transfer equipment compatible with existing apparatus. (EMRP SIB-05 Work Package 4 Deliverable 4.1.1). NPL Report. ENG 43

Barnett, M E*; Turner, N P (1993) Phase information in the coherent imaging of abrupt edges. Opt. Commun., 96. pp. 27-35.

Barwood, G P; Gill, P; Rowley, W R C (1993) Laser diodes for length determination using swept-frequency interferometry. Meas. Sci. Technol., 4 (9). pp. 988-994.

Basile, G*; Becker, P*; Bergamin, A*; Cavagnero, G*; Franks, A; Jackson, K; Kuetgens, U*; Mana, G*; Palmer, E W; Robbie, C J; Stedman, M; Stumpel, J*; Yacoot, A; Zosi, G* (1993) COXI - Combined optical and x-ray interferometry for high precision dimensional metrology. In: 7th International Precision Engineering Seminar, May 1993, Kobe, Japan.

Basile, G*; Becker, P*; Bergamin, A*; Cavagnero, G*; Franks, A; Jackson, K; Kuetgens, U*; Mana, G*; Palmer, E W; Robbie, C J; Stedman, M; Stumpel, J*; Yacoot, A; Zosi, G* (2000) Combined optical and x-ray interferometry for high precision dimensional metrology. Proc. R. Soc. Lond. A, 456. pp. 701-729.

Battuello, M*; Chimenti, V*; Machin, G; McEvoy, H C; Perez, J*; Ricolfi, T*; Sergienko, R* (2001) A comparison of the primary standard zinc point blackbody cavities of NPL and CEM with IMGC. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Battuello, M*; Florio, M*; Machin, G (2011) Investigations at INRIM on a Pd-C cell manufactured by NPL. Metrologia, 48 (5). pp. 241-245.

Bayliss, D J (2002) Measurement of the volume of a Zerodur sphere of nominal mass 1 kg by comparison hydrostatic weighing with Zerodur and silica standards of similar nominal mass. NPL Report. CMAM 80

Bayliss, D J; Downes, S (1999) The modification and re-assessmant of the NPL 1kg solid density apparatus. NPL Report. CMAM 28

Bayliss, D J; Downes, S P (2003) An evaluation of a Paar 5000 density meter. NPL Report. MATC(A)139

Bayliss, D J; Leach, R K; Hall, M J (2006) Development of an electromagnetic spring for use with a high accuracy surface texture measuring probe. NPL Report. DEPC-EM 006

Bayliss, D J; Severn, I (2002) The traceability of density measurements via solid density reference standards using the NPL 1 kg hydrostatic weighing apparatus. NPL Report. CMAM 66

Becerra, L O*; Borys, M*; Jin Wan Chung*,, ; Davidson, S; Fuchs, P*; Jacques, C*; Wang Jian*,, ; Kubarych, Z J*; Kumar, A*; Malengo, A*; Fen, K*; Medina, N*; Meury, P-A*; Mizushima, S*; Picard, A*; Steyn, R*; Zelenka, Z* (2014) Final report on CCM.M-K4: key comparison of 1 kg stainless steel mass standards. Metrologia, 51 (1A). 07009.

Bell, S A (2007) Humidity measurement and applications - an introduction. Meas. Control, 40 (9). p. 267.

Bell, S A (1999) Study of conceptual design for flow-mixing stage of low-range humidity standard generator. NPL Report. CMAM 39

Bell, S A (1998) Validation of the NPL primary gravimetric hygrometer. In: Proc. Third international symposium on humidity and moisture., April 1998, London, UK.

Bell, S A (2013) The beginner's guide to humidity measurement. Measurement Good Practice Guide. 124

Bell, S A (1996) A guide to the Measurement of Humidity. Technical Report. NPL, Teddington.

Bell, S A (1998) A study of the requirements for standards for the measurement of moisture in solid materials. NPL Report. CMAM 20

Bell, S A (1995) A survey to assess the industrial requirement for a code of practice for humidity measurement. NPL Report. MOM 124

Bell, S A; Benyon, R*; Böse, N*; Heinonen, M* (2008) A roadmap for humidity and moisture measurement. Int. J. Thermophysics, 29 (5). pp. 1537-1543.

Bell, S A; Boese, N*; Bosma, R*; Buzoianu, M*; Carroll, P; Fernicola, V*; Georgin, E*; Heinonen, M*; Kentved, A*; Melvad, C*; Nielsen, J* (2015) Status and strategy for moisture metrology in European metrology institutes. Int. J. Thermophysics, 36 (8). pp. 2185-2198.

Bell, S A; Boyes, S J (2001) An assessment of experimental data that underpin formulae for water vapour enhancement factor. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Bell, S A; Carroll, P; Stevens, M (2009) Study of the need for improved traceability for air temperature measurements - summary report. NPL Report. ENG 11

Bell, S A; Carroll, P; Stevens, M (2009) Study of the need for traceability for humidity measurements above 100 °C - summary report. NPL Report. ENG 12

Bell, S A; Carroll, P A; Beardmore, S L; England, C*; Mander, N* (2017) A methodology for study of in-service drift of meteorological humidity sensors. Metrologia, 54 (3). S63-S73

Bell, S A; Gardiner, T; Stevens, M; Waterfield, K* (2002) Evaluation of trace moisture sensors - interim report. NPL Report. CBTLM 19

Bell, S A; Hinds, G; de Podesta, M; Stevens, M; Wilkinson, J (2012) Humidity, pressure and temperature measurements in an interdigitated-flow PEM hydrogen fuel cell. Int. J. Thermophysics, 33 (8-9). pp. 1583-1594.

Bell, S A; Scott, M* (1995) A code of practice for humidity measurement. Meas. Control, 28 (May). 106 - 108

Bell, S A; Stevens, M; Barwood, G P; Edwards, C S; Gill, P (2001) Evaluation of a tuneable diode laser absorption spectrometer against the NPL low frost-point generator. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Bell, S A; Stevens, M*; Abe, H*; Benyon, R*; Bosma, R*; Fernicola, V*; Heinonen, M*; Huang, P*; Kitano, H*; Li, Z*; Nielsen, J*; Ochi, N*; Podmurnaya, O A*; Scace, G*; Smorgon, D*; Vicente, T*; Vinge, A F*; Wang, L*; Yi, H* (2015) Final report on CCT-K6: comparison of local realisations of dew-point temperature scales in the range -50 ºC to +20 ºC. Metrologia, 52 (1A). 03005.

Berry, J; Davidson, S; Brown, S (2007) The development of artefacts for the gravimetric measurement of the density of moist air. NPL Report. ENG 1

Berry, J; Davidson, S; Burrows, A*; Chapman, A*; Coben-Gipps, L*; Goddard, P*; Jenkins, C*; Pain, J*; Parkinson, M*; Taylor, A* (2008) UK comparison of 1 kg magnetic stainless steel weights. NPL Report. ENG 6

Berry, J; Downes, S P (2006) An investigation into the effect of marking mass standards of OIML class E1. NPL Report. DEPC-EM 002

Berry, J J (2014) A method to enable on-demand preparation of controlled contaminated samples for evaluation of cleaning techniques (EMRP SIB-05 Work Package 4. Deliverable 4.2.2). NPL Report. ENG 48

Berry, J J; Bentouati, D*; Borys, M*; Högström, H*; Kaçmaz, S*; Malengo, A*; Marti, K*; Mecke, M*; Silvestri, Z*; Snopko, L*; Zuda, J* (2015) A comparison between seven National Measurement Institutes to evaluate inert gas transfer of mass standards against current best practice. NPL Report. ENG 61

Berry, J J; Borys, M*; Davidson, S; Firlus, M*; Fuchs, P*; Kacmaz, S*; Malengo, A*; Medina, N*; Meury, P-A*; Picard, A* (2013) Report on the CCM WG TG1 pilot comparison to measure water vapour sorption on stainless steel mass standards. NPL Report. ENG 46

Berry, J J; Borys, M*; Firlus, M*; Green, R*; Malengo, A*; Mecke, M*; Meury, P-A*; Zuda, J* (2014) EMRP SIB-05 work package 2. deliverable 2.2.2. analysis of the correlation of sorption coefficients to pressure. NPL Report. ENG 50

Berry, J J; Borys, M*; Mecke, M*; Silvestri, Z* (2015) Report on the evaluation of medium-term (6-month) storage in nitrogen compared with storage in air (EMRP SIB-05 Work Package 4 Deliverable 4.3.3). NPL Report. ENG 60

Berry, J J; Davidson, S (2008) Contamination deposited on mass standards in vacuum from a Penning ionisation gauge. Meas. Sci. Technol., 19 (11). 115102

Berry, J J; Davidson, S (2014) Effect of pressure on the sorption correction to stainless steel, platinum/iridium and silicon mass artefacts. Metrologia, 51 (2). S107-S113

Berry, J J; Davidson, S (2011) Evaluation of equipment and procedures for the transfer and storage of mass standards in inert gas. Metrologia, 48 (5). pp. 391-398.

Berry, J J; Davidson, S; Barat, P*; Davis, R* (2011) Comparison of UV/ozone cleaning of platinum/iridium kilogram mass standards with nettoyage-lavage cleaning. Metrologia, 48 (3). pp. 181-186.

Berry, J J; Davidson, S; Downes, S; Hogstrom, R*; Silvestri, Z* (2016) An evaluation of potential materials for the handling and support of mass standards in vacuum/inert gas apparatus. NPL Report. ENG 63

Berry, J J; Downes, S; Davidson, S (2010) UV/ozone cleaning of platinum/iridium kilogram mass prototypes. Metrologia, 47 (4). pp. 410-418.

Birch, K P; Reinboth, F*; Ward, R E; Wilkening, G* (1993) The effect of variations in the refractive index of industrial air upon the uncertainty of precision length measurement. Metrologia, 30 (1). pp. 7-14.

Bloembergen, P*; Battuello, M*; Girard, F*; Machin, G; Wright, L (2016) On the correction of the melting curve of the eutectic Co-C for the effect of the thermal inertia of the furnace. Int. J. Thermophysics, 37 (4). p. 44.

Bloembergen, P*; Battuello, M*; Girard, F*; Machin, G; Wright, L (2015) On the influence of the furnace and cell conditions on the phase transition of the eutectic Co-C. Int. J. Thermophysics, 36 (8). pp. 1859-1887.

Bloembergen, P*; van der Ham, E W M*; Machin, G; Schrama, C* (2001) A study on the instrument-oriented characterisation of low temperature radiation thermometers. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Blues, J*; Bayliss, D J; Buckley, M* (2004) The calibration and use of piston pipettes. Measurement Good Practice Guide. 69

Blunt, L*; Jiang, X*; Leach, R K; Harris, P M; Scott, P* (2005) The development of user-friendly software measurement standards for surface topography software assessment. In: Proceedings 10th International Conference on Metrology and Properties of Engineering Surfaces, 4-7 July 2005, St Ettiane, France.

Blunt, L*; Jiang, X*; Xiao, S*; Li, T*; Feng, X*; Brennan, J*; Scott, P*; Leach, R K; Harris, P M; Parkin, G I (2005) Development and dissemination of SOFTGAUGES for surface topography. Technical Report. Centre for Precision Technologies, University of Huddersfield.

Blunt, L*; Leach, R K; Jiang, X*; Scott, P*; Harris, P M; Xiao, S*; Li, T*; Parkin, G I (2005) Development of softgauges for surface metrology. In: 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 8-11 May 2005, Montpellier, France.

Blunt, L*; Xiang Jiang*,, ; Leach, R K; Harris, P M; Scott, P* (2008) The development of user-friendly software measurement standards for surface topography software assessment. Wear, 264 (5-6). pp. 389-393.

Bojkovski, J*; Fischer, J*; Machin, G; Pavese, F*; Peruzzi, A*; Renaot, E*; Tegeler, E* (2009) A roadmap for thermal metrology. Int. J. Thermophysics, 30 (1). pp. 1-8.

Boumaza, T; Redgrove, J (2003) Use of the transient plane source technique for rapid multiple thermal property measurements. Int. J. Thermophysics, 24 (2). pp. 501-12.

Boyes, S J; Bell, S A (1999) Assessment of fundamental data used in humidity metrology. NPL Report. CMAM 42

Bramley, P*; Cruickshank, D*; Pearce, J (2017) The development of a practical, drift free, Johnson-noise thermometer for industrial applications. Int. J. Thermophysics, 38 (2). p. 25.

Brennan, J K*; Crampton, A*; Jiang, X*; Leach, R K; Harris, P M (2005) Approximation of surface texture profiles. J. Phys., Conf. Ser., 13. pp. 264-267.

Brennan, J K*; Crampton, A*; Jiang, X*; Leach, R K; Harris, P M (2005) Reconstruction of continuous surface profiles from discretely sampled data. In: 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 8-11 May 2005, Montpellier, France.

Brennan, J K*; Mason, J C*; Jiang, X*; Leach, R K; Harris, P M (2004) Approximation of surface texture profiles and parameters. In: 4th euspen International Conference, 31 May 2004 - 2 June 2004, Glasgow, UK.

Brice, L (2006) Determination of sensitivity coefficients for Rockwell hardness scales HR15N, HR30N and HRA. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Brice, L; Davis, F; Crawshaw, A H (2003) Uncertainty in hardness measurement. NPL Report. CMAM 87

Brice, L K W; Morris, S*; Motely, J*; Leach, R K (2008) Measurement of single and multi layer thin film coatings for medical implants. In: euspen 2008, 18-22 May 2008, Zurich.

Brice, L K W; Morris, S*; Motely, J*; Leach, R K (2008) Measurement of single and multi layer thin film coatings for medical implants. NPL Report. ENG 10

Broussely, M; Levick, A P; Edwards, G J (2005) Simultaneous measurement of temperature, thermal diffusivity, thermal conductivity and spectral emissivity by photothermal radiometry. J. Phys. IV, Proc., 125. pp. 627-630.

Broussely, M; Levick, A P; Edwards, G J (2005) Survey of applications for LART (Th 3.1.1.01). NPL Report. DEPC-TH 008

Broussely, M*; Levick, A P; Edwards, G J (2005) A novel comparative photothermal method for measuring thermal diffusivity. Int. J. Thermophysics, 26 (1). pp. 221-232.

Brown, E; Hao, L; Cox, D C; Gallop, J C (2008) Scanning thermal microscopy probe capable of simultaneous electrical imaging and the addition of a diamond tip. J. Phys., Conf. Ser., 100 (5). 052012

Buchner, C*; Zelenka, Z*; Wolf, H*; Vamossy, C*; Lorefice, S*; Lenard, E*; Spohr, I*; Mares, G*; Perkin, M; Parlic-Risovic, T*; Grue, L L*; Tammik, K*; van Andel, L* (2016) Comparison of density determination of liquid samples by density meters. Metrologia, 53 (1A). 07006.

Burke, T*; Leach, R K; Boyd, R; Gee, M G; Roy, D; Yacoot, A; Ulrich-Danzebrink, H*; Dziomba, T*; Koenders, L*; Depero, L E*; Carneiro, K*; Dirschel, K*; Morazzani, V*; Lausmaa, J*; Pendrill, L*; Pidduck, A*; Roebben, G*; Sánchez, A*; Unger, W E S*; Proykova, A* (2011) European Nanometrology 2020. Technical Report. Co-Nanomet.

Burt, D P*; Dobson, P S*; Docherty, K E*; Jones, C W; Leach, R K; Thoms, S*; Weaver, J M R*; Zhang, Y* (2012) Aperiodic interferometer for six degrees of freedom position measurement. Opt. Lett., 37 (7). pp. 1247-1249.

Butler, B P; Music, V; Redgrave, F J (1999) Influence of orifice geometry on the simplification of transmission probability calculations. Vacuum, 53 (1-2). pp. 163-166.

C

Callendar, M J*; Efstathiou, A*; King, C W*; Walker, D D*; Gee, A E*; Lewis, A J; Oldfield, S; Steel, R M (2006) A 1m swing arm profilometer for large telescope mirror element. In: Proc. ASPE 2006 Annual Meeting, October 2006, Moterey, CA, USA.

Callender, M J*; Efstathiou, A*; King, C W*; Walker, D D*; Gee, A E*; Lewis, A J; Oldfield, S; Steel, R M (2006) A swing arm profilometer for large telescope mirror element metrology. Proc. SPIE - Int. Soc. Opt. Eng., 6273. 62732R

Carroll, P A; Bell, S A (2012) Consultation on the use of certified reference materials for the calibration of moisture measurement instrumentation. NPL Report. ENG 40

Carroll, P A; Bell, S A (2008) Needs for NMS support for measurements of moisture in materials. NPL Report. ENG 7

Carroll, P A; Bell, S A; Maxwell, A S; Tomlins, P E (2012) Non-destructive moisture content measurement of bioabsorbable polymers used in medical implants. Int. J. Thermophysics, 33 (8-9). pp. 1650-1660.

Carroll, P A; Bell, S A; Stevens, M (2010) Calibration issues for measurement of moisture in materials. NPL Report. ENG 21

Carroll, P A; Bell, S A; Stevens, M (2015) A calibration facility for dew point in air up to 1 Mpa. Int. J. Thermophysics, 36 (12). pp. 3453-3465.

Carroll, P A; Mari, D*; Greenwood, J C; Raiteri, G*; Rumiano, G* (2007) Calibration of two spinning rotor gauges as a bilateral comparison between NPL and INRIM in the range 3 · 10-4 Pa to 9 · 10-2 Pa. NPL Report. DEPC-EM 015

Castro, P*; Machin, G; Bloembergen, P*; Lowe, D; Whittam, A* (2014) Thermodynamic temperatures of high-temperature fixed points: uncertainties due to temperature drop and emissivity. Int. J. Thermophysics, 35 (6-7). pp. 1341-1352.

Castro, P*; Machin, G; Pearce, J V (2013) Thermal modelling comparing high temperature fixed point measurements by contact and non-contact thermometry. AIP Conf. Proc., 1552. pp. 358-362.

Castro, P*; Machin, G; Villamanan, M A*; Lowe, D (2011) Calculation of the temperature drop for high temperature fixed points for different furnace conditions. Int. J. Thermophysics, 32 (7-8). pp. 1773-1785.

Celik, M*; Hamid, R*; Kuetgens, U*; Yacoot, A (2012) Picometre displacements measurements using a differential Fabry-Perot optical Interferometer and an x-ray interferometer. Meas. Sci. Technol., 23 (8). 085901

Chattle, M V; Butler, J (1994) BIPM project: intercomparison of water triple point cells. NPL Report. QU 104

Chattle, M V; Butler, J (1994) EUROMET Project No.278: intercomparison of water triple-point cells. NPL Report. QU 101

Chesna, J W*; Shimizu, Y*; Leach, R K (2013) On the use of mercury sessile drops as reference artefacts for the calibration of optical surface topography measuring instruments. In: 28th Annual Meeting of the American Society for Precision Engineering., 20-25 October 2013, St. Paul, Minnesota, USA.

Chetwynd, D G*; Leach, R K (2002) Dynamic performance of a cantilever-based topography. In: 3rd Internation Conference of the European Society for Precision Engineering and Nanotechnology (euspen), 26-30 May 2002, Eindhoven, The Netherlands.

Chetwynd, D*; Howell, G*; Leach, R K (2002) Evaluation of the dynamic performance of a glass cantilever style constant force probe for the measurement of surface texture. NPL Report. CBTLM 23

Childs, C*; Machin, G (2009) Reliability issues in human brain temperature measurement. Critical Care, 13 (4). R106.

Childs, C*; Wieloch, T*; Lecky, F*; Machin, G; Harris, G*; Stocchetti, N (2010) Report of a consensus meeting on human brain temperature after severe traumatic brain injury: its measurement and management during pyrexia. Frontiers in Neurotrauma, 1. Article 146

Choi, I-M*; Robinson, I A; Woo, S-Y* (2008) An analysis of the mechanical characteristics of the knife edges used in the NPL watt balance. J. Korean Soc. Prec. Eng., 25 (4). pp. 61-68.

Chu, B; Machin, G (1996) Recent developments in low temperature non-contact thermometry at the NPL. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Chu, B; Machin, G (1996) An evaluation of infrared thermometers by the intercomparison of standard blackbody sources. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Chu, B; Machin, G (1999) A low-temperature blackbody reference source to -40oC. Meas. Sci. Technol., 10 (1). pp. 1-6.

Chu, B; McEvoy, H C; Andrews, J W (1994) The NPL reference sources of blackbody radiation. Meas. Sci. Technol., 5 (1). pp. 12-19.

Chug, B; McEvoy, H C; Machin, G (2003) Use of an InGaAs radiation thermometer to verify the accuracy of the NPL blackbody reference sources from 156 ºC to 600 ºC. AIP Conf. Proc., 684 (2). pp. 571-576.

Clark, J; Tye, R (2003) Thermophysical properties reference data for some key engineering alloys. High Temp.-High Press., 35-36 (1). pp. 1-14.

Claverley, J D; Burisch, A*; Leach, R K; Raatz, A* (2012) Semi-automated assembly of a MEMS-based micro-scale CMM probe and future optimization of the process chain with a view to desktop factory automation. In: Precision Assembly Technologies and Systems 6th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2012,, 12-14 February 2012, Chamonix, France.

Claverley, J D; Coupland, J M*; Leach, R K (2010) Measurement of the form and layer thickness of the target spheres for inertial confinement fusion. NPL Report. ENG 26

Claverley, J D; Georgi, A*; Leach, R K (2010) Modelling the interaction forces between an ideal measurement surface and the stylus tip of a novel vibrating micro-scale CMM probe. In: 5th International Precision Assembly Seminar (IPAS 2010), February 2010, Chamonix, France.

Claverley, J D; Leach, R K (2013) Development of a three-dimensional vibrating tactile probe for miniature CMMs. Precision Eng., 37 (2). pp. 491-499.

Claverley, J D; Leach, R K (2010) Investigation into the fixturing techniques used by the project partners in the EUMINAfab consortium. NPL Report. ENG 28

Claverley, J D; Leach, R K (2010) Micro-scale co-ordinate metrology at the National Physical Laboratory. In: 36th International MATADOR Conference, 14 - 16 July 2010, Manchester, UK.

