< back to main site

Publications

Items where Subject is "Engineering Measurements > Mass, Force, Pressure"

Up a level
Export as [feed] RSS
Group by: Authors | Item Type
Jump to: A | B | C | D | E | G | H | I | J | K | L | M | N | P | R | S | U | W | Z
Number of items at this level: 176.

A

Abbott, P J*; Becerra, L O*; Borys, M*; Davidson, S; Jacques, C*; Lee, S*; Loayza, V*; Malengo, A*; Nieves Medina, M* (2015) Final report of CCM key comparison of mass standards CCM.M-K6, 50g. Metrologia, 52 (1A). 07004.

Alisic, S; Gutfeldt, B; Beaudoux, F; Bezjak, M; Coenegrachts, M; Davidson, S; Grgić, G; Hanrahan, R; van Geel, J L W A; Kacmaz, S; Mangutova-Stoilkovska, B; Miteva, M; Navrozidis, G; Neuvonen, P T; Nielsen, L; Ojanen-Saloranta, M; Pantić, D; Pärn, A; Popa, G F; Snopko, L; Spohr, I; Conceição, P; Stock, M; Vámossy, Cs; Wüthrich, C; Žandarova, T; Zelenka, Z; Zůda, J; AlQarni, S M (2020) Final report on EURAMET comparison on 1 kg stainless steel mass standards. Metrologia, 57 (1A). 07011 ISSN 0026-1394

Altıntaş, A; Koçaş, I; Durgut, Y; Bartolo, J; Bergoglio, M; Bermanec, L G; Bošnjaković, A; Burzić, S; Condereys, A; Dobre, M; Farar, P; Hetherington, P; Medina, N; Sabuga, W; Ott, O; Konczak, T; Sandu, I; Setina, J; Steindl, D; Vámossy, C; Waller, B; Wuethrich, C; Brzozowski, A; van Geel, J; Saxholm, S; Arrhén, F (2020) Final report on key comparison EURAMET.M.P-K1.c in the range 0.7 MPa to 7.0 MPa of gas gauge pressure. Metrologia, 57 (1A). -07022. 07022 ISSN 0026-1394

Armitage, D (1998) Mass & Weight. Technical Report. NPL, Teddington.

B

Barat, P*; Berry, J J; Borys, M*; Davidson, S; Fehling, T*; Fuchs, P*; Malengo, A*; Meury, P-A*; Silvestri, Z* (2013) Report detailing requirements of NMIs for storage and transfer equipment compatible with existing apparatus. (EMRP SIB-05 Work Package 4 Deliverable 4.1.1). NPL Report. ENG 43

Bayliss, D J (2002) Measurement of the volume of a Zerodur sphere of nominal mass 1 kg by comparison hydrostatic weighing with Zerodur and silica standards of similar nominal mass. NPL Report. CMAM 80

Bayliss, D J; Downes, S (1999) The modification and re-assessmant of the NPL 1kg solid density apparatus. NPL Report. CMAM 28

Bayliss, D J; Downes, S P (2003) An evaluation of a Paar 5000 density meter. NPL Report. MATC(A)139

Bayliss, D J; Severn, I (2002) The traceability of density measurements via solid density reference standards using the NPL 1 kg hydrostatic weighing apparatus. NPL Report. CMAM 66

Becerra, L O*; Borys, M*; Jin Wan Chung*,, ; Davidson, S; Fuchs, P*; Jacques, C*; Wang Jian*,, ; Kubarych, Z J*; Kumar, A*; Malengo, A*; Fen, K*; Medina, N*; Meury, P-A*; Mizushima, S*; Picard, A*; Steyn, R*; Zelenka, Z* (2014) Final report on CCM.M-K4: key comparison of 1 kg stainless steel mass standards. Metrologia, 51 (1A). 07009.

Berry, J; Davidson, S; Brown, S (2007) The development of artefacts for the gravimetric measurement of the density of moist air. NPL Report. ENG 1

Berry, J; Davidson, S; Burrows, A*; Chapman, A*; Coben-Gipps, L*; Goddard, P*; Jenkins, C*; Pain, J*; Parkinson, M*; Taylor, A* (2008) UK comparison of 1 kg magnetic stainless steel weights. NPL Report. ENG 6

Berry, J; Downes, S P (2006) An investigation into the effect of marking mass standards of OIML class E1. NPL Report. DEPC-EM 002

Berry, J; Lovelock, P; Robinson, I A; Urquhart, J (2022) Vibrational analysis for the next generation NPL Kibble balance. In: IMEKO 24th TC3, 14th TC5, 6th TC16 and 5th TC22 International Conference, 11-13 October 2022, Cavtat-Dubrovnik, Croatia.

