< back to main site

Publications

Items where Year is 2002

Up a level
Export as [feed] RSS
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | Q | R | S | T | U | W | Z
Number of items: 260.

A

Abu Bakar, M*; Velichko, A V*; Lancaster, M J*; Porch, A*; Gallop, J C; Hao, L; Cohen, L F*; Zhukov, A* (2002) Microwave intermodulation distotion measurements in unpatterned and patterned YBCO thin film. Physica C, 372-37 (2). pp. 692-695.

Adams, S M*; Hunt, C; Lea, D (2002) Wetting balance evaluations of the solderability of lead-free solders. In: European Microelectronics Packaging and Interconnection Symposium. IMAPS Europe, 16-18 June 2002, Cracow, Poland.

Alexander, M J (2002) International comparison CCEM.RF-K7.B.F of antenna factors in the frequency range 30 MHz to 1 GHz. Metrologia, 39 (3). pp. 309-317.

Arnaut, L R (2002) Adaptive control of electromagnetic scattering using self-adaptive material systems. In: Bianisotropics 2002 - 9th International Conference on Electromagnetics of Complex Media, 8-11 May 2002, Marrakech, Morocco.

Arnaut, L R (2002) Compound exponential distribution for undermoded reverberation chambers. IEEE Trans. Electromagn. Compat., 44 (3). pp. 442-457.

Arnaut, L R (2002) Self-adaptive material systems. In: Advances in Electromagnetics of Complex Media and Metamaterials. Kluwer, Dordrecht, Netherlands, pp. 421-438.

Arnaut, L R; Rochard, O C (2002) Distributions of field magnitude and energy density in undermoded mode-tuned reverberation chambers. In: 5th European Symposium on EMC, 9-13 September 2002, Sorrento, Italy.

Awan, S A; Jones, R G; Kibble, B P (2002) A re-evaluation of NPL coaxial bridge systems used in the realization of SI farad via the DC QHE. In: 2002 Conference on Precision Electromagnetic Measurements (CPEM), 16-21 June 2002, Ottawa, Canada.

B

Baker, M; Bass, G A; Woods, M J (2002) Calibration of the NPL secondary standard radionuclide calibrator for 125I seeds used for prostate brachytherapy. Appl. Radiat. Isot., 56 (1-2). pp. 321-325.

Barwood, G P; Gill, P; Huang, G; Klein, H A (2002) Stability and reproducibility of an optical frequency standard based upon the 2S1/2 - 2D5/2 transition in 88Sr+. In: Proceedings of the 6th Symposium on Frequency Standards and Metrology, 9-14 September 2001, University of St Andrews, Fife, Scotland, UK.

Bayliss, D J (2002) Measurement of the volume of a Zerodur sphere of nominal mass 1 kg by comparison hydrostatic weighing with Zerodur and silica standards of similar nominal mass. NPL Report. CMAM 80

Bayliss, D J; Severn, I (2002) The traceability of density measurements via solid density reference standards using the NPL 1 kg hydrostatic weighing apparatus. NPL Report. CMAM 66

Beamiss, G A; Robinson, S P; Hayman, G; Esward, T J (2002) Determination of the variation in free-field hydrophone response with temperature and depth. Acta Acust. - Acustica, 88 (5). pp. 799-802.

Beauvais, D; Henson, A (2002) An analysis of the calibration and measurement capabilities from the National Metrology Institutes under the CIPM Mutual Recognition Arrangement; how do the Laboratories compare? Is this what users want? In: NCSL 2002 International Conference Proceedings, 2002, San Diego, USA.

Bell, S A; Gardiner, T; Stevens, M; Waterfield, K* (2002) Evaluation of trace moisture sensors - interim report. NPL Report. CBTLM 19

Bennett, E G (2002) Measurement routines for microstructural analysis by image analysis. NPL Report. MATC(MN)26

Bennett, E G; Gant, A (2002) Extended field microscopy and image analysis of porosity in PM steels. NPL Report. MATC(MN)35

Brewin, A; Hunt, C; Dusek, M; Nottay, J (2002) Reliability of joints formed with mixed alloy solders. NPL Report. MATC(A)85

Brewin, A; Zou, L; Hunt, C (2002) Development of new solderability test fluxes. NPL Report. MATC(A)122

