A

Abir, J*; Longo, S*; Morantz, P*; Shore, P (2016) Optimized estimator for real-time dynamic displacement measurement using accelerometers. Mechatronics, 39. pp. 1-11.

Abir, J*; Longo, S*; Morantz, P*; Shore, P (2017) Virtual metrology frame technique for improving dynamic performance of a small size machine tool. Precision Eng., 48. pp. 24-31.

Abir, J*; Morantz, P*; Longo, S*; Shore, P (2016) A novel accelerometer based feedback concept for improving machine dynamic performance. IFAC - Papers Online, 49 (21). pp. 553-558.

Acko, B*; McCarthy, M; Haertig, F*; Buchmeister, B* (2012) Standards for testing freeform measurement capability of optical and tactile co-ordinate measuring machines. Meas. Sci. Technol., 23 (9). 094013

Ametova, E; Ferrucci, M; Chilingaryan, S; Dewulf, W (2018) A computationally inexpensive model for estimating dimensional measurement uncertainty due to x-ray computed tomography instrumentation misalignments. Measurement Science and Technology, 29 (6). 065007

Atkins, C; Brzozowski, W; Dobson, N; Milanova, M; Todd, S; Pearson, D; Bourgenot, C J; Brooks, D; Snell, R M; Sun, W; Cooper, P; Alcock, S G; Nistea, I T; Hallibert, P; Hull, T B; Kim, D W (2019) Additively manufactured mirrors for CubeSats. Proceedings of the SPIE, 11116. 1111616

Atkins, C; Brzozowski, W; Dobson, N; Milanova, M; Todd, S; Pearson, D; Bourgenot, C J; Brooks, D; Snell, R M; Sun, W; Cooper, P; Alcock, S G; Nistea, I T; Hallibert, P; Hull, T B; Kim, D W (2019) Lightweighting design optimisation for additively manufactured mirrors. Proccedings of the SPIE, 11116. 1111617

Austin, R S*; Giusca, C L; Macaulay, G; Moazzez, R*; Bartlett, D W* (2016) Confocal laser scanning microscopy and area-scale analysis used to quantify enamel surface textural changes from citric acid demineralisation and salivary remineralisation in vitro. Dental Materials, 32 (2). pp. 278-284.

B

Babij, M; Majstrzyk, W; Sierakowski, A; Janus, P; Grabiec, P; Ramotowski, Z; Yacoot, A; Gotszalk, T (2021) MEMS displacement generator for atomic force microscopy metrology. Measurement Science and Technology, 32 (6). 065903 ISSN 0957-0233

Bailey, S L C; Lewis, A; Whiting, K; Lingard, M (2017) Care and use of gauge blocks. Measurement Good Practice Guide. 149

Bakucz, P*; Yacoot, A; Dziomba, T*; Krüger-Sehm, R* (2008) Neural network approximation of tip-abrasion effects in AFM-imaging. Meas. Sci. Technol., 19 (6). 065101

Barnett, M E*; Turner, N P (1993) Phase information in the coherent imaging of abrupt edges. Opt. Commun., 96. pp. 27-35.

Bartlett, G; Heaps, E; Clarke, J; Frost, S; Patel, J; Levy, S; Raby, A; Yacoot, A (2021) Demonstration of closed loop velocity control for fast imaging techniques using high-speed AFM. In: euspen's 21st International Conference & Exhibition, 7-18 June 2021, Copenhagen, Denmark.

Barwood, G P; Gill, P; Rowley, W R C (1993) Laser diodes for length determination using swept-frequency interferometry. Meas. Sci. Technol., 4 (9). pp. 988-994.

Basile, G*; Becker, P*; Bergamin, A*; Cavagnero, G*; Franks, A; Jackson, K; Kuetgens, U*; Mana, G*; Palmer, E W; Robbie, C J; Stedman, M; Stumpel, J*; Yacoot, A; Zosi, G* (1993) COXI - Combined optical and x-ray interferometry for high precision dimensional metrology. In: 7th International Precision Engineering Seminar, May 1993, Kobe, Japan.

Basile, G*; Becker, P*; Bergamin, A*; Cavagnero, G*; Franks, A; Jackson, K; Kuetgens, U*; Mana, G*; Palmer, E W; Robbie, C J; Stedman, M; Stumpel, J*; Yacoot, A; Zosi, G* (2000) Combined optical and x-ray interferometry for high precision dimensional metrology. Proc. R. Soc. Lond. A, 456. pp. 701-729.

Bausi, F; Koutsourakis, G; Blakesley, J C; Castro, F A (2019) High-speed digital light source photocurrent mapping system. Measurement Science and Technology, 30 (9). 095902 ISSN 0957-0233

Bayliss, D J; Leach, R K; Hall, M J (2006) Development of an electromagnetic spring for use with a high accuracy surface texture measuring probe. NPL Report. DEPC-EM 006

Birch, K P; Reinboth, F*; Ward, R E; Wilkening, G* (1993) The effect of variations in the refractive index of industrial air upon the uncertainty of precision length measurement. Metrologia, 30 (1). pp. 7-14.

Blunt, L*; Jiang, X*; Leach, R K; Harris, P M; Scott, P* (2005) The development of user-friendly software measurement standards for surface topography software assessment. In: Proceedings 10th International Conference on Metrology and Properties of Engineering Surfaces, 4-7 July 2005, St Ettiane, France.

Blunt, L*; Jiang, X*; Xiao, S*; Li, T*; Feng, X*; Brennan, J*; Scott, P*; Leach, R K; Harris, P M; Parkin, G I (2005) Development and dissemination of SOFTGAUGES for surface topography. Technical Report. Centre for Precision Technologies, University of Huddersfield.

Blunt, L*; Leach, R K; Jiang, X*; Scott, P*; Harris, P M; Xiao, S*; Li, T*; Parkin, G I (2005) Development of softgauges for surface metrology. In: 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 8-11 May 2005, Montpellier, France.

Blunt, L*; Xiang Jiang*,, ; Leach, R K; Harris, P M; Scott, P* (2008) The development of user-friendly software measurement standards for surface topography software assessment. Wear, 264 (5-6). pp. 389-393.

Bosse, H; Kunzmann, H; Pratt, J R; Schlamminger, S; Robinson, I; de Podesta, M; Shore, P; Balsamo, A; Morantz, P (2017) Contributions of precision engineering to the revision of the SI. CIRP Annals - Manufacturing Technology, 66 (2). pp. 827-850.

Brennan, J K*; Crampton, A*; Jiang, X*; Leach, R K; Harris, P M (2005) Approximation of surface texture profiles. J. Phys., Conf. Ser., 13. pp. 264-267.

Brennan, J K*; Crampton, A*; Jiang, X*; Leach, R K; Harris, P M (2005) Reconstruction of continuous surface profiles from discretely sampled data. In: 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 8-11 May 2005, Montpellier, France.

Brennan, J K*; Mason, J C*; Jiang, X*; Leach, R K; Harris, P M (2004) Approximation of surface texture profiles and parameters. In: 4th euspen International Conference, 31 May 2004 - 2 June 2004, Glasgow, UK.

Brice, L K W; Morris, S*; Motely, J*; Leach, R K (2008) Measurement of single and multi layer thin film coatings for medical implants. In: euspen 2008, 18-22 May 2008, Zurich.

Brice, L K W; Morris, S*; Motely, J*; Leach, R K (2008) Measurement of single and multi layer thin film coatings for medical implants. NPL Report. ENG 10

Bridges, A; Yacoot, A; Kissinger, T; Humphreys, D A; Tatam, R P (2021) Correction of periodic displacement non-linearities by two-wavelength interferometry. Measurement Science and Technology, 32 (12). 125202

Bridges, A; Yacoot, A; Kissinger, T; Tatam, R P (2020) Polarization-sensitive transfer matrix modeling for displacement measuring interferometry. Applied Optics, 59 (25). 7694 ISSN 1559-128X

Brown, S; Stevens, R; Williams, D; McCarthy, M (2017) Colour imperfections in structured light projection for freeform measurement - a rapid test. Imaging Science Journal, 65 (5). pp. 293-298.

Burke, T*; Leach, R K; Boyd, R; Gee, M G; Roy, D; Yacoot, A; Ulrich-Danzebrink, H*; Dziomba, T*; Koenders, L*; Depero, L E*; Carneiro, K*; Dirschel, K*; Morazzani, V*; Lausmaa, J*; Pendrill, L*; Pidduck, A*; Roebben, G*; Sánchez, A*; Unger, W E S*; Proykova, A* (2011) European Nanometrology 2020. Technical Report. Co-Nanomet.

Burt, D P*; Dobson, P S*; Docherty, K E*; Jones, C W; Leach, R K; Thoms, S*; Weaver, J M R*; Zhang, Y* (2012) Aperiodic interferometer for six degrees of freedom position measurement. Opt. Lett., 37 (7). pp. 1247-1249.

Butler, B P; Music, V; Redgrave, F J (1999) Influence of orifice geometry on the simplification of transmission probability calculations. Vacuum, 53 (1-2). pp. 163-166.

C

Callendar, M J*; Efstathiou, A*; King, C W*; Walker, D D*; Gee, A E*; Lewis, A J; Oldfield, S; Steel, R M (2006) A 1m swing arm profilometer for large telescope mirror element. In: Proc. ASPE 2006 Annual Meeting, October 2006, Moterey, CA, USA.

Callender, M J*; Efstathiou, A*; King, C W*; Walker, D D*; Gee, A E*; Lewis, A J; Oldfield, S; Steel, R M (2006) A swing arm profilometer for large telescope mirror element metrology. Proc. SPIE - Int. Soc. Opt. Eng., 6273. 62732R

Campbell, M A; Hughes, B; Blanchard, J; Heaps, J (2023) Frequency Scanning Interferometry and K-space Clocking with Dispersion Compensating Fibre. In: 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 22-25 May 2023, Kuala Lumpur, Malaysia.

Celik, M*; Hamid, R*; Kuetgens, U*; Yacoot, A (2012) Picometre displacements measurements using a differential Fabry-Perot optical Interferometer and an x-ray interferometer. Meas. Sci. Technol., 23 (8). 085901

Chesna, J W*; Shimizu, Y*; Leach, R K (2013) On the use of mercury sessile drops as reference artefacts for the calibration of optical surface topography measuring instruments. In: 28th Annual Meeting of the American Society for Precision Engineering., 20-25 October 2013, St. Paul, Minnesota, USA.

Chetwynd, D G*; Leach, R K (2002) Dynamic performance of a cantilever-based topography. In: 3rd Internation Conference of the European Society for Precision Engineering and Nanotechnology (euspen), 26-30 May 2002, Eindhoven, The Netherlands.

