< back to main site

Publications

Items where Year is 2001

Up a level
Export as [feed] RSS
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | Y | Z
Number of items: 327.

A

Alexander, M J; Yajima, H*; Sugiura, A*; Camell, D*; Psencik, J*; Hunter, J D* (2001) International comparison CCEM.RF-K7b.F (GT-RF 92-8): results of an intercomparison of EMC antenna factors in the frequency range 30 MHz - 1000 MHz - non-resonant dipole antennas. NPL Report. CETM 36

Andrews, A S; Brand, J; Butterfield, D M; Gee, R M (2001) Summary of UK ambient hydrocarbon air quality network operations during 2000. NPL Report. COEM 61

Andrews, A S; Brand, J; Butterfield, D M; Gee, R M (2001) UK ambient hydrocarbon air quality network: 2000 audit report. NPL Report. COEM 64

Angliss, R F; Bass, G A; Sander, T (2001) Brachytherapy, diagnostic radiology, mammographic radiology and ophthalmic applicators : An assessment of current and future needs in the UK and the role of NPL. NPL Report. CIRM 52

Angliss, R F; Moretti, C J; Nutbrown, R F (2001) Proposed specification for a primary standard of air kerma for 60Co, 137Cs and 192Ir -ray sources. NPL Report. CIRM 53

Arnaut, L R (2001) EUT reliability testing in mode-stirred reverberation chambers. In: 14th EMC Symposium, 20-22 February 2001, Zurich, Switzerland.

Arnaut, L R (2001) Effect of local stir and spatial averaging on the measurement and testing in mode-tuned and mode-stirred reverberation chambers. IEEE Trans. Electromagn. Compat., 43 (3). pp. 305-325.

Arnaut, L R (2001) Operation of electromagnetic reverberation chambers and wave diffractors at relatively low frequencies. IEEE Trans. Electromagn. Compat., 43 (4). pp. 637-653.

Arnaut, L R (2001) Statistical characterization of complex media in random fields. Int. J. Electron. Commun., 55 (4). pp. 211-223.

Arnaut, L R (2001) Statistical characterization of complex media in random fields. Int. J. Electron. Commun., 55 (4). pp. 211-223.

Arnaut, L R (2001) Statistical characterization of tailored complex composite media for certified reference materials. NPL Report. CETM 32

Arranz, E; Brown, C S; Gnaniah, S J P; Percio, S (2001) Latent heat of polymers crystallised under pressure. NPL Report. MATC(A)44

Awan, S A; Kibble, B P (2001) Impedance measurements at frequencies up to 1 MHz. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Awan, S A; Kibble, B P; Robinson, I A; Giblin, S P (2001) A new four terminal-pair bridge for traceable impedance measurements at frequencies up to 1 MHz. IEEE Trans. Instrum. Meas., 50 (2). pp. 282-285.

Awan, S A; Williams, J M; Bryant, S; Roberts, P C A (2001) Progress towards Internet-based calibration of electrical quantities. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

B

Baker, M; Woods, M J (2001) Comparison of 201Tl solution sources in UK hospitals, 2001. NPL Report. CIRM 47

Barker, R M; Forbes, A B (2001) Discrete model validation. (Software Support for Metrology Best Practice Guide No. 10). Technical Report. NPL.

Barker, R M; Reid, I* (2001) Numerical algorithm for metrology. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Bartlett, D T*; Tanner, R J*; Tagziria, H; Thomas, D J (2001) Response characteristics of neutron survey instruments. Technical Report. NRPB, UK.

Barwood, G P; Gao, K; Gill, P; Huang, G; Klein, H A (2001) Development of an ultra-narrow diode laser for interrogating the 674 nm 2S1/2 - 2D5/2 'clock' transition in Sr+. Proc. SPIE - Int. Soc. Opt. Eng., 4269. pp. 134-142.

Barwood, G P; Gao, K*; Gill, P; Huang, G; Klein, H A (2001) Development of an ultra-narrow diode laser for interrogating the 674 nm 2S1/2-2D5/2 "clock" transition in Sr+. Proc. SPIE - Int. Soc. Opt. Eng., 4269. pp. 134-142.

Barwood, G P; Gao, K*; Gill, P; Huang, G; Klein, H A (2001) Development of optical frequency standards based upon the 2S1/2-2D5/2 transition in 88Sr+ and 87Sr+. IEEE Trans. Instrum. Meas., 50 (2). pp. 543-547.

Battuello, M*; Chimenti, V*; Machin, G; McEvoy, H C; Perez, J*; Ricolfi, T*; Sergienko, R* (2001) A comparison of the primary standard zinc point blackbody cavities of NPL and CEM with IMGC. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Beamiss, G A; Hayman, G; Robinson, S P (2001) The provision of standards for underwater acoustics at simulated ocean conditions by use of the NPL Acoustic Pressure Vessel. NPL Report. CMAM 76

Beaumont, J; Orford, G (2001) Measurement techniques and results of an intercomparison for RF power in R900 at frequencies of 75 and 94 GHz. Draft B report of the pilot laboratory. NPL Report. CETM 28

Bell, S A (2001) A beginner's guide to uncertainty of measurement. Measurement Good Practice Guide. 11

Bell, S A; Boyes, S J (2001) An assessment of experimental data that underpin formulae for water vapour enhancement factor. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Bell, S A; Stevens, M; Barwood, G P; Edwards, C S; Gill, P (2001) Evaluation of a tuneable diode laser absorption spectrometer against the NPL low frost-point generator. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Bentely, R D*; Iles, R H A*; Jones, J B L*; Hunter, R*; Taylor, G C; Thomas, D J (2001) Monitoring cosmic radiation on aircraft. In: Proceedings of the Second Solar Cycle and Space Weather Euroconference, 24-29 September 2001.

Birch, K* (2001) Estimating uncertainties in testing. Measurement Good Practice Guide. 36

Bloembergen, P*; van der Ham, E W M*; Machin, G; Schrama, C* (2001) A study on the instrument-oriented characterisation of low temperature radiation thermometers. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Brewin, A; Hunt, C (2001) Test method for the measurement of tensile and shear tack for electronic solder pastes and adhesives. NPL Report. MATC(A)31

Brewin, A; Zou, L; Hunt, C (2001) Code of practice for dispensing electronic materials. NPL Report. MATC(A)82

Brewin, A; Zou, L; Hunt, C (2001) Stability of electronic components in lead-free processing. NPL Report. MATC(A)79

Brewin, A; Zou, L; Hunt, C (2001) Tack of electronic adhesives in tension and shear. NPL Report. MATC(A)30

Brewin, A; Zou, L; Hunt, C (2001) Tack testing of solder paste in tension and shear. NPL Report. MATC(A)29

Brooks, M; Loveday, M S; Gee, M G (2001) NPL Friction Measurement Methods: data assessment techniques and a sample database. NPL Report. MATC(A)13

Brooks, R F; Mills, K C* (2001) Interfacial phenomena in high temperature processes. Metallurgia, 68 (6). pp. 7-10.