Claverley, J D; Leach, R K (2013) Three-dimensional characterisation of a novel vibrating tactile probe for miniature CMMs. In: Laser Metrology and Machine Performance X (LAMDAMAP 2013), 20-21 March 2013, Chicheley, UK.

Claverley, J D; Leach, R K (2010) A novel three-axis vibrating micro-CMM probe with isotropic probing forces. In: Proceedings of the 10th International Conference of the European Society for Precision Engineering & Nanotechnology (euspen), 31 May - 4 June 2010, Delft, Netherlands.

Claverley, J D; Leach, R K (2015) A review of the existing performance verification infrastructure for micro-CMMs. Precision Eng., 39. pp. 1-15.

Claverley, J D; Leach, R K (2010) A vibrating micro-scale CMM probe for measuring high aspect ratio structures. Microsyst. Technol., 16 (8-9). pp. 1507-1512.

Claverley, J D; Sheu, D-Y*; Burisch, A*; Leach, R K; Raatz, A* (2011) Assembly of a novel MEMS-based 3D vibrating micro-scale co-ordinate measuring machine probe using desktop factory automation. In: IEEE International Symposium on Assembly and Manufacturing (ISAM) 2011, 25-27 May 2011.

Clow, P (1994) Elastic distortion calculations at NPL on LNE 200 MPa pressure balances as part of EUROMET Project 256. NPL Report. MOM 120

Clow, P (1994) Elastic distortion calculations at NPL on a PTB 400 MPa pressure balance as part of EUROMET Project 256. NPL Report. MOM 117

Corcoran, H C; Brown, S B; Robson, S*; Speller, R D*; McCarthy, M B (2016) Observations on the performance of X-ray computed tomography for dimensional metrology. International Archives of the Photogrammetry Remote Sensing and Spatial Information Sciences, 41 (B5). pp. 25-31.

Corta, R*; Cox, M G; Cross, N R; Dotson, J R; Flack, D R; Forbes, A B; O'Donnell, J*; Peggs, G N; Prieto, E* (1998) A large reference artefact for CMM verification. NPL Report. CLM 6

Coupland, J M*; Mandal, R*; Palodhi, K*; Leach, R K (2013) Coherence scanning interferometry: linear theory of surface measurement. Appl. Opt., 52 (16). pp. 3662-3670.

Coveney, T (2014) Dimensional measurement using vision systems. Measurement Good Practice Guide. 39

Cox, M G; Cross, N R; Flack, D R; Forbes, A B; Peggs, G N (1997) Measurement of artefacts using repositioning methods. NPL Report. CLM 2

Cox, M G; Forbes, A B; Peggs, G N (1997) CMM verification and grading. NPL Report. CLM 1

Crawshaw, A H; Robinson, A D (2002) The calibration of force transducers 'on-the-fly'. NPL Report. CMAM 86

Cui, Z*; Leach, R K; Lewis, A; Singleton, L* (2003) Standardisation for microsystems technology: the way forward. In: Proceedings of the 8th International Conference on the Commercialization of Micro and Nano Systems: COMS 2003, 8-11 September 2003, Amsterdam.

D

Dale, J*; Hughes, E B; Lancaster, A J*; Lewis, A J; Reichold, A J H*; Warden, M S (2014) Multi-channel absolute distance measurement system with sub ppm-accuracy and 20 m range using frequency scanning interferometry and gas absorption cells. Opt. Express, 22 (20). pp. 24869-24893.

Davidson, S (2012) Characterisation of the long-term stability of mass standards stored in vacuum by weighing and surface analysis. Metrologia, 49 (3). pp. 200-208.

Davidson, S (2010) Determination of the effect of transfer between vacuum and air on mass standards of platinum-iridium and stainless steel. Metrologia, 47 (4). pp. 487-497.

Davidson, S (2015) EMRP SIB05 deliverable 1.1.3 Evaluation of heat treated silicon samples for surface properties and charge retention. NPL Report. ENG 62

Davidson, S (2013) EUROMET Project 509: A comparison of platinum-iridium kilogram mass standards. NPL Report. ENG 47

Davidson, S (1999) An assessment of commercial mass comparators for the effects of magnetic and magnetically susceptible weights. NPL Report. CMAM 32

Davidson, S; Berry, J J; Marti, K* (2015) Practical requirements for the successful implementation and subsequent dissemination of the redefined kilogram. Vacuum, 120. pp. 139-146.

Davidson, S; Brown, S B; Berry, J (2004) A report on the potential reduction in uncertainty from traceable comparisons of platinum-iridium and stainless steel kilogram mass standards in vacuum. NPL Report. CMAM 88

Davidson, S; Peattie, G; Buckley, M*; Palmer, D* (2001) Investigate thermal influence on weights and on mass comparators. NPL Report. CMAM 74

Davidson, S; Perkin, M (2013) An investigation of density determination methods for porous materials, small samples and particulates. Measurement, 46 (5). pp. 1766-1770.

Davidson, S; Perkin, M; Buckley, M* (2004) The measurement of mass and weight. Measurement Good Practice Guide. 71

Davidson, S; Robinson, I A (2014) Preparations for the forthcoming redefinition of the kilogram. Meas. Control, 47 (10). pp. 308-314.

Davidson, S; Van Andel, I*; Spohr, I*; Joosten, H*; Smits, E*; Fitzgerald, H* (2012) Report on EURAMET Project 1214. Density measurement of viscous oils (using vibrating tube density meters). NPL Report. ENG 39

Davies, H; Gray, J; Quested, P N; Head, D I; Pearce, J; de Podesta, M (2007) The freezing behaviour of high purity elements for realising the international temperature scale. In: SP07 Proceedings of the 5th International Conference on Solidification Processing, 23-25 July 2007, Sheffield, UK.

Davies, R*; London, J*; Leach, R K; Turner, N (2000) 'Measurement matters' consistent and accurate measurement for the clothing industry. In: IFFTI 3rd Annual Conference Fashion Directions: Visioning the Future, 8-9 November 2000, London College of Fashion.

Davis, F (2001) Results of a survey of the priorities for an increased range of UK traceable hardness scales. NPL Report. CMAM 69

Davison, S; Berry, J; Abbott, P*; Marti, K*; Green, R*; Malengo, A*; Nielsen, L* (2016) Air-vacuum transfer; establishing traceability to the new kilogram. Metrologia, 53 (5). A95-A113

Decker, J E*; Lewis, A J; Cox, M G; Steele, A G*; Douglas, R J* (2006) Evaluating results of international comparisons: worked example of CCL-K2 comparison of long gauge block calibration. In: IMEKO World Congress 2006, September 2006, Rio de Janeiro.

Decker, J E*; Lewis, A J; Cox, M G; Steele, A G*; Douglas, R J* (2010) A recommended method for evaluation of international comparison results. Measurement, 43 (6). pp. 852-856.

Dong, W; Lowe, D; Machin, G; Bloembergen, P*; Wang, T*; Lu, X* (2017) Investigation of the furnace effect in cobalt-carbon high temperature fixed point cells. Measurement, 106. pp. 88-94.

Dong, W*; Lowe, D H; Lu, X*; Machin, G; Yuan, Z*; Wang, T*; Bloembergen, P*; Xiao, C* (2013) Bilateral ITS-90 comparison at WC-C peritectic fixed point between NIM and NPL. AIP Conf. Proc., 1552. pp. 786-790.

Dong, W*; Machin, G; Bloembergen, P*; Lowe, D; Wang, T* (2016) Investigation of ternary and quaternary high-temperature fixed-point cells, based on platinum-carbon-X, as blind comparison artefacts. Meas. Sci. Technol., 27 (11). 115010

Downes, S (1998) Present status of the different approaches to the re-definition of the kilogram. NPL Report. CMAM 11

Downes, S; Elandaloussi, S* (1997) A comparison of hydrostatic weighing methods used to determine the density of solid artefacts at the National Physical Laboratory (NPL), UK and Institut National de Metrologie (BNM-INM), FR. NPL Report. MOT 3

Downes, S; Knott, A J; Robinson, I A (2014) Towards a shock tube method for the dynamic calibration of pressure sensors. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 372 (2023). 20130299

Downes, S P (2001) Interim report on the fabrication and characterisation of the surface of silicon artefacts used in the Avogadro project. NPL Report. CMAM 64

Downes, S P; Knott, A J; Robinson, I A; Smith, J*; Beale, R* (2013) Pressure waveform generator for replicating arterial pressure waveforms. NPL Report. ENG 44

Downs, M J (1998) Realisation of the optimum performance from length-measuring interferometers by atmospheric refractometry. Proc. SPIE - Int. Soc. Opt. Eng., 3477. pp. 46-53.

Downs, M J; Forbes, A B; Siddle, J E (1998) The verification of a high precision two dimensional position measurement system. In: Applied Optics and Optoelectronics 1998, 16-19 March 1998, Brighton, UK.

da Silva, R; Pearce, J V; Machin, G (2017) A systematic evaluation of contemporary impurity correction methods in ITS-90 aluminium fixed point cells. Metrologia, 54 (3). pp. 365-380.

da Silva, R*; Veltcheva, R I; Gray, J; Pearce, J V; Machin, G; Teixeira, R N* (2013) Bilateral comparison of tim fixed point cells between INMETRO and NPL. AIP Conf. Proc., 1552. pp. 777-781.

de Podesta, M (2013) Absolutely freezing. New Scientist, 218 (2922). pp. 42-45.

de Podesta, M (2012) Climate change. Chemistry and Industry, 76 (12). pp. 24-27.

de Podesta, M (2012) In response to climate sceptics. Chemistry & Industry (5). On-line

de Podesta, M (2014) Practical acoustic thermometry. Nucl. Eng. Int., 59 (715). pp. 26-29.

de Podesta, M (2013) Redefining temperature. Phys. World, 26 (8). pp. 28-32.

de Podesta, M (2016) Rethinking the kelvin. Nature Physics, 12 (1). p. 104.

de Podesta, M (2009) What goes up ... Phys. World, 22 (2). pp. 20-21.

de Podesta, M (2014) The redefinition of the kelvin. Meas. Control, 47 (10). pp. 323-328.

de Podesta, M; Edwards, G J (2008) The limits of a rayleigh scattering primary thermometer. Int. J. Thermophysics, 29 (5). pp. 1719-1729.

de Podesta, M; Harris, P M; Underwood, R; Sutton, G; Mark, D F*; Stuart, F*; Morantz, P*; Machin, G (2016) Response to Macnaughton's"Comment on `A low-uncertainty measurement of the Boltzmann constant'". Metrologia, 53 (1). pp. 116-122.

de Podesta, M; Inseok Yang*,, ; Mark, D F*; Underwood, R; Sutton, G; Machin, G (2015) Correction of NPL-2013 estimate of the Boltzmann constant for argon isotopic composition and thermal conductivity. Metrologia, 52 (5). S353-S363

de Podesta, M; May, E F*; Mehl, J B*; Pitre, L*; Gavioso, R M; Benedetto, G*; Giuliano Albo, P A*; Truong, D*; Flack, D (2010) Characterization of the volume and shape of quasi-spherical resonators using coordinate measurement machines. Metrologia, 47 (5). pp. 588-604.

de Podesta, M; Sutton, G; Edwards, G J; Stanger, L; Preece, H (2015) Practical acoustic thermometry with twin-tube and single-tube sensors. In: 4th International Conference on Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 20-24 April 2015, Lisbon, Portugal.

de Podesta, M; Sutton, G; Underwood, R; Bell, S A; Stevens, M; Byrne, T; Josephs-Franks, P W (2011) Outgassing of water vapour, and its significance in experiments to determine the Boltzmann constant. Metrologia, 48 (1). L1-L6.

de Podesta, M; Sutton, G; Underwood, R; Perkin, M; Davidson, S; Morantz, P* (2011) Assessment of uncertainty in the determination of the Boltzmann constant by an acoustic technique. Int. J. Thermophysics, 32 (1-2). pp. 413-426.

de Podesta, M; Sutton, G; Underwood, R J; Legg, S*; Steinitz, A* (2010) Practical acoustic thermometry with acoustic waveguides. Int. J. Thermophysics, 31 (8-9). pp. 1554-1566.

de Podesta, M; Underwood, R; Sutton, G; Morantz, P*; Harris, P M (2013) Internal consistency in the determination of the Boltzmann constant using a quasispherical resonator. AIP Conf. Proc., 1552. pp. 17-22.

de Podesta, M; Underwood, R; Sutton, G; Morantz, P*; Harris, P M; Mark, D F*; Stuart, F M*; Vargha, G*; Machin, G (2013) A low-uncertainty measurement of the Boltzmann constant. Metrologia, 50 (4). pp. 354-376.

del CAmpo, D*; Machin, G (2013) A European project on high temperature metrology for industrials applications. Boletin de la Sociedad Espanola de ceramica y vidrio, 52 (4). V-VIII

del Campo, D*; Bojkovski, J*; Dobre, M*; Filipe, E*; Kalemci, M*; Merlone, A*; Pearce, J; Peruzzi, A*; Sparasci, F*; Strnad, R*; Taubert, D*; Turzo-Andras, E* (2014) Novel and improved techniques for traceable temperature dissemination. High Temp.-High Press., 43 (1). pp. 1-11.

E

Edler, F*; Morice, R*; Ogura, H*; Pearce, J (2010) Investigation of Co-C cells for improved thermocouple calibration. Metrologia, 47 (1). pp. 90-95.

Edler, F*; Morice, R*; Pearce, J (2008) Construction and investigation of PT/PD thermocouples in the frame of the EUROMET project 857. Int. J. Thermophysics, 29 (1). pp. 199-209.

Edwards, C S; Barwood, G P; Gill, P; Bell, S A; Stevens, M; Schirmer, B*; Melling, A*; Venzke, H*; Weber, H*; Benyon, R*; Mackrodt, P*; Nielsen, J*; de Groot, M J*; Pusterla, L* (2001) Development and evaluation of a tunable diode laser absorption spectrometer for trace humidity measurements. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Edwards, C S; Barwood, G P; Gill, P; Stevens, M; Schirmer, B*; Benyon, R*; Mackrodt, P* (2000) An IR tunable diode laser absorption spectrometer for trace humidity measurements at atmospheric pressure. IEEE Lasers and Electro-Optics Society Newsletter, 14 (5). pp. 13-14.

Edwards, G J; Levick, A P; Xie, Z (1996) Laser emissivity free thermometry (left). In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Eichstadt, S*; Wilkens, V*; Dienstfrey, A*; Hale, P*; Hughes, B; Jarvis, C* (2016) On challenges in the uncertainty evaluation for time-dependent measurements. Metrologia, 53 (4). S125-S135

Elkington, D (1999) The performance of portable extensometer calibration rigs. NPL Report. CMAM 45

Elliott, C; Pearce, J V; Failleau, G*; Deuze, T*; Briaudean, S*; Sadli, M*; Machin, G (2012) Fe-C eutectic fixed-point cells for contact thermometry: an investigation and comparison. Metrologia, 49 (1). pp. 88-94.

Elliott, C J; Failleau, G*; Deuze, T*; Sadli, M*; Pearce, J V; Machin, G (2014) Long-term monitoring of thermocouple stability with miniature fixed-point cells. Int. J. Thermophysics, 35 (3). pp. 560-573.

Elliott, C J; Greenen, A; Lowe, D; Pearce, J V; Machin, G (2015) High temperature exposure of in-situ thermocouple fixed-point cells: stability with up to three months continuous use. Metrologia, 52 (2). pp. 267-271.

Elliott, C J; Large, M J*; Pearce, J V; Machin, G (2014) Compatability of Materials for use at high temperatures with W-Re thermocouples. Int. J. Thermophysics, 35 (6-7). pp. 1202-1214.

Elliott, C J; Pearce, J; Machin, G (2012) High temperature sensors with self-calibrating capabilities: abstract and summary. NPL Report. ENG 37

Elliott, C J; Pearce, J; Machin, G (2012) User's manual for NPL designed and supplied self-validating thermocouples, and the associated breadboard. NPL Report. ENG 38

Elliott, C J; Pearce, J V; Machin, G; Ford, T*; Hicks, K* (2013) Pt/Pd thermocouple resilience over 327 operating hours in an industrial calibration laboratory. AIP Conf. Proc., 1552. pp. 549-553.

Esward, T J (2002) Finite element modelling of oil-operated piston-cylinder pressure balances: determining uncertainties in distortion coefficient predictions using the finite element method. NPL Report. CMAM 85

Evans, A A*; Macdonald, D A*; Giusca, C L; Leach, R K (2014) New method development in prehistoric stone tool research: evaluating use duration and data analysis protocols. Micron, 65. pp. 69-75.

F

Failleau, G*; Deuze, T*; Elliott, C J; Pearce, J V; Machin, G; Briaudeau, S*; Sadli, M* (2011) Development of an Fe-C eutectic fixed-point for the calibration and in-situ monitoring of thermocouples. In: 2nd IMEKO TC11 International Symposium Metrological Infrastructure, 15-17 June 2011, Cavtat, Dubrovnik Riviera, Croatia.

Failleau, G*; Elliott, C J; Deuze, T*; Pearce, J V; Machin, G; Sadli, M* (2014) Miniature fixed-point cell approaches for in-situ monitoring of thermocouple stability. Int. J. Thermophysics, 35 (6-7). pp. 1223-1238.

Feistel, R*; Wielgosz, R*; Bell, S A; Camoes, M F*; Cooper, J R*; Dexter, P*; Dickson, A G*; Fisicaro, P*; Harvey, A H*; Heinonen, M*; Hellmuth, O*; Kretzschmar, H J*; Lovell-Smith, J W*; McDougall, T J*; Pawlowicz, R*; Ridout, P*; Seitz, S*; Spitzer, P*; Stoica, D*; Wolf, H* (2016) Metrological challenges for measurements of key climatological observables: oceanic salinity and pH, and atmospheric humidity. Part 1: overview. Metrologia, 53 (1). R1-R11

Fellmuth, B*; Fischer, J*; Machin, G; Picard, S*; Steur, P P M*; Tamura, O*; White, D R*; Yoon, H* (2016) The kelvin redefinition and its mise en pratique. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150037

Fellmuth, B*; Head, D I; Pavese, F*; Szmyrka-Grazebyk, A*; Tew, W* (2001) Special problems when realising the triple point of hydrogen as a defining fixed point of the ITS-90. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Fellmuth, B*; Wolber, L*; Hermier, Y*; Pavese, F*; Steur, P P M*; Peroni, I*; Szmyrka-Grzebyk, A*; Lipinski, L*; Tew, W L*; Nakano, T*; Sakurai, H*; Tamura, O*; Head, D I; Hill, K D*; Steele, A G* (2005) Isotopic and other influences on the realization of the triple point of hydrogen. Metrologia, 42. pp. 171-193.

Ferrucci, M; Ametova, E*; Carmignato, S*; DeWulf, W* (2016) Evaluating the effects of detector angular misalignments on simulated computed tomography data. Precision Eng., 45. pp. 230-241.

Ferrucci, M; Leach, R K; Giusca, C L; Carmignato, S*; Dewulf, W* (2015) Towards geometrical calibration of X-ray computed tomography systems - a review. Meas. Sci. Technol., 26 (9). 092003

Fischer, J*; Fellmuth, B*; Gaiser, C*; Zandt, T*; Pitre, L*; Briaudeau, S*; Sparasci, F*; Truong, D*; Hermier, Y*; Gavioso, R M*; Guianvarc'h, C*; Albo, P A G*; Merlone, A*; Moro, F*; de Podesta, M; Sutton, G; Underwood, R; Machin, G; del Campo, D*; Segovia Puras, J*; Vega-Meza, D*; Petersen, J*; Hald, J*; Nielsen, L*; Valkiers, S*; Darquie, B*; Borde, C*; Chardonnet, C*; Daussy, C*; Gianfrani, L*; Castrillo, A*; Laporta, P*; Galzerano, G* (2013) The IMERAPlus joint research project for determinations of the Boltzmann constant. AIP Conf. Proc., 1552. pp. 1-10.

Fischer, J*; Gerasimov, S*; Hill, K D*; Machin, G; Moldover, M R*; Pitre, L*; Steur, P*; Stock, M*; Tamura, O*; Ugur, H*; White, D R*; Yang, I*; Zhang, J* (2008) Preparative Steps towards the new definition of the kelvin in terms of the Boltzmann constant. Int. J. Thermophysics, 28 (6). pp. 1753-1765.

Fischer, J*; de Podesta, M; Hill, K; Moldover, M*; Pitre, L*; Rusby, R; Steur, P*; Tamura, O*; White, R*; Wolber, L* (2011) Present estimates of the differences between thermodynamic temperatures and the ITS-90. Int. J. Thermophysics, 32 (1-2). pp. 12-25.

Flack, D (2014) CMM measurement strategies. Measurement Good Practice Guide. 41

Flack, D (2014) CMM probing. Measurement Good Practice Guide. 43

Flack, D (2011) CMM verification. Measurement Good Practice Guide. 42

Flack, D (2014) Callipers and micrometers. Measurement Good Practice Guide. 40

Flack, D R (2013) Co-ordinate measuring machine task-specific measurement uncertainties. Measurement Good Practice Guide. 130

Flack, D R (2000) Small angle generator final traceability report. NPL Report. CBTLM 3

Flack, D R; Bevan, K* (2005) Fundamental good practice guide in the design and interpretation of engineering drawings for measurement processes. Measurement Good Practice Guide. 79

Flack, D R; Hannaford, J (2006) Fundamental good practice in dimensional metrology. Measurement Good Practice Guide. 80

Flay, N; Leach, R K (2012) Application of the optical transfer function in x-ray computed tomography - a review. NPL Report. ENG 41

Forbes, A B (2012) Weighting observations from multi-sensor coordinate measuring systems. Meas. Sci. Technol., 23 (2). 025004

Forbes, A B; Harris, P M; Leach, R K (2003) The comparison of algorithm for the assessment of Type A1 surface texture reference artefacts. NPL Report. CMSC 33/03

Forbes, A B; Leach, R K (2009) Reducing the effects of measurement noise when determining surface texture parameters. In: 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia.

Forbes, A B; Leach, R K (2005) Self-calibration of a novel surface texture measuring instrument. In: Laser Mapping and Machine Performance VII (LAMDAMAP 2005), 25-27 June 2005, Cranfield University, UK.