Chetwynd, D*; Howell, G*; Leach, R K (2002) Evaluation of the dynamic performance of a glass cantilever style constant force probe for the measurement of surface texture. NPL Report. CBTLM 23

Chretien, S; Giampiccolo, C; Sun, W; Talbott, J (2021) Fast hyperparameter calibration of sparsity enforcing penalties in Total Generalised Variation penalised reconstruction methods for XCT using a planted virtual reference image. Mathematics, 9 (22). 2960

Chretien, S; Lohvithee, M; Sun, W; Soleimani, M (2020) Efficient Hyper-Parameter Selection in Total Variation-Penalised XCT Reconstruction Using Freund and Shapire’s Hedge Approach. Mathematics, 8 (4). 493 ISSN 2227-7390

Claverley, J D; Burisch, A*; Leach, R K; Raatz, A* (2012) Semi-automated assembly of a MEMS-based micro-scale CMM probe and future optimization of the process chain with a view to desktop factory automation. In: Precision Assembly Technologies and Systems 6th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2012,, 12-14 February 2012, Chamonix, France.

Claverley, J D; Coupland, J M*; Leach, R K (2010) Measurement of the form and layer thickness of the target spheres for inertial confinement fusion. NPL Report. ENG 26

Claverley, J D; Georgi, A*; Leach, R K (2010) Modelling the interaction forces between an ideal measurement surface and the stylus tip of a novel vibrating micro-scale CMM probe. In: 5th International Precision Assembly Seminar (IPAS 2010), February 2010, Chamonix, France.

Claverley, J D; Leach, R K (2013) Development of a three-dimensional vibrating tactile probe for miniature CMMs. Precision Eng., 37 (2). pp. 491-499.

Claverley, J D; Leach, R K (2010) Investigation into the fixturing techniques used by the project partners in the EUMINAfab consortium. NPL Report. ENG 28

Claverley, J D; Leach, R K (2010) Micro-scale co-ordinate metrology at the National Physical Laboratory. In: 36th International MATADOR Conference, 14 - 16 July 2010, Manchester, UK.

Claverley, J D; Leach, R K (2013) Three-dimensional characterisation of a novel vibrating tactile probe for miniature CMMs. In: Laser Metrology and Machine Performance X (LAMDAMAP 2013), 20-21 March 2013, Chicheley, UK.

Claverley, J D; Leach, R K (2010) A novel three-axis vibrating micro-CMM probe with isotropic probing forces. In: Proceedings of the 10th International Conference of the European Society for Precision Engineering & Nanotechnology (euspen), 31 May - 4 June 2010, Delft, Netherlands.

Claverley, J D; Leach, R K (2015) A review of the existing performance verification infrastructure for micro-CMMs. Precision Eng., 39. pp. 1-15.

Claverley, J D; Leach, R K (2010) A vibrating micro-scale CMM probe for measuring high aspect ratio structures. Microsyst. Technol., 16 (8-9). pp. 1507-1512.

Claverley, J D; Sheu, D-Y*; Burisch, A*; Leach, R K; Raatz, A* (2011) Assembly of a novel MEMS-based 3D vibrating micro-scale co-ordinate measuring machine probe using desktop factory automation. In: IEEE International Symposium on Assembly and Manufacturing (ISAM) 2011, 25-27 May 2011.

Corbett, A D; Shaw, M; Yacoot, A; Jefferson, A; Schermelleh, L; Wilson, T; Booth, M; Salter, P S (2018) Microscope calibration using laser written fluorescence. Optics Express, 26 (17). pp. 21887-21899. ISSN 1094-4087

Corcoran, H C; Brown, S B; Robson, S*; Speller, R D*; McCarthy, M B (2016) Observations on the performance of X-ray computed tomography for dimensional metrology. International Archives of the Photogrammetry Remote Sensing and Spatial Information Sciences, 41 (B5). pp. 25-31.

Corta, R*; Cox, M G; Cross, N R; Dotson, J R; Flack, D R; Forbes, A B; O'Donnell, J*; Peggs, G N; Prieto, E* (1998) A large reference artefact for CMM verification. NPL Report. CLM 6

Coupland, J M*; Mandal, R*; Palodhi, K*; Leach, R K (2013) Coherence scanning interferometry: linear theory of surface measurement. Appl. Opt., 52 (16). pp. 3662-3670.

Coveney, T (2014) Dimensional measurement using vision systems. Measurement Good Practice Guide. 39

Coveney, T (2020) A review of state-of-the-art 1D length scale calibration instruments. Measurement Science and Technology, 31 (4). 042002 ISSN 0957-0233

Coveney, T; Matus, M; Wang, S; Byman, V; Lassila, A; Alqahtani, N; Alqahtani, F; Sumner, D; Spiller, J; Meli, F; Picotto, G B; Bellotti, R; Sato, O; Sharma, R; Moona, G; Kumar, V; Rodríguez, J; Prieto, E; Meral, İ; Ganioğlu, O; Salgado, J; Wójtowicz, A; Skalník, P; Zelený, V; Stoup, J; Kotte, G; Koops, R; Arizmendi, E; Wang, W; Jakobsson, A; Duta, A; Dugheanu, E; Reain, G; Szikszai, G (2020) Calibration of 1-D CMM artefacts: step gauges (EURAMET.L-K5.2016). Metrologia, 57 (1A). 04002 ISSN 0026-1394

Cox, M G; Cross, N R; Flack, D R; Forbes, A B; Peggs, G N (1997) Measurement of artefacts using repositioning methods. NPL Report. CLM 2

Cox, M G; Forbes, A B; Peggs, G N (1997) CMM verification and grading. NPL Report. CLM 1

Cui, Z*; Leach, R K; Lewis, A; Singleton, L* (2003) Standardisation for microsystems technology: the way forward. In: Proceedings of the 8th International Conference on the Commercialization of Micro and Nano Systems: COMS 2003, 8-11 September 2003, Amsterdam.

D

Dale, J*; Hughes, E B; Lancaster, A J*; Lewis, A J; Reichold, A J H*; Warden, M S (2014) Multi-channel absolute distance measurement system with sub ppm-accuracy and 20 m range using frequency scanning interferometry and gas absorption cells. Opt. Express, 22 (20). pp. 24869-24893.

Davies, R*; London, J*; Leach, R K; Turner, N (2000) 'Measurement matters' consistent and accurate measurement for the clothing industry. In: IFFTI 3rd Annual Conference Fashion Directions: Visioning the Future, 8-9 November 2000, London College of Fashion.

Decker, J E*; Lewis, A J; Cox, M G; Steele, A G*; Douglas, R J* (2006) Evaluating results of international comparisons: worked example of CCL-K2 comparison of long gauge block calibration. In: IMEKO World Congress 2006, September 2006, Rio de Janeiro.

Decker, J E*; Lewis, A J; Cox, M G; Steele, A G*; Douglas, R J* (2010) A recommended method for evaluation of international comparison results. Measurement, 43 (6). pp. 852-856.

Discetti, S; Peters, K; Yacoot, A (2021) Announcing the 2020 Measurement Science and Technology outstanding paper awards. Measurement Science and Technology, 32 (11). 110101

Downes, S P (2001) Interim report on the fabrication and characterisation of the surface of silicon artefacts used in the Avogadro project. NPL Report. CMAM 64

Downs, M J (1998) Realisation of the optimum performance from length-measuring interferometers by atmospheric refractometry. Proc. SPIE - Int. Soc. Opt. Eng., 3477. pp. 46-53.

Downs, M J; Forbes, A B; Siddle, J E (1998) The verification of a high precision two dimensional position measurement system. In: Applied Optics and Optoelectronics 1998, 16-19 March 1998, Brighton, UK.

Doytchinov, I; Tonnellier, X; Shore, P; Nicquevert, B; Modena, M; Mainaud Durand, H (2018) Application of probabilistic modelling for the uncertainty evaluation of alignment measurements of large accelerator magnets assemblies. Measurement Science and Technology, 29 (5). 054001 ISSN 0957-0233

Doytchinov, I.; Shore, P.; Nicquevert, B.; Tonnellier, X.; Heather, A.; Modena, M. (2019) Thermal effects compensation and associated uncertainty for large magnet assembly precision alignment. Precision Engineering, 59. pp. 134-149. ISSN 01416359

de Podesta, M; May, E F*; Mehl, J B*; Pitre, L*; Gavioso, R M; Benedetto, G*; Giuliano Albo, P A*; Truong, D*; Flack, D (2010) Characterization of the volume and shape of quasi-spherical resonators using coordinate measurement machines. Metrologia, 47 (5). pp. 588-604.

E

Eichstadt, S*; Wilkens, V*; Dienstfrey, A*; Hale, P*; Hughes, B; Jarvis, C* (2016) On challenges in the uncertainty evaluation for time-dependent measurements. Metrologia, 53 (4). S125-S135

Evans, A A*; Macdonald, D A*; Giusca, C L; Leach, R K (2014) New method development in prehistoric stone tool research: evaluating use duration and data analysis protocols. Micron, 65. pp. 69-75.

F

Ferrucci, M; Ametova, E*; Carmignato, S*; DeWulf, W* (2016) Evaluating the effects of detector angular misalignments on simulated computed tomography data. Precision Eng., 45. pp. 230-241.

Ferrucci, M; Heřmánek, P; Ametova, E; Carmignato, S; Dewulf, W (2018) Measurement of the X-ray computed tomography instrument geometry by minimization of reprojection errors—Implementation on simulated data. Precision Engineering, 54. pp. 7-20. ISSN 01416359

Ferrucci, M; Leach, R K; Giusca, C L; Carmignato, S*; Dewulf, W* (2015) Towards geometrical calibration of X-ray computed tomography systems - a review. Meas. Sci. Technol., 26 (9). 092003

Fiala, P; Gohler, D; Wessely, B; Stintz, M; Lazzerini, G M; Yacoot, A (2017) Evaluation of preparation methods for suspended nano objects on substrates for dimensional measurements by atomic force microscopy. Beilstein Journal of Nanotechnology, 8. pp. 1774-1785.

Flack, D (2014) CMM measurement strategies. Measurement Good Practice Guide. 41

Flack, D (2014) CMM probing. Measurement Good Practice Guide. 43

Flack, D (2011) CMM verification. Measurement Good Practice Guide. 42

Flack, D (2014) Callipers and micrometers. Measurement Good Practice Guide. 40

Flack, D R (2013) Co-ordinate measuring machine task-specific measurement uncertainties. Measurement Good Practice Guide. 130

Flack, D R (2000) Small angle generator final traceability report. NPL Report. CBTLM 3

Flack, D R; Bevan, K* (2005) Fundamental good practice guide in the design and interpretation of engineering drawings for measurement processes. Measurement Good Practice Guide. 79

Flack, D R; Hannaford, J (2006) Fundamental good practice in dimensional metrology. Measurement Good Practice Guide. 80

Flay, N; Brown, S; Sun, W; Blumensath, T; Su, R (2020) Effects of off-focal radiation on dimensional measurements in industrial cone-beam micro-focus X-ray computed tomography systems. Precision Engineering, 66. pp. 472-481. ISSN 01416359

Flay, N; Leach, R K (2012) Application of the optical transfer function in x-ray computed tomography - a review. NPL Report. ENG 41

Forbes, A B (2012) Weighting observations from multi-sensor coordinate measuring systems. Meas. Sci. Technol., 23 (2). 025004

Forbes, A B; Harris, P M; Leach, R K (2003) The comparison of algorithm for the assessment of Type A1 surface texture reference artefacts. NPL Report. CMSC 33/03

Forbes, A B; Leach, R K (2009) Reducing the effects of measurement noise when determining surface texture parameters. In: 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia.