Broughton, W R (2001) Analytical models for assessing environmental degradation of unidirectional and cross-ply laminates. NPL Report. MATC(A)1

Broughton, W R (2001) Thick composites. NPL Report. CMMT(A)263

Broughton, W R; Attanz, E; Mera, R D; Duncan, B C (2001) Effects of specimen geometry on the strength of flexible adhesive joints. NPL Report. MATC(MN)11

Broughton, W R; Crocker, L E; Urquhart, J M (2001) Geometric and material property effects on the strength of rubber-toughened adhesive joints. NPL Report. MATC(MN)10

Broughton, W R; Crocker, L E; Urquhart, J M (2001) Strength of adhesive joints: a parametric study. NPL Report. MATC(A)27

Broughton, W R; Gower, M R L (2001) Preparation and testing of adhesive joints. Measurement Good Practice Guide. 47

Broughton, W R; Gower, M R L; Lodeiro, M J; Shaw, R M (2001) Through-thickness testing of polymer matrix composites. NPL Report. MATC(MN)06

Broughton, W R; Lodeiro, M J; Sims, G D (2001) Validation of procedures for ultrasonic C-Scan inspection of PMCs: internation round-robin. NPL Report. MATC(A)2

Brown, R J C; Dyson, P J*; Ellis, D J*; Welton, T* (2001) 1-Butyl-3-methylimidazolium cobolt tetracarbonyl [bmin][Co(CO)4]: a catalytically active organometallic ion liquid. Chem. Commun.. pp. 1862-1863.

Brown, R J C; Kucernak, A R* (2001) The electrochemistry of platinum phthalocyanine microcrystals - electrochemical behaviour in aqueous electrolytes. Electrochimica Acta, 46. pp. 2573-2582.

Brown, R J C; Milton, M J T (2001) Uncertainty in the operation of the Harned Cell arising from temperature and bias potential effects. Technical Report. PTB, Germany.

Brown, R J C; Milton, M J T; Brewer, P*; Wielgosz, R I (2001) High accuracy titrimetry with application to HCl. NPL Report. COAM 5

Brown, R J C; Milton, M J T; Gallop, J C (2001) Review of techniques for single molecule detection in biological applications. NPL Report. COAM 2

Butterfield, D M; Woolley, A M; Sweeney, B P (2001) London air quality network: ratification report for July to December 2000. NPL Report. COEM 62

Butterfield, D M; Woolley, A M; Sweeney, B P (2001) UK automatic rural network: ratification report for July to December 2000. NPL Report. COEM 63

C

Cain, M G (2001) Smart materials: complexity of measurement. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Cain, M G; Stewart, M (2001) CPM8.1 Task 4: the measurement of blocking force. NPL Report. MATC(A)48

Cain, M G; Stewart, M (2001) CPM8.1 Task 6: evaluation of new functional materials. NPL Report. MATC(A)58

Cain, M G; Stewart, M (2001) Piezoelectric resonance. Measurement Good Practice Guide. 33

Clarke, T A*; Wang, X; Cross, N R; Forbes, A B; Fossati, P M (2001) Performance verification for large volume metrology systems. In: LAMPDAMP 2001 5th International Conference on Laser Metrology and Machine Performance, 2001, Brighton, UK.

Clarke, TA*; Forbes, A B (2001) How to tell if your large volume measurement system is suitable for a given task. Qual. Today (Septem). pp. 24-27.

Cox, M G; Dainton, M P; Harris, P M (2001) Software specifications for uncertainty calculation and associated statistical analysis. NPL Report. CMSC 10/01

Cox, M G; Dainton, M P; Harris, P M (2001) Testing the numerical correctness of software for the calculation of sample standard deviation. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Cox, M G; Dainton, M P; Harris, P M (2001) Uncertainty and statistical modelling. (Software Support for Metrology Best Practice Guide No. 6). Technical Report. NPL, UK.

Cox, M G; Dainton, M P; Ridler, N M (2001) An interpolation scheme for precision reflection coefficient measurements at intermediate frequencies. Part 1: theoretical development. In: IMTC 2001 - 18th IEEE Instrumentation and Measurement Technology Conference, 21-23 May 2001, Budapest, Hungary.

Cox, M G; Harris, P M (2001) Testing spreadsheets and other packages used in metrology: report on discussions with other National Measurement Institutes (2000/2001). NPL Report. CMSC 09/01

Cox, M G; Siebert, B* (2001) The role of Monte Carlo simulations in uncertainty evaluation. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Crocker, L; Dean, G (2001) Temperature dependence of the properties of an epoxy adhesive. NPL Report. MATC(A)43

Crocker, L; Duncan, B C (2001) Methods for obtaining volumetric coefficients for hyperelastic modelling of the flexible adhesives. NPL Report. CMMT(A)286

Crocker, L E; Dean, G D (2001) Tensile testing of adhesive butt-joint specimens. NPL Report. MATC(MN)09

Cumpson, P J (2001) Estimation of inelastic mean free paths for polymers and other organic materials: use of quantitative structure-property relationships. Surf. Interface Anal., 31. pp. 23-34.

D

Davidson, S; Peattie, G; Buckley, M*; Palmer, D* (2001) Investigate thermal influence on weights and on mass comparators. NPL Report. CMAM 74

Davies, A*; Foreman, A*; Shaw, R M; Sims, G D (2001) Fibre reinforced plastic composites - machining of composites and specimen preparation. Measurement Good Practice Guide. 38

Davis, F (2001) Results of a survey of the priorities for an increased range of UK traceable hardness scales. NPL Report. CMAM 69

Davis, J A; Clarke, J D (2001) Time and frequency transfer using GPS common-view. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Dean, G D; Crocker, L E (2001) Analysis of joint tests on an epoxy adhesive. NPL Report. MATC(A)40

Dean, G D; Crocker, L E (2001) The use of finite element methods for design with adhesives. Measurement Good Practice Guide. 48

Dean, J C J; Baker, M; Brosnan, W E; Collins, S M; Johal, S K; Jerome, S M; Keightley, J D; Pearce, A K; Phillips, H C; Scott, C J; Tyler, D K; Woods, M J (2001) Environmental radioactivity comparison exercise 2001. NPL Report. CIRM 49

Downes, S P (2001) Interim report on the fabrication and characterisation of the surface of silicon artefacts used in the Avogadro project. NPL Report. CMAM 64

Dowson, S P (2001) Standards for sound level meters and sound calibrators, the current status. Proc. Inst. Acoust., 23 (1). pp. 9-18.

Dowson, S P; Jiggins, M (2001) A review report of the current status of specification standards, calibration and testing of noise-measuring instrumentation in the UK and their applications to MCERTS. NPL Report. CMAM 70

Dudley, R A; Morgan, A G; Ridler, N M (2001) Advances in NPL's Internet calibration and measurement services for high-frequency electrical quantities. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Dudley, R A; Morgan, A G; Ridler, N M; Stevens, M J; Nesbitt, L*; Plummer, N J*; Scott, H J*; Smyth, S D*; Wylie, S* (2001) Maintaining an internet calibration facility: experiences gained from the first six months of operation. In: NCSL International Workshop and Symposium 2001, 29 July - 2 August 2001, Washington D.C, USA.

Dudley, R A; Ridler, N M (2001) Internet calibration direct to national measurement standards for automatic network analysers. In: IMTC 2001 - 18th IEEE Instrumentation and Measurement Technology Conference, 21-23 May 2001, Budapest, Hungary.