Forbes, A B; Leach, R K; Brill, N* (2004) The Abbe principle, self-calibration and the design of co-ordinate measuring systems. In: 4th euspen International Conference, 31 May 2004 - 2 June 2004, Glasgow, UK.

Forbes, A B; Peggs, G N (1997) A large reference artefact for CMM verification. In: Laser Metrology and Machine performance III. UNSPECIFIED, pp. 393-400.

Foreman, M R; Giusca, C L; Coupland, J M*; Török, P*; Leach, R K (2013) Determination of the transfer function for optical surface topography measuring instruments - a review. Meas. Sci. Technol., 24 (5). 052001

Foreman, M R; Giusca, C L; Leach, R K; Coupland, J M* (2012) Determination of the transfer function for optical surface topography measuring instruments. NPL Report. ENG 36

Foreman, M R; Giusca, C L; Torok, P*; Leach, R K (2013) Phase-retrieved pupil function and coherent transfer function in confocal microscopy. J. Microsc., 251 (1). pp. 99-107.

Franks, A; Jackson, K; Yacoot, A (2000) A parabolic mirror x-ray collimator. Meas. Sci. Technol., 11. pp. 484-488.

Franks, A; Luty, M; Robbie, C J; Stedman, M (1998) A design study of a microthrust balance for space applications. Nanotechnology, 9 (2). pp. 61-66.

G

Gallegos, J G*; Benyon, R*; Avila, S*; Benito, A*; Gavioso, R M*; Mitter, H*; Bell, S A; Stevens, M; Bose, N*; Ebert, V*; Heinonen, M*; Sairanen, M*; Peruzzi, A*; Bosma, R*; Val'kova, R* (2015) An investigation of the comparative performance of diverse humidity sensing techniques in natural gas. J. Natural Gas Sci. Eng., 23. pp. 407-416.

Gallop, J C (1997) Microwave applications of high temperature superconductors. Supercond. Sci. Technol., 10. A120-A141

Gao, F*; Petzing, J N*; Coupland, J M*; Leach, R K (2007) Measurement of structured surfaces using stylus AFM and optical methods. In: 7th International Conference and 9th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 17-20 July 2007, Huddersfield, UK.

Gavioso, R M*; Ripa, D M*; Steur, P P M*; Gaiser, C*; Zandt, T*; Fellmuth, B*; de Podesta, M; Underwood, R; Sutton, G; Pitre, L*; Sparasci, F*; Risegari, L*; Gianfrani, L*; Castrillo, A*; Machin, G (2016) Progress towards the determination of the thermodynamic temperature with ultra-low uncertainty. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150046

Gee, R M*; Farley, R S*; Sax, P*; Benyon, R*; Stevens, M; Bose, N* (2008) An interlaboratory comparison of relative humidity and temperature probes using diverse generation techniques. Int. J. Thermophysics, 29 (5). pp. 1696-1708.

Geo, F*; Leach, R K; Petzing, J*; Coupland, J M* (2008) Surface measurement errors using commercial scanning white light interferometers. Meas. Sci. Technol., 19 (1). 015303

Giusca, C; Severn, I; Greenwood, J C (2007) The effect of hydraulic fluids on pressure balances. NPL Report. DEPC-EM 009

Giusca, C L; Claverley, J D; Sun, W J; Leach, R K; Helmli, F*; Chavigner, M P J* (2014) Practical estimation of measurement noise and flatness deviation on focus variation microscopes. CIRP Ann. - Manuf. Technol., 63 (1). pp. 545-548.

Giusca, C L; Evans, A A*; McDonald, D*; Leach, R K (2012) The effect of use duration on surface roughness measurements of stone tool. NPL Report. ENG 35

Giusca, C L; Forbes, A B; Leach, R K (2009) Comparison between GUM, Monte Carlo and bayesian uncertainty evaluation approaches for an areal surface texture measuring instrument. In: 14th International Congress of Metrology, 22-25 June 2009, Paris.

Giusca, C L; Forbes, A B; Leach, R K (2009) Uncertainty evaluation for a new traceable areal surface texture measuring instrument. In: 12th International Conference on Metrology and Properties of Engineering Surfaces, 8-10 July 2009, Rzeszów, Poland.

Giusca, C L; Leach, R K (2013) Calibration of the metrological characteristics of Coherence Scanning Interferometers (CSI) and Phase Shifting Interferometers (PSI). Measurement Good Practice Guide. 127

Giusca, C L; Leach, R K (2013) Calibration of the metrological characteristics of Imaging Confocal Microscopes (ICMs). Measurement Good Practice Guide. 128

Giusca, C L; Leach, R K (2013) Calibration of the metrological characteristics of contact stylus instruments. Measurement Good Practice Guide. 129

Giusca, C L; Leach, R K (2013) Calibration of the scales of areal surface topography measuring instruments: Part 3 Resolution. Meas. Sci. Technol., 24 (10). 105010

Giusca, C L; Leach, R K; Forbes, A B (2011) A virtual machine-based uncertainty evaluation for a traceable areal surface texture measuring instrument. Measurement, 44 (5). pp. 988-993.

Giusca, C L; Leach, R K; Helery, F* (2012) Calibration of the scales of areal surface topography measuring instruments: Part 2 Amplification, linearity and squarness. Meas. Sci. Technol., 23 (6). 065005

Giusca, C L; Leach, R K; Helery, F*; Gutauskas, T* (2011) Calibration of the geometrical characteristics of areal surface texture measuring instruments. In: 13th International Conference on Metrology and Properties of Engineering Surfaces., 12-15 April 2011, Twickenham Stadium, UK.

Giusca, C L; Leach, R K; Helery, F*; Gutauskas, T* (2011) Calibration of the geometrical characteristics of areal surface topography measuring instruments. J. Phys., Conf. Ser., 311. 012005

Giusca, C L; Smith, I M (2013) Areal lateral calibration software: user manual. NPL Report. ENG 45

Godden, T M*; Muniz-Piniella, A; Claverley, J D; Yacoot, A; Humphry, M J* (2016) A phase calibration target for quantitative phase imaging with ptychography. Opt. Express, 24 (7). pp. 7679-7692.

Greenwood, J C (2006) Simulation of the operation and characteristics of static expansion pressure standards. Vacuum, 80. pp. 548-553.

Greenwood, J C (2002) The 'correct' and 'incorrect' generation of a cosine distribution of scattered particles for Monte-Carlo modelling of vacuum systems. Vacuum, 67. pp. 217-222.

Greenwood, J C (2006) The reference gauge technique for static expansion rations- applied to NPL medium vacuum standard SEA3. Vacuum, 81 (4). pp. 427-433.

Greenwood, J C; Carroll, P (2007) Comparison of NPL high vacuum standards SEA2 and SEA5. NPL Report. DEPC-EM 012

Gunn, D; Walker, K (1999) Intercomparison of force standards between NPL, NIM and SCL. NPL Report. CMAM 33

Gunn, D A (1999) Intercomparison of force standards between NPL and CSIRO. NPL Report. CMAM 38

H

Hall, S R G; Cashmore, M T; Blackburn, J; Koutsourakis, G*; Gottschalg, R* (2016) Compressive current response mapping of photovoltaic devices using MEMS mirror arrays. IEEE Trans. Instrum. Meas., 65 (8). pp. 1945-1950.

Hansen, P-E*; Roebben, G*; Babick, F*; Boyd, R; Braun, A*; Busch, I*; Danzebrink, H-U*; Depero, L*; Dirscherl, K*; Dziomba, T*; Eriksson, E*; Franks, K*; Gee, M G; Jennett, N M; Kestens, V*; Koenders, L*; Krumrey, M*; Lausmaa, J*; Leach, R K; Pendrill, L*; Pidduck, A*; Put, S*; Roy, D; Stintz, M*; Turan, R*; Yacoot, A (2010) Introductory guide to nanometrology. Technical Report. European Commission.

Hao, L*; Klein, N*; Radcliffe, W J; Gallop, J C; Ghosh, I S* (1998) Temperature compensated cryogenic whispering gallery mode resonator for microwave frequency standard applications. In: CPEM '98 Conference on Precision Electromagnetic Measurements Conference Digest, 6-10 July 1998, Washington DC, USA.

Hao, X P*; McEvoy, H C; Machin, G; Yuan, Z D*; Wang, T J* (2013) A comparison of the In, Sn, Zn and Al fixed points by radiation thermometry between NIM and NPL and verification of the NPL blackbody reference sources from 156 °C to1000 °C. Meas. Sci. Technol., 24 (7). 075004

Harris, P M; Smith, I M; Leach, R K; Giusca, C; Jiang, X*; Scott, P* (2012) Software measurement standards for areal surface texture parameters: Part I - algorithms. Meas. Sci. Technol., 23 (10). 105008

Harris, P M; Smith, I M; Wang, C*; Giusca, C; Leach, R K (2012) Software measurement standards for areal surface texture parameters: Part II - comparison of software. Meas. Sci. Technol., 23 (10). 105009

Hart, A; Haycocks, J; Jackson, K; Law, A; Leach, R K (2002) Measurement of surface texture in CBTLM: a three-year review of instrument capabilities. NPL Report. CBTLM 21

Hart, A; Leach, R K (2001) Review of methods for cleaning surfaces prior to surface texture measurement as part of project LE9953, milestone 5.3.1.4. NPL Report. CBTLM 12

Hastings, M W*; Pearce, J V; Machin, G (2012) Electrical resistance breakdown of Type N mineral-insulated metal-sheathed thermocouples above 800 °C. Meas. Tech., 55 (8). pp. 941-948.

Havard, D C; Lewis, S L (1995) Initial stages in disseminating the UK mass scale: from the National Prototype Kilogram to the stainless steel reference kilograms. NPL Report. MOM 98

Hay, M*; Simpson, D (1999) Development of high-line differential pressure standards. NPL Report. CMAM 41

Haycocks, J (2005) Surface certainty (3D surface measurement). Metalwork. Prod., 149 (7). p. 31.

Haycocks, J; Jackson, K (2005) Traceable calibration of transfer standards for scanning probe microscopy. Precision Engineering, 29. pp. 168-175.

Haycocks, J; Jackson, K; Leach, R K; Garratt, J*; McDonnell, I*; Rubert, P*; Lamb, J*; Wheeler, S* (2005) Tackling the challenge of traceable surface texture measurement in three dimensions. In: 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 8-11 May 2005, Montpellier, France.

Haycocks, J; Jackson, K; Robbie, C J; Stedman, M (1997) Traceable metrology for scanning probe microscopes. In: Proc. 2nd Seminar on Quantitive Microscopy, November 1997, PTB, Germany.

He, B*; Petzing, J N*; Webb, D P*; Conway, P P*; Leach, R K (2012) The assessment of areal surface texture parameters for characterizing the adhesive bond strength of copper plated micro-machined glass. In: 12th euspen International Conference, 4-8 June 2012, Stockholm, Sweden.

He, B*; Petzing, J*; Webb, P*; Conway, P*; Leach, R K (2012) The use of areal surface texture parameters to characterize the mechanical bond strength of copper on glass plating applications. NPL Report. ENG 34

He, B*; Webb, D P*; Petzing, J*; Leach, R K (2011) Improving plated copper adhesion for metallisation of glass PCBs. In: International Conference on Electronic Packaging Technology and High Density packageing 2011 (ICEPT-HDP2011), 8-11 August 2011, Shanghai, China.

Head, D I (1994) EUROMET intercomparison of mercury triple point cells at NPL. NPL Report. QU 99

Head, D I (2001) Recent measurements of european deuterium cells at NPL. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Head, D I (1996) Recent measurements of the Deuterium triple point at NPL. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Head, D I; Davies, H; Gray, J; Quested, P N (2008) The comparison of MTDATA with the melting/freezing point curves of ITS-90 metal fixed points. Int. J. Thermophysics, 29 (5). pp. 1796-1807.

Head, D I; Gray, J; de Podesta, M (2009) Current work on furnaces and data analysis to improve the uniformity and noise levels for metal fixed points. Int. J. Thermophysics, 30 (1). pp. 296-305.

Head, D I; Rusby, R L; Martin, J E (1995) Cryogenic triple point cells at NPL. NPL Report. QM 116

Heinonen, M*; Anagnostou, M*; Bartolo, J*; Bell, S A; Benyon, R*; Bergerud, R A*; Bojkovski, J*; Bose, N*; Dinu, C*; Smorgon, D*; Flakiewicz, K*; Martin, M J*; Nedialkov, S*; Nielsen, M B*; Aytekin, S O*; Otych, J*; Pedersen, M*; Rujan, M*; Testa, N*; Turzo-Andras, E*; Vilbaste, M*; White, M* (2014) Comparison of air temperature calibrations. Int. J. Thermophysics, 35 (6-7). pp. 1251-1272.

Heinonen, M*; Anagnostou, M*; Bell, S A; Stevens, M; Benyon, R*; Bergerud, R A*; Bojkovski, J*; Bosma, R*; Nielsen, J*; Bose, N*; Cromwell, P*; Dogan, A K*; Aytekin, S*; Uytun, A*; Fernicola, V*; Flakiewicz, K*; Blanquart, B*; Hudokin, D*; Jacobson, P*; Kentved, A*; Loio, I*; Mamontov, G*; Masarykova, A*; Mitter, H*; Mnguni, R*; Otych, J*; Steiner, A*; Zsofia, N S*; Zvizdic, D* (2012) Investigation of the equivalence of national dew-point temperature realizations in the range -50 °C to +20 °C. Int. J. Thermophysics, 33 (8-9). pp. 1422-1437.

Henning, A J; Giusca, C; Forbes, A B; Smith, I; Leach, R K; Coupland, J*; Mandal, R* (2013) Correction for lateral distortion in coherence scanning interferometry. CIRP Ann. - Manuf. Technol., 62. pp. 547-550.

Henning, A J; Giusca, C L (2017) Considerations on the proposed linear theory of surface measurement for coherence scanning interferometers. Appl. Opt., 56 (10). pp. 2960-2967.

Henning, A J; Giusca, C L (2015) Errors and uncertainty in the topography gained via frequency-domain analysis. Opt. Express, 23 (18). pp. 24057-24070.

Henning, A J; Huntley, J M*; Giusca, C L (2015) Obtaining the transfer function of optical instruments using large calibrated reference objects. Opt. Express, 23 (13). pp. 16617-16627.

Hermier, Y*; Head, D I; Pitre, L*; Vergé, A*; Géneville, C*; Bonnier, G* (2001) A new generation of BNM INM MULTICOMPARMENT sealed cells for low temperature fixed points. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Heyer, D*; Noatsch, U*; Tegeler, E*; Anagnostou, M*; Turzo-Andres, E*; Antonsen, I*; Augevicius, V*; Bojkovski, J*; Bronnum, A*; Chimenti, V*; Duris, S*; Filipe, E*; Gaita,S*,, ; Gray, J; Head, D I; Grudniewicz, E*; Ivarsson, J*; Kalemci, M*; Kerkhof, O*; Lobo, I*; Nemeth, S*; Pokhodun, A*; Ranostaj, J*; Renaot, E*; Rosenkranz, P*; Smid, M*; Steur, P*; Steiner, A*; Valin, M*; Veliki, T*; Weckström, T* (2007) Intercomparison of the realization of the ITS-90 at the freezing points of Al and Ag between European NMIs. Int. J. Thermophysics, 28 (6). pp. 1964-1975.

Hiersemenzel, F*; Petzing, J N*; Leach, R K; Helmli, F S*; Singh, J* (2012) Areal texture and angle measurement of tilted surface using focus variation methods. In: International Conference on Surface Metrology (ICSM'2012), 21-23 March 2012, Annecy, France.

Hiersemenzel, F*; Singh, J*; Petzing, J N*; Claverley, J D; Leach, R K; Helmli, F* (2013) Development of a traceable performance verification route for optical micro-CMMs. In: Laser Metrology and Machine Performance X (LAMDAMAP 2013), 20-21 March 2013, Chichley, UK.

Hiersemenzel. F*,, ; Claverley, J D; Singh, J*; Petzing, J N*; Helmli, F*; Leach, R K (2013) ISO compliant reference artefacts for the verification of focus variation-based optical micro-coordinate measuring machines. In: Proceedings of the 13th euspen International Conference, 27-31 May 2013, Berlin, Germany.

Hiersmenzel, F*; Singh, J*; Petzing, J N*; Leach, R K; Helmli, F*; Danzl, R* (2012) The assessment of residual flatness errors in focus variation areal measuring instruments. In: 12th euspen International Conference, 4-8 June 2012, Stockholm, Sweden.

Hughes, B; Forbes, A B; Nasr, K; Sun, W J; Veal, D (2011) Validation of the network method for determination of laser tracker alignment errors: NIMTech deliverable 3.7. NPL Report. ENG 30

Hughes, B; Forbes, A B; Sun, W J (2011) Good practice for deployment and use of iGPS/iSPACE: NIMTech deliverable 3.1(2). NPL Report. ENG 31

Hughes, B; Forbes, A B; Sun, W J (2011) Procedure for calibration of laser tracker alignment errors using a network measurement: NIMTech deliverable 3.1(1). NPL Report. ENG 29

Hughes, E B; Ferrucci, M; Forbes, A B (2015) Preliminary investigation into the use of a network-based technique for calibration of 3D laser scanners. NPL Report. ENG 59

Hughes, E B; Forbes, A B; Lewis, A; Sun, W; Veal, D; Nasr, K (2011) Laser tracker error determination using a network measurement. Meas. Sci. Technol., 22 (4). 045103

Hughes, E B; Forbes, A B; Sun, W; Maropoulos, P*; Muelaner, J*; Jamshidi, J*; Wang, Z* (2010) iGPS capability study. NPL Report. ENG 23

Hughes, E B; Muelaner, J*; Martin, O* (2010) ViewNet reference network survey. NPL Report. ENG 22

Hughes, E B; Oldfield, S (2004) Thrust balance for ground testing of electric thrusters. In: 4th euspen International Conference, May 2004, Glasgow, UK.

Hughes, E B; Sun, W; Forbes, A B; Lewis, A (2010) Determining laser tracker alignment errors using a network measurement. J. CMSC, 5 (2). pp. 26-32.

I

In-Mook Choi*,, ; Robinson, I A (2014) An analysis and design of the mechanical characteristics of the knife edges used in the NPL watt balance. Metrologia, 51 (2). S114-S122

J

Jenkins, R; Knott, A J (1998) Force. Technical Report. NPL, Teddington.

Jiang, Z*; Palinkas, V*; Arias, F E*; Liard, J*; Merlet, S*; Wilmes, H*; Vitushkin, L*; Robertson, L*; Tisserand, L*; Dos Santos, F P*; Bodart, Q*; Falk, R*; Baumann, H*; Mizushima, S*; Maumikinen, J*; Bilker-Koivula, M*; Lee, C*; Choi, I M*; Karaboce, B*; Ji, W*; Wu, Q*; Ruess, D*; Ullrich, C*; Kostelecky, J*; Schmerge, D*; Eckl, M*; Timmen, L*; Le Moigne, N*; Bayer, R*; Olszak, T*; Aringgren, J*; Del Negro, C*; Greco, F*; Diament, M*; Deroussi, S*; Bonvalot, S*; Krynski, J*; Sekowski, M*; Hu, H*; Wang, L J*; Svitlov, S*; Germak, A*; Francis, O*; Becker, M*; Inglis, D*; Robinson, I A (2012) The 8th international comparison of absolute gravimeters 2009: the first key comparison (CCM.G-K1) in the field of absolute gravimetry. Metrologia, 49 (6). pp. 666-684.

Jones, C W; Chetwynd, D*; Singh, J*; Leach, R K (2011) Concept and modelling of a novel active triskelion low force transfer artefact. In: 11th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2011), 23-27 May 2011, Lake Como, Italy.

Jones, C W; Davidson, S; Kramer, J A*; Leach, R K; Pratt, J R* (2008) Comparison of NIST SI force scale to NPL SI mass scale. In: ASPE 2008 Annual Meeting, 19-24 October 2008, Portland, Oregon.

Jones, C W; Leach, R K (2008) Adding a dynamic aspect to amplitude-wavelength space. Meas. Sci. Technol., 19 (5). 055105

Jones, C W; Leach, R K (2008) Amplitude-wavelength space in three dimensions. In: 12th International Colloquium on Surfaces, 28-29 January 2008, Chemnitz, Germany.

Jones, C W; Leach, R K (2008) Review of low force transfer artefact technologies. NPL Report. ENG 5

Jusko, O*; Bosse, H*; Flack, D; Hemming, B*; Pisani, M*; Thalmann, R* (2012) A comparison of sensitivity standards in form metrology - final results of the EURAMET project 649. Meas. Sci. Technol., 23 (5). 054006

K

Kautt, M*; Anson, S M*; Saile, V*; Scholz, S*; Fugier, P*; Lambertini, V*; Abad, E*; Dirne, F*; Loeschner, H*; Leach, R K (2009) Facilitating open innovation in micro and nano technology by providing open access to a pan-European toolbox called EUMINAfab. In: 4M/ICOMM 2009 Conference, 23-25 September 2009, Forschungszentrum Karlruhe, Germany.

Kearney, A (1999) Provision of technology transfer clubs for pressure, humidity and mechanical metrology. ITT no. MPU8/45.7. April 1997 to September 1999. NPL Report. CMAM 44

Kibble, B P (2001) Essay review - What is mass? Contemp. Phys., 42 (1). pp. 61-63.

Kibble, B P*; Robinson, I A (2014) Principles of a new generation of simplified and accurate watt balances. Metrologia, 51 (2). S132-S139

Kim, M S*; Pratt, J R*; Brand, U*; Jones, C W (2012) Report on the first international comparison of small force facilities: a pilot study at the micronewton level. Metrologia, 49 (1). pp. 70-81.

Kim, M-S*; Pratt, J R*; Brand, U*; Jones, C W (2012) Report on the first international comparison of small force facilities: a pilot study at the micronewton level. Metrologia, 49 (1). pp. 70-81.