Brewin, A; Zou, L; Hunt, C (2002) Test method for dispensing electronic process materials. NPL Report. MATC(A)86

Brewin, A; Zou, L; Hunt, C (2002) Test procedure for process validation with surface insulation resistance. NPL Report. MATC(A)121

Broughton, W R; Crocker, L E; Gower, M R L (2002) Design requirements for bonded and bolted composite structures. NPL Report. MATC(A)65

Broughton, W R; Lodeiro, M J (2002) Review of surface characterisation techniques for adhesive bonding. NPL Report. MATC(A)66

Broughton, W R; Lodeiro, M J; Shaw, R M; Arranz, E; Gnaniah, S J P (2002) Assessment of surface characterisation techniques for adhesive bonds. NPL Report. MATC(MN)24

Brown, R J C; Brewer, P; Milton, M J T (2002) The physical and chemical properties of electroless nickel phosphorus alloys and low reflectance nickel phosphorus black surfaces. Journal of Materials Chemistry, 12 (9). pp. 2749-2754.

Buck, R P*; Rondinini, S*; Covington, A K*; Baucke, F G K*; Brett, C M A*; Camoes, M F*; Milton, M J T; Mussini, T*; Naumann, R*; Pratt, K W*; Spitzer, P*; Wilson, G S* (2002) Measurement of pH. Definition, standards and procedures (IUPAC Recommendations 2002). Pure Appl. Chem., 74 (11). pp. 2169-2200.

C

Cain, M G (2002) Performance related properties for electroceramics. VAMAS Bulletin, 25. pp. 44-46.

Cain, M G; Lodeiro, M J; Stewart, M; Theobalds, M (2002) 6MPI0301: Losses in piezoelectric materials. NPL Report. MATC(A)126

Cain, M G; Stewart, M (2002) Measurement of the surface displacement in 1-3 piezo-composites. NPL Report. MATC(A)94

Chakravorty, S (2002) An assessment of polymer nano-composite materials. NPL Report. MATC(A)123

Chetwynd, D G*; Leach, R K (2002) Dynamic performance of a cantilever-based topography. In: 3rd Internation Conference of the European Society for Precision Engineering and Nanotechnology (euspen), 26-30 May 2002, Eindhoven, The Netherlands.

Chetwynd, D*; Howell, G*; Leach, R K (2002) Evaluation of the dynamic performance of a glass cantilever style constant force probe for the measurement of surface texture. NPL Report. CBTLM 23

Clarke, F J J; Birch, J R; Chunnilall, C J; Smart, M P (2002) FTIR measurements - standards and accuracy. Vib. Spectrosc., 30 (1). pp. 25-9.

Clarke, P J; Hanson, A R (2002) Determination and correction of errors in surface colour measurement. Proc. SPIE - Int. Soc. Opt. Eng., 4421. pp. 803-807.

Clarke, P J; Hanson, A R (2002) Harmonization of scales of color measurement. Proc. SPIE - Int. Soc. Opt. Eng., 4421. pp. 794-797.

Cohen, L F*; Cowie, A L*; Purnell, A*; Lindop, N A*; Thiess, S*; Gallop, J C (2002) Thermally induced nonlinear behaviour of HTS film at high microwave power. Supercond. Sci. Technol., 15. pp. 559-565.

Cox, M G (2002) The evaluation of key comparison data. Metrologia, 39. pp. 589-595.

Cox, M G; Harris, P M; Kenward, P D (2002) Fixed- and free-knot univariate least-squares data approximation by polynomial splines. NPL Report. CMSC 13/02

Cox, M G; Harris, P M; Milton, M J T; Woods, P T (2002) Method for evaluating trends in ozone concentration data and its application to data from the UK Rural Ozone Monitoring Network. NPL Report. CMSC 15/02

Crawshaw, A H; Robinson, A D (2002) The calibration of force transducers 'on-the-fly'. NPL Report. CMAM 86

Crocker, L E; Broughton, W R (2002) Geometric and material property effects on the performance of adhesive T-joints. NPL Report. MATC(MN)29

D

Davies, R H; Dinsdale, A T; Gisby, J A; Robinson, J A J; Martin, S M (2002) MTDATA - thermodynamic and phase equilibrium software from the National Physical Laboratory. CALPHAD Comput. Coupling Phase Diagr. Thermochem., 26 (2). pp. 229-271.