Duncan, B (2001) The hyperelastic properties of a polyurethane adhesive. NPL Report. MATC(A)23

Duncan, B C (2001) Loop tack measurements. NPL Report. MATC(MN)02

Duncan, B C; Crocker, L; Urquhart, J M; Arranz, E; Mera, R D; Broughton, W R (2001) Failure of flexible adhesive joints. NPL Report. MATC(A)36

Duncan, B C; Crocker, L E (2001) Characterisation of flexible adhesives for design. Measurement Good Practice Guide. 45

Duncan, B C; Crocker, L E (2001) Review of tests for adhesion strength. NPL Report. MATC(A)67

Dusek, M; Hunt, C (2001) A novel measurement technique for stencil printed solder paste. NPL Report. MATC(A)08

Dusek, M; Nottay, J; Hunt, C (2001) Compatibility of lead-free solders with PCB materials. NPL Report. MATC(A)89

Dusek, M; Nottay, J; Hunt, C; Lu, H*; Bailey, C* (2001) An experimental validation of modelling for Pb-free solder joint reliability. NPL Report. MATC(A)11

E

Edwards, C S; Barwood, G P; Bell, S A; Gill, P; Stevens, M (2001) A tunable diode laser absorption spectrometer for moisture measurements in the low ppbv range. Meas. Sci. Technol., 12. pp. 1214-8.

Edwards, C S; Barwood, G P; Gill, P; Bell, S A; Stevens, M; Schirmer, B*; Melling, A*; Venzke, H*; Weber, H*; Benyon, R*; Mackrodt, P*; Nielsen, J*; de Groot, M J*; Pusterla, L* (2001) Development and evaluation of a tunable diode laser absorption spectrometer for trace humidity measurements. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Esward, T J; Wright, L (2001) Finite element optimisation for problems in acoustics. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

F

Fellmuth, B*; Head, D I; Pavese, F*; Szmyrka-Grazebyk, A*; Tew, W* (2001) Special problems when realising the triple point of hydrogen as a defining fixed point of the ITS-90. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Fletcher, N E; Janssen, T J B M; Hartland, A (2001) Temperature as a limitation to the accuracy of SETSAW devices as quantum standards of current. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Fletcher, N E; Janssen, T J B M; Williams, J M (2001) A cryogenic current comparator based resistance bridge for the range 10 k to 1 G . In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Flowers, J L; Klein, H A; Knight, D J E; Margolis, H S (2001) Hydrogenic systems for calculable frequency standards: status and options. NPL Report. CBTLM 11

Forbes, A B (2001) Model validation in metrology. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Fox, N P (2001) Developments in optical radiation measurements at NPL. 1. Proc. SPIE - Int. Soc. Opt. Eng., 4450. pp. 140-154.

Fox, N P (2001) Developments in optical radiation measurements at NPL. 2. Proc. SPIE - Int. Soc. Opt. Eng., 4450. pp. 155-167.

G

Gallop, J C; Hao, L (2001) Applications of coupled dielectric resonators using SrTiO3 pucks: tunable resonators and novel thermometry. IEEE Trans. Instrum. Meas., 50. pp. 526-530.

Gallop, J C; Hao, L (2001) Further developments of a sapphire/rutile compensated dielectric resonator frequency standard. In: 15th EFTF Conference Proceedings, 2001.

Gant, A J; Gee, M G (2001) Wear of tungsten carbide-cobalt hardmetals and hot isostatically pressed high speed steels under dry abrasive conditions. Wear, 251. pp. 908-915.

Gee, M G (2001) Low load multiple scratch tests of ceramics and hardmetals. Wear, 250 (Part 1). pp. 264-281.

Gee, M G (2001) Procedure for ball cratering test. NPL Report. MATC(A)52

Gee, M G (2001) Procedure for gas jet erosion testing. NPL Report. MATC(A)53

Gee, M G (2001) Wear testing standards database. NPL Report. MATC(A)07

Gee, M G; Gant, A (2001) Procedure for rotating wheel abrasion testing. NPL Report. MATC(A)54

Gee, M G; Gant, A; Hutchings, I*; Bethke, R*; Schiffman, K*; Van Acker, K*; Poulat, S*; Gachon, Y*; von Stebut, J* (2001) Critical evaluation of abrasion and wear testing of coatings by ball cratering. NPL Report. MATC(A)62

Giblin, S P; Awan, S A (2001) Progress on an automated co-axial bridge for capacitance comparison. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Giblin, S P; Kleinschmidt, P; Zorin, A*; Lotkhov, S* (2001) Towards a quantum capacitance standard. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Gill, P (2001) Raising the standards (in 'Science perspective on atomic clocks'). Science, 294 (5547). pp. 1666-8.

Gilmore, I S (2001) Optimisation of operating conditions. In: ToF-SIMS: surface analysis by mass spectrometry. SurfaceSpectra/IMPublications. ISBN 1901019039

Gilmore, I S; Seah, M P (2001) VAMAS 2002: Static ToF SIMS inter-laboratory study - protocol for analysis. NPL Report. COAM 6

Grant, P; Lord, J D (2001) Metals foams offer engineering benefits. Metallurgia (Septem). pp. 12-15.

Gregory, A P; Clarke, R N (2001) Tables of the complex permittivity of dielectric reference liquids at frequencies up to 5 GHz. NPL Report. CETM 33

Griffiths, A J; Turnbull, A (2001) Defining the limits of application of duplex stainless steel coupled to carbon steel in oilfield environments. Corrosion, 57 (2). pp. 165-174.

Griffiths, A J; Turnbull, A; Francis, P E; Orkney, L P; Ryan, M; Hawkins, B (2001) Evaluation of electrochemical techniques for characterising the corrosion resistance of superduplex stainless steel welds. Stainless Steel World (Septem). pp. 21-23.

Gélat, P N; Preston, R C; Hurrell, A* (2001) Development, validation and publication of a complete model for hydrophone/amplifier transfer characteristics. NPL Report. CMAM 61

H

Hall, M; Bartholomew, J G; Harmon, S A C; Henderson, L C A (2001) The calibration and use of commercial low relative magnetic permeability measurement equipment in mass metrology. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Hall, M; Bartholomew, J G; Harmon, S A C; Henderson, L C A (2001) The traceable measurement of magnetic dipole moment and the calibration of commercial magnetometers. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Hall, M; Bartholomew, J G; Henderson, L C A (2001) Measurement of the magnetic dipole moment of ferromagnetic material specimens. NPL Report. CETM 31

Hall, S R G; Jones, T C E; Roddie, A G (2001) Traceability for high power fibre optic measurements. In: OFMC'01 6th Optical Fibre Measurement Conference, 26-28 September 2001, Girton College, Cambridge, UK.

Hanes, P (2001) Comparison of measurement uncertainty budgets for calibration of sound calibrators: Euromet projet 576. NPL Report. CMAM 73

Hao, L; Gallop, J C (2001) Measurement of thermal conductance of interfaces using microwave resonant composite dielectric structures. In: 15th EFTF Conference Proceedings, 2001.

Hao, L; Gallop, J C; Klein, N*; Winter, M* (2001) Low phase noise temperature - compensated cryogenic whispering gallery mode resonator operated at 63 K in a closed cycle cooler. IEEE Trans. Instrum. Meas., 50. pp. 515-518.

Hao, L; Gallop, J C; Macfarlane, J C; Carr, C* (2001) HTS flux concentrator for non-invasive sensing of charged-particle beams. Supercond. Sci. Technol., 14. pp. 1115-1118.

Hao, L; Gallop, J C; Parnell, A*; Cohan, L*; Thiess, S* (2001) Non-linear microwave response og HTS thin films: a comparison of intermodulation and conventional measurements. IEEE Trans. Appl. Supercond., 11. pp. 3411-34114.