Klapetek, P*; Nacas, D*; Campbellova, A*; Yacoot, A; Koenders, L* (2011) Methods for determining and processing 3D errors and uncertainties for AFM data analysis. Meas. Sci. Technol., 22 (2). 025501

Klapetek, P*; Picco, L*; Payton, O*; Yacoot, A; Miles, M* (2013) Error mapping of high-speed AFM systems. Meas. Sci. Technol., 24 (2). 025006

Klapetek, P*; Valtr, M*; Picco, L*; Payton, O D*; Martinek, J*; Yacoot, A; Miles, M* (2015) Large area high-speed metrology SPM system. Nanotechnology, 26 (6). 065501

Klapetek, P*; Yacoot, A; Grolich, P*; Valtr, M*; Necas, D* (2017) Gwyscan: a library to support non-equidistant scanning probe microscope measurements. Meas. Sci. Technol., 28 (3). 034015

Knazovicka, L*; Lowe, D; Machin, G; Davies, H; Rani, A* (2015) Stability of cobalt-carbon high temperature fixed points doped with iron and platinum. Metrologia, 52 (2). pp. 353-359.

Knott, A; Machado, R R* (2016) Force supplementary comparison EURAMET.M.F-S3 (1 kN, 2 kN, 5 kN and 10 kN). Metrologia, 53 (1A). 07015.

Knott, A J (2001) CIPM 10kN key comparison. NPL results. NPL Report. CMAM 67

Knott, A J (2004) Developments at NPL to improve calibration of force and torque. Meas. Control, 37 (8). pp. 246-251.

Knott, A J (1999) Uncertainty of force generation for forces above 1.2MN. NPL Report. CMAM 47

Knott, A J; Ibrahim, M*; Hasan, E*; Aggag, G* (2006) Comparison of force standards between NIS-Egypt and NPL - United Kingdom. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Kocas, I*; Sabuga, W*; Bergoglio, M*; Eltaweel, A*; Korasie, C*; Farar, P*; Setina, J*; Waller, B; Durgut, Y* (2015) Final report on key comparison EURAMET.M.P-K13 in the range 50 MPa to 500Mpa of hydraulic gauge pressure. Metrologia, 52 (1A). 07008.

L

Lancaster, A; Dury, M (2017) Measurement of the surface texture of large roller bearings. Measurement Good Practice Guide. 148

Langham, C D; Gallop, J C (1997) Cryogenic dielectric resonators: performance and potential. IEEE Trans. Instrum. Meas., 46 (2). pp. 130-132.

Large, M J*; Pearce, J V (2014) A phase-field solidification model of almost pure ITS-90 fixed points. Int. J. Thermophysics, 35 (6-7). pp. 1109-1126.

Law, A; Leach, R K (2001) Use of a polymer film bridge to measure the contact force applied by instruments used in the measurement of surface textures. NPL Report. CBTLM 14

Lazzerini, G M; Paterno, G M*; Tregnago, G*; Treat, N*; Stingelin, N*; Yacoot, A; Cacialli, F* (2016) Traceable atomic force microscopy of high-quality solvent-free crystals of [6,6]-phenyl-C 61-butyric acid methyl ester. Appl. Phys. Lett., 108 (5). 053303

Leach, R K (1999) Calibration, traceability and uncertainty issues in surface texture metrology. NPL Report. CLM 7

Leach, R K (2001) Current problems in the field of surface texture measurement. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Leach, R K (2010) Engineering the surface to affect its function. Measurement and Control, 43 (9). pp. 278-279.

Leach, R K (1998) Measurement of a correction for the phase change on reflection due to surface roughness. Proc. SPIE - Int. Soc. Opt. Eng., 3477. pp. 138-151.

Leach, R K (2008) Metrology for micro- and nanotechnology: some perspectives on requirements. Micro Manufacturing, 08 (08). pp. 18-21.

Leach, R K (2009) Metrology for nanotechnology. Qual. Manufact. Today (Septem). pp. 28-29.

Leach, R K (2002) Miniature machine plugs metrology gap. Phys. World, 15 (6). pp. 27-28.

Leach, R K (2004) Some issues of traceability in the field of surface topography measurement. In: Proceedings of the 9th International Conference on Metrology and Properties of Engineering Surfaces, April 2004, Sweden.

Leach, R K (2004) Some issues of traceability in the field of surface topography measurement. Wear, 257. pp. 1246-1249.

Leach, R K (2002) Surface texture - stylus v optical? Qual. Today (Januar). S18-S20

Leach, R K (2004) Surface texture metrology: more than just skin deep. Eng. Technol. (March). pp. 42-43.

Leach, R K (2000) Telling the rough from the smooth. Mater. World (Februa). pp. 18-19.

Leach, R K (2013) Thinking outside the Bento Box: NPL develops a new set of calibration artefacts for areal surface topography measurement. Qual. Manufact. Today (Nov/De). pp. 20-23.

Leach, R K (2002) Traceable measurements of surface texture in the optics industry. Proc. SPIE - Int. Soc. Opt. Eng., 4411. pp. 177-183.

Leach, R K (2002) The importance of metrology and standardisation for micro-systems technology. In: 7th International Conference on Commercialisation of Micro and Nano Systems, 8-12 September 2002, Michigan, USA.

Leach, R K (2009) The measurement and characterisation of three dimensional surface texture - a bright future for advanced manufacturing. Qual. Manufact. Today (Jan - ). pp. 37-38.

Leach, R K (2009) The measurement and characterisation of three dimensional surface texture - a bright future for advanced manufacturing. MST News (1). pp. 8-9.

Leach, R K (2014) The measurement of surface texture using stylus instruments. Measurement Good Practice Guide. 37

Leach, R K (1995) A novel 3-axis CMM probe calibration facility. NPL Report. MOM 126

Leach, R K (2001) A recent comparison of stylus and optical methods for measuring surface texture. In: 9th IMEKO Symposium Metrology for Quality Control in Production; Surface Metrology for Quality Assurance., 24-27 September 2001, Cairo, Egypt.

Leach, R K; Bennett, I* (2004) Characterisation of a new vertical scanning white light interferometer - a test case? In: 11th International Colloquium on Surfaces, 2-3 February 2004, Chemnitz, Germany.

Leach, R K; Blunt, L*; Chetwynd, D G*; Yacoot, A (2001) The need for a metrology infrastructure to support nanotechnology. In: Proceedings of the 5th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII), 25-29 September 2001, Cairo, Egypt.

Leach, R K; Boyd, R; Burke, T*; Danzebrink, H-U*; Dirscherl, K*; Dziomba, T*; Gee, M G; Koenders, L*; Morazzani, V*; Pidduck, A*; Roy, D; Unger, W E S*; Yacoot, A (2011) The European nanometrology landscape. Nanotechnology, 22. 062001

Leach, R K; Brown, L*; Jiang, X*; Blunt, R*; Conroy, M*; Mauger, D* (2008) Guide to the measurement of smooth surface topography using coherence scanning interferometry. Measurement Good Practice Guide. 108

Leach, R K; Claverley, J D; Giusca, C; Jones, C W; Nimishakavi, L P; Sun, W; Tedaldi, M; Yacoot, A (2012) Advances in engineering nanometrology at the National Physical Laboratory. Meas. Sci. Technol., 23 (7). 074002

Leach, R K; Coupland, J*; Mandal, R*; Giusca, C; Foreman, M* (2012) Calibration of areal surface topography measuring instruments: are we there yet? In: 27th Annual Meeting of the American Society for Precision Engineering., 21-26 October 2012, San Diego, CA, USA.

Leach, R K; Cross, N R (2002) Low-cost traceable dynamic calibration of surface texture measuring instruments. Meas. Sci. Technol., 13. N1-N4.

Leach, R K; Cui, Z*; Flack, D R (2003) Microsystems technology standardisation roadmap. Technical Report. NPL, UK.

Leach, R K; Cui, Z*; Lewis, A; Singleton, L* (2004) Standardisation of microsystems technology: completion of the MEMSTAND project. MST News, 1 (Februa). pp. 39-41.

Leach, R K; Evans, C*; He, L*; Davies, A*; Duparre, A*; Henning, A J; Jones, C W; O'Connor, D (2015) Open questions in surface topography measurement: a roadmap. Surf. Topogr.: Metrol. Prop., 3 (1). 013001

Leach, R K; Flack, D R; Hughes, E B; Jones, C W (2007) Development of a new traceable areal surface texture measuring instrument. In: 11th International Conference on Metrology & Properties of Engineering Surfaces., 17-20 July 2007, Huddersfield, UK.

Leach, R K; Flack, D R; Hughes, E B; Jones, C W (2009) Development of a new traceable areal surface texture measuring instrument. Wear, 266. pp. 552-554.

Leach, R K; Garbutt, I; Cox, M G (2001) Sinusoidally modulated reference artefacts for calibration of surface texture measuring instruments. In: Proceedings of 2nd European Society for Precision Engineering and Nanotechnology (Euspen) International Conference, 27-31 May 2001, Turin, Italy.

Leach, R K; Garbutt, I; Harris, P; Cox, M G (2001) Production, measurement and analysis of sinusoidal artefacts for calibration of surface texture measuring instruments. NPL Report. CBTLM 7

Leach, R K; Giusca, C (2009) Results from a comparison of optical thin film thickness measurement. NPL Report. ENG 18

Leach, R K; Giusca, C (2008) Traceable measurement of areal surface texture. In: Proceedings of the 4th International Conference on Multi-Material Micro Manufacture (4M 2008), 9-11 September 2008, Cardiff, UK.

Leach, R K; Giusca, C; Guttmann, M*; Jakobs, P J*; Rubert, P* (2015) Development of low-cost material measures for calibration of the metrological characteristics of areal surface texture instruments. CIRP Ann. - Manuf. Technol., 64 (1). pp. 545-548.

Leach, R K; Giusca, C; Naoi, K* (2009) Traceability for areal surface texture measurement. In: 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia.

Leach, R K; Giusca, C; Naoi, K* (2010) Traceability for areal surface texture measurement. Key Eng. Mater., 437. pp. 121-125.

Leach, R K; Giusca, C; Rickens, K*; Riemer, O*; Rubert, P* (2014) Development of material measures for performance verifying surface topography measuring instruments. Surf. Topogr.: Metrol. Prop., 2 (2). 025002

Leach, R K; Giusca, C L (2012) Determination of the metrological characteristics of optical areal surface topography measuring instruments. Proc. SPIE - Int. Soc. Opt. Eng., 8430. 84300Q

Leach, R K; Giusca, C L; Coupland, J M* (2012) Advances in calibration methods for micro- and nanoscale surfaces. Proc. SPIE - Int. Soc. Opt. Eng., 8430. 84300H

Leach, R K; Giusca, C L; Henning, A; Sherlock, B; Coupland, J* (2014) ISO definition of resolution for surface topography measuring instruments. In: Fringe 2013 - 7th International Workshop on Advanced Optical Imaging and Metrology. Springer, pp. 405-410. ISBN 9783642363580

Leach, R K; Giusca, C L; Naoi, K* (2009) Development and characterisation of a new instrument for the traceable measurement of areal surface texture. Meas. Sci. Technol., 20 (12). 125102

Leach, R K; Giusca, C L; Rubert, P* (2013) A single set of material measures for the calibration of areal surface topography measuring instruments: the NPL Areal Bento Box. In: Metrology and Properties of Engineering Surfaces, 2013: Proceedings of the 14th International Conference (14th MPES), 17-21 June 2013, Taipei, Taiwan.

Leach, R K; Giusca, C*; Naoi, K* (2009) A traceability infrastructure for three-dimensional surface measurements at the National Physical Laboratory. In: Proceedings of the 9th euspen International Conference, 2-5 June 2009, San Sebastian, Spain.

Leach, R K; Haitjema, H* (2010) Bandwidth characteristics and comparisons of surface texture measuring instruments. Meas. Sci. Technol., 21 (3). 032001

Leach, R K; Harris, P M (2002) Ambiguities in the definition of spacing parameters for surface texture characterisation. Meas. Sci. Technol., 13. pp. 1924-1930.

Leach, R K; Harris, P M (2006) Softgauges for surface texture. Qual. Today (March). pp. 12-14.

Leach, R K; Harris, P M (2004) Uncertain about surfaces? [surface texture measurement]. Qual. Today (Februa). pp. 24-25.

Leach, R K; Harris, P M; Smith, I; Giusca, C L; Jiang, X*; Scott, P* (2013) Software measurement standards for areal surface texture parameters. In: Metrology and Properties of Engineering Surfaces, 2013: Proceedings of the 14th International Conference (14th MPES)., 17-21 June 2013, Taipei, Taiwan.

Leach, R K; Hart, A (2000) EUROMET Project 413: inter-laboratory comparison of measurements of the phase correction in the field of guage block interforometry. Metrologia, 37. pp. 261-267.

Leach, R K; Hart, A (2001) Investigation into the shape of diamond styli used for surface texture measurement. NPL Report. CBTLM 10

Leach, R K; Hart, A (2002) A comparison of stylus and optical methods for measuring 2D surface textures. NPL Report. CBTLM 15

Leach, R K; Hart, A; Jackson, K (1999) Measurement of gauge blocks by interferometry: an investigation into the variability in wringing film thickness. NPL Report. CLM 3

Leach, R K; Jackson, K; Hart, A (1997) Design of two systems to measure the phase change at reflection and one system to measure the variability in contact error due to wringing. NPL Report. MOT 10

Leach, R K; Jackson, K; Hart, A (1997) Measurement of gauge blocks by interferometry: measurement of the phase change at reflection. NPL Report. MOT 11

Leach, R K; Jones, C W (2009) Towards a traceable infrastructure for low force measurements. IFIP International Federation for Information Processing, 260. pp. 307-314.

Leach, R K; Jones, C W; Sherlock, B; Krysinski, A* (2013) Metrology challenges for highly parallel micro-manufacture. In: 4M 2013 - Proceedings of the 10th International Conference on Multi-Material Micro Manufacture., 8-10 October 2013, San Sebastian, Spain.

Leach, R K; Jones, C W; Sherlock, B; Krysinski, A* (2013) The high dynamic range surface metrology challenge. In: 28th Annual Meeting of the American Society for Precision Engineering., 20-25 October 2013, St. Paul, Minnesota, USA.

Leach, R K; Lewis, A; Singleton, L*; Cui, Z* (2003) Towards a standardisation roadmap for micro-systems technology: review of the MEMSTAND survey. In: Proceedings of euspen "Transferring Micro-systems Technology though the Commercial Markets"., 14-15 April 2003, NPL,UK.

Leach, R K; Li, T*; Jiang, X*; Blunt, L*; Giusca, C (2010) Comparison of commercial software packages for calculating surface texture parameters. In: 10th International Conference of the European Society for Precision Engineering & Nanotechnology (euspen), 31 May - 4 June 2010, Delft, Netherlands.

Leach, R K; Murphy, J (2004) The design of co-ordinate measuring probe for characterising truly three-dimensional micro-structures. In: 4th euspen International Conference, 31 May 2004 - 2 June 2004, Glasgow, UK.

Leach, R K; Murphy, J; Wilson, A (2004) Design of a co-ordinate measuring probing system for characterising three-dimensional micro-structures. NPL Report. CBTLM 30

Leach, R K; Oldfield, S; Awan, S A; Blackburn, J; Williams, J M (2004) Design of a bi-directional electrostatic actuator for realising nanonewton to micronewton forces. NPL Report. DEPC-EM 001

Leach, R K; Weckenmann, A*; Coupland, J*; Hartmann, W* (2014) Interpreting the probe-surface interaction of surface measuring instruments, or what is a surface? Surf. Topogr.: Metrol. Prop., 2 (3). 035001

Leach, R K*; Giusca, C L; Haitjema, H*; Evans, C*; Jiang, X* (2015) Calibration and verification of areal surface texture measuring instruments. CIRP Ann. - Manuf. Technol., 64 (2). pp. 797-813.

Lee-Bennett, I*; Leach, R K (2004) Metrology for microsystems - characterisation of a new broadband interferometer. In: 4th euspen International Conference, 31 May 2004 - 2 June 2004, Glasgow, UK.

Leonard, F*; Brown, S B; Withers, P J*; Mummery, P M*; McCarthy, M B (2014) A new method of performance verification for x-ray computed tomography measurements. Meas. Sci. Technol., 25 (6). 065401

Levick, A P; Land, D*; Hand, J* (2011) Validation of microwave radiometry for measuring the internal temperature of human tissue. Meas. Sci. Technol., 22 (6). 065801

Levick, A P; Piachaud, T*; de Podesta, M (2011) Radiation thermometry based on photonic crystal fibre. Int. J. Thermophysics, 32 (1-2). pp. 372-382.

Lewis, A (1994) Measurement of length, surface form and thermal expansion coefficient of length bars up to 1.5 m using multiple-wavelength phase-stepping interferometry. Meas. Sci. Technol., 5. 694 - 703

Lewis, A (2008) Uncertainty budget for the NPL-UCL swing arm profilometer operating in comparator mode. NPL Report. ENG 9

Lewis, A J (2006) Final report on EUROMET key comparison EUROMET.L-K2: calibration of long gauge blocks. Metrologia, 43 (Tech. ). 04003.

Lewis, A J (2003) Key comparison CCL-K2 - measurement of long gauge blocks - final report. Metrologia, 40 (Tech. ). 04004.

Lewis, A J (2003) A fully traceable miniature CMM with sub-micrometre uncertainty. Proc. SPIE - Int. Soc. Opt. Eng., 5190. pp. 265-276.

Lewis, A J; Campbell, M; Stavroulakis, P (2016) Performance evaluation of a cheap, open source, digital environmental monitor based on the Raspberry Pi. Measurement, 87. pp. 228-235.

Lewis, A J; Hughes, E B; Aldred, P J E* (2010) Long term study of gauge block interferometer performance and gauge blocks stability. Metrologia, 47 (4). pp. 473-486.

Lewis, S L; Havard, D C (1996) History of Kilogram 18 and other important UK reference mass. NPL Report. MOT 1

Li, T*; Leach, R K; Jiang, X*; Blunt, L A* (2009) Comparison of type F2 software measurement standards for surface texture. NPL Report. ENG 16

Lobera, J*; Gao, F*; Coupland, J*; Leach, R K (2008) Limitations and innovations in scanning white light interferometry. In: euspen 2008, 18-22 May 2008, Zurich.

Lockmuller, N; Redgrove, J; Kubicar, L* (2003) Measurement of thermal conductivity with the needle probe. High Temp.-High Press., 35-36 (2). pp. 127-138.

Lovell-Smith, J W*; Feistel, R*; Harvey, A H*; Hellmuth, O*; Bell, S A; Heinonen, M*; Cooper, J R* (2016) Metrological challenges for measurements of key climatological observables. Part 4: atmospheric relative humidity. Metrologia, 53 (1). R40-R59

Lowe, D; Battuello, M*; Machin, G; Girard, F* (2003) A comparison of size of source effect measurements of radiation thermometers between IMGC and NPL. AIP Conf. Proc., 684 (2). pp. 625-630.

Lowe, D; Machin, G (2001) Development of metal carbon eutectic blackbody cavities to 2500 ºC at NPL. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Lowe, D; Machin, G (2004) High-temperature fixed-points at the National Physical Laboratory. In: SICE 2004 Annual Conference, 4-6 August 2004, Sapporo, Japan.

Lowe, D; McEvoy, H C; Machin, G (2003) Design and construction of a new primary standard pyrometer at NPL. AIP Conf. Proc., 684 (2). pp. 553-558.

Lowe, D; Yamada, Y* (2006) Reproducible metal-carbon eutectic fixed-points. Metrologia, 43 (2). S135-139

Lowe, D H (2016) Use of a phenomenological chemical scale for the identification of high distribution coefficient impurities within the ITS-90. IOP Conf. Ser.: Mater. Sci. Eng., 117. 012026

Lowe, D H; Todd, A D W*; Van den Bossche, R*; Bloembergen, P*; Anhalt, K*; Ballico, M*; Bourson, F*; Briaudeau, S*; Campos, J*; Cox, M G; del Campo, D*; Dury, M R; Gavrilov, V*; Grigoryeva, I*; Hernanz, M L*; Jahan, F*; Khlevnoy, B*; Khromchenko, V*; Lu, X*; Machin, G; Mantilla, J M*; Martin, M J*; McEvoy, H C; Rougie, B*; Sadli, M*; Salim, S G R*; Sasajima, N*; Taubert, D R*; van der Ham, E*; Wang, T*; Wei, D*; Whittam, A; Wilthan, B*; Woods, D J*; Woodward, J T*; Woolliams, E R; Yamada, Y*; Yamaguchi, Y*; Yoon, H W*; Yuan, Z* (2017) The equilibrium liquidus temperatures of rhenium-carbon, platinum-carbon and cobalt-carbon eutectic alloys. Metrologia, 54 (3). pp. 390-398.

Lowe, D H B (2013) A pyrometer for calibration traceable to a future thermodynamic temperature scale. Meas. Sci. Technol., 24 (1). 015901

Lowe, D H B; Broughton, M*; Machin, G; Willmott, J R* (2015) Comparison of extrapolated and interpolated temperature scales from 1000 °C to 2500 °C between a national measurement institute and an ISO17025 accredited calibration laboratory. Measurement, 76. pp. 129-135.

Lowe, D H B; Heufelder, S* (2013) Effect of solid-liquid interface velocity on the measured upper and lower limits of the liquidus temperature of cobalt-carbon eutectic fixed points. Metrologia, 50 (3). pp. 227-234.

Lowe, D H B; Kodwani, D* (2015) Zinc-bismuth and aluminium-indium monotectic alloy-based fixed-point cells with double phase transition for in-situ calibration of thermocouples. Int. J. Thermophysics, 36 (10-11). pp. 2654-2665.

Lowe, D H B; Machin, G (2012) Evaluation of methods for characterizing the melting curves of a high temperature cobalt-carbon fixed-point to define and determine its melting temperature. Metrologia, 49. pp. 189-199.

Lowe, D H B; Machin, G; Sadli, M* (2015) Correction of temperature errors due to the unknown effect of window transmission on ratio pyrometers using an in-situ calibration standard. Measurement, 68. pp. 16-21.

M

MacAulay, G D*; Senin, N*; Giusca, C L; Leach, R K (2014) Comparison of segmentation techniques to determine the geometric parameters of structured surfaces. Surf. Topogr.: Metrol. Prop., 2 (4). 044004

MacAulay, G D*; Senin, N*; Giusca, C L; Leach, R K; Ivanov, A* (2015) Review of feature boundary identification techniques for the characterization of tessellated surfaces. Surf. Topogr.: Metrol. Prop., 3 (1). 013002

Macaulay, G D; Giusca, C L (2016) Assessment of uncertainty in structured surfaces using metrological characteristics,. CIRP Ann., 65 (1). pp. 533-536.