Forbes, A B; Leach, R K (2005) Self-calibration of a novel surface texture measuring instrument. In: Laser Mapping and Machine Performance VII (LAMDAMAP 2005), 25-27 June 2005, Cranfield University, UK.

Forbes, A B; Leach, R K; Brill, N* (2004) The Abbe principle, self-calibration and the design of co-ordinate measuring systems. In: 4th euspen International Conference, 31 May 2004 - 2 June 2004, Glasgow, UK.

Forbes, A B; Peggs, G N (1997) A large reference artefact for CMM verification. In: Laser Metrology and Machine performance III. UNSPECIFIED, pp. 393-400.

Foreman, M R; Giusca, C L; Coupland, J M*; Török, P*; Leach, R K (2013) Determination of the transfer function for optical surface topography measuring instruments - a review. Meas. Sci. Technol., 24 (5). 052001

Foreman, M R; Giusca, C L; Leach, R K; Coupland, J M* (2012) Determination of the transfer function for optical surface topography measuring instruments. NPL Report. ENG 36

Foreman, M R; Giusca, C L; Torok, P*; Leach, R K (2013) Phase-retrieved pupil function and coherent transfer function in confocal microscopy. J. Microsc., 251 (1). pp. 99-107.

Franks, A; Jackson, K; Yacoot, A (2000) A parabolic mirror x-ray collimator. Meas. Sci. Technol., 11. pp. 484-488.

Franks, A; Luty, M; Robbie, C J; Stedman, M (1998) A design study of a microthrust balance for space applications. Nanotechnology, 9 (2). pp. 61-66.

G

Gao, F*; Petzing, J N*; Coupland, J M*; Leach, R K (2007) Measurement of structured surfaces using stylus AFM and optical methods. In: 7th International Conference and 9th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 17-20 July 2007, Huddersfield, UK.

Garnæs, J; Nečas, D; Nielsen, L; H Madsen, M; Torras-Rosell, A; Zeng, G; Klapetek, P; Yacoot, A (2020) Algorithms for using silicon steps for scanning probe microscope evaluation. Metrologia, 57 (6). 064002 ISSN 0026-1394

Geckeler, R D; Just, A; Vasilev, V; Prieto, E; Dvorácek, F; Zelenika, S; Przybylska, J; Duta, A; Victorov, I; Pisani, M; Saraiva, F; Salgado, J A; Gao, S; Anusorn, T; Tan, S L; Cox, P; Watanabe, T; Lewis, A; Chaudhary, K P; Thalmann, R; Banreti, E; Nurul, A; Fira, R; Yandayan, T; Chekirda, K; Bergmans, R; Lassila, A (2018) Angle comparison using an autocollimator. Metrologia, 55 (1A). 04001 ISSN 0026-1394

Geo, F*; Leach, R K; Petzing, J*; Coupland, J M* (2008) Surface measurement errors using commercial scanning white light interferometers. Meas. Sci. Technol., 19 (1). 015303

Giusca, C L; Claverley, J D; Sun, W J; Leach, R K; Helmli, F*; Chavigner, M P J* (2014) Practical estimation of measurement noise and flatness deviation on focus variation microscopes. CIRP Ann. - Manuf. Technol., 63 (1). pp. 545-548.

Giusca, C L; Evans, A A*; McDonald, D*; Leach, R K (2012) The effect of use duration on surface roughness measurements of stone tool. NPL Report. ENG 35

Giusca, C L; Forbes, A B; Leach, R K (2009) Comparison between GUM, Monte Carlo and bayesian uncertainty evaluation approaches for an areal surface texture measuring instrument. In: 14th International Congress of Metrology, 22-25 June 2009, Paris.

Giusca, C L; Forbes, A B; Leach, R K (2009) Uncertainty evaluation for a new traceable areal surface texture measuring instrument. In: 12th International Conference on Metrology and Properties of Engineering Surfaces, 8-10 July 2009, Rzeszów, Poland.

Giusca, C L; Leach, R K (2013) Calibration of the metrological characteristics of Coherence Scanning Interferometers (CSI) and Phase Shifting Interferometers (PSI). Measurement Good Practice Guide. 127

Giusca, C L; Leach, R K (2013) Calibration of the metrological characteristics of Imaging Confocal Microscopes (ICMs). Measurement Good Practice Guide. 128

Giusca, C L; Leach, R K (2013) Calibration of the metrological characteristics of contact stylus instruments. Measurement Good Practice Guide. 129

Giusca, C L; Leach, R K (2013) Calibration of the scales of areal surface topography measuring instruments: Part 3 Resolution. Meas. Sci. Technol., 24 (10). 105010

Giusca, C L; Leach, R K; Forbes, A B (2011) A virtual machine-based uncertainty evaluation for a traceable areal surface texture measuring instrument. Measurement, 44 (5). pp. 988-993.

Giusca, C L; Leach, R K; Helery, F* (2012) Calibration of the scales of areal surface topography measuring instruments: Part 2 Amplification, linearity and squarness. Meas. Sci. Technol., 23 (6). 065005

Giusca, C L; Leach, R K; Helery, F*; Gutauskas, T* (2011) Calibration of the geometrical characteristics of areal surface texture measuring instruments. In: 13th International Conference on Metrology and Properties of Engineering Surfaces., 12-15 April 2011, Twickenham Stadium, UK.

Giusca, C L; Leach, R K; Helery, F*; Gutauskas, T* (2011) Calibration of the geometrical characteristics of areal surface topography measuring instruments. J. Phys., Conf. Ser., 311. 012005

Giusca, C L; Leach, R K; Helery, F*; Gutauskas, T*; Nimishakavi, L (2012) Calibration of the scales of areal surface topography measuring instruments: Part 1 Measurement noise and residual flatness. Meas. Sci. Technol., 23 (3). 035008

Giusca, C L; Smith, I M (2013) Areal lateral calibration software: user manual. NPL Report. ENG 45

Godden, T M*; Muniz-Piniella, A; Claverley, J D; Yacoot, A; Humphry, M J* (2016) A phase calibration target for quantitative phase imaging with ptychography. Opt. Express, 24 (7). pp. 7679-7692.

H

Hall, S R G; Cashmore, M T; Blackburn, J; Koutsourakis, G*; Gottschalg, R* (2016) Compressive current response mapping of photovoltaic devices using MEMS mirror arrays. IEEE Trans. Instrum. Meas., 65 (8). pp. 1945-1950.

Hansen, P-E*; Roebben, G*; Babick, F*; Boyd, R; Braun, A*; Busch, I*; Danzebrink, H-U*; Depero, L*; Dirscherl, K*; Dziomba, T*; Eriksson, E*; Franks, K*; Gee, M G; Jennett, N M; Kestens, V*; Koenders, L*; Krumrey, M*; Lausmaa, J*; Leach, R K; Pendrill, L*; Pidduck, A*; Put, S*; Roy, D; Stintz, M*; Turan, R*; Yacoot, A (2010) Introductory guide to nanometrology. Technical Report. European Commission.

Harris, P M; Smith, I M; Leach, R K; Giusca, C; Jiang, X*; Scott, P* (2012) Software measurement standards for areal surface texture parameters: Part I - algorithms. Meas. Sci. Technol., 23 (10). 105008

Harris, P M; Smith, I M; Wang, C*; Giusca, C; Leach, R K (2012) Software measurement standards for areal surface texture parameters: Part II - comparison of software. Meas. Sci. Technol., 23 (10). 105009

Hart, A; Haycocks, J; Jackson, K; Law, A; Leach, R K (2002) Measurement of surface texture in CBTLM: a three-year review of instrument capabilities. NPL Report. CBTLM 21

Hart, A; Leach, R K (2001) Review of methods for cleaning surfaces prior to surface texture measurement as part of project LE9953, milestone 5.3.1.4. NPL Report. CBTLM 12

Haycocks, J (2005) Surface certainty (3D surface measurement). Metalwork. Prod., 149 (7). p. 31.

Haycocks, J; Jackson, K (2005) Traceable calibration of transfer standards for scanning probe microscopy. Precision Engineering, 29. pp. 168-175.

Haycocks, J; Jackson, K; Leach, R K; Garratt, J*; McDonnell, I*; Rubert, P*; Lamb, J*; Wheeler, S* (2005) Tackling the challenge of traceable surface texture measurement in three dimensions. In: 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 8-11 May 2005, Montpellier, France.

Haycocks, J; Jackson, K; Robbie, C J; Stedman, M (1997) Traceable metrology for scanning probe microscopes. In: Proc. 2nd Seminar on Quantitive Microscopy, November 1997, PTB, Germany.

He, B*; Petzing, J N*; Webb, D P*; Conway, P P*; Leach, R K (2012) The assessment of areal surface texture parameters for characterizing the adhesive bond strength of copper plated micro-machined glass. In: 12th euspen International Conference, 4-8 June 2012, Stockholm, Sweden.

He, B*; Petzing, J*; Webb, P*; Conway, P*; Leach, R K (2012) The use of areal surface texture parameters to characterize the mechanical bond strength of copper on glass plating applications. NPL Report. ENG 34

He, B*; Webb, D P*; Petzing, J*; Leach, R K (2011) Improving plated copper adhesion for metallisation of glass PCBs. In: International Conference on Electronic Packaging Technology and High Density packageing 2011 (ICEPT-HDP2011), 8-11 August 2011, Shanghai, China.

Heaps, E; Yacoot, A; Dongmo, H; Picco, L; Payton, O D; Russell-Pavier, F; Klapetek, P (2020) Bringing real-time traceability to high-speed atomic force microscopy. Measurement Science and Technology, 31 (7). 074005 ISSN 0957-0233

Henning, A J; Giusca, C; Forbes, A B; Smith, I; Leach, R K; Coupland, J*; Mandal, R* (2013) Correction for lateral distortion in coherence scanning interferometry. CIRP Ann. - Manuf. Technol., 62. pp. 547-550.