Hao, L; Gallop, J C; Purnell, A J*; Cohen, L F* (2001) Intermodulation measurements on high temperature superconducting thin films. J. Supercond., 14. pp. 29-33.

Hao, L; Macfarlane, J C; Gallop, J C (2001) Ion beam measurements with HTS SQUID and current comparator. IEEE Trans. Instrum. Meas., 50 (2). pp. 302-305.

Hao, L; Macfarlane, J C*; Peden, D A*; Lee, R A M*; Gallop, J C; Carr, C* (2001) Design and performance of an HTS current comparator for charged-particle-beam measurements. IEEE Trans. Appl. Supercond., 11. pp. 635-638.

Hao, L; Pedan, D A*; Macfarlane, J C*; Gallop, J C (2001) Characterisation of YBCO/Au/YBCO resistors for HTS Josephson noise thermometry. IEEE Trans. Instrum. Meas., 50. pp. 314-317.

Hao, L; Peden, D A*; Macfarlane, J C; Gallop, J C (2001) Tuneable HTS RF Josephson-effect oscillator based on YBCO-Au-YBCO resistive SQUID. Supercond. Sci. Technol., 14. pp. 1119-1123.

Harmon, S A C; Henderson, L C A (2001) Comparison of the Measurement of Current Transformers EUROMET Project 473. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Harris, P M; Lord, G J; Smith, I M; Robinson, S P (2001) The application of wavelets and other techniques to the calibration of underwater electroacoustic transducers in reverberant laboratory tanks. NPL Report. CMSC 11/01

Hart, A; Leach, R K (2001) Review of methods for cleaning surfaces prior to surface texture measurement as part of project LE9953, milestone 5.3.1.4. NPL Report. CBTLM 12

Head, D I (2001) Recent measurements of european deuterium cells at NPL. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Hekkenberg, R T*; Beissner, K*; Zeqiri, B; Bezemer, R A*; Hodnett, M (2001) Validated ultrasonic power measurements up to 20 W. Ultrasound Med. Biol., 27 (3). pp. 427-438.

Henderson, D; Lea, S N; Szymaniec, K; Whibberley, P B (2001) Towards a caesium fountain frequency standard at the NPL. In: Proceedings of the 15th European Frequency and Time Forum (EFTF), March 2001, Neuchatel, Switzerland.

Henderson, D; Lea, S N; Szymaniec, K; Whibberley, P B (2001) Towards a ceasium fountain frequency standard at the NPL. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Henson, A (2001) Improving dialogue in Europe between the regulatory bodies and the National Measurement Institutes through the RegMet project. In: NCSLI (National Conference of Standards Laboratories International Conference) 2001, 29 July - 2 August 2001, Washington D.C, USA.

Henson, A (2001) Improving dialogue in Europe between the regulatory bodies and the National Measurement Institutes through the RegMet project. In: Métrologie 2001 - 10th International Metrology Congress, 22-25 October 2001, Staint-Louis, France.

Hermier, Y*; Head, D I; Pitre, L*; Vergé, A*; Géneville, C*; Bonnier, G* (2001) A new generation of BNM INM MULTICOMPARMENT sealed cells for low temperature fixed points. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Hill, G J; Lees, K; Blackburn, J; Clarke, R N (2001) Investigation of the energy distribution in a re-entrant cavity. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Hobbs, C B (2001) Thermal Properties of light metal alloys by differential scanning calorimetry. NPL Report. MATC(MN)08

Hobbs, C B; Ferriss, D H; Roberts, S; Gnaniah, S J P; Brown, C S (2001) Thermal properties of polymer melts at elevated pressure from compression heating and differential scanning calorimetry. NPL Report. MATC(A)25

Hodnett, M; Zeqiri, B; Lee, N; Gélat, P N (2001) Report on the feasibility of establishing a reference cavitating medium - final project report. NPL Report. CMAM 58

Holland, K P; Hansen-Addy, J (2001) International comparison CCEM.RF-K7a.F (GT-RF-86-1) on electrical field strength - report on measurements at NPL. NPL Report. CETM 34

Holland, K P; Howes, J (2001) Recent RF and microwave mixer and power sensor measurements at the National Physical Laboratory. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Holland, P E; Woods, P T; Brookes, C; Uprichard, I J; Quincey, P; Robinson, R A; D'Souza, H; Milton, M J T; Goody, B; Bell, W; Alphonso, D (2001) The development of gas standards and calibration techniques for measurements of vehicle, aircraft and industrial emissions, natural gas, occupational exposure and air quality. Accred. Qual. Assur., 6 (3). pp. 120-129.

Humphreys, D A (2001) Assessment of optical spectrum analyser wavelength drift with temperature. In: OFMC'01 6th Optical Fibre Measurement Conference, 26-28 September 2001, Girton College, Cambridge, UK.

Humphreys, D A (2001) Synthesis of optical reference frequencies by four-wave mixing in optical fibre. In: OFMC'01 6th Optical Fibre Measurement Conference, 26-28 September 2001, Girton College, Cambridge, UK.

Humphreys, D A; Campbell, C (2001) Preliminary results of L-band exited-state optical frequency reference survey. In: OFMC'01 6th Optical Fibre Measurement Conference, 26-28 September 2001, Girton College, Cambridge, UK.

Hunt, C (2001) Development of surface insulation resistance measurements for electronic assemblies. NPL Report. MATC(A)70

Hunt, C (2001) Technology mission to assess the status of lead-free soldering in Japan. NPL Report. MATC(A)12

Hunt, R A; McCartney, L N (2001) Use of models to predict deformation during the elastic nano-indentation of coatings. NPL Report. MATC(A)45

I

Iles, R H A*; Jones, J B L*; Bentley, R D*; Hunter, R*; Taylor, G C; Thomas, D J; Harra, L K*; Coates, A J* (2001) The effect of solar particle events at aircraft altitudes. In: Proceedings of ESA Space Weather Workshop, December 2001.

Ipe, N E*; Rosser, K E; Moretti, C J; Manning, J W; Palmer, M J (2001) Air kerma calibration factors and chamber correction values for PTW soft x-ray, NACP and Roos ionization chambers at very low x-ray energies. Phys. Med. Biol., 46. pp. 2107-2117.

Ives, D J (2001) Measurement of polarisation dependent responsivity of optical fibre power meters and optical spectrum analysers. In: OFMC'01 6th Optical Fibre Measurement Conference, 26-28 September 2001, Girton College, Cambridge, UK.

J

Janssen, T J B M; Hartland, A (2001) Recent measurements of single electron transport in surface acoustic wave devices at the NPL. IEEE Trans. Instrum. Meas., 50 (2). pp. 227-230.

Janssen, T J B M; Williams, J M (2001) Controlling the laboratory using LabVIEW™. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Jennett, N M; McCartney, L N; Lawrence, K; Hunt, R; Maxwell, A; Koskinen, J*; Meneve, J*; Wegener, W*; Gibson, N*; Zhihui Xu*,, ; Bushby, A J*; Chudoba, T*; Cavaleiro, A*; Herrmann, K*; Consiglio, R*; Augereau, F*; Schneider, D* (2001) Indicoat Final Report Determination of hardness and modulus of thin films and coatings by nanoindentation. NPL Report. MATC(A)24

Jones, A*; Cox, M G (2001) Industrial methodology for uncertainty in quality and process improvement. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Jones, J B L*; Bentley, R D*; Hunter, R*; Taylor, G C; Thomas, D J (2001) The practical issues of utilising a European space weather programme for airline operations. In: Proceedings of ESA Space Weather Workshop, December 2001.