Macaulay, G D; Senin, N*; Giusca, C L; Leach, R K (2016) Study of manufacturing and measurement reproducibility on a laser textured structured surface. Measurement, 94. pp. 942-948.

Macdonald, A*; Petrova, N*; Ainarkar, S*; Allen, J*; Plassmann, P*; Whittam, A; Bevans, J*; Ring, F*; Kluwe, B*; Simpson, R (2017) Thermal symmetry of healthy feet: a precursor to a thermal study of diabetic feet prior to skin breakdown. Physiol. Meas., 38 (1). pp. 33-44.

Macfarlane, J*; Peden, D*; Hao, L*; Gallop, J C; Romans, E* (1997) Effect of junction noise in a resistive high Tc SQUID noise thermometer. Appl. Supercond.. pp. 723-726.

Machin, G (2013) Essential measurement. Meas. Control, 46 (3). pp. 90-96.

Machin, G (2012) HiTeMS: A pan-European project to solve high temperature measurement problems in industry. Meas. Control, 45 (10). pp. 315-318.

Machin, G (2012) Innovations in high temperature measurement. Meas. Control, 45 (5). pp. 141-144.

Machin, G (2012) Measuring the temperature of industrial success. AWE Int., 30 (June). pp. 59-63.

Machin, G (1997) The NPL high temperature radiation thermometry calibration facility. NPL Report. CBTM 3

Machin, G (2009) Progress in high temperature measurement standards at NPL. In: Metrologia 09 - International Congress of Metrologia 2009, 10 March 2009, Lisbon, Portugal.

Machin, G (2008) Realising the benefits of improvements in high temperature metrology. Acta Metrologica Sinica, 29 (4A). pp. 10-17.

Machin, G (1998) Report on NIST/NRLM infrared thermometer intercomparison to 3000 C: report to fulfil NMS milestone Q311d8. NPL Report. CBTM 4

Machin, G (2016) Towards implementing the new kelvin. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150053

Machin, G (2013) Twelve years of high temperature fixed point research: a review. AIP Conf. Proc., 1552. pp. 305-316.

Machin, G (2006) A paradigm change in high temperature metrology. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Machin, G; Anhalt, K*; Battuello, M*; Bourson, F*; Dekker, P*; Diril, A*; Edler, F*; Elliott, C J; Girard, F*; Greenen, A; Knazovicka, L*; Lowe, D; Pavlasek, P*; Pearce, J V; Sadli, M*; Strnad, R*; Seifert, M*; Vuelban, E M* (2016) The European project high temperature measurement solutions in industry (HiTeMS) - a summary of achievements. Measurement, 78. pp. 168-179.

Machin, G; Anhalt, K*; Bloembergen, P*; Sadli, M*; Yamada, Y*; Meyer, C W* (2013) Progress report for the CCT-WG5 high temperature fixed point research plan. AIP Conf. Proc., 1552. pp. 317-322.

Machin, G; Anhalt, K*; Edler, F*; Pearce, J V; Sadli, M*; Strnad, R*; Vuelban, E M* (2013) HiTeMs: a project to solve high temperature measurement problems in industry. AIP Conf. Proc., 1552. pp. 958-963.

Machin, G; Beynon, G*; Edler, F*; Fourrez, S*; Hartmann, J*; Lowe, D; Morice, R*; Sadli, M*; Villamanan, M (2003) HIMERT: a pan-european project for the development of metal-carbon eutectics as temperature standards. AIP Conf. Proc., 684 (1). pp. 285-290.

Machin, G; Bloembergen, P*; Anhalt, K*; Hartmann, J*; Sadli, M*; Saunders, P*; Woolliams, E R; Yamada, Y*; Yoon, H* (2010) Practical implementation of the mise-en-pratique for the definition of the kelvin above the silver point. Int. J. Thermophysics, 31 (8-9). pp. 1779-1788.

Machin, G; Bojkovski, J*; del Campo, D*; Dogan, A K*; Fischer, J*; Hermier, Y*; Merlone, A*; Nielsen, J*; Peruzzi, A*; Ranostaj, J*; Strnad, R* (2014) A European roadmap for thermometry. Int. J. Thermophysics, 35 (3). pp. 385-394.

Machin, G; Castro, P*; Levick, A P; Villamanan, M A* (2011) Temperature effects of imperfectly formed metal-ingots in high temperature fixed point crucibles. Measurement, 44 (4). pp. 738-742.

Machin, G; Childs, C* (2010) A systematic performance evaluation of brain and body temperature sensors using ultra-stable temperature references. J. Med. Eng. Technol., 34 (3). pp. 192-199.

Machin, G; Chu, B (1998) A transportable gallium melting point blackbody for radiation thermometry calibration. Meas. Sci. Technol., 9 (10). pp. 1653-1656.

Machin, G; Dong, W*; Martin, M J*; Lowe, D; Yuan, Z*; Wang, T*; Lu, X* (2011) Estimation of the degree of equivalence of the ITS-90 above the silver point between NPL, NIM and CEM using high temperature fixed points. Metrologia, 48 (3). pp. 196-200.

Machin, G; Dong, W*; Martin, M J*; Lowe, D; Yuan, Z*; Wang, T*; Lu, X* (2010) A comparison of the ITS-90 among NPL, NIM and CEM above the silver point using high temperature fixed points. Int. J. Thermophysics, 31 (8-9). pp. 1466-1476.

Machin, G; Engert, J*; Gavioso, R M*; Sadli, M*; Woolliams, E (2016) Summary of achievements of the European Metrology Research Programme Project 'Implementing the new Kelvin' (InK 1). Measurement, 94. pp. 149-156.

Machin, G; Engert, J*; Gavioso, R M*; Sadli, M*; Woolliams, E R (2014) The Euramet metrology research programme project implementing the new Kelvin (InK). Int. J. Thermophysics, 35 (3). pp. 405-416.

Machin, G; Fischer, J*; Moldover, M*; Saunders, J*; Trusler, M*; White, R* (2015) Towards implementing the new kelvin. Measurement, 74. pp. 113-115.

Machin, G; Johnson, B C*; Gibson, C*; Rusby, R L (1994) Intercomparison of the ITS-90 radiance temperature scales of the National Physical Laboratory (U.K.) and the National Institute of Standards and Technology. J. Res. Natl. Inst. Stand. Technol., 99 (6). 731 - 736

Machin, G; McEvoy, H C; Boyes, S J (1996) A realisation of the palladium point at the NPL. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Machin, G; Pearce, J (2012) Step change improvements in high temperature thermocouple thermomery. In: 2012 UKACC International Conference on Control (CONTROL), 3-5 September 2012, Cardiff, UK.

Machin, G; Rocolfi, T*; Battuello, M*; Negro, G*; Jung, H-J*; Bloembergen, P*; Bosma, R*; Ivarsson, J*; Weckstrom, T* (1996) Comparison of the ITS-90 using a transfer standard infrared radiation thermometer between seven EU national measurement institutes. Metrologia, 33 (3). pp. 197-206.

Machin, G; Rusby, R L; McEvoy, H C; Simpson, R (2006) Traceability and calibration in temperature measurement: a clinical necessity. J. Med. Eng. Technol., 30 (4). pp. 212-217.

Machin, G; Sergienko, R* (2001) A comparative study of size of source effect (SSE) determination techniques. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Machin, G; Simpson, R (2003) Tympanic thermometer performance validation by use of a body temperature fixed point blackbody. Proc. SPIE - Int. Soc. Opt. Eng., 5073. pp. 51-7.

Machin, G; Simpson, R G; Broussely, M (2009) Calibration and validation of thermal imagers. Quantitative Infrared Thermography, 6 (2). pp. 133-147.

Machin, G; Simpson, R G; Broussely, M (2008) Calibration and validation of thermal imagers. In: 9th International Conference on Quantitative Infrared Thermography, 2-5 July 2008, Krakov, Poland.

Machin, G; Teixeira, R*; Lu, X*; Lowe, D (2015) Bilateral comparison between NPL and INMETRO using a high temperature fixed point of unknown temperature. Int. J. Thermophysics, 36 (2-3). pp. 327-335.

Machin, G; Tsai, B K* (2009) Temperature fundamentals. In: Experimental Methods in the Physical Sciences, Vol. 42 Radiometric temperature measurement. Elsevier, pp. 29-71. ISBN 9780123740212

Machin, G; Whittam, A; Ainarkar, S*; Allen, J*; Bevans, J*; Edmonds, M*; Kluwe, B*; Macdonald, A*; Petrova, N*; Plassmann, P*; Ring, F*; Rogers, L*; Simpson, R* (2017) A medical thermal imaging device for the prevention of diabetic foot ulceration. Physiol. Meas., 38 (3). pp. 420-430.

Machin, G; Wright, L; Lowe, D; Pearce, J (2008) Optimising the implementation of high temperature fixed-points through the use of thermal modelling. Int. J. Thermophysics, 29 (1). pp. 261-270.

Machin, G; Yamada, Y*; Lowe, D; Sasajima, N*; Sakuma, F*; Fan Kai*, (2001) A comparison of metal-carbon eutective blackbody cavities of rhenium, iridium, platinum and palladium between NPL and NMIJ. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Machin, G; del Campo, D*; Fellmuth, B*; Fischer, J*; Gavioso, R*; Lusher, C*; Merlone, A*; Mills, I*; Pitre, L*; de Podesta, M (2011) Meeting report: New kelvin dissemination workshop held at NPL on 27-28th Oct 2010. Metrologia, 48 (1). pp. 68-69.

Mackechnie, C; Simpson, R (2006) Traceable calibration for blood pressure and temperature monitoring. Nursing Standard, 21 (11). pp. 42-47.

Malik, Z; Hunt, J D*; Davies, H; Lee, P D*; Lowe, D; Quested, P N (2011) A solidification approach to correcting for impurity uncertainties in fixed points. Int. J. Thermophysics, 32 (7-8). pp. 1589-1601.

Mandal, R*; Coupland, J*; Leach, R K; Mansfield, D* (2014) Coherence scanning interferometry: measurement and correction of three-dimensional transfer and point-spread characteristics. Appl. Opt., 53 (8). pp. 1554-1563.

Mandal, R*; Palodhi, K*; Coupland, J*; Leach, R K; Mansfield, D* (2012) Application of linear systems theory to characterize coherence scanning interferometry. Proc. SPIE - Int. Soc. Opt. Eng., 3430. 84600T

Mandal, R*; Palodhi, K*; Coupland, J*; Leach, R K; Mansfields, D* (2011) Measurement of the point spread function in coherence scanning interferometry. In: Proceedings of the International Conference on Trends in Optics and Photonics II, 7-9 December 2011, Kolkata, India.

Mark, D F*; Stuart, F M*; de Podesta, M (2011) New high-precision measurements of the isotopic composition of atmospheric argon,. Geochim. Cosmochim. Acta, 75 (23). pp. 7494-7501.

Marson, S*; Attia, U M*; Lucchetta, G*; Wilson, A; Alcock, J R*; Allen, D M* (2011) Flatness optimization of micro-injection moulded parts: the case of a PMMA microfludic component. J. Micromechan. Microeng., 21 (11). 115024

Martin, J E; Thwaite, C* (1996) Absolute radiometry in space using a cryogenic mechanical cooler. Proc. SPIE - Int. Soc. Opt. Eng., 2814. pp. 18-29.

Martinez, J J*; Campbell, M A*; Warden, M S; Hughes, E B; Copner, N J*; Lewis, A J (2015) Duel-sweep frequency scanning interferometry using four wave mixing. IEEE Photonics Technol. Lett., 27 (7). pp. 733-736.

Martins, L L*; Ribeiro, A S*; Sousa, J A E*; Forbes, A B (2012) Measurement uncertainty of dew-point temperature in a two-pressure humidity generator. Int. J. Thermophysics, 33 (8-9). pp. 1568-1582.

Martinsons, C D; Levick, A P; Edwards, G J (2003) Measurement of the thermal diffusivity of solids with an improved accuracy. Int. J. Thermophysics, 24 (4). pp. 1171-1183.

Martinsons, C D*; Levick, A P; Edwards, G J (2003) Measurement of the thermal diffusivity of solids with an improved accuracy. Int. J. Thermophysics, 24 (4). pp. 1171-1183.

Martinsons, C*; Levick, A P; Edwards, G J (2001) Precise measurements of thermal diffusivity by photothermal radiometry for semi-infinite targets using accurately determined boundary conditions. Anal. Sci., 17 (Specia). S114-S117

Marwaha, N; Bevan, K (2016) Strategic planning for coordinate metrology. Measurement Good Practice Guide. 138

Matthews, C E; Pennecchi, F*; Eichstadt, S*; Malengo, A*; Esward, T J; Smith, I M; Elster, C*; Knott, A J; Arrhen, F*; Lakka, A* (2014) Mathematical modelling to support traceable dynamic calibration of pressure sensors. Metrologia, 51 (3). pp. 326-338.

Matus, M*; Piree, H*; Gavalyugov, V*; Tamakyarska, D*; Thalmann, R*; Balling, P*; Garnaes, J*; Hald, J*; Farid, N*; Prieto, E*; Lassila, A*; Salgado, J*; Lewis, A; Bandis, C*; Mudronja, V*; Banreti, E*; Balsamo, A*; Bergmans, R*; Karlsson, H*; Ramotowski, Z*; Saraiva, F*; Eusebio, L*; Duta, A*; Zelenika, S*; Bergstrand, S*; Fira, R*; Yandayan, T*; Sendogdu, D*; Akgoz, S A*; Ganioglu, O*; Haas, S*; Franke, P* (2016) Measurement of gauge blocks by interferometry. Metrologia, 53 (1A). 04003.

Maybank, L; Knott, A J (1998) Uncertainty of force measurement in build up procedures. In: IMEKO TC3, 1998, Osaka.

Maybank, L; Knott, A J; Elkington, D (1999) Guide to the uncertainty of force measurement. NPL Report. CMAM 24

McCarthy, M B; Brown, S B; Evenden, A; Robinson, A D (2011) NPL freeform artefact for verification of non-contact measuring systems. Proc. SPIE - Int. Soc. Opt. Eng., 7864. 78640K

McCarthy, M B; Nunn, J W; Rodger, G N (1997) NPL optical length scales in the range 300nm to 400nm. In: Proc. Landamap 97, 16 July 1997, Huddersfield.

McEvoy, H C (2007) The examination of base parameters for ITS-90 scale realisation in radiation thermometry. EUROMET.T-S1 (EUROMET Project 658) Main measurement report (final version). NPL Report. ENG 2

McEvoy, H C; Chattle, M V; Butler, J (1996) Comparison of temperature scale maintained on platinum resistance thermometers with the NPL radiance temperature scale. Metrologia, 33. pp. 353-362.

McEvoy, H C; Machin, G; Fox, N P; Theocharous, E; Hassan, I S* (1996) An ingaas radiation thermometer for temperature scale realisation. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

McEvoy, H C; Machin, G; Friedrich, R*; Hartmann, J*; Hollandt, J* (2003) Comparison of the new NPL primary standard Ag fixed-point blackbody source with the primary standard fixed-point of PTB. AIP Conf. Proc., 684 (2). pp. 909-914.

McEvoy, H C; Martin, M J*; Steiner, A*; Schreiber, E*; Girard, F*; Battuello, M*; Sadli, M*; Ridoux, P*; Gutschwager, B*; Hollandt, J*; Diril, A*; Pehlivan, O* (2014) EURAMET project to examine underlying parameters in radiance temperature scale realisation, 156 °C to 1000 °C. Int. J. Thermophysics, 35 (3). pp. 446-466.

McEvoy, H C; Raven, K M; Pokhodoun, A I*; Matveyev, M S* (1995) Anglo-Russian agreement in metrology: Theme 26 the international temperature scale of 1990 above 962°C. NPL-VNIIM intercomparison of tungsten ribbon lamps. NPL Report. QU 107

McEvoy, H C; Raven, K M; Pokhodoun, A I*; Matveyev, M S* (1996) NPL - VNIIM intercomparison of tungsten ribbon lamps. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

McEvoy, H C; Sadli, M*; Bourson, F*; Briaudeau, S*; Rougie, B* (2013) A comparison of the NPL and LNE-Cnam silver and copper fixed-point blackbody sources, and measurement of the silver/ copper temperature interval. Metrologia, 50 (6). pp. 559-571.

McEvoy, H C; Simpson, R; Machin, G (2004) New blackbody standard for the evaluation and calibration of tympanic ear thermometers at the NPL, UK. Proc. SPIE - Int. Soc. Opt. Eng., 5405 (1). pp. 54-60.

McKee, C*; Culshaw, B*; Leach, R (2017) Laser ultrasound measurement of diaphragm thickness, Young's modulus and Poisson's ratio in an MEMS device. IEEE J. Sel. Top. Quantum Electron., 23 (2). 2700108

McKee, C*; Culshaw, B*; Leach, R K (2012) Thickness measurement of silicon MEMS pressure sensor membrane using laser generated ultrasound. In: 12th euspen International Conference, 4-8 June 2012, Stockholm, Sweden.

McPolin, C P T*; Olivier, N*; Bouillard, J S*; O'Connor, D; Krasavin, A V*; Dickson, W*; Wurtz, G A*; Zayats, A V* (2017) Universal switching of plasmonic signals using optical resonator modes. Light-Science Applications, 6. e16237

Melzack, N*; Jones, E*; Peters, D M*; Hurley, J G*; Watkins, R E J*; Fok, S*; Sawyer, C*; Marchetaux, G*; Acreman, A; Winkler, R; Lowe, D; Theocharous, T; Montag, V; Gibbs, D; Pearce, A B*; Bishop, G*; Newman, E*; Keen, S*; Stokes, J*; Pearce, A*; Stamper, R*; Cantell-Hynes, A* (2017) Variable temperature blackbodies via variable conductance: thermal design, modelling and testing. Int. J. Thermophysics, 38 (2). p. 30.

Merlone, A*; Lopardo, G*; Antonsen, I*; Bell, S A; Benyon, R*; Boese, N*; del Campo, D*; Dobre, M*; Drnovsek, J*; Elkatmis, A*; Georgin, E*; Grudniewicz, E*; Heinonen, M*; Holstein-Rathiou, C*; Johansson, J*; Klason, P*; Knorova, R*; Melvad, C*; Merrison, J*; Migala, K*; de Podesta, M; Saathoff, H*; Smorgon, D*; Sparasci, F*; Strnad, R*; Szmyrka-Grzebyk, A*; Vuillermoz, E* (2013) A new challenge for meteorological measurements: the "MeteoMet" project - metrology for meteorology. AIP Conf. Proc., 1552. pp. 1030-1035.

Merlone, A*; Lopardo, G*; Sanna, F*; Bell, S A; Benyon, R*; Bergerud, R A*; Bertiglia, F*; Bojkovski, J*; Bose, N*; Brunet, M*; Cappella, A*; Coppa, G*; del Campo, D*; Dobre, M*; Drnovsek, J*; Ebert, V*; Emardson, R*; Fernicola, V*; Flakiewicz, K*; Gardiner, T; Garcia-Izquierdo, C*; Georgin, E*; Gilabert, A*; Grykalowska, A*; Grudniewicz, E*; Heinonen, M*; Holmsten, M*; Hudoklin, D*; Johansson, J*; Kajastie, H*; Kaykisizli, H*; Klason, P*; Knazovicka, L*; Lakka, A*; Kowal, A*; Muller, H*; Musacchio, C*; Nwaboh, J*; Pavlasek, P*; Piccato, A*; Pitre, L*; de Podesta, M; Rasmussen, M K*; Sairanen, H*; Smorgon, D*; Sparasci, F*; Strnad, R*; Szmyrka-Grzebyk, A*; Underwood, R (2015) The MeteoMet project - metrology for meteorology: challenges and results. Meteorological Applications, 22. pp. 820-829.

Meury, P-A*; Bentouati, D*; Berry, J J; Davidson, S; Plimmer, M*; Silvestri, Z*; Ojanen, M*; Hogstrom, R*; Fuchs, P*; Marti, K*; Zuda, J*; Kacmaz, S*; Green, R* (2015) Homogeneity and resistance of metal on metal coatings (EMRP SIB-05 Deliverable 1.2.2). NPL Report. ENG 64

Meury, P-A*; Bentouati, D*; Berry, J J; Davidson, S; Plimmer, M*; Silvestri, Z*; Ojanen, M*; Hogstrom, R*; Fuchs, P*; Marti, K*; Zuda, J*; Kacmaz, S*; Green, R* (2015) Summary report of properties of materials for potential use as mass transfer standards. NPL Report. ENG 58

Meyer, P*; Claverley, J D; Kaiser, K*; Mohr, J*; Leach, R K (2011) Comparison of dimensional measurements of microparts made using deep x-ray lithography (LIGA): first results. In: 11th International Conference of the European Society for Prescision Engineering and Nanotechnology (euspen 2011), 23-27 May 2011, Lake Como, Italy.

Meyer, P*; Claverley, J D; Leach, R K (2012) Quality control for deep x-ray lithography (LIGA): a preliminary metrology study. Microsyst. Technol., 18 (4). pp. 415-421.

Miao, P; Bell, S A; Rujan, M*; Mugurel, G*; McIlroy, C (2014) Report on literature review of recent development in loss on drying method for moisture determination. NPL Report. ENG 52

Mohandas, P*; Head, D I; Rusby, R L (1996) A powdered CMN thermometer for high accuracy measurements in the range 0.01 to 1K. Czech. J. Phys., LT21 Proc.,, 46 (Supple). pp. 2867-2868.

Moldover, M R*; Gavioso, R M*; Mehl, J B*; Pitre, L*; de Podesta, M; Zhang, J T* (2014) Acoustic gas thermometry. Metrologia, 51 (1). R1-R19

Morgan, L E*; Postma, O*; Kuiper, K F*; Mark, D F*; van der Plas, W*; Davidson, S; Perkin, M; Villa, I M*; Wijbrans, J R* (2011) A metrological approach to measuring (40)Ar* concentrations in K-Ar and (40)Ar/(39Ar mineral standards. Geochem. Geophys. Geosyst., 12. A0AA20

Morice, R*; Edler, F*; Pearce, J; Machin, G; Fischer, J*; Filtz, J R* (2008) High-temperature fixed points facilities for improved thermocouple calibrations - EUROMET project 857. Int. J. Thermophysics, 29 (1). pp. 231-240.