Berry, J; Webster, E; Robinson, I (2018) NPL Kibble balance bifilar coil design and evaluation. XXII IMEKO World Congress, Belfast, 3 - 6 September 2018. Journal of Physics: Conference Series, 1065. 042049 ISSN 1742-6588

Berry, J J (2014) A method to enable on-demand preparation of controlled contaminated samples for evaluation of cleaning techniques (EMRP SIB-05 Work Package 4. Deliverable 4.2.2). NPL Report. ENG 48

Berry, J J; Bentouati, D*; Borys, M*; Högström, H*; Kaçmaz, S*; Malengo, A*; Marti, K*; Mecke, M*; Silvestri, Z*; Snopko, L*; Zuda, J* (2015) A comparison between seven National Measurement Institutes to evaluate inert gas transfer of mass standards against current best practice. NPL Report. ENG 61

Berry, J J; Borys, M*; Davidson, S; Firlus, M*; Fuchs, P*; Kacmaz, S*; Malengo, A*; Medina, N*; Meury, P-A*; Picard, A* (2013) Report on the CCM WG TG1 pilot comparison to measure water vapour sorption on stainless steel mass standards. NPL Report. ENG 46

Berry, J J; Borys, M*; Firlus, M*; Green, R*; Malengo, A*; Mecke, M*; Meury, P-A*; Zuda, J* (2014) EMRP SIB-05 work package 2. deliverable 2.2.2. analysis of the correlation of sorption coefficients to pressure. NPL Report. ENG 50

Berry, J J; Borys, M*; Mecke, M*; Silvestri, Z* (2015) Report on the evaluation of medium-term (6-month) storage in nitrogen compared with storage in air (EMRP SIB-05 Work Package 4 Deliverable 4.3.3). NPL Report. ENG 60

Berry, J J; Davidson, S (2008) Contamination deposited on mass standards in vacuum from a Penning ionisation gauge. Meas. Sci. Technol., 19 (11). 115102

Berry, J J; Davidson, S (2014) Effect of pressure on the sorption correction to stainless steel, platinum/iridium and silicon mass artefacts. Metrologia, 51 (2). S107-S113

Berry, J J; Davidson, S (2011) Evaluation of equipment and procedures for the transfer and storage of mass standards in inert gas. Metrologia, 48 (5). pp. 391-398.

Berry, J J; Davidson, S; Barat, P*; Davis, R* (2011) Comparison of UV/ozone cleaning of platinum/iridium kilogram mass standards with nettoyage-lavage cleaning. Metrologia, 48 (3). pp. 181-186.

Berry, J J; Davidson, S; Downes, S; Hogstrom, R*; Silvestri, Z* (2016) An evaluation of potential materials for the handling and support of mass standards in vacuum/inert gas apparatus. NPL Report. ENG 63

Berry, J J; Downes, S; Davidson, S (2010) UV/ozone cleaning of platinum/iridium kilogram mass prototypes. Metrologia, 47 (4). pp. 410-418.

Bettin, H; Borys, M; Firlus, M; Buchner, C; Zelenka, Z; Medina, N; Parlić-Risović, T; Bezjak, M; Mitsas, C; Lefkopoulos, A; Lenard, E; Popa, G F; Malengo, A; Madec, T; Beaudoux, F; Fuchs, P; Marti, K; Wüthrich, C; Kajastie, H; Eltawil, A A; Fujii, K; Kuramoto, N; Waseda, A; Perkin, M; Davidson, S; Açadağ, Ü Y; Domostroev, A (2020) EURAMET key comparison 1031 (EURAMET.M.D-K1.1)—solid density comparison. Metrologia, 57 (1A). 07028 ISSN 0026-1394

Blues, J*; Bayliss, D J; Buckley, M* (2004) The calibration and use of piston pipettes. Measurement Good Practice Guide. 69

Brice, L (2006) Determination of sensitivity coefficients for Rockwell hardness scales HR15N, HR30N and HRA. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Brice, L; Davis, F; Crawshaw, A H (2003) Uncertainty in hardness measurement. NPL Report. CMAM 87

Buchner, C*; Zelenka, Z*; Wolf, H*; Vamossy, C*; Lorefice, S*; Lenard, E*; Spohr, I*; Mares, G*; Perkin, M; Parlic-Risovic, T*; Grue, L L*; Tammik, K*; van Andel, L* (2016) Comparison of density determination of liquid samples by density meters. Metrologia, 53 (1A). 07006.

C

Carroll, P A; Mari, D*; Greenwood, J C; Raiteri, G*; Rumiano, G* (2007) Calibration of two spinning rotor gauges as a bilateral comparison between NPL and INRIM in the range 3 · 10-4 Pa to 9 · 10-2 Pa. NPL Report. DEPC-EM 015

Choi, I-M*; Robinson, I A; Woo, S-Y* (2008) An analysis of the mechanical characteristics of the knife edges used in the NPL watt balance. J. Korean Soc. Prec. Eng., 25 (4). pp. 61-68.