Jones, R G (2001) Measurements of the electrical conductivity of water. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Jones, R G; Clarkson, P; Wheaton, A J (2001) Methods of measuring current shunts. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

K

Kandil, F A (2001) Low cycle fatigue. VAMAS Bulletin, 24. p. 35.

Kandil, F A; Lord, J D; Fry, A T; Grant, P V (2001) A review of residual stress measurement methods - a guide to technique selection. NPL Report. MATC(A)04

Kelly, G (2001) Links to the INTErSECT Faraday Partnership - 3rd annual report from software support for metrology programme. NPL Report. CMSC 12/01

Kibble, B P (2001) Essay review - What is mass? Contemp. Phys., 42 (1). pp. 61-63.

Kleinschmidt, P; Patel, P; Williams, J M; Janssen, T J B M; Behr, R*; Kohlmann, J*; Niemeyer, J*; Hassel, J*; Seppa, H* (2001) Arbitary waveform synthesis using binary Josephson arrays. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Kleinschmidt, P; Williams, J M; Fletcher, N E; Janssen, T J B M (2001) A cryogenic current comparator for quantum Hall resistance ration measurements. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Knight, D A; Alexander, M J (2001) Monopole calibrations in a GTEM cell. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Knott, A J (2001) CIPM 10kN key comparison. NPL results. NPL Report. CMAM 67

L

Law, A; Leach, R K (2001) Use of a polymer film bridge to measure the contact force applied by instruments used in the measurement of surface textures. NPL Report. CBTLM 14

Lea, C (2001) Lead-ing lead-free. Global SMT and Packaging, 1 (1). pp. 3-4.

Lea, C (2001) New thoughts on SIR: underpinning standards with science. Global SMT & Packaging, 1 (4). p. 8.

Lea, C (2001) Optimism in pre-competive research. Global SMT & Packaging, 1 (3). 8, 14.

Lea, C (2001) Traceability of decision making. Global SMT & Packaging, 1 (2). pp. 18-19.

Lea, D; Dusek, M; Jonck, F; Hunt, C (2001) Solderability of electrical components and copper using lead-free alloys. NPL Report. CMMT(A)284

Lea, D; Jonak, F; Hunt, C (2001) Solderability measurements of PCB pad finishes and geometries. NPL Report. MATC(A)3

Lea, S N; Huang, G; Margolis, H S; Gill, P (2001) Femtosecond laser combs for optical measurement at NPL. In: 15th European Frequency and Time Forum., 2001.

Leach, R K (2001) Current problems in the field of surface texture measurement. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Leach, R K (2001) NanoSurf IV: Traceable measurement of surface texture at the National Physical Laboratory, UK. Int. J. Mach. Tools Manuf. (UK), 41 (13-14). pp. 2113-2121.

Leach, R K (2001) A recent comparison of stylus and optical methods for measuring surface texture. In: 9th IMEKO Symposium Metrology for Quality Control in Production; Surface Metrology for Quality Assurance., 24-27 September 2001, Cairo, Egypt.

Leach, R K; Blunt, L*; Chetwynd, D G*; Yacoot, A (2001) The need for a metrology infrastructure to support nanotechnology. In: Proceedings of the 5th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII), 25-29 September 2001, Cairo, Egypt.

Leach, R K; Garbutt, I; Cox, M G (2001) Sinusoidally modulated reference artefacts for calibration of surface texture measuring instruments. In: Proceedings of 2nd European Society for Precision Engineering and Nanotechnology (Euspen) International Conference, 27-31 May 2001, Turin, Italy.

Leach, R K; Garbutt, I; Harris, P; Cox, M G (2001) Production, measurement and analysis of sinusoidal artefacts for calibration of surface texture measuring instruments. NPL Report. CBTLM 7

Leach, R K; Hart, A (2001) Investigation into the shape of diamond styli used for surface texture measurement. NPL Report. CBTLM 10

Leach, R K; Haycocks, J; Jackson, K; Lewis, A; Oldfield, S; Yacoot, A (2001) Advances in traceable nanometrology at the National Physical Laboratory. Nanotechnology, 12. R1-R6.

Lee, R A M*; Macfarlane, J C*; Romans, E*; Hao, L; Peden, D*; Gallop, J C (2001) Quantum roulette noise thermometer: progress and prospects. IEEE Trans. Appl. Supercond., 11. pp. 859-862.

Liang, W L; Loader, B G; Alexander, M J; Torihata, S*; Kobayashi, H* (2001) The fully integrated miniaturised optical electric field sensor. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Lodeiro, M J (2001) Investigation of PMC interface properties using the single-fibre fragmentation technique. NPL Report. MATC(A)16

Lodeiro, M J (2001) Single-fibre fragmentation test for the characterisation of interfacial phenomena in PMCs. NPL Report. MATC(MN)07

Lord, J D; Bennett, E G (2001) Isothermal fatigue testing of particulate metal matrix composites. NPL Report. MATC(MN)05

Lord, J D; Loveday, M S (2001) Tools and lubricants for high temperature metalworking laboratory-scale tests. NPL Report. CMMT(MN)050

Lord, J D; Roebuck, B; Gnaniah, S J P; Sims, G D (2001) European thematic network - MNC assess. Technical Report. MATC(MN)01

Loveday, M S (2001) High temperature flow stress measurements: Quality and traceablity issues. NPL Report. CMMT(MN)062

Loveday, M S; Brooks, M (2001) Consideration of high temperature friction measurement uncertainty. NPL Report. CMMT(MN)070

Loveday, M S; Brooks, M (2001) High temperature friction: a simplified approach for estimating uncertainty of measurement. NPL Report. CMMT(A)305

Loveday, M S; Collins, A*; Hall, R* (2001) A West Midlands Advanced Metal Forming Centre. NPL Report. MATC(A)42

Lowe, D; Machin, G (2001) Development of metal carbon eutectic blackbody cavities to 2500 ºC at NPL. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Ludwig, A*; Quested, P N; Neuer, G (2001) How to find thermophysical material property data for casting simulations. Advanced Engineering Materials, 3 (1-2). pp. 11-14.

M

Machin, G; Sergienko, R* (2001) A comparative study of size of source effect (SSE) determination techniques. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Machin, G; Yamada, Y*; Lowe, D; Sasajima, N*; Sakuma, F*; Fan Kai*, (2001) A comparison of metal-carbon eutective blackbody cavities of rhenium, iridium, platinum and palladium between NPL and NMIJ. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Maddock, M J (2001) Improvements in national standard S-parameter measurements in rectangular waveguide at millimetre-wave frequencies. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Maddock, M J*; Ridler, N M (2001) ANAMET-991: TDNA measurement comparison exercise. Technical Report.

Martinsons, C*; Levick, A P; Edwards, G J (2001) Precise measurements of thermal diffusivity by photothermal radiometry for semi-infinite targets using accurately determined boundary conditions. Anal. Sci., 17 (Specia). S114-S117

Maxwell, A S (2001) Practical guide for designers and manufacturers of mouldings to reduce the risk of environment stress cracking. NPL Report. MATC(A)5

Maxwell, A S (2001) Review of test methods for coating adhesion. NPL Report. MATC(A)49

McCartney, L N (2001) Model of composite degradation due to environmentally assisted fatigue damage. NPL Report. MATC(A)26

McCartney, L N (2001) Simulation of progressive damage formation and failure during the loading of cross-ply composites. NPL Report. MATC(A)20

McEwen, M R; Duane, S; Thomas, R A S; Rosser, K E (2001) The role of the National Physical Laboratory in monitoring and improving dosimetry in UK radiotherapy. In: International Conference on Medical Physics, 2001.