Henning, A J; Giusca, C L (2017) Considerations on the proposed linear theory of surface measurement for coherence scanning interferometers. Appl. Opt., 56 (10). pp. 2960-2967.

Henning, A J; Giusca, C L (2015) Errors and uncertainty in the topography gained via frequency-domain analysis. Opt. Express, 23 (18). pp. 24057-24070.

Henning, A J; Huntley, J M*; Giusca, C L (2015) Obtaining the transfer function of optical instruments using large calibrated reference objects. Opt. Express, 23 (13). pp. 16617-16627.

Hiersemenzel, F*; Petzing, J N*; Leach, R K; Helmli, F S*; Singh, J* (2012) Areal texture and angle measurement of tilted surface using focus variation methods. In: International Conference on Surface Metrology (ICSM'2012), 21-23 March 2012, Annecy, France.

Hiersemenzel, F*; Singh, J*; Petzing, J N*; Claverley, J D; Leach, R K; Helmli, F* (2013) Development of a traceable performance verification route for optical micro-CMMs. In: Laser Metrology and Machine Performance X (LAMDAMAP 2013), 20-21 March 2013, Chichley, UK.

Hiersemenzel. F*,, ; Claverley, J D; Singh, J*; Petzing, J N*; Helmli, F*; Leach, R K (2013) ISO compliant reference artefacts for the verification of focus variation-based optical micro-coordinate measuring machines. In: Proceedings of the 13th euspen International Conference, 27-31 May 2013, Berlin, Germany.

Hiersmenzel, F*; Singh, J*; Petzing, J N*; Leach, R K; Helmli, F*; Danzl, R* (2012) The assessment of residual flatness errors in focus variation areal measuring instruments. In: 12th euspen International Conference, 4-8 June 2012, Stockholm, Sweden.

Hou, P; Besenhard, M O; Halbert, G; Naftaly, M; Markl, D (2023) Development and implementation of a pneumatic micro-feeder for poorly-flowing solid pharmaceutical materials. International Journal of Pharmaceutics, 635. 122691

Hughes, B; Campbell, M A; Lewis, A J; Lazzerini, G M; Kay, N (2017) Development of a high-accuracy multi-sensor, multi-target coordinate metrology system using frequency scanning interferometry and multilateration. Proceedings of SPIE, 10332. 1033202

Hughes, B; Forbes, A B; Nasr, K; Sun, W J; Veal, D (2011) Validation of the network method for determination of laser tracker alignment errors: NIMTech deliverable 3.7. NPL Report. ENG 30

Hughes, B; Forbes, A B; Sun, W J (2011) Good practice for deployment and use of iGPS/iSPACE: NIMTech deliverable 3.1(2). NPL Report. ENG 31

Hughes, B; Forbes, A B; Sun, W J (2011) Procedure for calibration of laser tracker alignment errors using a network measurement: NIMTech deliverable 3.1(1). NPL Report. ENG 29

Hughes, E B; Ferrucci, M; Forbes, A B (2015) Preliminary investigation into the use of a network-based technique for calibration of 3D laser scanners. NPL Report. ENG 59

Hughes, E B; Forbes, A B; Lewis, A; Sun, W; Veal, D; Nasr, K (2011) Laser tracker error determination using a network measurement. Meas. Sci. Technol., 22 (4). 045103

Hughes, E B; Muelaner, J*; Martin, O* (2010) ViewNet reference network survey. NPL Report. ENG 22

Hughes, E B; Oldfield, S (2004) Thrust balance for ground testing of electric thrusters. In: 4th euspen International Conference, May 2004, Glasgow, UK.

Hughes, E B; Sun, W; Forbes, A B; Lewis, A (2010) Determining laser tracker alignment errors using a network measurement. J. CMSC, 5 (2). pp. 26-32.

J

Jones, C W; Chetwynd, D*; Singh, J*; Leach, R K (2011) Concept and modelling of a novel active triskelion low force transfer artefact. In: 11th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2011), 23-27 May 2011, Lake Como, Italy.

Jones, C W; Davidson, S; Kramer, J A*; Leach, R K; Pratt, J R* (2008) Comparison of NIST SI force scale to NPL SI mass scale. In: ASPE 2008 Annual Meeting, 19-24 October 2008, Portland, Oregon.

Jones, C W; Leach, R K (2008) Adding a dynamic aspect to amplitude-wavelength space. Meas. Sci. Technol., 19 (5). 055105

Jones, C W; Leach, R K (2008) Amplitude-wavelength space in three dimensions. In: 12th International Colloquium on Surfaces, 28-29 January 2008, Chemnitz, Germany.

Jones, C W; Leach, R K (2008) Review of low force transfer artefact technologies. NPL Report. ENG 5

Jones, C W; O'Connor, D (2018) A hybrid 2D/3D inspection concept with smart routing optimisation for high throughput, high dynamic range and traceable critical dimension metrology. Measurement Science and Technology, 29 (7). 074004

Jones, C W; Sun, W J; Boulter, H; Brown, S (2022) 3D roughness standard for performance verification of topography instruments for additively-manufactured surface inspection. Measurement Science and Technology, 33 (8). 084003

Joung, W; Park, J; Pearce, J V (2018) Determination of the liquidus temperature of tin using the heat pulse-based melting and comparison with traditional methods. Metrologia, 55 (3). pp. 334-349.

Jusko, O*; Bosse, H*; Flack, D; Hemming, B*; Pisani, M*; Thalmann, R* (2012) A comparison of sensitivity standards in form metrology - final results of the EURAMET project 649. Meas. Sci. Technol., 23 (5). 054006

K

Kautt, M*; Anson, S M*; Saile, V*; Scholz, S*; Fugier, P*; Lambertini, V*; Abad, E*; Dirne, F*; Loeschner, H*; Leach, R K (2009) Facilitating open innovation in micro and nano technology by providing open access to a pan-European toolbox called EUMINAfab. In: 4M/ICOMM 2009 Conference, 23-25 September 2009, Forschungszentrum Karlruhe, Germany.

Klapetek, P; Yacoot, A; Hortvík, V; Duchoň, V; Dongmo, H; Řeřucha, Š; Valtr, M; Nečas, D (2020) Multiple-fibre interferometry setup for probe sample interaction measurements in atomic force microscopy. Measurement Science and Technology, 31 (9). 094001 ISSN 0957-0233

Klapetek, P*; Nacas, D*; Campbellova, A*; Yacoot, A; Koenders, L* (2011) Methods for determining and processing 3D errors and uncertainties for AFM data analysis. Meas. Sci. Technol., 22 (2). 025501

Klapetek, P*; Picco, L*; Payton, O*; Yacoot, A; Miles, M* (2013) Error mapping of high-speed AFM systems. Meas. Sci. Technol., 24 (2). 025006

Klapetek, P*; Valtr, M*; Picco, L*; Payton, O D*; Martinek, J*; Yacoot, A; Miles, M* (2015) Large area high-speed metrology SPM system. Nanotechnology, 26 (6). 065501

L

Lancaster, A; Dury, M (2017) Measurement of the surface texture of large roller bearings. Measurement Good Practice Guide. 148

Lancaster, A J; O'Connor, D (2022) Traceable spectral interferometry for length measurement. Metrologia, 59 (2). 024004

Law, A; Leach, R K (2001) Use of a polymer film bridge to measure the contact force applied by instruments used in the measurement of surface textures. NPL Report. CBTLM 14

Lazzerini, G M; Paterno, G M*; Tregnago, G*; Treat, N*; Stingelin, N*; Yacoot, A; Cacialli, F* (2016) Traceable atomic force microscopy of high-quality solvent-free crystals of [6,6]-phenyl-C 61-butyric acid methyl ester. Appl. Phys. Lett., 108 (5). 053303

Leach, R K (1999) Calibration, traceability and uncertainty issues in surface texture metrology. NPL Report. CLM 7

Leach, R K (2001) Current problems in the field of surface texture measurement. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Leach, R K (2010) Engineering the surface to affect its function. Measurement and Control, 43 (9). pp. 278-279.

Leach, R K (1998) Measurement of a correction for the phase change on reflection due to surface roughness. Proc. SPIE - Int. Soc. Opt. Eng., 3477. pp. 138-151.

Leach, R K (2008) Metrology for micro- and nanotechnology: some perspectives on requirements. Micro Manufacturing, 08 (08). pp. 18-21.

Leach, R K (2009) Metrology for nanotechnology. Qual. Manufact. Today (Septem). pp. 28-29.

Leach, R K (2002) Miniature machine plugs metrology gap. Phys. World, 15 (6). pp. 27-28.

Leach, R K (2004) Some issues of traceability in the field of surface topography measurement. In: Proceedings of the 9th International Conference on Metrology and Properties of Engineering Surfaces, April 2004, Sweden.

Leach, R K (2004) Some issues of traceability in the field of surface topography measurement. Wear, 257. pp. 1246-1249.

Leach, R K (2002) Surface texture - stylus v optical? Qual. Today (Januar). S18-S20

Leach, R K (2004) Surface texture metrology: more than just skin deep. Eng. Technol. (March). pp. 42-43.

Leach, R K (2000) Telling the rough from the smooth. Mater. World (Februa). pp. 18-19.

Leach, R K (2013) Thinking outside the Bento Box: NPL develops a new set of calibration artefacts for areal surface topography measurement. Qual. Manufact. Today (Nov/De). pp. 20-23.

Leach, R K (2002) Traceable measurements of surface texture in the optics industry. Proc. SPIE - Int. Soc. Opt. Eng., 4411. pp. 177-183.

Leach, R K (2002) The importance of metrology and standardisation for micro-systems technology. In: 7th International Conference on Commercialisation of Micro and Nano Systems, 8-12 September 2002, Michigan, USA.

Leach, R K (2009) The measurement and characterisation of three dimensional surface texture - a bright future for advanced manufacturing. Qual. Manufact. Today (Jan - ). pp. 37-38.

Leach, R K (2009) The measurement and characterisation of three dimensional surface texture - a bright future for advanced manufacturing. MST News (1). pp. 8-9.

Leach, R K (2014) The measurement of surface texture using stylus instruments. Measurement Good Practice Guide. 37

Leach, R K (1995) A novel 3-axis CMM probe calibration facility. NPL Report. MOM 126

Leach, R K (2001) A recent comparison of stylus and optical methods for measuring surface texture. In: 9th IMEKO Symposium Metrology for Quality Control in Production; Surface Metrology for Quality Assurance., 24-27 September 2001, Cairo, Egypt.

Leach, R K; Bennett, I* (2004) Characterisation of a new vertical scanning white light interferometer - a test case? In: 11th International Colloquium on Surfaces, 2-3 February 2004, Chemnitz, Germany.

Leach, R K; Blunt, L*; Chetwynd, D G*; Yacoot, A (2001) The need for a metrology infrastructure to support nanotechnology. In: Proceedings of the 5th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII), 25-29 September 2001, Cairo, Egypt.