Clow, P (1994) Elastic distortion calculations at NPL on LNE 200 MPa pressure balances as part of EUROMET Project 256. NPL Report. MOM 120

Clow, P (1994) Elastic distortion calculations at NPL on a PTB 400 MPa pressure balance as part of EUROMET Project 256. NPL Report. MOM 117

Crawshaw, A H; Robinson, A D (2002) The calibration of force transducers 'on-the-fly'. NPL Report. CMAM 86

D

Davidson, S (2012) Characterisation of the long-term stability of mass standards stored in vacuum by weighing and surface analysis. Metrologia, 49 (3). pp. 200-208.

Davidson, S (2010) Determination of the effect of transfer between vacuum and air on mass standards of platinum-iridium and stainless steel. Metrologia, 47 (4). pp. 487-497.

Davidson, S (2015) EMRP SIB05 deliverable 1.1.3 Evaluation of heat treated silicon samples for surface properties and charge retention. NPL Report. ENG 62

Davidson, S (2013) EUROMET Project 509: A comparison of platinum-iridium kilogram mass standards. NPL Report. ENG 47

Davidson, S (1999) An assessment of commercial mass comparators for the effects of magnetic and magnetically susceptible weights. NPL Report. CMAM 32

Davidson, S; Berry, J; Williams, P (2018) Ensuring the stability of primary mass standards during the implementation of the new definition of the kilogram. Journal of Physics: Conference Series, 1065. 042054 ISSN 1742-6588

Davidson, S; Berry, J J; Marti, K* (2015) Practical requirements for the successful implementation and subsequent dissemination of the redefined kilogram. Vacuum, 120. pp. 139-146.

Davidson, S; Brown, S B; Berry, J (2004) A report on the potential reduction in uncertainty from traceable comparisons of platinum-iridium and stainless steel kilogram mass standards in vacuum. NPL Report. CMAM 88

Davidson, S; Kamps, T J; Knott, A J; Shaylor, J (2023) Guidance Document on Physical Testing of Chain Lubricants. NPL Report. ENG 71

Davidson, S; Peattie, G; Buckley, M*; Palmer, D* (2001) Investigate thermal influence on weights and on mass comparators. NPL Report. CMAM 74

Davidson, S; Perkin, M (2013) An investigation of density determination methods for porous materials, small samples and particulates. Measurement, 46 (5). pp. 1766-1770.

Davidson, S; Perkin, M; Buckley, M* (2004) The measurement of mass and weight. Measurement Good Practice Guide. 71

Davidson, S; Robinson, I A (2014) Preparations for the forthcoming redefinition of the kilogram. Meas. Control, 47 (10). pp. 308-314.

Davidson, S; Stock, M (2021) Beginning of a new phase of the dissemination of the kilogram. Metrologia, 58 (3). 033002 ISSN 0026-1394

Davidson, S; Valcu, A; Medina, N; Zuda, J; Snopko, L; Kolozinska, I (2017) Supplementary comparison of 500 microgram, 200 microgram, 100 microgram and 50 microgram weights—EURAMET.M.M-S9. Metrologia, 54 (1A). 07023 ISSN 0026-1394

Davidson, S; Van Andel, I*; Spohr, I*; Joosten, H*; Smits, E*; Fitzgerald, H* (2012) Report on EURAMET Project 1214. Density measurement of viscous oils (using vibrating tube density meters). NPL Report. ENG 39

Davis, F (2001) Results of a survey of the priorities for an increased range of UK traceable hardness scales. NPL Report. CMAM 69

Davison, S; Berry, J; Abbott, P*; Marti, K*; Green, R*; Malengo, A*; Nielsen, L* (2016) Air-vacuum transfer; establishing traceability to the new kilogram. Metrologia, 53 (5). A95-A113

Downes, S (1998) Present status of the different approaches to the re-definition of the kilogram. NPL Report. CMAM 11

Downes, S; Elandaloussi, S* (1997) A comparison of hydrostatic weighing methods used to determine the density of solid artefacts at the National Physical Laboratory (NPL), UK and Institut National de Metrologie (BNM-INM), FR. NPL Report. MOT 3

Downes, S; Knott, A J; Robinson, I A (2014) Towards a shock tube method for the dynamic calibration of pressure sensors. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 372 (2023). 20130299

Downes, S P; Knott, A J; Robinson, I A; Smith, J*; Beale, R* (2013) Pressure waveform generator for replicating arterial pressure waveforms. NPL Report. ENG 44

E

Elkington, D (1999) The performance of portable extensometer calibration rigs. NPL Report. CMAM 45

Esward, T J (2002) Finite element modelling of oil-operated piston-cylinder pressure balances: determining uncertainties in distortion coefficient predictions using the finite element method. NPL Report. CMAM 85

G

Giusca, C; Severn, I; Greenwood, J C (2007) The effect of hydraulic fluids on pressure balances. NPL Report. DEPC-EM 009

Greenwood, J C (2006) Simulation of the operation and characteristics of static expansion pressure standards. Vacuum, 80. pp. 548-553.