McEwen, M R; Williams, A J; DuSautoy, A R (2001) Determination of absorbed dose calibration factors for therapy level electron beam ionization chambers. Phys. Med. Biol., 46 (3). pp. 741-755.

Mendels, D A (2001) Analysis of the single-fibre fragmentation test. NPL Report. MATC(A)17

Mera, R D; Sims, G D (2001) Opportunities for composites in the energy industry. NPL Report. MATC(A)64

Miall, J (2001) Calibration history of waveguide thermistor power standards in the UK. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Miles, I*; Jarvis, D (2001) Nanotechnology a scenario for success in 2006. NPL Report. CBTLM 16

Milton, M J T; Brookes, C; Marschal, A*; Guenther, F*; de Leer, E*; Zhen, W L*; Takahashi, C*; Deak, E*; Kustikov, Y* (2001) Final report of key comparison CCQM-K4 (ethanol in air). NPL Report. COEM 59

Milton, M J T; Holland, P E; Davenport, A J; Brookes, C; Woods, P T (2001) Sources of uncertainty in the gravimetric preparation of a binary gas standard on a twin-pan balance. NPL Report. COEM 60

Milton, M J T; Marschal, A* (2001) Frequently-asked questions about primary methods of measurement in chemical analysis. Accred. Qual. Assur., 4. pp. 270-271.

Milton, M J T; Quinn, T J* (2001) Primary methods for the measurement of amount of substance. Metrologia, 38. pp. 289-296.

Modna, D K; Baker, M; Bass, G A; Woods, M J (2001) Comparison of 192Ir brachytherapy source measurements in UK hospitals, 2000. NPL Report. CIRM 44

Morrell, R (2001) Mechanical tests for advanced technical ceramics - development of standardised procedures. Nondestruct. Test. Eval., 17 (4-5). pp. 299-314.

Mulligan, D R; Brown, C S; Fry, A; Percio, S (2001) Effect of pressure on thermal conductivity of polymers. NPL Report. MATC(A)33

Mulligan, E; Griffiths, A J; Nimmo, W (2001) When welds corrode. Mater. World (Dec). pp. 27-28.

N

Nimmo, W; Griffiths, A J; Orkney, L P; Mensah, A; Turnbull, A (2001) Evaluation of techniques for measuring the corrosion activity of carbon steel welds. NPL Report. MATC(A)34

Nimmo, W; Orkney, L P; Mensah, A; Griffiths, A J (2001) Assessing the corrosion susceptibility of carbon steel welds - evaluating the test methods. Weld. Met. Fabr. (UK) (June). pp. 12-14.

Nottay, J; Dusek, M; Hunt, C; Bailey, C*; Lu, H* (2001) Creep properties of SnAgCu solder in surface mount assemblies. NPL Report. MATC(A)51

Nottay, J; Dusek, M; Wickham, M; Hunt, C (2001) Reworking solder alloy mixtures of lead-free and tin-lead alloys. NPL Report. MATC(A)73

Nutbrown, R F; McEwen, M R; Thomas, R A S; Duane, S; Shipley, D R (2001) Comparison of conversion factors for x-ray beams from Philips SL15 and the NPL linear accelerator. Phys. Med. Biol., 46. N245-N252

O

Osgerby, S; Saunders, S R J; Mulligan, E (2001) Corrosion issues at high temperature. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

P

Pakes, C I*; Josephs-Franks, P W; Reed, R P; Corner, S G*; Colclough, M S* (2001) Development of miniature DC SQUID devices for the detection of single atomic spin-flips. IEEE Trans. Instrum. Meas., 50 (2). pp. 310-313.

Patel, P; Awan, S A (2001) Portable capacitance standards. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Patel, P; Williams, J M; Janssen, T J B M (2001) A programmable bias source for binary Josephson junction arrays. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Pavese, F*; de Groot, M*; Fellmuth, B*; Head, D I; Hermier, Y*; Szmyrka-Grazebyk, A*; Zanin, L* (2001) The project 'MULTICELLS' for the development of new temperature standards in the cryogenic range down to 2.18 K by means of sealed cells. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Payne, R C; Simmons, D (2001) Assessment of sound power levels and associated measurement uncertainties of construction equipment. NPL Report. CMAM 65

Peden, D A*; Hao, L; Lee, R A M*; Gallop, J C; Macfarlane, J C* (2001) Temperature dependence of Josephson linewidth for resistively shunted double junction HTS SQUID. IEEE Trans. Appl. Supercond., 11. pp. 1215-1218.

Petley, B W (2001) The Planck constant. Proceedings of the International School of Physics "Enrico Fermi", 146. pp. 157-176.

Petley, B W (2001) The fundamental constants and metrology. Proceedings of the International School of Physics "Enrico Fermi", 146. pp. 121-145.

Petley, B W (2001) The fundamental constants and physics. Proceedinds of the International School of Physics "Enrico Fermi", 146. pp. 93-120.

Pickering, J R*; Wright, P S (2001) An AC voltage standards based on a 1-bit current steering DAC. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Pottinger, M*; Woods, M J; Keightley, L (2001) The examination, testing and calibration of installed radiation protection instruments. Measurement Good Practice Guide. 29

Preston, R C; Shaw, A (2001) Recommended ultrasound field safety classification for medical diagnostic devices. Measurement Good Practice Guide. 50

R

Read, B E; Dean, G D; Wright, L* (2001) Effects of cavity growth and orientation hardening on the stress.strain behaviour of rubber-toughened plastics. NPL Report. MATC(A)35

Richardson, D (2001) Government Owned Contractor Operated - the NPL outsourcing experience. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Rides, M; Allen, C R G (2001) Effect of die geometry on shear viscosity and entrance pressure drop determination by capillary extrusion rheometry. NPL Report. MATC(A)56

Rides, M; Allen, C R G (2001) High rate extensional rheometry of polymer melts. NPL Report. MATC(A)71

Rides, M; Allen, C R G; Dawson, A (2001) Improved testing using the melt flow rate instrument - multi-rate and extensional flow measurements. NPL Report. MATC(A)28

Ridler, N M (2001) Evaluating and expressing uncertainty in complex S-parameter measurements. In: ARFTG/NIST Measurements Short Course on RF Measurements for Wireless World, 27-28 November 2001, San Diego, CA, USA.

Ridler, N M; Salter, M J (2001) Propagating S-parameter uncertainties to other measurement quantities. In: 58th Automatic RF Techniques Group (ARFTG) Conference, 29-30 November 2001, San Diego, USA.

Ridler, N M; Salter, M J; Young, P R (2001) An interpolation scheme for precision reflection coefficient measurements at intermediate frequencies. Part 2: practical implementation. In: IMTC 2001 - Proceedings of the 18th IEEE Instrumentation and Measurement Technology Conference, 21-23 May 2001, Budapest, Hungary.

Roberts, N J (2001) MCNP calculations of correction factors for radionuclide neutron source emission rate measurements using the manganese bath. NPL Report. CIRM 45

Roebuck, B (2001) Miniature multiproperty tests at elevated temperatures. Metallurgia, 68 (7). pp. 9-11.