Leach, R K; Boyd, R; Burke, T*; Danzebrink, H-U*; Dirscherl, K*; Dziomba, T*; Gee, M G; Koenders, L*; Morazzani, V*; Pidduck, A*; Roy, D; Unger, W E S*; Yacoot, A (2011) The European nanometrology landscape. Nanotechnology, 22. 062001

Leach, R K; Brown, L*; Jiang, X*; Blunt, R*; Conroy, M*; Mauger, D* (2008) Guide to the measurement of smooth surface topography using coherence scanning interferometry. Measurement Good Practice Guide. 108

Leach, R K; Claverley, J D; Giusca, C; Jones, C W; Nimishakavi, L P; Sun, W; Tedaldi, M; Yacoot, A (2012) Advances in engineering nanometrology at the National Physical Laboratory. Meas. Sci. Technol., 23 (7). 074002

Leach, R K; Coupland, J*; Mandal, R*; Giusca, C; Foreman, M* (2012) Calibration of areal surface topography measuring instruments: are we there yet? In: 27th Annual Meeting of the American Society for Precision Engineering., 21-26 October 2012, San Diego, CA, USA.

Leach, R K; Cross, N R (2002) Low-cost traceable dynamic calibration of surface texture measuring instruments. Meas. Sci. Technol., 13. N1-N4.

Leach, R K; Cui, Z*; Flack, D R (2003) Microsystems technology standardisation roadmap. Technical Report. NPL, UK.

Leach, R K; Cui, Z*; Lewis, A; Singleton, L* (2004) Standardisation of microsystems technology: completion of the MEMSTAND project. MST News, 1 (Februa). pp. 39-41.

Leach, R K; Evans, C*; He, L*; Davies, A*; Duparre, A*; Henning, A J; Jones, C W; O'Connor, D (2015) Open questions in surface topography measurement: a roadmap. Surf. Topogr.: Metrol. Prop., 3 (1). 013001

Leach, R K; Flack, D R; Hughes, E B; Jones, C W (2007) Development of a new traceable areal surface texture measuring instrument. In: 11th International Conference on Metrology & Properties of Engineering Surfaces., 17-20 July 2007, Huddersfield, UK.

Leach, R K; Flack, D R; Hughes, E B; Jones, C W (2009) Development of a new traceable areal surface texture measuring instrument. Wear, 266. pp. 552-554.

Leach, R K; Garbutt, I; Cox, M G (2001) Sinusoidally modulated reference artefacts for calibration of surface texture measuring instruments. In: Proceedings of 2nd European Society for Precision Engineering and Nanotechnology (Euspen) International Conference, 27-31 May 2001, Turin, Italy.

Leach, R K; Garbutt, I; Harris, P; Cox, M G (2001) Production, measurement and analysis of sinusoidal artefacts for calibration of surface texture measuring instruments. NPL Report. CBTLM 7

Leach, R K; Giusca, C (2009) Results from a comparison of optical thin film thickness measurement. NPL Report. ENG 18

Leach, R K; Giusca, C (2008) Traceable measurement of areal surface texture. In: Proceedings of the 4th International Conference on Multi-Material Micro Manufacture (4M 2008), 9-11 September 2008, Cardiff, UK.

Leach, R K; Giusca, C; Guttmann, M*; Jakobs, P J*; Rubert, P* (2015) Development of low-cost material measures for calibration of the metrological characteristics of areal surface texture instruments. CIRP Ann. - Manuf. Technol., 64 (1). pp. 545-548.

Leach, R K; Giusca, C; Naoi, K* (2009) Traceability for areal surface texture measurement. In: 9th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2009), 29 June - 2 July 2009, Saint-Petersburg, Russia.

Leach, R K; Giusca, C; Naoi, K* (2010) Traceability for areal surface texture measurement. Key Eng. Mater., 437. pp. 121-125.

Leach, R K; Giusca, C; Rickens, K*; Riemer, O*; Rubert, P* (2014) Development of material measures for performance verifying surface topography measuring instruments. Surf. Topogr.: Metrol. Prop., 2 (2). 025002

Leach, R K; Giusca, C L (2012) Determination of the metrological characteristics of optical areal surface topography measuring instruments. Proc. SPIE - Int. Soc. Opt. Eng., 8430. 84300Q

Leach, R K; Giusca, C L; Coupland, J M* (2012) Advances in calibration methods for micro- and nanoscale surfaces. Proc. SPIE - Int. Soc. Opt. Eng., 8430. 84300H

Leach, R K; Giusca, C L; Henning, A; Sherlock, B; Coupland, J* (2014) ISO definition of resolution for surface topography measuring instruments. In: Fringe 2013 - 7th International Workshop on Advanced Optical Imaging and Metrology. Springer, pp. 405-410. ISBN 9783642363580

Leach, R K; Giusca, C L; Naoi, K* (2009) Development and characterisation of a new instrument for the traceable measurement of areal surface texture. Meas. Sci. Technol., 20 (12). 125102

Leach, R K; Giusca, C L; Rubert, P* (2013) A single set of material measures for the calibration of areal surface topography measuring instruments: the NPL Areal Bento Box. In: Metrology and Properties of Engineering Surfaces, 2013: Proceedings of the 14th International Conference (14th MPES), 17-21 June 2013, Taipei, Taiwan.

Leach, R K; Giusca, C*; Naoi, K* (2009) A traceability infrastructure for three-dimensional surface measurements at the National Physical Laboratory. In: Proceedings of the 9th euspen International Conference, 2-5 June 2009, San Sebastian, Spain.

Leach, R K; Haitjema, H* (2010) Bandwidth characteristics and comparisons of surface texture measuring instruments. Meas. Sci. Technol., 21 (3). 032001

Leach, R K; Harris, P M (2002) Ambiguities in the definition of spacing parameters for surface texture characterisation. Meas. Sci. Technol., 13. pp. 1924-1930.

Leach, R K; Harris, P M (2006) Softgauges for surface texture. Qual. Today (March). pp. 12-14.

Leach, R K; Harris, P M (2004) Uncertain about surfaces? [surface texture measurement]. Qual. Today (Februa). pp. 24-25.

Leach, R K; Harris, P M; Smith, I; Giusca, C L; Jiang, X*; Scott, P* (2013) Software measurement standards for areal surface texture parameters. In: Metrology and Properties of Engineering Surfaces, 2013: Proceedings of the 14th International Conference (14th MPES)., 17-21 June 2013, Taipei, Taiwan.

Leach, R K; Hart, A (2000) EUROMET Project 413: inter-laboratory comparison of measurements of the phase correction in the field of guage block interforometry. Metrologia, 37. pp. 261-267.

Leach, R K; Hart, A (2001) Investigation into the shape of diamond styli used for surface texture measurement. NPL Report. CBTLM 10

Leach, R K; Hart, A (2002) A comparison of stylus and optical methods for measuring 2D surface textures. NPL Report. CBTLM 15

Leach, R K; Hart, A; Jackson, K (1999) Measurement of gauge blocks by interferometry: an investigation into the variability in wringing film thickness. NPL Report. CLM 3

Leach, R K; Jackson, K; Hart, A (1997) Design of two systems to measure the phase change at reflection and one system to measure the variability in contact error due to wringing. NPL Report. MOT 10

Leach, R K; Jackson, K; Hart, A (1997) Measurement of gauge blocks by interferometry: measurement of the phase change at reflection. NPL Report. MOT 11

Leach, R K; Jones, C W; Sherlock, B; Krysinski, A* (2013) Metrology challenges for highly parallel micro-manufacture. In: 4M 2013 - Proceedings of the 10th International Conference on Multi-Material Micro Manufacture., 8-10 October 2013, San Sebastian, Spain.

Leach, R K; Jones, C W; Sherlock, B; Krysinski, A* (2013) The high dynamic range surface metrology challenge. In: 28th Annual Meeting of the American Society for Precision Engineering., 20-25 October 2013, St. Paul, Minnesota, USA.

Leach, R K; Lewis, A; Singleton, L*; Cui, Z* (2003) Towards a standardisation roadmap for micro-systems technology: review of the MEMSTAND survey. In: Proceedings of euspen "Transferring Micro-systems Technology though the Commercial Markets"., 14-15 April 2003, NPL,UK.

Leach, R K; Li, T*; Jiang, X*; Blunt, L*; Giusca, C (2010) Comparison of commercial software packages for calculating surface texture parameters. In: 10th International Conference of the European Society for Precision Engineering & Nanotechnology (euspen), 31 May - 4 June 2010, Delft, Netherlands.

Leach, R K; Murphy, J (2004) The design of co-ordinate measuring probe for characterising truly three-dimensional micro-structures. In: 4th euspen International Conference, 31 May 2004 - 2 June 2004, Glasgow, UK.

Leach, R K; Murphy, J; Wilson, A (2004) Design of a co-ordinate measuring probing system for characterising three-dimensional micro-structures. NPL Report. CBTLM 30

Leach, R K; Oldfield, S; Awan, S A; Blackburn, J; Williams, J M (2004) Design of a bi-directional electrostatic actuator for realising nanonewton to micronewton forces. NPL Report. DEPC-EM 001

Leach, R K; Weckenmann, A*; Coupland, J*; Hartmann, W* (2014) Interpreting the probe-surface interaction of surface measuring instruments, or what is a surface? Surf. Topogr.: Metrol. Prop., 2 (3). 035001

Leach, R K*; Giusca, C L; Haitjema, H*; Evans, C*; Jiang, X* (2015) Calibration and verification of areal surface texture measuring instruments. CIRP Ann. - Manuf. Technol., 64 (2). pp. 797-813.

Lee-Bennett, I*; Leach, R K (2004) Metrology for microsystems - characterisation of a new broadband interferometer. In: 4th euspen International Conference, 31 May 2004 - 2 June 2004, Glasgow, UK.

Leonard, F*; Brown, S B; Withers, P J*; Mummery, P M*; McCarthy, M B (2014) A new method of performance verification for x-ray computed tomography measurements. Meas. Sci. Technol., 25 (6). 065401

Lewis, A (1994) Measurement of length, surface form and thermal expansion coefficient of length bars up to 1.5 m using multiple-wavelength phase-stepping interferometry. Meas. Sci. Technol., 5. 694 - 703

Lewis, A (2008) Uncertainty budget for the NPL-UCL swing arm profilometer operating in comparator mode. NPL Report. ENG 9

Lewis, A; Lillepea, L; Matus, M; Prieto, E; Ačko, B; Hansen, M S; Turner, P; Testa, N; Daoud, A; Montassar, C; Švedova, L; Hald, J; Gaidamovičiūtė, L; Bajic, G (2017) Supplementary comparison EURAMET.L-S22, calibration of gauge blocks by mechanical comparison. Metrologia, 54 (1A). 04002 ISSN 0026-1394

Lewis, A; Oldfield, S; Callender, M*; Efstathiou, A*; Gee, A*; King, C*; Walker, D* (2006) Arcuate arm profilometry - traceable metrology for large mirrors. In: Symposium of Metrology 2006, 25-27 October 2006, Mexico.