Greenwood, J C (2002) The 'correct' and 'incorrect' generation of a cosine distribution of scattered particles for Monte-Carlo modelling of vacuum systems. Vacuum, 67. pp. 217-222.

Greenwood, J C (2006) The reference gauge technique for static expansion rations- applied to NPL medium vacuum standard SEA3. Vacuum, 81 (4). pp. 427-433.

Greenwood, J C; Carroll, P (2007) Comparison of NPL high vacuum standards SEA2 and SEA5. NPL Report. DEPC-EM 012

Gunn, D; Walker, K (1999) Intercomparison of force standards between NPL, NIM and SCL. NPL Report. CMAM 33

Gunn, D A (1999) Intercomparison of force standards between NPL and CSIRO. NPL Report. CMAM 38

H

Havard, D C; Lewis, S L (1995) Initial stages in disseminating the UK mass scale: from the National Prototype Kilogram to the stainless steel reference kilograms. NPL Report. MOM 98

Hay, M*; Simpson, D (1999) Development of high-line differential pressure standards. NPL Report. CMAM 41

Hughes, E B; Forbes, A B; Sun, W; Maropoulos, P*; Muelaner, J*; Jamshidi, J*; Wang, Z* (2010) iGPS capability study. NPL Report. ENG 23

I

In-Mook Choi*,, ; Robinson, I A (2014) An analysis and design of the mechanical characteristics of the knife edges used in the NPL watt balance. Metrologia, 51 (2). S114-S122

J

Jenkins, R; Knott, A J (1998) Force. Technical Report. NPL, Teddington.

Jiang, Z*; Palinkas, V*; Arias, F E*; Liard, J*; Merlet, S*; Wilmes, H*; Vitushkin, L*; Robertson, L*; Tisserand, L*; Dos Santos, F P*; Bodart, Q*; Falk, R*; Baumann, H*; Mizushima, S*; Maumikinen, J*; Bilker-Koivula, M*; Lee, C*; Choi, I M*; Karaboce, B*; Ji, W*; Wu, Q*; Ruess, D*; Ullrich, C*; Kostelecky, J*; Schmerge, D*; Eckl, M*; Timmen, L*; Le Moigne, N*; Bayer, R*; Olszak, T*; Aringgren, J*; Del Negro, C*; Greco, F*; Diament, M*; Deroussi, S*; Bonvalot, S*; Krynski, J*; Sekowski, M*; Hu, H*; Wang, L J*; Svitlov, S*; Germak, A*; Francis, O*; Becker, M*; Inglis, D*; Robinson, I A (2012) The 8th international comparison of absolute gravimeters 2009: the first key comparison (CCM.G-K1) in the field of absolute gravimetry. Metrologia, 49 (6). pp. 666-684.

K

Kaçmaz, S; Davidson, S (2017) Mass: 100 mg, 10 g, 100 g, 1 kg, 10 kg and 50 kg. Metrologia, 54 (1A). 07020 ISSN 0026-1394

Kearney, A (1999) Provision of technology transfer clubs for pressure, humidity and mechanical metrology. ITT no. MPU8/45.7. April 1997 to September 1999. NPL Report. CMAM 44

Kibble, B P (2001) Essay review - What is mass? Contemp. Phys., 42 (1). pp. 61-63.

Kibble, B P*; Robinson, I A (2014) Principles of a new generation of simplified and accurate watt balances. Metrologia, 51 (2). S132-S139

Kim, M S*; Pratt, J R*; Brand, U*; Jones, C W (2012) Report on the first international comparison of small force facilities: a pilot study at the micronewton level. Metrologia, 49 (1). pp. 70-81.

Kim, M-S*; Pratt, J R*; Brand, U*; Jones, C W (2012) Report on the first international comparison of small force facilities: a pilot study at the micronewton level. Metrologia, 49 (1). pp. 70-81.

Klapetek, P*; Yacoot, A; Grolich, P*; Valtr, M*; Necas, D* (2017) Gwyscan: a library to support non-equidistant scanning probe microscope measurements. Meas. Sci. Technol., 28 (3). 034015

Knott, A; Machado, R R* (2016) Force supplementary comparison EURAMET.M.F-S3 (1 kN, 2 kN, 5 kN and 10 kN). Metrologia, 53 (1A). 07015.