Roebuck, B (2001) Miniature testpiece for the assessment of the dimensional stability of monolithic and metal composite aluminium alloys. NPL Report. CMMT(MN)069

Roebuck, B (2001) Thermal exposure of monolithic and metal composite aluninium alloys. NPL Report. CMMT(A)295

Roebuck, B; Bennett, E G (2001) Ultrafine grained hardmetals grain size and distribution. NPL Report. MATC(MN)03

Roebuck, B; Bennett, E G; Gee, M G; Stewart, M S (2001) A scanning depth sensing hardness test system to characterise hardmetals. In: 15th Plansee Seminar, 28 May - 1 June 2001, Reutte, Austria.

Roebuck, B; Cox, D*; Reed, R (2001) Measurement of the temperature dependance of ` volume fraction in Ni-based single crystal superalloy from resistivity measurements. Scr. Mater., 44 (6). pp. 917-921.

Roebuck, B; Gee, M G; Morrell, R (2001) Hardmetals - microstructural design, testing and property maps. In: 15th Plansee Seminar, June 2001, Reutte, Austria.

Roebuck, B; Morrell, R (2001) Microstructure-property relationships for ultrafine grained materials. Metallurgia (August). pp. 8-9.

Roebuck, B; Orkney, L P; Lord, J D (2001) Validation of a miniature tensile strength measurement system. ASTM Spec. Tech. Publ., 1418. pp. 234-250.

Roebuck, B; Stewart, M; Morrell, R; Gee, M G (2001) Mapping hardness. Mater. World (Novemb). pp. 16-17.

Roebuck, B; Stewart, M; Morrell, R; Gee, M G; Plint, G* (2001) Mapping hardness using automated depth sensing process. Surf. Eng., 17 (6). pp. 447-449.

Rusby, R L; Cousins, D; Head, D I; Mohandas, P; Godfrin, H*; Bunkov, Y M*; Bäuerle, C*; Harakaly, R*; Collin, E*; Triqueneaux, S*; Lusher, C*; Li, J*; Saunders, J*; Cowen, B*; Nyéki, J*; Digby, M*; Pekola, J*; Gloos, K*; Hernandez, P*; de Groot, M*; Peruzzi, A*; Jochemsen, R*; Chinchure, A*; Bosch, W*; Mathu, F*; Flokstra, J*; Veldhuis, D*; Hermier, Y*; Pitre, L*; Vergé, A*; Benhalima, F*; Fellmuth, B*; Engert, J* (2001) Dissemination of the ultra-low temperature scale, PLTS-2000. In: TEMPMEKO 01, June 2001, Berlin, Germany.

S

Sadli, M*; Machin, G; Lowe, D; Hartmann, J*; Morice, R* (2001) Realisation and comparison of metal-carbon eutectic points for radiation thermometry applications and W-Re thermocouple calibration. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Salmon, D R (2001) Thermal conductivity of insulations using guarded hot plates, including recent developments and sources of reference materials. Meas. Sci. Technol., 12 (12). R89-R98

Salmon, D R; Tye, R* (2001) An inter-comparison of guarded hot plate and heat flow meter apparatus within the United Kingdom and Ireland. NPL Report. CBTLM 8

Saunders, S R J (2001) Hardness measurements. In: Metrology and Properties of Engineering Surfaces. Kluwer Academic Publishers, pp. 305-322. ISBN 0412806401

Saunders, S R J; Banks, J P (2001) Development of a test procedure for the measurement of thermal fatigue resistance of coatings. NPL Report. MATC(A)61

Saunders, S R J; Banks, J P; Chunnilall, C J (2001) An evaluation of tests for the adhesion of thermal barrier coatings. NPL Report. MATC(A)59

Saunders, S R J; Banks, J P; Wright, M (2001) Measurement of ductile brittle transition temperature of coatings using the small punch test. NPL Report. MATC(A)60

Seah, M P (2001) Background subtraction III: the application of REELS data to background removal in AES and XPS. Surf. Sci., 471. pp. 185-202.

Seah, M P (2001) Summary of ISO/TC 201 standard: VII ISO 15472:2001 - Surface chemical analysis - X-ray photoelectron spectrometers - Calibration of energy scales. Surf. Interface Anal., 31. pp. 721-723.

Seah, M P (2001) Summary of ISO/TC 201 standard: VIII, ISO 18115:2001 - Surface chemical analysis - vocabulary. Surf. Interface Anal., 31. pp. 1048-1049.

Seah, M P; Gilmore, I S (2001) Simplified equations for correction parameters for elastic scattering effects for Q, ß and attenuation lengths in AES and XPS. Surf. Interface Anal., 31. pp. 835-846.

Seah, M P; Gilmore, I S; Spencer, S J (2001) Quantitative AES IX and quantitative XPS II: Auger and X-ray photoelectron intensities and sensitivity factors from spectral digital databases re-analysed using a REELS database. Surf. Interface Anal., 31. pp. 778-795.

Seah, M P; Gilmore, I S; Spencer, S J (2001) Quantitative AES IX and quantitative XPS II: Auger and X-ray photoelectron intensities from elemental spectra in digital databases reanalysed with a REELS database. Surf. Interface Anal., 31. pp. 778-795.

Seah, M P; Gilmore, I S; Spencer, S J (2001) Quantitative XPS I: analysis of X-ray photoelectron intensities from elemental data in a digital photoelectron database. J. Electron Spectrosc. Relat. Phenom., 120 (1-3). pp. 93-111.

Sephton, J P; Sharpe, P H G; Chu, R D H* (2001) The use of ionisation chambers for dose rate measurements at industrial irradiation plants. In: IMRP 2001, March 2001.

Sharpe, P H G S (2001) Progress report on radiation dosimetry at NPL. Technical Report. BIPM.

Sievert, J*; Ahlers, H*; Fiorillo, F*; Rocchino, L*; Hall, M J; Henderson, L C A (2001) Magnetic measurements on electrical steels using Epstein and SST methods. Technical Report. PTB, Germany.

Sims, G D (2001) Polymer composites. VAMAS Bulletin, 24. pp. 31-32.

Sims, G D; Bishop, G* (2001) Foresight study and competitive analysis. NPL Report. MATC(A)80

Sinclair, A G; Wilson, M A; Gill, P (2001) Improved three-dimensional control of a single strontium ion in an endcap trap. Opt. Commun., 190. pp. 193-203.

Sinclair, M W; Sharpe-Neale, P H W; Wait, D F*; Erard, L*; Buchholz, F I*; Somlo, P I*; Dexiong, X* (2001) International comparison CCEM.RF-K2.W (GT-RF-78-13) on noise power in IEC-R100 waveguide - final report. NPL Report. CETM 35

Smith, D; Woods, M J; Woods, D H (2001) Results from the 237Np exercise. EUROMET action 416. NPL Report. CIRM 43

Smith, F C*; Thompson, R P; Liang, W L; Clarke, R N; Lederer, P G* (2001) Measurement of electromagnetic surface waves using an optically modulated scatterer. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Smith, F C*; Thompson, R P; Liang, W L; Clarke, R N; Lederer, P G* (2001) On the prediction and measurement of the electromagnetic fields close to a coated diffracting edge at grazing incidence. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Stevens, R F; Davies, N*; Milnethorpe, G* (2001) Lens arrays and optical system for orthoscopic 3D imaging. Imaging Sci. J., 49. 151 - 164

Stewart, M; Battrick, W; Cain, M G (2001) Measuring piezoelectric d33 coefficents using the direct method. Measurement Good Practice Guide. 44

Stewart, M; Cain, M G (2001) NMW0403: optical sensor characterisation and calibration device for integrated optical systems. NPL Report. MATC(A)57

T

Tagziria, H; Roberts, N; Bennett, A; Thomas, D J (2001) Calibration and Monte Carlo modelling of the NPL long counters at 22.8 keV. NPL Report. CIRM 48

Taylor, P; Webster, S A; Roberts, M; Rowley, W R C; Barwood, G P; Gill, P (2001) Progress towards a single ytterbium ion optical clock. Proc. SPIE - Int. Soc. Opt. Eng., 4269. pp. 155-169.