Lewis, A J (2006) Final report on EUROMET key comparison EUROMET.L-K2: calibration of long gauge blocks. Metrologia, 43 (Tech. ). 04003.

Lewis, A J (2003) Key comparison CCL-K2 - measurement of long gauge blocks - final report. Metrologia, 40 (Tech. ). 04004.

Lewis, A J (2003) A fully traceable miniature CMM with sub-micrometre uncertainty. Proc. SPIE - Int. Soc. Opt. Eng., 5190. pp. 265-276.

Lewis, A J; Campbell, M; Stavroulakis, P (2016) Performance evaluation of a cheap, open source, digital environmental monitor based on the Raspberry Pi. Measurement, 87. pp. 228-235.

Lewis, A J; Hughes, E B; Aldred, P J E* (2010) Long term study of gauge block interferometer performance and gauge blocks stability. Metrologia, 47 (4). pp. 473-486.

Lewis, A J; Yacoot, A (2023) Editorial for the Metrologia Focus Issue on Length Metrology. Metrologia, 60 (1). 010301

Lewis, A J; Yacoot, A; Milton, M J T; Lancaster, A J (2022) A digital framework for realising the SI – a proposal for the metre. Metrologia, 59 (4). 044004

Li, F; Hart, Dan; Fatadin, I; Ferguson, R; Guilizzoni, R; Harmon, S (2020) Characterisation of an Optical 2D Tracking System. In: 2019 IEEE 2nd British and Irish Conference on Optics and Photonics, 11-13 December 2019, London, UK.

Li, T*; Leach, R K; Jiang, X*; Blunt, L A* (2009) Comparison of type F2 software measurement standards for surface texture. NPL Report. ENG 16

Li, Z; Brand, U; Wolff, H; Koenders, L; Yacoot, A; Puranto, P (2017) Broadband interferometric characterisation of nano-positioning stages with sub-10 pm resolution. Proceedings of SPIE, 10329. 1032944

Liu, W; Chen, X; Zeng, W; Sun, W; Jiang, X; Scott, P; Lou, S (2021) FVM and XCT Measurement of Surface Texture of Additively Manufactured Parts. In: 2021 26th International Conference on Automation and Computing (ICAC), 02-04 September 2023, Portsmouth, UK.

Lobera, J*; Gao, F*; Coupland, J*; Leach, R K (2008) Limitations and innovations in scanning white light interferometry. In: euspen 2008, 18-22 May 2008, Zurich.

Lohvithee, M; Sun, W; Chretien, S; Soleimani, M (2021) Ant Colony-Based Hyperparameter Optimisation in Total Variation Reconstruction in X-ray Computed Tomography. Sensors, 21 (2). 591 ISSN 1424-8220

Lou, S.; Brown, S.B.; Sun, W.; Zeng, W.; Jiang, X.; Scott, P.J. (2019) An investigation of the mechanical filtering effect of tactile CMM in the measurement of additively manufactured parts. Measurement, 144. pp. 173-182. ISSN 02632241

Lou, S.; Jiang, X.; Sun, W.; Zeng, W.; Pagani, L.; Scott, P.J. (2019) Characterisation methods for powder bed fusion processed surface topography. Precision Engineering, 57. pp. 1-15. ISSN 01416359

M

MacAulay, G D*; Senin, N*; Giusca, C L; Leach, R K (2014) Comparison of segmentation techniques to determine the geometric parameters of structured surfaces. Surf. Topogr.: Metrol. Prop., 2 (4). 044004

MacAulay, G D*; Senin, N*; Giusca, C L; Leach, R K; Ivanov, A* (2015) Review of feature boundary identification techniques for the characterization of tessellated surfaces. Surf. Topogr.: Metrol. Prop., 3 (1). 013002

Macaulay, G D; Giusca, C L (2016) Assessment of uncertainty in structured surfaces using metrological characteristics,. CIRP Ann., 65 (1). pp. 533-536.

Macaulay, G D; Senin, N*; Giusca, C L; Leach, R K (2016) Study of manufacturing and measurement reproducibility on a laser textured structured surface. Measurement, 94. pp. 942-948.

Mandal, R*; Coupland, J*; Leach, R K; Mansfield, D* (2014) Coherence scanning interferometry: measurement and correction of three-dimensional transfer and point-spread characteristics. Appl. Opt., 53 (8). pp. 1554-1563.

Mandal, R*; Palodhi, K*; Coupland, J*; Leach, R K; Mansfield, D* (2012) Application of linear systems theory to characterize coherence scanning interferometry. Proc. SPIE - Int. Soc. Opt. Eng., 3430. 84600T

Mandal, R*; Palodhi, K*; Coupland, J*; Leach, R K; Mansfields, D* (2011) Measurement of the point spread function in coherence scanning interferometry. In: Proceedings of the International Conference on Trends in Optics and Photonics II, 7-9 December 2011, Kolkata, India.

Marson, S*; Attia, U M*; Lucchetta, G*; Wilson, A; Alcock, J R*; Allen, D M* (2011) Flatness optimization of micro-injection moulded parts: the case of a PMMA microfludic component. J. Micromechan. Microeng., 21 (11). 115024

Martinez, J J*; Campbell, M A*; Warden, M S; Hughes, E B; Copner, N J*; Lewis, A J (2015) Duel-sweep frequency scanning interferometry using four wave mixing. IEEE Photonics Technol. Lett., 27 (7). pp. 733-736.

Marwaha, N; Bevan, K (2016) Strategic planning for coordinate metrology. Measurement Good Practice Guide. 138

Matus, M*; Piree, H*; Gavalyugov, V*; Tamakyarska, D*; Thalmann, R*; Balling, P*; Garnaes, J*; Hald, J*; Farid, N*; Prieto, E*; Lassila, A*; Salgado, J*; Lewis, A; Bandis, C*; Mudronja, V*; Banreti, E*; Balsamo, A*; Bergmans, R*; Karlsson, H*; Ramotowski, Z*; Saraiva, F*; Eusebio, L*; Duta, A*; Zelenika, S*; Bergstrand, S*; Fira, R*; Yandayan, T*; Sendogdu, D*; Akgoz, S A*; Ganioglu, O*; Haas, S*; Franke, P* (2016) Measurement of gauge blocks by interferometry. Metrologia, 53 (1A). 04003.

McCarthy, M B; Brown, S B; Evenden, A; Robinson, A D (2011) NPL freeform artefact for verification of non-contact measuring systems. Proc. SPIE - Int. Soc. Opt. Eng., 7864. 78640K

McCarthy, M B; Nunn, J W; Rodger, G N (1997) NPL optical length scales in the range 300nm to 400nm. In: Proc. Landamap 97, 16 July 1997, Huddersfield.

McKee, C*; Culshaw, B*; Leach, R (2017) Laser ultrasound measurement of diaphragm thickness, Young's modulus and Poisson's ratio in an MEMS device. IEEE J. Sel. Top. Quantum Electron., 23 (2). 2700108

McKee, C*; Culshaw, B*; Leach, R K (2012) Thickness measurement of silicon MEMS pressure sensor membrane using laser generated ultrasound. In: 12th euspen International Conference, 4-8 June 2012, Stockholm, Sweden.

McPolin, C P T*; Olivier, N*; Bouillard, J S*; O'Connor, D; Krasavin, A V*; Dickson, W*; Wurtz, G A*; Zayats, A V* (2017) Universal switching of plasmonic signals using optical resonator modes. Light-Science Applications, 6. e16237

Meyer, P*; Claverley, J D; Kaiser, K*; Mohr, J*; Leach, R K (2011) Comparison of dimensional measurements of microparts made using deep x-ray lithography (LIGA): first results. In: 11th International Conference of the European Society for Prescision Engineering and Nanotechnology (euspen 2011), 23-27 May 2011, Lake Como, Italy.

Meyer, P*; Claverley, J D; Leach, R K (2012) Quality control for deep x-ray lithography (LIGA): a preliminary metrology study. Microsyst. Technol., 18 (4). pp. 415-421.

Mikheikin, A; Olsen, A; Leslie, K; Russell-Pavier, F; Yacoot, A; Picco, L; Payton, O; Toor, A; Chesney, A; Gimzewski, J K; Mishra, B; Reed, J (2017) DNA nanomapping using CRISPR-Cas9 as a programmable nanoparticle. Nature Communications, 8. 1665

Miller, A.; Mulholland, A.J.; Tant, K.M.M.; Pierce, S.G.; Hughes, B.; Forbes, A.B. (2021) Reconstruction of refractive index maps using photogrammetry. Inverse Problems in Science and Engineering, 29 (13). pp. 2696-2718. ISSN 1741-5977

Moschetti, G; Forbes, A B; Leach, R K*; Jiang, X*; O'Connor, D (2016) Phase and fringe order determination in wavelength scanning interferometry. Opt. Express, 24 (8). pp. 8997-9012.

Moschetti, G; Forbes, A B; Leach, R K*; Jiang, X*; O'Connor, D (2016) Quadrature wavelength scanning interferometry. Appl. Opt., 55 (20). pp. 5332-5340.

Muelaner, J*; Wadsworth, W*; Azini, M*; Mullineux, G*; Hughes, B; Reichold, A* (2017) Absolute multilateration between spheres. Meas. Sci. Technol., 28 (4). 045005

Muralikrishnan, B*; Lee, V*; Blackburn, C*; Sawyer, D*; Phillips, S*; Ren, W*; Hughes, E B (2013) Assessing ranging errors as a function of azimuth in laser trackers and tracers. Meas. Sci. Technol., 24 (6). 065201

N

Nasr, K M; Hughes, B; Forbes, A B; Lewis, A (2014) Determination of laser tracker angle encoder errors. In: UNSPECIFIED.

Necas, D; Yacoot, A; Valtr, M; Klapetek, P (2023) Demystifying data evaluation in the measurement of periodic structures. Measurement Science and Technology, 34 (5). 055015

Nimishakavi, L P; Giusca, C L; Leach, R K; Blanchon, B* (2012) Measurement and characterization of the areal surface texture of crankshafts for optimizing the process variables during manufacture. In: International Conference on Surface Metrology (ICSM'2012), 21-23 March 2012, Annecy, France.

Nimishakavi, L P; Giusca, C L; Leach, R K; Blanchon, B* (2012) The use of areal surface texture parameters for determining machining parameters in precision grinding. NPL Report. ENG 33

O

O'Connor, D; Evans, A; Balsamo, A; Favre, G; Przyklenk, A; Bosse, H; Phillips, D (2023) European Metrology Network (EMN) for Advanced Manufacturing ─ Development of the Strategic Research Agenda (SRA). In: euspen's 23rd International Conference & Exhibition, 12-16 June 2023, Copenhagan, Denmark.