Knott, A J (2001) CIPM 10kN key comparison. NPL results. NPL Report. CMAM 67

Knott, A J (2004) Developments at NPL to improve calibration of force and torque. Meas. Control, 37 (8). pp. 246-251.

Knott, A J (1999) Uncertainty of force generation for forces above 1.2MN. NPL Report. CMAM 47

Knott, A J; Ibrahim, M*; Hasan, E*; Aggag, G* (2006) Comparison of force standards between NIS-Egypt and NPL - United Kingdom. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Knott, A J; Oliveira, R S (2022) Effects of force application rate on transducer performance. In: 24th Conference on the Measurement of Force, Mass and Torque (together with the 14th TC5 Conference on the Measurement of Hardness, the 6th TC16 Conference on Pressure and Vacuum Measurement, and the 5th TC22 Conference on Vibration Measurement), 11-13 October 2022, Cavtat-Dubrovnik, Croatia.

Knott, A J; Robinson, I A (2018) Dynamic characterisation of pressure transducers using shock tube methods. Journal of Physics: Conference Series, 1065. 162002 ISSN 1742-6588

Knott, A J; Robinson, I A (2020) Dynamic characterisation of pressure transducers using shock tube methods. Transactions of the Institute of Measurement and Control, 42 (4). pp. 743-748. ISSN 0142-3312

Kocas, I*; Sabuga, W*; Bergoglio, M*; Eltaweel, A*; Korasie, C*; Farar, P*; Setina, J*; Waller, B; Durgut, Y* (2015) Final report on key comparison EURAMET.M.P-K13 in the range 50 MPa to 500Mpa of hydraulic gauge pressure. Metrologia, 52 (1A). 07008.

L

Leach, R K; Jones, C W (2009) Towards a traceable infrastructure for low force measurements. IFIP International Federation for Information Processing, 260. pp. 307-314.

Lewis, S L; Havard, D C (1996) History of Kilogram 18 and other important UK reference mass. NPL Report. MOT 1

M

Matthews, C E; Pennecchi, F*; Eichstadt, S*; Malengo, A*; Esward, T J; Smith, I M; Elster, C*; Knott, A J; Arrhen, F*; Lakka, A* (2014) Mathematical modelling to support traceable dynamic calibration of pressure sensors. Metrologia, 51 (3). pp. 326-338.

Maybank, L; Knott, A J (1998) Uncertainty of force measurement in build up procedures. In: IMEKO TC3, 1998, Osaka.

Maybank, L; Knott, A J; Elkington, D (1999) Guide to the uncertainty of force measurement. NPL Report. CMAM 24

Mayworm, R C; Webster, E; Davidson, S; Alvarenga, A V; Costa-Felix, R P B (2022) Ultrasonic power measurement by Kibble balance. Measurement, 203. 111788

Meury, P-A*; Bentouati, D*; Berry, J J; Davidson, S; Plimmer, M*; Silvestri, Z*; Ojanen, M*; Hogstrom, R*; Fuchs, P*; Marti, K*; Zuda, J*; Kacmaz, S*; Green, R* (2015) Homogeneity and resistance of metal on metal coatings (EMRP SIB-05 Deliverable 1.2.2). NPL Report. ENG 64

Meury, P-A*; Bentouati, D*; Berry, J J; Davidson, S; Plimmer, M*; Silvestri, Z*; Ojanen, M*; Hogstrom, R*; Fuchs, P*; Marti, K*; Zuda, J*; Kacmaz, S*; Green, R* (2015) Summary report of properties of materials for potential use as mass transfer standards. NPL Report. ENG 58

Morgan, L E*; Postma, O*; Kuiper, K F*; Mark, D F*; van der Plas, W*; Davidson, S; Perkin, M; Villa, I M*; Wijbrans, J R* (2011) A metrological approach to measuring (40)Ar* concentrations in K-Ar and (40)Ar/(39Ar mineral standards. Geochem. Geophys. Geosyst., 12. A0AA20

N

NPL, (2002) Good Practice Guidance Note - Thermal effects on balances and weights. Other.

NPL, (2002) Good Practice Guidance Note: Thermal effects on balances and weights. Other.