Moschetti, G; Forbes, A B; Leach, R K*; Jiang, X*; O'Connor, D (2016) Phase and fringe order determination in wavelength scanning interferometry. Opt. Express, 24 (8). pp. 8997-9012.

Moschetti, G; Forbes, A B; Leach, R K*; Jiang, X*; O'Connor, D (2016) Quadrature wavelength scanning interferometry. Appl. Opt., 55 (20). pp. 5332-5340.

Muelaner, J*; Wadsworth, W*; Azini, M*; Mullineux, G*; Hughes, B; Reichold, A* (2017) Absolute multilateration between spheres. Meas. Sci. Technol., 28 (4). 045005

Muralikrishnan, B*; Lee, V*; Blackburn, C*; Sawyer, D*; Phillips, S*; Ren, W*; Hughes, E B (2013) Assessing ranging errors as a function of azimuth in laser trackers and tracers. Meas. Sci. Technol., 24 (6). 065201

N

Nasr, K M; Hughes, B; Forbes, A B; Lewis, A (2014) Determination of laser tracker angle encoder errors. In: UNSPECIFIED.

Nimishakavi, L P; Giusca, C L; Leach, R K; Blanchon, B* (2012) Measurement and characterization of the areal surface texture of crankshafts for optimizing the process variables during manufacture. In: International Conference on Surface Metrology (ICSM'2012), 21-23 March 2012, Annecy, France.

Nimishakavi, L P; Giusca, C L; Leach, R K; Blanchon, B* (2012) The use of areal surface texture parameters for determining machining parameters in precision grinding. NPL Report. ENG 33

Nunn, J (2008) Thermographic evaluation of thermal barrier coatings on contoured substrates. NPL Report. MN 4

Nunn, J W; Banks, J P; Chunnilall, C J; Saunders, S R J (2004) Factors affecting fluorescence of thermally grown oxide in the presence of a thermal barrier coating. NPL Report. DEPC-MPE 006

O

O'Connor, D; Henning, A J; Sherlock, B; Leach, R K; Coupland, J*; Giusca, C L (2015) Model-based defect detection on structured surfaces having optically unresolved features. Appl. Opt., 54 (30). pp. 8872-8877.

Ongrai, O; Pearce, J V; Machin, G; Sweeney, S J (2011) A miniature high-temperature fixed point for self-validating type C thermocouples. Meas. Sci. Technol., 22 (10). 105103

Ongrai, O; Pearce, J V; Machin, G; Sweeney, S J* (2010) Comparative study of Pt/Pd and Pt-Rh/Pt thermocouples. Int. J. Thermophysics, 31 (8-9). pp. 1506-1516.

Ongrai, O; Pearce, J V; Machin, G; Sweeney, S J* (2011) Miniature Co-C eutectic fixed-point cells for self-validating thermocouples. Meas. Sci. Technol., 22 (1). 015104

Ongrai, O*; Elliott, C J (2017) Establishment of the Co-C eutectic fixed-point cell for thermocouple calibration at NIMT. Int. J. Thermophysics, 38 (8). p. 127.

Ongrai, O*; Pearce, J V; Machin, G; Norranim, U* (2015) Multi-mini-eutectic fixed-point cell for type C thermocouples self-calibration. Int. J. Thermophysics, 36 (2-3). pp. 423-432.

Ongrai, O*; Pearce, J V; Machin, G; Sweeney, S J* (2013) Self-calibration of a W/Re thermocouple using a miniature Ru-C (1954degC) eutectic cell. AIP Conf. Proc., 1552. pp. 504-509.

P

Pablo, C*; Bloembergen, P*; Yamada, Y*; Villamanan, M A*; Machin, G (2008) On the uncertainty in the temperature drop across the backwall of high temperature fixed points. Acta Metrologica Sinica, 29 (4A). pp. 253-260.

Palodhi, K*; Coupland, J M*; Leach, R K (2011) Determination of the point spread function of a coherence scanning interferometer. In: 13th International Conference on Metrology and Properties of Engineering Surfaces., 12-15 April 2011, Twickenham Stadium, UK.

Palodhi, K*; Coupland, J M*; Leach, R K (2011) Measurement of complex refractive index using microellipsometry and its relevance to surface measurement using coherence scanning interferometry. In: 13th International Conference on Metrology and Properties of Engineering Surfaces., 12-15 April 2011, Twickenham Stadium, UK.

Palodhi, K*; Coupland, J*; Leach, R K (2011) Absolute surface topography measurement of composite structures using coherence scanning interferometry. In: 11th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2011), 23-27 May 2011, Lake Como, Italy.

Parker, A (2000) Optical fibre coating thickness and geometry - report on a feasibility study of traceability issues associated with different measurement techniques. NPL Report. CBTLM 5

Pavese, F*; Fellmuth, B*; Hill, K D*; Head, D I; Hermier, Y*; Lipinski, L*; Nakano, T*; Peruzzi, A*; Sakurai, H*; Szmyrka-Grzebyk, A*; Steele, A G*; Steur, P P M*; Tamura, O*; Tew, W L*; Valkiers, S*; Wolber, L* (2008) Progress towards the determination of the relationship of triple-point temperature versus isotopic composition of neon. Int. J. Thermophysics, 29 (1). pp. 57-66.

Pavese, F*; Ferri, D*; Peroni, I*; Pugliese, A*; Steur, P P A*; Fellmuth, B*; Head, D I; Lipinski, L*; Peruzzi, A*; Grzebyk, A S*; Wolber, L* (2003) Cryogenic temperature sealed fixed points: a new-generation of nuclear cells at IMGC. AIP Conf. Proc., 684 (1). pp. 179-178.

Pavese, F*; de Groot, M*; Fellmuth, B*; Head, D I; Hermier, Y*; Szmyrka-Grazebyk, A*; Zanin, L* (2001) The project 'MULTICELLS' for the development of new temperature standards in the cryogenic range down to 2.18 K by means of sealed cells. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Pavese, F*; fellmuth, B*; Head, D I; Hermier, Y*; Peruzzi, A*; Grzebyk, A S*; Zanin, L* (2003) MULTICELLS: a European project on cryogenic temperature fixed points in sealed cells. AIP Conf. Proc., 684 (1). pp. 161-166.

Pavlasek, P*; Elliott, C J; Pearce, J V; Duris, S*; Palencar, R*; Koval, M*; Machin, G (2015) Hysteresis effects and strain-induced homogeneity effects in base metal thermocouples. Int. J. Thermophysics, 36 (2-3). pp. 467-481.

Pearce, J (2008) Automatic characterization of thermoelectric homogeneity. Acta Metrologica Sinica, 29 (5A). pp. 313-319.

Pearce, J (2016) EMPRESS: A pan-European project to enhance manufacturing process efficiency through improved temperature control. Meas. Control, 49 (8). pp. 252-255.

Pearce, J (2017) Extra points for thermometry. Nature Physics, 13 (1). p. 104.

Pearce, J (2007) Quantitative determination of the uncertainty arising from the inhomogeneity of thermocouples. Meas. Sci. Technol., 18 (11). pp. 3489-3495.

Pearce, J V (2014) Distribution coefficients of impurities in metals. Int. J. Thermophysics, 35 (3-4). pp. 628-635.

Pearce, J V (2016) Optimising platinum-rhodium thermocouple wire composition to minimise composition change due to evaporation of oxides determining the optical composition as a function of temperature. Johnson Matthey Technol. Rev., 60 (4). pp. 238-242.

Pearce, J V (2016) Survey of key parameters of impurities in aluminium: diffusion coefficients, solubility, and liquidus slopes. Int. J. Thermophysics, 37 (12). p. 123.

Pearce, J V (2013) A coupled heat and mass transfer model of pure metal freezing using comsol multiphysics. AIP Conf. Proc., 1552. pp. 289-294.

Pearce, J V (2007) A simple device for substantially improving metal-carbon eutectic fixed point performance by reducing temperature gradients. Metrologia, 44. L1-L3.

Pearce, J V; Crabb, J; Elliott, C J; Rusby, R L (2016) Analysis of SPRT calibration data obtained at NPL since the introduction of the ITS-90. Int. J. Thermophysics, 37 (12). p. 124.

Pearce, J V; Edler, F*; Elliott, C J; Failleau, G*; Morice, R*; Ogura, H* (2011) Investigation of Pd-C cells to improve thermocouple calibration. Metrologia, 48 (5). pp. 375-381.

Pearce, J V; Edler, F*; Elliott, C J; Rosso, L*; Sutton, G; Andreu, A*; Machin, G (2017) EMPRESS: a European project to enhance process control through improved temperature measurement. Int. J. Thermophysics, 38 (8). p. 118.

Pearce, J V; Elliott, C J; Deeks, W*; Underwood, M* (2013) Thermal testing of undersea oil and gas pipeline insulation. AIP Conf. Proc., 1552. pp. 964-969.

Pearce, J V; Elliott, C J; Greenen, A; del Campo, D*; Martin, M J*; Garcia Izquierdo, C*; Pavlasek, P*; Nemecek, P*; Failleau, G*; Deuze, T*; Sadli, M*; Machin, G (2015) A pan-European investigation of the Pt-40%Rh/Pt-20%Rh (Land-Jewell) thermocouple reference function. Meas. Sci. Technol., 26 (1). 015101

Pearce, J V; Elliott, C J; Lowe, D H; Failleau, G*; Deuze, T*; Bourson, F*; Sadli, M*; Machin, G (2014) Performance of Pt-C, Cr7C3-Cr3C2, and Ru-C fixed points for thermocouple calibrations above 1600 °C. Int. J. Thermophysics, 35 (3). pp. 547-559.

Pearce, J V; Elliott, C J; Machin, G; Ongrai, O (2013) Self-validating type C thermocouples to 2300 °C using high temperature fixed points. AIP Conf. Proc., 1552. pp. 595-600.

Pearce, J V; Gisby, J A; Steur, P P M* (2016) Liquidus slopes of impurities in ITS-90 fixed points from the mercury point to the copper point in the low concentration limit. Metrologia, 53 (4). pp. 1101-1104.

Pearce, J V; Gray, J; Veltcheva, R I (2016) Characterisation of a selection of AC and DC resistance bridges for standard platinum resistance thermometry. Int. J. Thermophysics, 37 (11). p. 109.

Pearce, J V; Greenen, A; Bramley, P*; Cruickshank, D* (2015) Towards a practical Johnson noise thermometer for long-term measurements in harsh environments. In: 4th International Conference on Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 20-24 April 2015, Lisbon, Portugal.

Pearce, J V; Greenen, A D; Smith, A; Elliott, C J (2017) Relating composition and thermelectric stability of Pt-Rh alloy thermocouples. Int. J. Thermophysics, 38 (2). p. 26.

Pearce, J V; Harris, P M; Greenwood, J C (2010) Evaluating uncertainties in interpolations between calibration data for thermocouples. Int. J. Thermophysics, 31 (8-9). pp. 1517-1526.

Pearce, J V; Lowe, D H; Head, D I; Machin, G (2008) Optimising contact thermometry high temperature fixed point cells (>1100 ºC) using finite element analysis. Int. J. Thermophysics, 29 (1). pp. 250-260.

Pearce, J V; Machin, G (2008) A robust Pd-C fixed-point for calibration of thermocouples. Acta Metrologica Sinica, 29 (5A). pp. 224-228.

Pearce, J V; Machin, G; Ford, T*; Wardle, S* (2008) Long term drift characterisation of noble metal thermocouples using high temperature fixed points. Acta Metrologica Sinica, 29 (5A). pp. 86-89.

Pearce, J V; Machin, G; Ford, T*; Wardle, S* (2008) Optimising heat treatment of gas turbine blades with a Co-C fixed point for improved in-service thermocouples. Int. J. Thermophysics, 29 (1). pp. 222-230.

Pearce, J V; Montag, V; Lowe. D H,, ; Dong, W* (2011) Melting temperature of high temperature fixed points for thermocouple calibrations. Int. J. Thermophysics, 32 (1-2). pp. 463-470.

Pearce, J V; Ogura, H*; Izuchi, M*; Machin, G (2009) Evaluation of the Pd-C eutectic fixed point and the Pt/Pd thermocouple. Metrologia, 46 (5). pp. 473-479.

Pearce, J V; Ongrai, O; Machin, G; Sweeney, S J* (2010) Self-validating thermocouples based on high temperature fixed points. Metrologia, 47 (1). L1-L3.

Pearce, J V; Rusby, R L; Harris, P M; Wright, L (2013) The optimisation of self-heating corrections in resistance thermometry. Metrologia, 50 (4). pp. 345-353.

Pearce, J V; Sun, J P*; Zhang, J T*; Deng, X L* (2017) Impurity correction techniques applied to existing doping measurements of impurities in zinc. Int. J. Thermophysics, 38 (1). p. 4.

Pearce, J V; Veltcheva, R I; Large, M J (2013) Impurity and thermal modelling of SPRT fixed-points. AIP Conf. Proc., 1552. pp. 283-288.

Pearce, J V; Veltcheva, R I; Lowe, D H; Malik, Z; Hunt, J D* (2012) Optimisation of SPRT measurements of freezing in a zinc fixed point cell. Metrologia, 49 (3). pp. 359-367.

Pearce, J V; de Podesta, M; Elliott, C; Machin, G (2011) Improving temperature sensing in new reactors. Nucl. Eng. Int., 56 (688). pp. 18-20.

Pearce, J V; de Podesta, M; Elliott, C J; Machin, G (2012) Improving temperature sensing in nuclear environments. Meas. Control, 45 (2). pp. 60-62.

Peattie, G; Davidson, S (1998) Design and assessment of an automatic 50 kg weight exchanger. NPL Report. CMAM 23

Peattie, G; Davidson, S (1998) Modifications to the NPL bullion balance. NPL Report. CMAM 21

Peggs, G N (2003) Virtual technologies for advanced manufacturing and metrology. Int. J. Comput. Integr. Manfu., 16 (7-8). pp. 485-490.

Peggs, G N; Lewis, A; Leach, R K (2003) Measuring in three dimensions at the mesoscopic level. In: Proceedings of the ASPE Winter Topical Meeting - Machines and Processes for Micro-scale and Meso-scale Fabrication, Metrology and Assembly., January 2003, Florida, USA.

Peggs, G N; Lewis, A J; Leach, R K (2004) Measuring the metrology gap: three dimensional metrology at the mesoscopic level. J. Manuf. Process., 6 (1). pp. 117-124.

Peggs, G N; Lewis, A J; Oldfield, S (1999) Design for a compact high accuracy CMM. Ann. CIRP, 48 (1). pp. 417-420.

Peggs, G N*; Maropoulos, P G*; Hughes, E B; Forbes, A B; Robson, S*; Ziebart, M*; Muralikrishnan, B* (2009) Recent developments in large scale metrology. Proc. Inst. Mech. Eng. B, J. Eng. Manuf., 223 (6). pp. 571-595.

Peng, L*; Yuzhul, M*; Chaosheng, H*; Pavese, F*; Peroni, I*; Head, D I; Rusby, R L (2003) Realization of the lambda transition temperature of 4He using sealed cells. AIP Conf. Proc., 684 (1). pp. 191-195.

Perkin, M (2008) Report on EUROMET key comparison of 1 kg standards in stainless steel (EUROMET.M.M-K4). NPL Report. ENG 4

Perkin, M (2009) Report on EUROMET key comparison of pressure measurements standards in the range 80 kPa to 7 MPa (EUROMET.M.P-K3.b). NPL Report. ENG 14

Perkin, M (2000) Report on a comparison of pressure standards in the range 10 MPa to 100 MPa. NPL Report. CMAM 54

Perkin, M; Davidson, S (2016) Guide to the storage of primary mass standards. Measurement Good Practice Guide. 139

Perkin, M; Davidson, S (2016) Guide to weighing in vacuum. Measurement Good Practice Guide. 140

Perkin, M P (2009) Report on EUROMET key comparison of multiples and submultiples of the kilogram (EUROMET.M.M-K2). NPL Report. ENG 13

Perkin, M P (1997) A comparison of low differential pressure standards in the range 3 Pa to 1000 Pa. NPL Report. CMAM 3

Perkin, M P; Picard, A*; Lecolinet, M*; Fen, K*; Sardi, M*; Miiler, A*; Agarwal, A*; Jescheck, M*; Wüthrich, C* (2008) Final report, CCM key comparison CCM.P-K2, pressure (10 kPa to 120 kPa) absolute mode. Metrologia, 45 (Tech, ). 07002.

Perkins, M P (2010) Report on EURAMET key comparison of multiples and submultiples of the kilogram (EURAMET.M.M-K2.1). NPL Report. ENG 17

Petchpong, P*; Head, D I (2007) Argon pressure is maintained in an Aluminium thermometric fixed-point cell. Metrologia, 44 (6). L73-L75

Petchpong, P*; Head, D I; Au, J Y H* (2008) Influence of a trace impurity on tin fixed point plateaus. In: SICE 2008, 20-22 Aug 2008, Japan.

Petley, B W (1994) Clocking the fundamental physical constants. Phys. World, 7 (1). pp. 23-24.

Petley, B W (2001) The fundamental constants and metrology. Proceedings of the International School of Physics "Enrico Fermi", 146. pp. 121-145.

Petley, B W (2001) The fundamental constants and physics. Proceedinds of the International School of Physics "Enrico Fermi", 146. pp. 93-120.

Petley, B W (1997) The fundamental constants of physics. In: The Dictionary of Physics. UNSPECIFIED.

Petley, B W (1996) The mole and the unified atomic mass unit. Metrologia, 33 (3). pp. 261-264.

Petrova, N L*; MacDonald, A*; Ainarkar, S*; Plassmann, P*; Ring, F*; Sinpson, R*; Bevans, J*; Allen, J*; Machin, G; Edmonds, M E* (2016) Infrared thermometry reveals no differences of the skin temperature at the plantar, dorsal, medial and lateral sites between the right foot and left foot in healthy volunteers. Diabetic Medicine, 33. p. 53.

Petrova, N L*; Tang, W*; MacDonald, A*; Lomas, C*; Ainarkar, S*; Bevans, J*; Allen, J*; Plassmann, P*; Machin, G; Edmonds, M E* (2017) The use of thermal imaging in the follow-up of healed diabetic foot ulcers. Diabetic Med., 34. p. 135.

Petzing, J*; Coupland, J*; Leach, R K (2010) The measurement of rough surface topography using coherence scanning interferometry. Measurement Good Practice Guide. 116

Picard, A*; Bignell, N*; Borys, M*; Downes, S; Mizushima, S* (2009) Mass comparison of the 1 kg silicon sphere AVO#3 traceable to the International Prototype K. Metrologia, 46 (1). pp. 1-10.

Picard, A*; Bignell, N*; Borys, M*; Downes, S; Mizushima, S* (2009) Mass comparison of the 1 kg silicon sphere AVO#3 traceable to the international prototype K. Metrologia, 46 (1). pp. 1-10.

Pisani, M*; Yacoot, A; Balling, P*; Bancone, N*; Birlikseven, C*; Celik, M*; Flügge, J*; Hamid, R*; Köchert, P*; Kren, P*; Kuetgens, U*; Lassila, A*; Picotto, G B*; Sahin, E*; Seppa, J*; Tedaldi, M; Weichert, C* (2012) Comparison of the performance of the next generation of optical interferometers. Metrologia, 49 (4). pp. 455-467.

Pratt, B*; Robinson, A (2008) A comparison between supported and unsupported beams for use in static torque calibrations. Measurement, 41 (10). pp. 1162-1168.

Pratt, B*; Robinson, A D (2006) A comparison between supported and unsupported beams for use in static torque calibrations. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Pusnik, I*; Clausen, S*; Favreau, J O*; Gutschwager, B*; Dogan, A K*; Diril, A*; Guven, O P*; McEvoy, H C; Hoem, S S*; Steiner, A*; van der Ham, E* (2011) Comparison of blackbodies for calibration of infrared ear thermometers. Int. J. Thermophysics, 32 (1-2). pp. 127-138.

Q

Quabis, S*; Schulz, M*; Ehret, G*; Asar, M*; Balling, P*; Kren, P*; Bergmans, R H*; Kung, A*; Lassila, A*; Putland, D; Williams, D; Piree, H*; Prieto, E*; Perez, M*; Svedova, L*; Ramotowski, Z*; Vannoni, M*; Hungwe, F*; Kang, Y* (2017) Intercomparison of flatness measurement of an optical flat at apertures of up to 150 mm in diameter. Metrologia, 54 (1). pp. 85-93.

Quinn, T J*; Martin. J E, (1996) Total radiation measurements of thermodynamic temperature. Metrologia, 33. pp. 375-381.

R

Raine, K; Parker, A (1998) Measurement of two dimensional axial stress profiles of optical fibres with high spatial resolution. NIST Special Publication, 930. pp. 57-60.

Rajaguru, P*; Stoyanov, S*; Tang, Y K*; Bailey, C*; Claverley, J; Leach, R K; Topham, D* (2010) Numerical modelling methodology for design of miniaturised integrated products - an application to 3D CMM micro-probe development. In: 11th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiements in Microelectronics and Microsystems (EuroSimE 2010)., 26-28 April 2010, Bordeaux, France.

Raymond, N M (1999) Operation of the Mass and Weighing Club April 1998 to September 1999. NPL Report. CMAM 43

Raymond, N M; Nielsen, L* (1997) A Bi-Lateral Comparison of a 0.5 gram to 0.001 gram Weight Set. NPL Report. CMAM 6

Redgrave, F J; Music, V (1999) Metrological relationaships between primary vacuum standards. NPL Report. CMAM 46

Redgrove, J (1994) Improved method for measurement of spectral emittance to high temperatures. High Temp. Chem. Processes, 3. 187 - 193

Redgrove, J (1994) Spectral emittance measurements with the new NPL high temperature emissometer. In: Proc. 6th Int. Symp. on materials in a space environment, 19 - 23 September 1994, ESTE, Noordwijk, The Netherlands.