O'Connor, D; Henning, A J; Sherlock, B; Leach, R K; Coupland, J*; Giusca, C L (2015) Model-based defect detection on structured surfaces having optically unresolved features. Appl. Opt., 54 (30). pp. 8872-8877.

Otrio, G; Forbes, A B; Hughes, B; Peggs, G (2017) Large-scale dimensional measurement in the space environment using multi-lateration techniques. Proceedings of the SPIE, 10569. 1056907

P

Palodhi, K*; Coupland, J M*; Leach, R K (2011) Determination of the point spread function of a coherence scanning interferometer. In: 13th International Conference on Metrology and Properties of Engineering Surfaces., 12-15 April 2011, Twickenham Stadium, UK.

Palodhi, K*; Coupland, J M*; Leach, R K (2011) Measurement of complex refractive index using microellipsometry and its relevance to surface measurement using coherence scanning interferometry. In: 13th International Conference on Metrology and Properties of Engineering Surfaces., 12-15 April 2011, Twickenham Stadium, UK.

Palodhi, K*; Coupland, J*; Leach, R K (2011) Absolute surface topography measurement of composite structures using coherence scanning interferometry. In: 11th International Conference of the European Society for Precision Engineering and Nanotechnology (euspen 2011), 23-27 May 2011, Lake Como, Italy.

Parker, A (2000) Optical fibre coating thickness and geometry - report on a feasibility study of traceability issues associated with different measurement techniques. NPL Report. CBTLM 5

Peggs, G N (2003) Virtual technologies for advanced manufacturing and metrology. Int. J. Comput. Integr. Manfu., 16 (7-8). pp. 485-490.

Peggs, G N; Lewis, A; Leach, R K (2003) Measuring in three dimensions at the mesoscopic level. In: Proceedings of the ASPE Winter Topical Meeting - Machines and Processes for Micro-scale and Meso-scale Fabrication, Metrology and Assembly., January 2003, Florida, USA.

Peggs, G N; Lewis, A J; Leach, R K (2004) Measuring the metrology gap: three dimensional metrology at the mesoscopic level. J. Manuf. Process., 6 (1). pp. 117-124.

Peggs, G N; Lewis, A J; Oldfield, S (1999) Design for a compact high accuracy CMM. Ann. CIRP, 48 (1). pp. 417-420.

Peggs, G N*; Maropoulos, P G*; Hughes, E B; Forbes, A B; Robson, S*; Ziebart, M*; Muralikrishnan, B* (2009) Recent developments in large scale metrology. Proc. Inst. Mech. Eng. B, J. Eng. Manuf., 223 (6). pp. 571-595.

Petzing, J*; Coupland, J*; Leach, R K (2010) The measurement of rough surface topography using coherence scanning interferometry. Measurement Good Practice Guide. 116

Pfeifer, T; Montavon, B; Peterek, M; Hughes, B (2019) Artifact-free coordinate registration of heterogeneous Large-Scale Metrology systems. CIRP Annals, 68 (1). pp. 503-506. ISSN 00078506

Pisani, M*; Yacoot, A; Balling, P*; Bancone, N*; Birlikseven, C*; Celik, M*; Flügge, J*; Hamid, R*; Köchert, P*; Kren, P*; Kuetgens, U*; Lassila, A*; Picotto, G B*; Sahin, E*; Seppa, J*; Tedaldi, M; Weichert, C* (2012) Comparison of the performance of the next generation of optical interferometers. Metrologia, 49 (4). pp. 455-467.

Przyklenk, A; Balsamo, A; O'Connor, D; Evans, A; Yandayan, T; Akgoz, S A; Flys, O; Phillips, D; Zeleny, V; Czulek, D; Meli, F; Ragusa, C S; Bosse, H (2021) New European Metrology Network for advanced manufacturing. Measurement Science and Technology, 32 (11). 111001

Q

Quabis, S*; Schulz, M*; Ehret, G*; Asar, M*; Balling, P*; Kren, P*; Bergmans, R H*; Kung, A*; Lassila, A*; Putland, D; Williams, D; Piree, H*; Prieto, E*; Perez, M*; Svedova, L*; Ramotowski, Z*; Vannoni, M*; Hungwe, F*; Kang, Y* (2017) Intercomparison of flatness measurement of an optical flat at apertures of up to 150 mm in diameter. Metrologia, 54 (1). pp. 85-93.

R

Raine, K; Parker, A (1998) Measurement of two dimensional axial stress profiles of optical fibres with high spatial resolution. NIST Special Publication, 930. pp. 57-60.

Rajaguru, P*; Stoyanov, S*; Tang, Y K*; Bailey, C*; Claverley, J; Leach, R K; Topham, D* (2010) Numerical modelling methodology for design of miniaturised integrated products - an application to 3D CMM micro-probe development. In: 11th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiements in Microelectronics and Microsystems (EuroSimE 2010)., 26-28 April 2010, Bordeaux, France.

Reilly, S P; Leach, R K (2006) Critical review of seismic vibration isolation techniques. NPL Report. DEPC-EM 007

Reilly, S P; Leach, R K; Cuenat, A; Awan, S A; Lowe, M (2006) Overview of MEMS sensors and the metrology requirements for their manufacture. NMS Programme for Engineering Measurement 2005-2008. NPL Report. DEPC-EM 008

Rerucha, S*; Yacoot, A; Pham, T M*; Cizek, M*; Hucl, V*; Lazar, J*; Cip, O* (2017) Laser source for dimensional metrology: investigation of an iodine stabilized system based on narrow linewidth 633 nm DBR diode. Meas. Sci. Technol., 28 (4). 045204

Robinson, A D; Leach, R K (2008) Overview of tomography techniques to measure wafer thickness in MEMS structures. NPL Report. ENG 8

Rodger, G N; Flack, D R; McCarthy, M B (2007) A review of industrial capabilities to measure free-form surfaces. NPL Report. DEPC-EM 014

Rossides, C; Towsyfyan, H; Biguri, A; Deyhle, H; Lindroos, R; Mavrogordato, M; Boardman, R; Sun, W; Blumensath, T (2022) Effects of fast x-ray cone-beam tomographic measurement on dimensional metrology. Metrologia, 59 (4). 044003

Russell-Pavier, F S; Picco, L; Day, J C C; Shatil, N R; Yacoot, A; Payton, O D (2018) ‘Hi-Fi AFM’: high-speed contact mode atomic force microscopy with optical pickups. Measurement Science and Technology, 29 (10). 105902 ISSN 0957-0233

S

Salgado, J; Duta, A; Lewis, A; Gunn, D; Picotto, G B; Borovsky, J; Nanits, M M; Mudronja, V; Castellanos, C C; Kornbilt, F; Renegar, B; de Souza, M M (2017) Calibration of surface roughness standards. Metrologia, 54 (1A). 04005 ISSN 0026-1394

Sanz, C; Gerard, R; Morantz, P; Chérif, A; Shore, P; Mainaud-Durand, H; Lunt, A J G (2018) Micro-scale finishing of the surface and form of a Ti-6Al-4V lightweight rotor obtained by laser powder bed fusion used for air bearing. Additive Manufacturing, 23. pp. 287-293. ISSN 22148604

Sanz, C; Giusca, C; Morantz, P; Marin, A; Chérif, A; Schneider, J; Mainaud-Durand, H; Shore, P; Steffens, N (2018) Form measurement of a 0.1 mm diameter wire with a chromatic confocal sensor, with associated uncertainty evaluation. Measurement Science and Technology, 29 (7). 074010 ISSN 0957-0233

Saunders, P*; Wilson, A; Orchard, N*; Tatman, N*; Maropoulos, P* (2014) An exploration into measurement consistency on coordinate measuring. Procedia CIRP, 25. pp. 19-26.

Schmitt, R H*; Peterek, M*; Morse, E*; Knapp, W*; Hartig, F*; Goch, G*; Hughes, B; Forbes, A B; Estler, W T* (2016) Advances in large-scale metrology - review and future trends. CIRP Ann. - Manuf. Technol., 65 (2). pp. 643-665.

Schodel, R; Yacoot, A; Lewis, A (2021) The new mise en pratique for the metre-a review of approaches for the practical realization of traceable length metrology from 10(-11) m to 10(13) m. Metrologia, 58 (5). 052002

Seah, M P; Spencer, S J; Bensebaa, F*; Vickridge, I*; Danzebrink, H*; Krumrey, M*; Gross, T*; Oesterle, W*; Wendler, E*; Rheinlander, B*; Azuma, Y*; Kojima, I*; Suzuki, N*; Suzuki, M*; Tanuma, S*; Moon, D W*; Lee, H J*; Hyun Mo Cho*,, ; Chen, H Y*; Wee, A T S*; Osipowicz, T*; Pan, J S*; Jordaan, W A*; Hauert, R*; Klotz, U*; van der Marel, C*; Verheijen, M*; Tamminga, Y*; Jeynes, C*; Baily, P*; Biswas, S*; Falke, U*; Nguyen, N V*; Chandler-Horowitz, D*; Ehrstein, J R*; Muller, D*; Dura, J A* (2004) Critical review of the current status of thickness measurements for ultrathin SiO2 on Si Part V: results of a CCQM pilot study. Surf. Interface Anal., 36 (9). pp. 1269-1303.

Senin, N*; Blunt, L A*; Leach, R K; Pini, S* (2013) Morphologic segmentation algorithms for extracting individual surface features from areal surface topography maps. Surf. Topogr.: Metrol. Prop., 1 (1). 015005

Senin, N*; MacAulay, G*; Giusca, C L; Leach, R K (2014) On the characterisation of periodic patterns in tessellated surfaces. Surf. Topogr.: Metrol. Prop., 2 (2). 025005

Sheu, D Y*; Claverley, J D; Leach, R K (2014) Testing the mechanical characteristics and contacting behavior of novel manufactured and assembled sphere-tipped styli for micro-CMM probes. IFIP Advances in Information and Communication Technology, 435. pp. 15-21.

Singleton, L*; Leach, R K; Cui, Z* (2003) Analysis of the MEMSTAND survey on standardisation for microsystems technology. In: Proceedings of the International Seminar MEMSTAND - "Standardisation for Microsystems: the Way Forward"., 24-26 February 2003, Barcelona, Spain.

Smale, D*; Haley, S*; Segal, J*; Ronaldo, R*; Ratchev, S*; Leach, R K; Claverley, J D (2010) Utilisation of FIB/SEM technology in the assembly of an innovative micro-CMM probe. In: 5th International Precision Assembly Seminar (IPAS 2010), February 2010, Chamonix, France.