P

Peattie, G; Davidson, S (1998) Design and assessment of an automatic 50 kg weight exchanger. NPL Report. CMAM 23

Peattie, G; Davidson, S (1998) Modifications to the NPL bullion balance. NPL Report. CMAM 21

Perkin, M (2008) Report on EUROMET key comparison of 1 kg standards in stainless steel (EUROMET.M.M-K4). NPL Report. ENG 4

Perkin, M (2009) Report on EUROMET key comparison of pressure measurements standards in the range 80 kPa to 7 MPa (EUROMET.M.P-K3.b). NPL Report. ENG 14

Perkin, M (2000) Report on a comparison of pressure standards in the range 10 MPa to 100 MPa. NPL Report. CMAM 54

Perkin, M; Davidson, S (2016) Guide to the storage of primary mass standards. Measurement Good Practice Guide. 139

Perkin, M; Davidson, S (2016) Guide to weighing in vacuum. Measurement Good Practice Guide. 140

Perkin, M P (2009) Report on EUROMET key comparison of multiples and submultiples of the kilogram (EUROMET.M.M-K2). NPL Report. ENG 13

Perkin, M P (1997) A comparison of low differential pressure standards in the range 3 Pa to 1000 Pa. NPL Report. CMAM 3

Perkin, M P; Picard, A*; Lecolinet, M*; Fen, K*; Sardi, M*; Miiler, A*; Agarwal, A*; Jescheck, M*; Wüthrich, C* (2008) Final report, CCM key comparison CCM.P-K2, pressure (10 kPa to 120 kPa) absolute mode. Metrologia, 45 (Tech, ). 07002.

Perkins, M P (2010) Report on EURAMET key comparison of multiples and submultiples of the kilogram (EURAMET.M.M-K2.1). NPL Report. ENG 17

Petley, B W (1994) Clocking the fundamental physical constants. Phys. World, 7 (1). pp. 23-24.

Petley, B W (2001) The fundamental constants and metrology. Proceedings of the International School of Physics "Enrico Fermi", 146. pp. 121-145.

Petley, B W (2001) The fundamental constants and physics. Proceedinds of the International School of Physics "Enrico Fermi", 146. pp. 93-120.

Petley, B W (1997) The fundamental constants of physics. In: The Dictionary of Physics. UNSPECIFIED.

Petley, B W (1996) The mole and the unified atomic mass unit. Metrologia, 33 (3). pp. 261-264.

Picard, A*; Bignell, N*; Borys, M*; Downes, S; Mizushima, S* (2009) Mass comparison of the 1 kg silicon sphere AVO#3 traceable to the International Prototype K. Metrologia, 46 (1). pp. 1-10.

Picard, A*; Bignell, N*; Borys, M*; Downes, S; Mizushima, S* (2009) Mass comparison of the 1 kg silicon sphere AVO#3 traceable to the international prototype K. Metrologia, 46 (1). pp. 1-10.

Pratt, B*; Robinson, A (2008) A comparison between supported and unsupported beams for use in static torque calibrations. Measurement, 41 (10). pp. 1162-1168.

Pratt, B*; Robinson, A D (2006) A comparison between supported and unsupported beams for use in static torque calibrations. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

R

Raymond, N M (1999) Operation of the Mass and Weighing Club April 1998 to September 1999. NPL Report. CMAM 43

Raymond, N M; Nielsen, L* (1997) A Bi-Lateral Comparison of a 0.5 gram to 0.001 gram Weight Set. NPL Report. CMAM 6

Redgrave, F J; Music, V (1999) Metrological relationaships between primary vacuum standards. NPL Report. CMAM 46

Reis Machado, R*; Kasper, P*; Weiglhofer, E*; Kumme, R*; Navrozidis, G*; Vamossy, C*; Verbeek, J*; Wozniak, M*; Spohr, I*; Sandu, I*; Wuthrich, C*; Knott, A J (2014) Final report on force key comparison EUROMET.M.F-K2: 50 kN and 100 kN (EURAMET Project No 518). Metrologia, 51 (1A). 07007.

Reis Machado, R*; Kasper, P*; Weiglhofer, E*; Kumme, R*; Navrozidis, G*; Vamossy, C*; Verbeek, J*; Wozniak, M*; Spohr, I*; Sandu, I*; Wuthrich, C*; Knott, A J (2014) Final report on force key comparison EUROMET.M.F-K2: 50 kN and 100 kN (EURAMET Project No 518). Metrologia, 51 (1A). 07007.

Robinson, A (2008) Guide to the calibration and testing of torque transducers. Measurement Good Practice Guide. 107

Robinson, A (2008) UK torque intercomparison - 2007. NPL Report. ENG 3

Robinson, A (2007) The design, development and commissioning of a 2 kN.m torque standard machine. CalLab Mag., 14 (1). pp. 31-25.

Robinson, G M (1996) Second NPL analysis of the distortion of pressure balances as part of EUROMET project 256. NPL Report. MOT 6

Robinson, I A (2012) Alignment of the NPL Mark II Watt balance. Meas. Sci. Technol., 23 (12). 124012

Robinson, I A (2018) The Kibble Balance and the Forthcoming Revision of the SI. In: 2018 Conference on Precision Electromagnetic Measurements (CPEM 2018), 8-13 July 2018, Paris, France.