Redgrove, J; Battuello, M* (1995) An intercomparison of normal spectral emissivity measurements between NPL (UK), and IMGC (Italy). High Temp.-High Press., 27-8. pp. 135-146.

Redgrove, J; Warsop, G* (1995) Measurement of the spectral emittance of tantalum with the NPL high temperature emissometer. High Temp.-High Press., 27-8. pp. 245-251.

Reilly, S P; Leach, R K (2006) Critical review of seismic vibration isolation techniques. NPL Report. DEPC-EM 007

Reilly, S P; Leach, R K; Cuenat, A; Awan, S A; Lowe, M (2006) Overview of MEMS sensors and the metrology requirements for their manufacture. NMS Programme for Engineering Measurement 2005-2008. NPL Report. DEPC-EM 008

Reis Machado, R*; Kasper, P*; Weiglhofer, E*; Kumme, R*; Navrozidis, G*; Vamossy, C*; Verbeek, J*; Wozniak, M*; Spohr, I*; Sandu, I*; Wuthrich, C*; Knott, A J (2014) Final report on force key comparison EUROMET.M.F-K2: 50 kN and 100 kN (EURAMET Project No 518). Metrologia, 51 (1A). 07007.

Reis Machado, R*; Kasper, P*; Weiglhofer, E*; Kumme, R*; Navrozidis, G*; Vamossy, C*; Verbeek, J*; Wozniak, M*; Spohr, I*; Sandu, I*; Wuthrich, C*; Knott, A J (2014) Final report on force key comparison EUROMET.M.F-K2: 50 kN and 100 kN (EURAMET Project No 518). Metrologia, 51 (1A). 07007.

Renaot, E*; Hermier, Y*; Valin, M H*; Bonnier, G*; Adunka, F*; Van Der Linden, A*; Dobre, M*; Smid, M*; Bronnum, A*; Weckstrom, T*; Tegeler, E*; Noatsch, U*; Anagnostou, M*; Turzo-Andres, E*; Nemeth, S*; White, M*; Marcarino, P*; Steur, P*; Pauzha, A*; Augevicius, V*; de Groot, M*; Nielsen, J*; Helgesen, F*; Roszkowski, W*; Grundniewicz, E*; Kuna, R*; Filipe, E*; Lobo, I*; Gaita, S*; Chimenti, V*; Ivarsson, J*; Duris, S*; Ranostaj, J*; Bojkovski, J*; Steiner, A*; Ugur, S*; Gray, J; Bruce, S*; Rusby, R; Head, D I (2008) Intercomparison of the realizations of the ITS-90 from 83.8058 k to 692.677 k among European NMIs. Int. J. Thermophysics, 29 (3). pp. 991-1000.

Rerucha, S*; Yacoot, A; Pham, T M*; Cizek, M*; Hucl, V*; Lazar, J*; Cip, O* (2017) Laser source for dimensional metrology: investigation of an iodine stabilized system based on narrow linewidth 633 nm DBR diode. Meas. Sci. Technol., 28 (4). 045204

Ricolfi, T*; Battuelle, M*; Girard, F*; Machin, G; McEvoy, H C; Ugur, S*; Diril, A* (2002) Radiation temperature scales between the indium and silver points realized at IMGC, NPL and UME using a fixed-point calibration technique. Meas. Sci. Technol., 13 (12). pp. 2090-3.

Ripple, D C*; Davis, R*; Fellmuth, B*; Fischer, J*; Machin, G; Quinn, T*; Steur, P*; Tamura, O*; White, D R* (2010) The roles of the mise en pratique for the definition of the kelvin. Int. J. Thermophysics, 31 (8-9). pp. 1795-1808.

Robinson, A (2008) Guide to the calibration and testing of torque transducers. Measurement Good Practice Guide. 107

Robinson, A (2008) UK torque intercomparison - 2007. NPL Report. ENG 3

Robinson, A (2007) The design, development and commissioning of a 2 kN.m torque standard machine. CalLab Mag., 14 (1). pp. 31-25.

Robinson, A D; Leach, R K (2008) Overview of tomography techniques to measure wafer thickness in MEMS structures. NPL Report. ENG 8

Robinson, G M (1996) Second NPL analysis of the distortion of pressure balances as part of EUROMET project 256. NPL Report. MOT 6

Robinson, I A (2012) Alignment of the NPL Mark II Watt balance. Meas. Sci. Technol., 23 (12). 124012

Robinson, I A (2013) Planck, Avogadro and measuring mass using fundamental constants. Annalen der Physik, 525 (8-9). A135-A137

Robinson, I A (2008) Progress towards the redefinition of the kilogram: measurements of Planck's constant using watt balances. In: CPEM 2008 - Conference on Precision Electromagnetic Measurements Digest, 8-13 June 2008, Colorado, USA.

Robinson, I A (2016) Simplified fundamental force and mass measurements. Metrologia, 53 (4). pp. 1054-1060.

Robinson, I A (2012) Toward the redefinition of the kilogram: a measurement of the Planck constant using the NPL Mark II watt balance. Metrologia, 49 (1). pp. 113-156.

Robinson, I A (2009) Towards a final result from the NPL Mk II watt balance. IEEE Trans. Instrum. Meas., 58 (4). pp. 936-941.

Robinson, I A (2016) Towards the next generation NPL watt balance. In: 2016 Conference on Precision Electromagnetic Measurements (CPEM), 10-15 July 2016, Ottawa, Canada.

Robinson, I A (2009) Towards the redefinition of the kilogram: measurements of Planck's constant using watt balances. IEEE Trans. Instrum. Meas., 58 (4). pp. 942-948.

Robinson, I A (2014) Watt and joule balances. Foreword. Metrologia, 51 (2). S1-S3.

Robinson, I A (2012) A simultaneous moving and weighing technique for a watt balance at room temperature,. Metrologia, 49 (1). pp. 108-112.

Robinson, I A; Georgeakopoulos, D* (2012) Electrical Quantum Standards and their role in the SI. Meas. Sci. Technol., 23 (12). 120301

Robinson, I A; Kibble, B P (2000) Further progress in relating the kilogram to h with the NPL Watt balance. In: Conference on Precision Electromagnetic Measurements (CPEM) 2000, 14-19 May 2000, Sydney, Australia.

Robinson, I A; Kibble, B P (2006) The NPL Watt Balance: modifications and new measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Kibble, B P (2006) The NPL Watt Balance: modifications and new measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Kibble, B P (2008) Towards a final result from the NPL Mark II watt balance. In: CPEM 2008 - Conference on Precision Electromagnetic Measurements Digest, 8-13 June 2008, Colorado, USA.

Robinson, I A; Kibble, B P (2008) An initial measurement of Planck's constant using the NPL Mark II watt balance. Metrologia, 44 (6). pp. 427-440.

Robinson, I A; Kibble, B P* (2014) Prototyping a new generation of watt balances. In: 29th Conference on Precision Electromagnetic Measurements (CPEM 2014), 24-29 August 2014, Rio de Janeiro, Brazil.

Robinson, I A; Lovelock, P (2006) The design of the third generation NPL Watt Balance. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Lovelock, P (2006) The design of the third generation NPL Watt Balance. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Schlamminger, S* (2016) The watt or Kibble balance: a technique for implementing the new SI definition of the unit of mass. Metrologia, 53 (5). A46-A74

Rodger, G N; Flack, D R; McCarthy, M B (2007) A review of industrial capabilities to measure free-form surfaces. NPL Report. DEPC-EM 014

Rusby, R; De Podesta, M; Williams, J M (2005) Review of methods for a redetermination of the Boltzmann constant. NPL Report. DEPC-TH 006

Rusby, R L (2016) Introduction to temperature measurement. Measurement Good Practice Guide. 125

Rusby, R L (1994) Traceable temperatures, by J V Nicholas and D R White: book review. Meas. Control,, 27 (5). p. 167.

Rusby, R L (2010) The discontinuity in the first derivative of the ITS-90 at the triple point of water. Int. J. Thermophysics, 31 (8-9). pp. 1567-1572.

Rusby, R L; Cousins, D; Head, D I; Mohandas, P; Godfrin, H*; Bunkov, Y M*; Bäuerle, C*; Harakaly, R*; Collin, E*; Triqueneaux, S*; Lusher, C*; Li, J*; Saunders, J*; Cowen, B*; Nyéki, J*; Digby, M*; Pekola, J*; Gloos, K*; Hernandez, P*; de Groot, M*; Peruzzi, A*; Jochemsen, R*; Chinchure, A*; Bosch, W*; Mathu, F*; Flokstra, J*; Veldhuis, D*; Hermier, Y*; Pitre, L*; Vergé, A*; Benhalima, F*; Fellmuth, B*; Engert, J* (2001) Dissemination of the ultra-low temperature scale, PLTS-2000. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Rusby, R L; Fellmuth, B*; Engert, J*; Fogle, W E*; Adams, E D*; Pitre, L*; Durieux, M* (2007) Realization of the 3He melting-pressure scale, PLTS-2000. J. Low Temp. Phys., 149 (3-4). pp. 156-175.

Rusby, R L; Hudson, R P*; Durieux, M* (1994) Revised values for (t90 - t68) from 630ºC to 1064ºC. Metrologia, 31. 149 - 153

Rusby, R L; Hudson, R P*; Durieux, M*; Grohmann, K*; Jung, H-J*; Steur, P P M*; Nicholas, J V* (1996) Status of thermodynamic thermometry. Rev. Gen. Therm., 35. pp. 338-343.

Rusby, R L; Kempson, M* (1996) Cryogenic temperature measurement. Rev. Gen. Therm., 35. pp. 338-343.

Rusby, R L; Machin, D (2017) Hysteresis and instability in some IPRT sensors within temperature ranges between -196 °C and 150 °C. Int. J. Thermophysics, 38 (8). p. 117.

Rusby, R L; Sutton, G J M; Stanger, L R; Veltcheva, R I (2014) The method of instantaneous comparisons applied to the calibration of SPRTs in liquid nitrogen and liquid argon. Int. J. Thermophysics, 35 (3). pp. 657-667.

Rusby, R L; Tew, W L* (2013) Characteristics of rhodium-iron resistance thermometers and interpolation properties from 0.65 K to 24.5561 K. AIP Conf. Proc., 1552. pp. 409-413.

S

Sadli, M*; Bloembergen, P*; Khlevnoy, B*; Wang, T*; Yamada, Y*; Machin, G (2011) An international study of the long-term stability of metal-carbon eutectic cells. Int. J. Thermophysics, 32 (7-8). pp. 1786-1799.

Sadli, M*; Bourson, F*; Diril, A*; Journeau, C*; Lowe, D; Parga, C* (2014) Construction and in-situ characterisation of high-temperature fixed point cells devoted to industrial applications. EPJ Web of Conferences, 77. 00018.

Sadli, M*; Machin, G; Anhalt, K*; Bourson, F*; Briaudeau, S*; del Campo, D*; Diril, A*; Kozlova, O*; Lowe, D H; Amor, J M M*; Martin, M J*; McEvoy, H C; Ojanen-Saloranta, M*; Pehlivan, O*; Rougie, B*; Salim, S G R* (2016) Dissemination of thermodynamic temperature above the freezing point of silver. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150043

Sadli, M*; Machin, G; Lowe, D; Hartmann, J*; Morice, R* (2001) Realisation and comparison of metal-carbon eutectic points for radiation thermometry applications and W-Re thermocouple calibration. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Sadli, M*; Yamada, Y*; Wang, T*; Yoon, H*; Bloembergen, P*; Machin, G (2008) Stability and robustness tests on Co-C, Pt-C and Re-C cells: the first results. Acta Metrologica Sinica, 29 (5A). pp. 59-64.

Sadli, M*; de Podesta, M; del Campo, D*; Deuze, T*; Edwards, G J; Elliott, C J; Failleau, G*; Fourrez, S*; Garcia Izquierdo, C*; Laurie, M*; Mokdad, S A*; Pearce, J V; Sutton, G J M (2013) New temperature references and sensors for the next generation of nuclear power plants. In: 3rd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications (ANIMMA)., 23-27 June 2013, Marseille, France..

Sadli, M*; delCampo, D*; de Podesta, M; Deuze, T*; Failleau, G*; Elliott, C J; Fourrez, S*; Garcia, C*; Pearce, J V (2013) MetroFission: new high-temperature references and sensors for the nuclear industry. AIP Conf. Proc., 1552. pp. 1003-1008.

Sakuma, F*; Sakate, H*; Carol Johnson, B*; Gibson, C*; Machin, G; Rocolfi, T*; Battuello, M*; Fischer, J*; Jung, H-J* (1996) International comparison of temperature scales among five metrological laboratories using a transfer standard radiation thermometer. Metrologia, 33. pp. 241-248.

Sakuma, F*; Sakate, H*; Johnson, B C*; Gibson, C*; Machin, G; Ricolfi, T*; Battuello, M*; Fischer, J* (1997) International intercomparisons using round-robin radiation thermometers organised bu NRIM in the last four years. In: Proc. 6th International Conference of Temperature and Thermal Measurements (TEMPBEIJING 97), 1997, Beijing, China.

Salmon, D R (1993) The NPL 610mm guarded hot-plate/heat flow meter standard apparatus for thick insulations. In: Thermal conductivity 22: proceedings of the 22nd international thermal conductivity conference, 7 - 10 November 1993, Tempe, Arizona, USA.

Salmon, D R (1995) The NPL high temperature guarded hot plate. In: Proc. 23rd International Thermal Conductivity Conference, 1995, Nashville, USA.

Salmon, D R (2001) Thermal conductivity of insulations using guarded hot plates, including recent developments and sources of reference materials. Meas. Sci. Technol., 12 (12). R89-R98

Salmon, D R; Tye, R* (2001) An inter-comparison of guarded hot plate and heat flow meter apparatus within the United Kingdom and Ireland. NPL Report. CBTLM 8

Salmon, D R; Tye, R* (2000) An intercomparison of heat flow meter apparatus within the United Kingdom and Eire. High Temp.-High Press., 32 (1). pp. 19-28.

Salmon, D R; Williams, R G; Tye, R P (2002) Thermal conductivity and moisture measurements on masonry materials. ASTM Spec. Tech. Publ., 1426. pp. 58-78.

Sanchez, C A*; Wood, B M*; Inglis, A D*; Robinson, I A (2012) Determination and correction of mass exchange errors in the NRC watt balance. In: 2012 Conference on Precision Electromagnetic Measurements (CPEM 2012), 1-6 July 2012, Washington DC, USA.

Sanchez, C A*; Wood, B M*; Inglis, D*; Robinson, I A (2013) Elimination of mass exchange errors in the NRC watt balance. IEEE Trans. Instrum. Meas., 62 (6). pp. 1506-1511.

Saunders, P*; Fischer, J*; Sadli, M*; Battuello, M*; Park, C W*; Zundong, Y*; Yoon, H*; Li, W*; van der Ham, E*; Sakuma, F*; Yamada, Y*; Ballico, M*; Machin, G; Fox, N P; Hollandt, J*; Matveyev, M*; Bloembergen, P*; Ugar, S* (2008) Uncertainty budgets for calibration of radiation thermometers below the silver point. Int. J. Thermophysics, 29 (3). pp. 1066-1083.

Saunders, P*; Wilson, A; Orchard, N*; Tatman, N*; Maropoulos, P* (2014) An exploration into measurement consistency on coordinate measuring. Procedia CIRP, 25. pp. 19-26.

Savarin, A*; Medina, N*; Knott, A (2016) Force key comparison CCM.F-K2.a.1 (50kN and 100 kN). Metrologia, 53 (1A). 07001.

Schirmer, B*; Venzke, H*; Melling, A*; Edwards, C S; Barwood, G P; Gill, P; Stevens, M; Benyon, R*; Mackrodt, P* (2000) High precision trace humidity measurements with a fibre-coupled diode laser absorption spectrometer at atmospheric pressure. Meas. Sci. Technol., 11. pp. 382-391.

Schmitt, R H*; Peterek, M*; Morse, E*; Knapp, W*; Hartig, F*; Goch, G*; Hughes, B; Forbes, A B; Estler, W T* (2016) Advances in large-scale metrology - review and future trends. CIRP Ann. - Manuf. Technol., 65 (2). pp. 643-665.

Schöttl, S; Brett, D J L* (2006) Applications of thermal imaging in solid oxide fuel cell research. NPL Report. DEPC-TH 007

Schöttl, S; Rusby, R L; Godfrin, H*; Meschke, M*; Goudon, V*; Triqueneaux, S*; Peruzzi, A*; de Groot, M J*; Jochemsen, R*; Bosch, W*; Hermier, Y*; Pitre, L*; Rives, C*; Fellmuth, B*; Engert, J* (2005) Evaluation of SRD1000 superconductive reference devices. J. Low Temp. Phys., 138 (3-4). pp. 941-946.

Scorer, T*; Perkin, M; Buckley, M* (2004) Weighing in the pharmaceutical industry. Measurement Good Practice Guide. 70

Seah, M P; Spencer, S J; Bensebaa, F*; Vickridge, I*; Danzebrink, H*; Krumrey, M*; Gross, T*; Oesterle, W*; Wendler, E*; Rheinlander, B*; Azuma, Y*; Kojima, I*; Suzuki, N*; Suzuki, M*; Tanuma, S*; Moon, D W*; Lee, H J*; Hyun Mo Cho*,, ; Chen, H Y*; Wee, A T S*; Osipowicz, T*; Pan, J S*; Jordaan, W A*; Hauert, R*; Klotz, U*; van der Marel, C*; Verheijen, M*; Tamminga, Y*; Jeynes, C*; Baily, P*; Biswas, S*; Falke, U*; Nguyen, N V*; Chandler-Horowitz, D*; Ehrstein, J R*; Muller, D*; Dura, J A* (2004) Critical review of the current status of thickness measurements for ultrathin SiO2 on Si Part V: results of a CCQM pilot study. Surf. Interface Anal., 36 (9). pp. 1269-1303.

Senin, N*; Blunt, L A*; Leach, R K; Pini, S* (2013) Morphologic segmentation algorithms for extracting individual surface features from areal surface topography maps. Surf. Topogr.: Metrol. Prop., 1 (1). 015005

Senin, N*; MacAulay, G*; Giusca, C L; Leach, R K (2014) On the characterisation of periodic patterns in tessellated surfaces. Surf. Topogr.: Metrol. Prop., 2 (2). 025005

Seraffon, M; Simms, N J*; Nicholls, J R*; Sumner, J*; Nunn, J (2011) Performance of thermal barrier coatings in industrial gas turbine conditions. Mater. High Temp., 28 (4). pp. 309-314.

Severn, I (2004) The assignment of uncertainties to mass standards at NPL. NPL Report. MATC(A)166

Severn, I (2000) A collaboration between ten national measurement institutes to measure the mass of two one kilogram mass standards. NPL Report. CMAM 36

Severn, I; Raymond, N M (1996) The assignment of values to NPL's 1 kg standards following the third periodic verification of prototype kilograms. NPL Report. MOT 2

Sheu, D Y*; Claverley, J D; Leach, R K (2014) Testing the mechanical characteristics and contacting behavior of novel manufactured and assembled sphere-tipped styli for micro-CMM probes. IFIP Advances in Information and Communication Technology, 435. pp. 15-21.

Simpson, D (1998) Pressure & Vacuum. Technical Report. NPL, Teddington.

Simpson, R C; McEvoy, H C; Machin, G; Howell, K*; Naeem, M*; Plassman, P*; Ring, F*; Campbell, P*; Song, C*; Taverner, J*; Ridley, I* (2008) In field-of-view thermal image calibration system for medical thermography applications. In: UNSPECIFIED.

Singleton, L*; Leach, R K; Cui, Z* (2003) Analysis of the MEMSTAND survey on standardisation for microsystems technology. In: Proceedings of the International Seminar MEMSTAND - "Standardisation for Microsystems: the Way Forward"., 24-26 February 2003, Barcelona, Spain.

Smale, D*; Haley, S*; Segal, J*; Ronaldo, R*; Ratchev, S*; Leach, R K; Claverley, J D (2010) Utilisation of FIB/SEM technology in the assembly of an innovative micro-CMM probe. In: 5th International Precision Assembly Seminar (IPAS 2010), February 2010, Chamonix, France.

Smale, D*; Ratchev, S*; Segal, J*; Leach, R K; Claverley, J D (2009) Assembly of the stem and tip of an innovative micro-CMM probe. In: 9th International Conference and Exhibition on Laser Meterology, Machine Tool, CMM and Robotic Performance (LAMDAMAP 2009), 2009.

Smith, E*; Machin, G; Gray, J; Veltchera, R (2010) The use of thermowell bushes at the triple point of water for improving repeatability. Int. J. Thermophysics, 31 (8-9). pp. 1438-1443.

Smith, I M; Harris, P M (2011) Reference software for calculating areal surface texture parameters: User manual. NPL Report. MS 14

Stacey, C (2002) NPL vacuum guarded hot-plate for measuring thermal conductivity and total hemispherical emittance of insulation materials. ASTM Spec. Tech. Publ., 1426. pp. 130-146.

Stanbury, G; Davis, F (2000) Provision of hardness standards - final report. NPL Report. CMAM 53

Stanbury, G; Elkington, D (1999) Proposed future research for hardness standards. NPL Report. CMAM 31

Stedman, M; Franks, A (1995) The UK national surface texture measuring facility. In: 125th International Seminar on Quantitative Microscopy, October 1995, Brunswick, Germany.

Stedman, M; Franks, A; Luty, M (1996) Measurement of the microthrust of the field emission electric propulsion unit. In: Proc. 2nd European spacecraft propulsion conference, 1996.

Stevens, M (1998) Improved flow rate monitoring of the NPL high dew-point generator. NPL Report. CMAM 13

Stevens, M (1998) Study of alternative fluids for use in the humidity generator at NPL. NPL Report. CMAM 14

Stevens, M (1998) Uncertainty evaluation of the relative humidity facility at NPL. NPL Report. CMAM 15

Stevens, M; Armitage, D (1996) Uncertainty evaluation of the NPL standard humidity generator. NPL Report. MOT 7

Stevens, M; Benyon, R*; Bell, S A; Vicente, T* (2008) A trial intercomparison of humidity generators at extremes of range using relative humidity transmitters. Int. J. Thermophysics, 29 (5). pp. 1685-1695.