Smale, D*; Ratchev, S*; Segal, J*; Leach, R K; Claverley, J D (2009) Assembly of the stem and tip of an innovative micro-CMM probe. In: 9th International Conference and Exhibition on Laser Meterology, Machine Tool, CMM and Robotic Performance (LAMDAMAP 2009), 2009.

Smith, I M; Harris, P M (2011) Reference software for calculating areal surface texture parameters: User manual. NPL Report. MS 14

Stedman, M; Franks, A (1995) The UK national surface texture measuring facility. In: 125th International Seminar on Quantitative Microscopy, October 1995, Brunswick, Germany.

Stedman, M; Franks, A; Luty, M (1996) Measurement of the microthrust of the field emission electric propulsion unit. In: Proc. 2nd European spacecraft propulsion conference, 1996.

Stoyanov, S*; Bailey, C*; Leach, R K; Hughes, B; Wilson, A; O'Neill, W*; Dorey, R A*; Shaw, C*; Underhill, D*; Almond, H J* (2008) Modelling and prototyping the conceptual design of 3D CMM micro-probe. In: 2nd Electronics Systemintegration Technology Conference, 2008, Greenwich, UK.

Stoyanov, S*; Rajagura, P*; Tang, Y K*; Bailey, C*; Claverley, J; Leach, R K (2010) Reduced order modelling for risk mitigation in design of miniaturised/integrated products. In: 33rd International Spring Seminar on Electronics Technology, 12-16 May 2010, Warsaw, Poland.

Sun, U*; Folkes, C*; Gindy, G*, Leach (2010) Variation risk analysis: MEMS fabrication tolerance for a micro CMM probe. Int. J. Adv. Manufact. Technol., 47 (9-12). pp. 1113-1320.

Sun, W; Brown, S B; Flay, N; McCarthy, M B; McBride, J* (2016) A reference sample for investigating the stability of the imaging system of x-ray computed tomography. Meas. Sci. Technol., 27 (8). 085004

Sun, W; Brown, S B; Leach, R K (2012) An overview of industrial X-ray computed tomography. NPL Report. ENG 32

Sun, W; Chen, X; Giusca, C; Lou, S; Jones, C W; Boulter, H; Brown, S (2022) Evaluation of X-ray computed tomography for surface texture measurements using a prototype additively manufactured reference standard. In: 11th Conference on Industrial Computed Tomography (iCT 2022), 08-11 February 2022, Wels, Austria.

Sun, W; Chretien, S; Biguri, A; Soleimani, M; Blumensath, T; Talbot, J (2023) The realisation of fast X-ray computed tomography using a limited number of projection images for dimensional metrology. NDT & E International, 137. 102852

Sun, W; Giusca, C; Lancaster, A (2017) Surface texture measurements of gear surfaces using stylus instruments. Measurement Good Practice Guide. 147

Sun, W; Leach, R K (2010) Advanced optical techniques for the measurement of the internal geometry of MEMS structures. Proc. SPIE - Int. Soc. Opt. Eng., 7544. pp. 754461-1.

Sun, W; Leach, R K (2010) Measurement of the internal geometry of MEMS structures. NPL Report. ENG 24

Sun, W J; Claverley, J D (2015) Verification of an optical micro-CMM using the focus variation technique: aspects of probing errors. CIRP Ann. - Manuf. Technol., 64 (1). pp. 511-514.

Sun, W J; Giusca, C; Lou, S; Yang, X Y; Chen, X; Fry, T; Jiang, X Q; Wilson, A; Brown, S; Boulter, H (2022) Establishment of X-ray computed tomography traceability for additively manufactured surface texture evaluation. Additive Manufacturing, 50. 102558

Sun, W J; Symes, D R; Brenner, C M; Bohnel, M; Brown, S; Mavrogordato, M N; Sinclair, I; Salmon, M (2022) Review of high energy x-ray computed tomography for non-destructive dimensional metrology of large metallic advanced manufactured components. Reports on Progress in Physics, 85 (1). 016102

Sun, X Z; Heaps, E; Yacoot, A; Yang, Q P; Grolich, P; Klapetek, P (2021) Three-dimensional drift correction of scan data from atomic force microscopy using Lissajous scanning paths. Measurement Science and Technology, 32 (11). 115010

T

Tan, J B*; Wang, C*; Wang, Y*; Wang, W B*; Liu, J*; Leach, R K; Hao, L (2014) Long working distance microscope with a low obscuration aspherical Schwarzschild objective. Opt. Lett., 39 (23). pp. 6699-6702.

Tantau, M; Morantz, P; Shore, P (2001) Position sensor for active magnetic bearing with commercial linear optical encoders. CIRP Annals, 70 (1). pp. 419-422.

Triantaphyllou, A*; Giusca, C L; Macaulay, G D; Roerig, F*; Hoebel, M*; Leach, R K*; Tomita, B*; Milne, K A* (2015) Surface texture measurement for additive manufacturing. Surf. Topogr.: Metrol. Prop., 3 (2). 024002

V

Virdee, M (1995) Non-contacing straightness measurement to nanometre accuracy. Int. J. Mach. Tools Manufact., 35 (2). 157 -164

Virdee, M (1993) A new approach for establishing a reference plane for absolute measurement of shape and flatness with nanometre precision. NPL Report. MOM 114

W

Wang, J; Leach, R K; Jiang, X* (2014) Advances in sampling techniques for surface topography measurement - a review. NPL Report. ENG 55

Wang, J; Leach, R K; Jiang, X* (2014) Review of data fusion for surface topography measurement. NPL Report. ENG 54

Wang, J*; Jiang, X Q*; Gurdak, E; Scott, P*; Leach, R K; Tomlins, P; Blunt, L* (2011) Numerical characterisation of biomedical titanium surface texture using novel feature parameters. Wear, 271 (7-8). pp. 1059-1065.

Wang, J*; Jiang, X*; Blunt, L A*; Leach, R K; Scott, P J* (2011) Efficiency of adaptive sampling in surface texture measurement for structured surfaces. IOP Conf. Ser., 311. 012017

Wang, J*; Jiang, X*; Blunt, L A*; Leach, R K; Scott, P J* (2011) Efficiency of adaptive sampling in surface texture measurement for structured surfaces. In: 13th International Conference on Metrology and Properties of Engineering Surfaces., 12-15 April 2011, Twickenham Stadium, UK.

Wang, J*; Jiang, X*; Blunt, L A*; Leach, R K; Scott, P J* (2012) Intelligent sampling for the measurement of structured surfaces. Meas. Sci. Technol., 23 (8). 085006

Wang, J*; Jiang, X*; Blunt, L A*; Leach, R K; Scott, P J* (2012) A boundary segmentation algorithm for extracting micro-scale dimensional parameters in the measurement of structured surfaces. In: 12th euspen International Conference, 4-8 June 2012, Stockholm, Sweden.

Warden, M S (2014) Precision of frequency scanning interferometry distance measurements in the presence of noise. Appl. Opt., 53 (25). pp. 5800-5806.

Weichert, C*; Köchert, P*; Köning, R*; Flügge, J*; Andreas, B*; Kuetgens, U*; Yacoot, A (2012) A heterodyne interferometer with nonlinearities smaller than ±10 pm. Meas. Sci. Technol., 23 (9). 094005

Wen, J; Li, K; Gong, Y; Copner, B; Hughes, B; Campbell, M A; Lazzaini, M; Duan, L; Ma, C; Fan, W; Jia, Z; Fu, H; Copner, N (2020) Numerical investigation of on-chip wavelength conversion based on InP/In1−xGaxAsyP1−y semiconductor waveguide platforms. Optics Communications, 473. 125921 ISSN 00304018

Wilson, A; Leach, R K (2009) Manufacturing and testing of a micro-stylus suitable for tactile probing in dimensional metrology. NPL Report. ENG 15

Y

Yacoot, A (2022) 1923–2022: Measurement Science and Technology completes a century of publishing. Measurement Science and Technology, 33 (12). 120201

Yacoot, A (2024) Measurement Science and Technology’s second century underway. Measurement Science and Technology, 31 (1). 010201

Yacoot, A; Bosse, H; Dixson, R (2020) The lattice parameter of silicon: a secondary realisation of the metre. Measurement Science and Technology, 31 (12). 121001 ISSN 0957-0233

Yacoot, A; Cross, N R (2003) Measurement of picometre non-linearity in an optical grating encoder using x-ray interferometry. Meas. Sci. Technol., 14. pp. 148-152.

Yacoot, A; Downes, M*; Flügge, J* (2005) Interferometric length measurement. MAPAN, J. Metrol. Soc. India, 20 (2). pp. 99-114.

Yacoot, A; Downs, M J (2000) The use of x-ray interferometry to investigate the linearity of the NPL differential plane mirror optical interferometer. Meas. Sci. Technol., 11. pp. 1126-1130.

Yacoot, A; Klapetek, P; Valtr, M; Grolich, P; Dongmo, H; Lazzerini, M G; Bridges, A (2019) Design and performance of a test rig for evaluation of nanopositioning stages. Measurement Science and Technology, 30 (3). 035002 ISSN 0957-0233

Yacoot, A; Koenders, L* (2008) Aspects of scanning force microscope (SFM) cantilevers and tips and their effects on dimensional measurement. J. Phys. D, Appl. Phys., 41 (10). 103001

Yacoot, A; Koenders, L* (2003) From nanometre to millimetre: a feasibility study of the combination of scanning probe microscopy and combined optical and X-ray interferometry. Meas. Sci. Technol., 14 (9). N59-N63

Yacoot, A; Koenders, L* (2011) Recent developments in dimensional metrology using AFMs. Meas. Sci. Technol., 22 (12). 122001

Yacoot, A; Kuetgens, U* (2012) Sub-atomic dimensional metrology: developments in the control of x-ray interferometers. Meas. Sci. Technol., 23 (7). 074003

Yacoot, A; Kuetgens, U*; Koenders, L*; Weimann, T* (2001) A combined scanning tunnelling microscope and x-ray interferometer. Meas. Sci. Technol., 12. pp. 1660-1665.

Yacoot, A; Leach, R K (2007) Review of x-ray and optical thin film measurement methods and transfer artefacts. NPL Report. DEPC-EM 013

Yacoot, A; Leach, R K; Hughes, B; Giusca, C; Jones, C W; Wilson, A (2009) Dimensional nanometrology at The National Physical Laboratory. Proc. SPIE - Int. Soc. Opt. Eng., 7133. pp. 713345-1.

Yang, T*; Henning, A J; Benedict, K A* (2014) Vortex interactions in the collision of Bose-Einstein condensates. Laser Phys., 24 (11). 115502

Yang, X; Sun, W; Giusca, C (2022) An automated surface determination approach for computed tomography. NDT & E International, 131. 102697