Robinson, I A (2013) Planck, Avogadro and measuring mass using fundamental constants. Annalen der Physik, 525 (8-9). A135-A137

Robinson, I A (2008) Progress towards the redefinition of the kilogram: measurements of Planck's constant using watt balances. In: CPEM 2008 - Conference on Precision Electromagnetic Measurements Digest, 8-13 June 2008, Colorado, USA.

Robinson, I A (2016) Simplified fundamental force and mass measurements. Metrologia, 53 (4). pp. 1054-1060.

Robinson, I A (2012) Toward the redefinition of the kilogram: a measurement of the Planck constant using the NPL Mark II watt balance. Metrologia, 49 (1). pp. 113-156.

Robinson, I A (2009) Towards a final result from the NPL Mk II watt balance. IEEE Trans. Instrum. Meas., 58 (4). pp. 936-941.

Robinson, I A (2016) Towards the next generation NPL watt balance. In: 2016 Conference on Precision Electromagnetic Measurements (CPEM), 10-15 July 2016, Ottawa, Canada.

Robinson, I A (2009) Towards the redefinition of the kilogram: measurements of Planck's constant using watt balances. IEEE Trans. Instrum. Meas., 58 (4). pp. 942-948.

Robinson, I A (2014) Watt and joule balances. Foreword. Metrologia, 51 (2). S1-S3.

Robinson, I A (2012) A simultaneous moving and weighing technique for a watt balance at room temperature,. Metrologia, 49 (1). pp. 108-112.

Robinson, I A; Berry, J; Bull, C; Davidson, S; Jarvis, C; Lovelock, P; Lucas, C; Urquhart, J; Webster, E; Williams, P (2018) Developing the Next Generation of NPL Kibble Balances. In: 2018 Conference on Lasers and Electro-Optics (CLEO), 13-18 May 2018, San Jose, CA, USA.

Robinson, I A; Georgeakopoulos, D* (2012) Electrical Quantum Standards and their role in the SI. Meas. Sci. Technol., 23 (12). 120301

Robinson, I A; Kibble, B P (2000) Further progress in relating the kilogram to h with the NPL Watt balance. In: Conference on Precision Electromagnetic Measurements (CPEM) 2000, 14-19 May 2000, Sydney, Australia.

Robinson, I A; Kibble, B P (2006) The NPL Watt Balance: modifications and new measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Kibble, B P (2006) The NPL Watt Balance: modifications and new measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Kibble, B P (2008) Towards a final result from the NPL Mark II watt balance. In: CPEM 2008 - Conference on Precision Electromagnetic Measurements Digest, 8-13 June 2008, Colorado, USA.

Robinson, I A; Kibble, B P (2008) An initial measurement of Planck's constant using the NPL Mark II watt balance. Metrologia, 44 (6). pp. 427-440.

Robinson, I A; Kibble, B P* (2014) Prototyping a new generation of watt balances. In: 29th Conference on Precision Electromagnetic Measurements (CPEM 2014), 24-29 August 2014, Rio de Janeiro, Brazil.

Robinson, I A; Lovelock, P (2006) The design of the third generation NPL Watt Balance. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Lovelock, P (2006) The design of the third generation NPL Watt Balance. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Schlamminger, S* (2016) The watt or Kibble balance: a technique for implementing the new SI definition of the unit of mass. Metrologia, 53 (5). A46-A74

S

Sanchez, C A*; Wood, B M*; Inglis, A D*; Robinson, I A (2012) Determination and correction of mass exchange errors in the NRC watt balance. In: 2012 Conference on Precision Electromagnetic Measurements (CPEM 2012), 1-6 July 2012, Washington DC, USA.

Sanchez, C A*; Wood, B M*; Inglis, D*; Robinson, I A (2013) Elimination of mass exchange errors in the NRC watt balance. IEEE Trans. Instrum. Meas., 62 (6). pp. 1506-1511.

Savarin, A*; Medina, N*; Knott, A (2016) Force key comparison CCM.F-K2.a.1 (50kN and 100 kN). Metrologia, 53 (1A). 07001.

Scorer, T*; Perkin, M; Buckley, M* (2004) Weighing in the pharmaceutical industry. Measurement Good Practice Guide. 70

Severn, I (2004) The assignment of uncertainties to mass standards at NPL. NPL Report. MATC(A)166

Severn, I (2000) A collaboration between ten national measurement institutes to measure the mass of two one kilogram mass standards. NPL Report. CMAM 36

Severn, I; Raymond, N M (1996) The assignment of values to NPL's 1 kg standards following the third periodic verification of prototype kilograms. NPL Report. MOT 2

Simpson, D (1998) Pressure & Vacuum. Technical Report. NPL, Teddington.