Stevens, M; Collier, T; Harris, R* (2000) Comparison of instruments for measuring relative humidity. NPL Report. CBTLM 6

Stoyanov, S*; Bailey, C*; Leach, R K; Hughes, B; Wilson, A; O'Neill, W*; Dorey, R A*; Shaw, C*; Underhill, D*; Almond, H J* (2008) Modelling and prototyping the conceptual design of 3D CMM micro-probe. In: 2nd Electronics Systemintegration Technology Conference, 2008, Greenwich, UK.

Stoyanov, S*; Rajagura, P*; Tang, Y K*; Bailey, C*; Claverley, J; Leach, R K (2010) Reduced order modelling for risk mitigation in design of miniaturised/integrated products. In: 33rd International Spring Seminar on Electronics Technology, 12-16 May 2010, Warsaw, Poland.

Stuart, P R (1995) EUROMET Project 220: recommended procedure for the calculation and expression of pressure balance measurement uncertainties. NPL Report. MOM 122

Stuart, P R (1993) Measurement uncertainties of U-tube manometers and pressure balances. Metrologia, 30. 727 - 735

Stuart, P R (1993) Progress report on an international comparison in the pressure range 10 kPa to 140 kPa. Metrologia, 30. 705 - 709

Stuart, P R (1995) Recommended contents for pressure balance calibration certificates (part of EUROMET Project 220). NPL Report. MOM 123

Sun, U*; Folkes, C*; Gindy, G*, Leach (2010) Variation risk analysis: MEMS fabrication tolerance for a micro CMM probe. Int. J. Adv. Manufact. Technol., 47 (9-12). pp. 1113-1320.

Sun, W; Brown, S B; Flay, N; McCarthy, M B; McBride, J* (2016) A reference sample for investigating the stability of the imaging system of x-ray computed tomography. Meas. Sci. Technol., 27 (8). 085004

Sun, W; Brown, S B; Leach, R K (2012) An overview of industrial X-ray computed tomography. NPL Report. ENG 32

Sun, W; Giusca, C; Lancaster, A (2017) Surface texture measurements of gear surfaces using stylus instruments. Measurement Good Practice Guide. 147

Sun, W; Leach, R K (2010) Advanced optical techniques for the measurement of the internal geometry of MEMS structures. Proc. SPIE - Int. Soc. Opt. Eng., 7544. pp. 754461-1.

Sun, W; Leach, R K (2010) Measurement of the internal geometry of MEMS structures. NPL Report. ENG 24

Sun, W J; Claverley, J D (2015) Verification of an optical micro-CMM using the focus variation technique: aspects of probing errors. CIRP Ann. - Manuf. Technol., 64 (1). pp. 511-514.

Sutton, G; Edwards, G J; Veltcheva, R I; de Podesta, M (2015) Twin-tube Practical acoustic thermometry: theory and measurements up to 1000 °C. Supercond. Sci. Technol., 28 (8). 085901

Sutton, G; Levick, A P; Edwards, G J; Greenhalgh, D* (2006) A combustion temperature and species standard for the calibration of laser diagnostic techniques. Combust. Flame, 147. pp. 39-48.

Sutton, G; Rusby, R L (1999) Intercomparison of the freezing point of Indium. Euromet Project No. 391 NPL measurements. NMSPU Project Reference 11B17. NPL Report. CBTM 6

Sutton, G; de Podesta, M; Veltcheva, R I; Gélat, P N; Minh, H D; Edwards, G (2013) Practical acoustic thermometry with acoustic waveguides. AIP Conf. Proc., 1552. pp. 943-948.

Sutton, G J M (2014) Acoustic gas thermometry: models and corrections for argon from 90 K to 1500 K. NPL Report. ENG 49

Sutton, G J M (2009) Determination of the boltzmann constant: acoustic models and corrections for argon and helium. NPL Report. ENG 19

Sutton, G J M (2016) The NPL standard flame: operating instructions. NPL Report. ENG 65

Sutton, G J M (2009) Uncertainty in the TBLC and bulk dissipation corrections for TCU1 / argon. NPL Report. ENG 20

Sutton, G J M (2010) Uncertainty in the TBLC and bulk dissipation corrections for the one litre spheres NPL1 and NPL2, filled with argon at T=273.16K. NPL Report. ENG 25

Sutton, G J M; Underwood, R J; Pitre, L*; de Podesta, M; Valkiers, S* (2010) Acoustic resonator experiments at the triple point of water: first results for the Boltzmann constant and remaining challenges. Int. J. Thermophysics, 31 (7). pp. 1310-1346.

T

Tan, J B*; Wang, C*; Wang, Y*; Wang, W B*; Liu, J*; Leach, R K; Hao, L (2014) Long working distance microscope with a low obscuration aspherical Schwarzschild objective. Opt. Lett., 39 (23). pp. 6699-6702.

Teixeira, R N*; Machin, G (2017) Long-term stability evaluation of a Sn-doped Ni-C eutectic cell suitable for radiation thermometry. Int. J. Thermophysics, 38 (6). p. 80.

Teixeira, R N*; Machin, G; Orlando, A* (2013) Towards the development of high temperature comparison artifacts for radiation thermometry. AIP Conf. Proc., 1552. pp. 363-368.

Teixeira, R*; Machin, G; Orlando, A* (2014) Development of high-temperature fixed points of unknown temperature suitable for key comparisons. Int. J. Thermophysics, 35 (3). pp. 467-474.

Tew, W L*; Rusby, R L; Lin, P*; Lipinski, L*; Steur, P P M*; Ricketson, B W A* (2015) A standardized interpolation of temperature using rhodium-iron resistance thermometers over the interval 4.2 K to 24.5 K. Int. J. Thermophysics, 36 (8). pp. 2036-2059.

Todd, A D W*; Lowe, D H; Dong, W*; Woods, D J* (2013) Comparison of realizations of Re-C fixed points filled and measured at NPL and NRC. AIP Conf. Proc., 1552. pp. 797-801.

Towey, C*; Easton, C*; Simpson, R; Pedlar, C* (2017) Conventional and novel body temperature measurement during rest and exercise induced hyperthermia. J. Thermal Biol., 63. pp. 124-130.

Triantaphyllou, A*; Giusca, C L; Macaulay, G D; Roerig, F*; Hoebel, M*; Leach, R K*; Tomita, B*; Milne, K A* (2015) Surface texture measurement for additive manufacturing. Surf. Topogr.: Metrol. Prop., 3 (2). 024002

Tye, R P; Kubicar, L*; Lockmuller, N* (2005) The development of a standard for contact transient methods of measurement of thermophysical properties. Int. J. Thermophysics, 26 (6). pp. 1917-1938.

Tye, R P; Salmon, D R (2002) NPL initiatives in the development of thermal properties reference materials. Int. J. Thermophysics, 23 (4). pp. 1047-1061.

U

Underwood, R; Flack, D R; Morantz, P*; Sutton, G; Shore, P*; de Podesta, M (2011) Dimensional characterisation of a quasispherical resonator by microwave and coordinate measurement techniques.. Metrologia, 48 (1). pp. 1-15.

Underwood, R; Gardiner, T; Finlayson, A; Bell, S A; de Podesta, M (2017) An improved non-contact thermometer and hygrometer with rapid response. Metrologia, 54 (1). S9-S15

Underwood, R; Gardiner, T; Finlayson, A; Few, J; Wilkinson, J; Bell, S A; Merrison, J*; Iverson, J J*; de Podesta, M (2015) A combined non-contact acoustic thermometer and infrared hygrometer for atmospheric measurements. Meteorological Applications, 22. pp. 830-835.

Underwood, R; de Podesta, M; Sutton, G; Stanger, L; Rusby, R; Harris, P; Morantz, P; Machin, G (2017) Further estimates of (T - T-90) close to the triple point of water. Int. J. Thermophysics, 38 (3). p. 44.

Underwood, R; de Podesta, M; Sutton, G; Stanger, L; Rusby, R; Harris, P M; Morantz, P*; Machin, G (2016) Estimates of the difference between thermodynamic temperature and the International Temperature Scale of 1990 in the range 118 K to 303 K. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150048

Underwood, R J; Cuccaro, R*; Bell, S A; Gavioso, R M*; Ripa, D M*; Stevens, M; de Podesta, M (2012) A microwave resonance dew-point hygrometer. Meas. Sci. Technol., 23 (8). 085905

Underwood, R J; Davidson, S; Perkin, M; Morantz, P*; Sutton, G; de Podesta, M (2012) Pyknometric volume measurement of a quasispherical resonator. Metrologia, 49 (3). pp. 245-256.

Underwood, R J; Edwards, G J (2014) Microwave dimensional measurements of cylindrical resonators for primary acoustic thermometry. Int. J. Thermophysics, 35 (6-7). pp. 971-984.

Underwood, R J; Mehl, J B*; Pitre, L*; Edwards, G; Sutton, G; de Podesta, M (2010) Waveguide effects on quasispherical microwave cavity resonators. Meas. Sci. Technol., 21 (7). 075103

V

Valkiers, S*; Vendelbo, D*; Berglund, M*; de Podesta, M (2010) Ar primary measurements standards for the calibration of argon isotopes. Geochimica et Cosmochimica Acta, 74 (12, Su). A1069.

Valkiers, S*; Vendelbo, D*; Berglund, M*; de Podesta, M (2010) Preparation of argon primary measurement standards for the calibration of ion current ratios measured in argon. Int. J. Mass Spectrom., 291 (1-2). pp. 41-47.

Veltcheva, R I; Pearce, J V; da Silva, R*; Machin, G; Rusby, R L (2013) Strategies for minimising the uncertainty of the SPRT self-heating correction. AIP Conf. Proc., 1552. pp. 433-438.

Veltcheva, R*; Musial, L*; Machin, G; Gray, J (2012) Improvements in the measurement of the immersion profile of water triple points using bushes. Meas. Tech., 55 (4). pp. 442-447.

Vescovo, E*; Levick, A P; Childs, C*; Machin, G; Zhao, S*; Williams, S R* (2013) High-precision calibration of MRS thermometry using validated temperature standards: effects of ionic strength and protein content on the calibration. NMR Biomed., 26 (2). pp. 213-223.

Virdee, M (1995) Non-contacing straightness measurement to nanometre accuracy. Int. J. Mach. Tools Manufact., 35 (2). 157 -164

Virdee, M (1993) A new approach for establishing a reference plane for absolute measurement of shape and flatness with nanometre precision. NPL Report. MOM 114

van der Ham, E W M*; Battuello, M*; Bloembergen, P*; Bosma, R*; Clausen, S*; Enouf, O*; Filipe, E*; Fischer, J*; Gutschwager, B*; Hirvonen, T*; Machin, G (2001) Intercomparison of local temperature scales with transfer standard radiation thermometers between -50 ºC and 800 ºC. In: TEMPMEKO 01, June 2001, Berlin, Germany.

W

Wang, J; Leach, R K; Jiang, X* (2014) Advances in sampling techniques for surface topography measurement - a review. NPL Report. ENG 55

Wang, J; Leach, R K; Jiang, X* (2014) Review of data fusion for surface topography measurement. NPL Report. ENG 54

Wang, J*; Jiang, X Q*; Gurdak, E; Scott, P*; Leach, R K; Tomlins, P; Blunt, L* (2011) Numerical characterisation of biomedical titanium surface texture using novel feature parameters. Wear, 271 (7-8). pp. 1059-1065.

Wang, J*; Jiang, X*; Blunt, L A*; Leach, R K; Scott, P J* (2011) Efficiency of adaptive sampling in surface texture measurement for structured surfaces. IOP Conf. Ser., 311. 012017

Wang, J*; Jiang, X*; Blunt, L A*; Leach, R K; Scott, P J* (2011) Efficiency of adaptive sampling in surface texture measurement for structured surfaces. In: 13th International Conference on Metrology and Properties of Engineering Surfaces., 12-15 April 2011, Twickenham Stadium, UK.

Wang, J*; Jiang, X*; Blunt, L A*; Leach, R K; Scott, P J* (2012) Intelligent sampling for the measurement of structured surfaces. Meas. Sci. Technol., 23 (8). 085006

Wang, J*; Jiang, X*; Blunt, L A*; Leach, R K; Scott, P J* (2012) A boundary segmentation algorithm for extracting micro-scale dimensional parameters in the measurement of structured surfaces. In: 12th euspen International Conference, 4-8 June 2012, Stockholm, Sweden.

Wang, T*; Lowe, D; Machin, G (2009) Manufacturing of MC eutectics and reproducibility of Pt-C eutectic fixed points using a thermogauge furnace. Int. J. Thermophysics, 30 (1). pp. 59-68.

Warden, M S (2014) Precision of frequency scanning interferometry distance measurements in the presence of noise. Appl. Opt., 53 (25). pp. 5800-5806.

Webster, C H; Kazakova, O; Gallop, J C; Josephs-Franks, P W; Hernandez-Minguez, A*; Tzalenchuk, A Ya (2007) Influence of thermal coupling on spin avalanches in Mn12-acetate. Phys. Rev. B Condens. Matter, 76. 012403

Webster, E S*; Greenen, A; Pearce, J (2016) Measurement of the inhomogeneity in type B and land-jewell noble-metal thermocouples. Int. J. Thermophysics, 37 (7). p. 70.

Webster, E*; Mason, R*; Greenen, A; Pearce, J (2015) A system for high-temperature homogeneity scanning of noble-metal thermocouples. Int. J. Thermophysics, 36 (10-11). pp. 2922-2939.

Weichert, C*; Köchert, P*; Köning, R*; Flügge, J*; Andreas, B*; Kuetgens, U*; Yacoot, A (2012) A heterodyne interferometer with nonlinearities smaller than ±10 pm. Meas. Sci. Technol., 23 (9). 094005

Willett, K M*; Dunn, R J H*; Thorne, P W*; Bell, S A; de Podesta, M; Parker, D E*; Jones, P D*; Williams, C N* (2014) HadISDH land surface multi-variable humidity and temperature record for climate monitoring. Climate of the Past, 10 (6). pp. 1983-2006.

Willett, K M*; Williams, C N*; Dunn, R J H*; Thorne, P W*; Bell, S A; de Podesta, M; Jones, P D*; Parker, D E* (2013) HadISDH: An updated land surface specific humidity product for climate monitoring. Climate of the Past, 9 (2). pp. 657-677.

Williams, E*; Robinson, I A (2011) Superconductivity and the SI (Metric) systems based on fundamental constants. In: 100 years of Superconductivity. Taylor & Francis. ISBN 9781439849460

Williams, R G (1996) Interim report SM&T Framework III project 3032 - calibration panels for thermal transmittance of glazed assemblies. NPL Report. QM 122

Williams, R G (2002) Overview of a project to determine the thermal resistance of masonry walls in dry and moist states and a conversion procedure to determine the appropriate design value. In: 6th International Symposium on Building Physics in the Nordic Countries, 2002.

Williams, R G; Ballard, G (2002) Calibration of a surround panel used to measure window U-values in a hot box apparatus as specified in BS EN ISO 12567-1:2000. NPL Report. CBTLM 18

Williams, R G; Ballard, G (2003) Calibration of a surround panel used to measure window and door U-values in the rotatable hot box apparatus as specified in BS EN ISO 12567-1:2000. NPL Report. CBTLM 26

Williams, R G; Ballard, G (2003) Validation of the NPL rotatable wall guarded hot box with horizontal heat flow. NPL Report. CBTLM 25

Williams, R G; Ballard, G (2004) An evaluation of the effect of high performance spacer bars on the thermal performance of a range of window systems. NPL Report. DEPC-TH 001

Williams, R G; Ballard, G (2004) An investigation of measurement procedures needed to determine thermal transmittance of deep structures using both horizontal and vertical heat flow. NPL Report. DEPC-TH 002

Williams, R G; Hall, D A (1998) Laboratory intercomparison of Hot Box measurements of a glazed window system using the measurement procedures given in ISO/DIS 12567 and prEN 12412-1 standards. NPL Report. CBTM 5

Williams, R G; Hall, D A (1995) Report on hot box measurements made of two 1.48m x 1.23m glazed, calibrated reference panels as specified in ISO/CD 12567 and CEN/TC 89 WI 26 part 2 03.1995. NPL Report. QM 115

Williams, R G; Hall, D A (1997) SM&T Project 3032 - Contract MATI-CT 940063. Final summary report - Design and validation of glazed calibration panels required for the measurement of thermal transmittance of glazed assemblies. NPL Report. CBTM 2

Williams, R G; Hall, D A (1997) SM&T Project 3032 - Contract MATI-CT 940063. Report of the NPL hot box measurements using the procedures specified in prEN 12412-1 with 1.2m X 1.2m glazed calibration panels. NPL Report. CBTM 1

Williams, R G; Hall, D J (1997) DOE Research contract 39/3/279 - Hot-box measurements of eight window systems. NPL Report. QM 132

Williams, R G; Harris, R* (1997) DOE Research contract 39/3/279 - Comparison between the measured, simulated and calculated U-values of eight window systems. NPL Report. QM 131

Williams, R G; Harris, R* (1996) Department of the Environment, partners in technology, technical infrastructure programme. Validation of thermal performance design tools for window frame construction: an independent verification by agreed measurement procedures. Report on phase 1 - comparison between the measured and simulated U-values of three window systems comprising a thermally broken aluminium frame, a PVC-U frame and a hardwood frame. NPL Report. QM 119

Williams, R G; Tye, R (2003) Validation of measurement techniques and the determination of data required for thermal modelling of moist masonry walls. In: 2nd International Conference on Building Physics, 2003, Leuven, Belgium.

Willmott, J R*; Lowe, D; Broughtom, M*; White, B S*; Machin, G (2016) Potential for improved radiation thermometry measurement uncertainty through implementing a primary scale in an industrial laboratory. Meas. Sci. Technol., 27 (9). 094002

Wilson, A; Leach, R K (2009) Manufacturing and testing of a micro-stylus suitable for tactile probing in dimensional metrology. NPL Report. ENG 15

Woolliams, E R; Machin, G; Lowe, D H; Winkler, R (2006) Metal (carbide)-carbon eutectics for thermometry and radiometry: a review of the first seven years. Metrologia, 43. R11-R25

Y

Yacoot, A; Cross, N R (2003) Measurement of picometre non-linearity in an optical grating encoder using x-ray interferometry. Meas. Sci. Technol., 14. pp. 148-152.

Yacoot, A; Downes, M*; Flügge, J* (2005) Interferometric length measurement. MAPAN, J. Metrol. Soc. India, 20 (2). pp. 99-114.

Yacoot, A; Downs, M J (2000) The use of x-ray interferometry to investigate the linearity of the NPL differential plane mirror optical interferometer. Meas. Sci. Technol., 11. pp. 1126-1130.

Yacoot, A; Koenders, L* (2008) Aspects of scanning force microscope (SFM) cantilevers and tips and their effects on dimensional measurement. J. Phys. D, Appl. Phys., 41 (10). 103001

Yacoot, A; Koenders, L* (2003) From nanometre to millimetre: a feasibility study of the combination of scanning probe microscopy and combined optical and X-ray interferometry. Meas. Sci. Technol., 14 (9). N59-N63

Yacoot, A; Koenders, L* (2011) Recent developments in dimensional metrology using AFMs. Meas. Sci. Technol., 22 (12). 122001

Yacoot, A; Kuetgens, U* (2012) Sub-atomic dimensional metrology: developments in the control of x-ray interferometers. Meas. Sci. Technol., 23 (7). 074003

Yacoot, A; Kuetgens, U*; Koenders, L*; Weimann, T* (2001) A combined scanning tunnelling microscope and x-ray interferometer. Meas. Sci. Technol., 12. pp. 1660-1665.

Yacoot, A; Leach, R K (2007) Review of x-ray and optical thin film measurement methods and transfer artefacts. NPL Report. DEPC-EM 013

Yacoot, A; Leach, R K; Hughes, B; Giusca, C; Jones, C W; Wilson, A (2009) Dimensional nanometrology at The National Physical Laboratory. Proc. SPIE - Int. Soc. Opt. Eng., 7133. pp. 713345-1.

Yamada, Y*; Anhalt, K*; Battuello, M*; Bloembergen, P*; Khlevnoy, B*; Machin, G; Matveyev, M*; Sadli, M*; Wang, T* (2013) Construction of high-temperature fixed-point cells for thermodynamic temperature assignment. AIP Conf. Proc., 1552. pp. 335-339.

Yamada. Y*,, ; Anhalt, K*; Battuello, M*; Bloembergen, P*; Khlevnoy, B*; Machin, G; Matveyev, M*; Sadli, M*; Todd, A*; Wang, T* (2015) Evaluation and selection of high-temperature fixed-point cells for thermodynamic temperature assignment. Int. J. Thermophysics, 36 (8). pp. 1834-1847.

Yang, T*; Henning, A J; Benedict, K A* (2014) Vortex interactions in the collision of Bose-Einstein condensates. Laser Phys., 24 (11). 115502

Z

Zelenka, Z*; Davidson, S; Berry, J J; Vamossy, C* (2015) Final report on EURAMET key comparison EURAMET.M.M-K2.6 (1345) of mass standards of 100 mg, 2 g, 20 g, 500 g (sub-multiple of the kilogram). Metrologia, 52 (1A). 07010.

Zelenka, Z*; Davidson, S; Vamossy, C* (2016) Bilateral comparison on volume of mass standards. Metrologia, 53 (1A). 07007.

Zeng, W*; Jiang, X*; Smith, I M; Scott, P* (2010) Transient signal separation in Watt balance experiements. Phys. Lett. A, 374 (11-12). pp. 1301-1306.

Zhang, B; Levick, A P; Edwards, G J (2007) Development of spectral radiation thermometry in high ambient temperatures. NPL Report. DEPC-TH 009

Zhang, B; Redgrove, J; Clarke, J D (2004) A transient method for total emissivity estimation. Int. J. Thermophysics, 25 (2). pp. 423-438.

Zhang, Z*; Machin, G (2009) Overview of radiation thermometry. Exp. Methods Phys. Sci., 42. pp. 1-28.

Zou, L; Hunt, C (2013) Guideline for measuring coating adhesion to electronic boards using tape peel testing. Measurement Good Practice Guide. 117