Thomas, D J (2001) NPL contribution to an international comparison of 24.5 keV neutron fluence measurements. NPL Report. CIRM 46

Tomlins, P E; Nottay, J (2001) A method to measure the adhesive strength of glob tops to substrates. NPL Report. MATC(A)6

Tomlins, P E; Smith, I; Bartlett, P* (2001) The influence of nucleating agents on the dimensional stability of pigmented mouldings. NPL Report. MATC(A)63

Turnbull, A (2001) Challenges in characterizing the crack-tip environment as a basis for prediction of crack growth kinetics. In: 10th International Conference on Fracture (ICF 10), 2-6 December 2001, Hawaii.

Turnbull, A (2001) Enviornment assisted cracking of metals - engineering challenges. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Turnbull, A (2001) Modelling of the chemistry and electrochemistry in cracks - a review. Corrosion, 57 (2). pp. 175-189.

Turnbull, A; Coleman, D; Griffiths, A J (2001) Assessment of methods for evaluating the effectiveness of corrosion inhabitors in retarding propagation of localised corrosion. Br. Corros. J., 36 (3). pp. 210-214.

Turnbull, A; Zhou, S (2001) Environment assisted cracking of steam turbine steels - modelling of crack electrochemistry. In: Corrosion 2001, March 2001.

Tyler, D K; Woods, M J; Jerome, S M; Harms, A V (2001) Thorium in the workplace - results from a European-based measuremet comparison project. Radiat. Prot. Dosim., 97. pp. 141-152.

V

van der Ham, E W M*; Battuello, M*; Bloembergen, P*; Bosma, R*; Clausen, S*; Enouf, O*; Filipe, E*; Fischer, J*; Gutschwager, B*; Hirvonen, T*; Machin, G (2001) Intercomparison of local temperature scales with transfer standard radiation thermometers between -50 ºC and 800 ºC. In: TEMPMEKO 01, June 2001, Berlin, Germany.

W

Walker, B; Jones, T; Wells, D S (2001) Group index variations in single-mode optical fibres. NPL Report. COAM 1

Wallard, A J (2001) Successful contractorisation - the experience of the National Physical Laboratory. In: Government Laboratories Transition and Transformation. IOS Press, pp. 202-207. ISBN 1586030469

Webster, G A*; Holdsworth, S R*; Loveday, M S; Perrin, I J*; Purper, H* (2001) A code of practice for conducting notched bar creep rupture tests and for interpreting the data. Technical Report. High Temperature Mechanical Testing Committee.

Weyland, K*; Simon, E*; Henderson, L C A; Bartholomew, J G; Teunisse, G M*; Blanc, I*; Crotti, G*; Kupec, J*; Jeglic, A*; Gersak, G*; Humar, J*; Puranen, L O* (2001) International comparison of magnetic flux density by means of field coil transfer standards. Metrologia, 38. pp. 187-191.

White, H M (2001) The measurement of appearance. Product Finishing, 54 (1). pp. 17-18.

Wichmann, B A (2001) Software validation. In: Calibration in the Pharmaceutical Laboratory. IHS Health Group, pp. 101-155. ISBN 1574910922

Wickham, M; Lea, D; Nottay, J; Hunt, C (2001) Processability of lead-free component termination materials. NPL Report. MATC(A)47

Wickham, M; Nottay, J; Hunt, C (2001) A review of mechanical test method standards for lead-free solders. NPL Report. MATC(A)69

Wickham, M J; Hunt, C P (2001) Thermal profiling of electronic assemblies. NPL Report. MATC(A)50

Wicks, M J; Niemi, T*; Ludvigsen, H*; Wegmüller, M*; de Riedmatten, H*; Gisin, N* (2001) Preliminary results of a European intercomparison of group delay measurements of fibre Bragg gratings. In: OFMC'01 6th Optical Fibre Measurement Conference, 26-28 September 2001, Girton College, Cambridge, UK.

Woods, S A; Tyler, D K; Woods, M J; Jerome, S M (2001) Nuclear data used in the analysis of thorium in the workplace. Radiat. Prot. Dosim., 97. pp. 133-136.

Woolley, A M; Butterfield, D M; Sweeney, B P (2001) London Air Quality Network: Ratification report for January to June 2001. NPL Report. COAM 3

Woolley, A M; Butterfield, D M; Sweeney, B P (2001) UK Automatic Rural Network: ratification report for January to June 2001. NPL Report. COAM 4

Wright, P S; Clarkson, P (2001) Methods for the calibration of flickermeters. In: BEMC 2001- 10th British Electromagnetic Measurement Conference, 6-8 November 2001, Harrogate, UK.

Y

Yacoot, A; Kuetgens, U*; Koenders, L*; Weimann, T* (2001) A combined scanning tunnelling microscope and x-ray interferometer. Meas. Sci. Technol., 12. pp. 1660-1665.

Z

Zhou, S; Coleman, D; Turnbull, A (2001) Application of neural networks to predict sulphide stress corrosion cracking of duplex stainless steels. NPL Report. MATC(A)21

Zhou, S; Coleman, D; Turnbull, A (2001) Development of neural networks to predict general corrosion of duplex stainless steels. NPL Report. MATC(A)22

Zhou, S; Turnbull, A (2001) Environment assisted cracking of steam turbine disc and blade steels - description of test procedure and preliminary results. NPL Report. MATC(A)41

Zhukov, A A*; Cohan, L F*; Yates, K*; Perkins, G K*; Bugoslavsky, Y*; Polichetti, M*; Berenoc, A*; Macmanus Driscoll, J L*; Caplin, A D*; Hao, L; Gallop, J C (2001) Microwave surface resistance in MgB2. Supercond. Sci. Technol., 14. L13-L16

Zhukov, A A*; Cohen, L F*; Yates, K*; Perkins, G K*; Bugoslavsky, Y*; Polichetti, M*; Bernov, A*; Macmanus Driscoll, J L*; Caplin, A D*; Hao, L; Gallop, J C (2001) Microwave surface resistance in MgB2. Supercond. Sci. Technol., 14. L13-L16

Zou, L; Dusek, M; Wickham, M; Hunt, C (2001) Fine pitch stencil printing using enclosed printing systems. NPL Report. MATC(A)09

Zou, L; Dusek, M; Wickham, M; Hunt, C (2001) The effect of metal content and flux chemistry on fine pitch stencil printing performance using an enclosed print head. NPL Report. MATC(A)10

Zou, L; Dusek, M; Wickham, M; Hunt, C (2001) The effect of solder alloy, metal particle size and substrate resist on fine pitch stencil printing performance. NPL Report. MATC(A)18

This list was generated on Thu Nov 14 10:25:49 2019 GMT.