Stanbury, G; Davis, F (2000) Provision of hardness standards - final report. NPL Report. CMAM 53

Stanbury, G; Elkington, D (1999) Proposed future research for hardness standards. NPL Report. CMAM 31

Stock, M; Barat, P; Pinot, P; Beaudoux, F; Espel, P; Piquemal, F; Thomas, M; Ziane, D; Abbott, P; Haddad, D; Kubarych, Z; Pratt, J R; Schlamminger, S; Fujii, K; Fujita, K; Kuramoto, N; Mizushima, S; Zhang, L; Davidson, S; Green, R G; Liard, J; Sanchez, C; Wood, B; Bettin, H; Borys, M; Busch, I; Hämpke, M; Krumrey, M; Nicolaus, A (2018) A comparison of future realizations of the kilogram. Metrologia, 55 (1). T1-T7. ISSN 0026-1394

Stock, M; Conceição, P; Fang, H; Bielsa, F; Kiss, A; Nielsen, L; Kim, D; Kim, M; Lee, K -C; Lee, S; Seo, M; Woo, B -C; Li, Z; Wang, J; Bai, Y; Xu, J; Wu, D; Lu, Y; Zhang, Z; He, Q; Haddad, D; Schlamminger, S; Newell, D; Mulhern, E; Abbott, P; Kubarych, Z; Kuramoto, N; Mizushima, S; Zhang, L; Fujita, K; Davidson, S; Green, R G; Liard, J O; Murnaghan, N F; Sanchez, C A; Wood, B M; Bettin, H; Borys, M; Mecke, M; Nicolaus, A; Peter, A; Müller, M; Scholz, F; Schofeld, A (2020) Report on the CCM key comparison of kilogram realizations CCM.M-K8.2019. Metrologia, 57 (1A). 07030 ISSN 0026-1394

Stock, M; Davidson, S; Fang, H (2022) Dissemination of the kilogram following its redefinition. In: 24th Conference on the Measurement of Force, Mass and Torque (together with the 14th TC5 Conference on the Measurement of Hardness, the 6th TC16 Conference on Pressure and Vacuum Measurement, and the 5th TC22 Conference on Vibration Measurement), 11-13 October 2022, Cavtat-Dubrovnik, Croatia.

Stock, M; Davidson, S; Fang, H; Milton, M; de Mirandes, E; Richard, P; Sutton, C (2017) Maintaining and disseminating the kilogram following its redefinition. Metrologia, 54 (6). S99-S107.

Stuart, P R (1995) EUROMET Project 220: recommended procedure for the calculation and expression of pressure balance measurement uncertainties. NPL Report. MOM 122

Stuart, P R (1993) Measurement uncertainties of U-tube manometers and pressure balances. Metrologia, 30. 727 - 735

Stuart, P R (1993) Progress report on an international comparison in the pressure range 10 kPa to 140 kPa. Metrologia, 30. 705 - 709

Stuart, P R (1995) Recommended contents for pressure balance calibration certificates (part of EUROMET Project 220). NPL Report. MOM 123

U

Uthayakumar, S; Davidson, S; Pearce, J (2021) Mass Loss of Platinum-Rhodium Thermocouple Wires at 1324 degrees C Lower mass loss observed with enclosed wires. Johnson Matthey Technology Review, 65 (4). pp. 568-573.

W

Webster, E; Robinson, I A; Chong, H; Davidson, S (2022) Kibble Balance for gram level mass measurements. In: 24th Conference on the Measurement of Force, Mass and Torque (together with the 14th TC5 Conference on the Measurement of Hardness, the 6th TC16 Conference on Pressure and Vacuum Measurement, and the 5th TC22 Conference on Vibration Measurement), 11-13 October 2022, Cavtat-Dubrovnik, Croatia.

Williams, E*; Robinson, I A (2011) Superconductivity and the SI (Metric) systems based on fundamental constants. In: 100 years of Superconductivity. Taylor & Francis. ISBN 9781439849460

Z

Zelenka, Z*; Davidson, S; Berry, J J; Vamossy, C* (2015) Final report on EURAMET key comparison EURAMET.M.M-K2.6 (1345) of mass standards of 100 mg, 2 g, 20 g, 500 g (sub-multiple of the kilogram). Metrologia, 52 (1A). 07010.

Zelenka, Z*; Davidson, S; Vamossy, C* (2016) Bilateral comparison on volume of mass standards. Metrologia, 53 (1A). 07007.

Zeng, W*; Jiang, X*; Smith, I M; Scott, P* (2010) Transient signal separation in Watt balance experiements. Phys. Lett. A, 374 (11-12). pp. 1301-1306.

Zou, L; Hunt, C (2013) Guideline for measuring coating adhesion to electronic boards using tape peel testing. Measurement Good Practice Guide. 117

This list was generated on Mon Feb 17 15:38:34 2025 GMT.