Dawson, L*; Clegg, J*; Porter, S J*; Dawson, J F*; Alexander, M J (2002) The use of genetic algorithms to maximize the performance of a partially lined screened room. IEEE Trans. Electromagn. Compat., 44 (1). pp. 233-242.

Dean, G; Mera, R D; Arranz, E (2002) Determination of the properties of plastics at high strain rates. NPL Report. MATC(A)116

Dean, G; Read, B; Wright, L (2002) A comparison of the data requirements and predictive accuracy of the cavitation model and a simple model for non-linear behaviour in finite element systems. NPL Report. MATC(A)120

Dean, G; Read, B E; Wright, L (2002) A further evaluation of the cavitation model for rubber-toughened plastics. NPL Report. MATC(A)75

Dean, G; Wright, L (2002) Analysis of failure tests on uniaxial tensile and plate specimens of ABS. NPL Report. MATC(A)88

Dean, G; Wright, L (2002) Comparison of the measured and predicted deformation of a circular plate of an ABS polymer used under centre loading. NPL Report. MATC(A)105

Dean, G D; Broughton, W R (2002) Models for predicting deformation and failure in adhesives and polymer matrix composites. NPL Report. MATC(A)68

Delehaye, F*; Awan, S A (2002) Bilateral comparison of 10 pF and 100 pF capacitance standards between the NPL and the BIPM. Technical Report. BIPM, France.

Dudley, R A; Morgan, A G; Ridler, N M (2002) iPIMMS - an Internet-based calibration and measurement service for vector network analysis. In: Automated RF and Microwave Measurements Society (ARMMS) Meeting - Conference Digest, 22-23 April 2002, Corby, Northamptonshire, UK.

Dusek, M; Hunt, C (2002) Assessment of rheological properties of materials used in printing of solder paste. NPL Report. MATC(A)76

Dusek, M; Hunt, C (2002) Test methods for evaluating the reliability of PCB finishes using lead-free alloys - a guide. NPL Report. MATC(A)107

Dusek, M; Hunt, C (2002) A test procedure for measurement of solder volume effect on reliability. NPL Report. MATC(A)128

Dusek, M; Hunt, C (2002) A test procedure for measuring print quality. NPL Report. MATC(A)129

Dusek, M; Zou, L; Hunt, C (2002) Rheology testing of solder pastes and conductive adhesives - a guide. NPL Report. MATC(A)109

Dusek, M; Zou, L; Hunt, C (2002) Rheology testing of solder pastes and conductive adhesives used in stencil printing. NPL Report. MATC(A)102

E

Ebbecke, J*; Fletcher, N E; Ahlers, F J*; Hartland, A; Janssen, T J B M (2002) Study of the limitations of quantized acoustic current devices at PTB and NPL. In: 2002 Conference on Precision Electromagnetic Measurements (CPEM), 16-21 June 2002, Ottawa, Canada.

Edwards, C S; Barwood, G P; Gill, P; Rowley, W R C (2002) Development of a 778 nm rubidium two-photon diode laser frequency standard. In: Proceedings of the 6th Symposium on Frequency Standards and Metrology, 9-14 September 2001, University of St Andrews, Fife, Scotland, UK.

Esward, T J (2002) Finite element modelling of oil-operated piston-cylinder pressure balances: determining uncertainties in distortion coefficient predictions using the finite element method. NPL Report. CMAM 85

Esward, T J; Theobald, P D; Dowson, S P; Preston, R C (2002) An investigation into the establishment and assessment of a test facility for the calibration of acoustic emission sensors. NPL Report. CMAM 82

Etchegoin, P*; Liem, H*; Maher, R C*; Cohen, L F*; Brown, R J C; Hartigan, H; Milton, M J T; Gallop, J C (2002) A novel amplification mechanism for surface enhanced Raman scattering. Chem. Phys. Lett., 366 (1-2). pp. 115-121.

F

Fletcher, N E; Janssen, T J B M; Hartland, A (2002) Temperature as a limitation to the accuracy of SETSAW devices as quantum standards of current. IEE Proc. Sci. Meas. Technol., 149 (6). pp. 299-301.

Fry, A; Osgerby, S; Wright, M (2002) Oxidation of alloys in steam environments - a review. NPL Report. MATC(A)90

Fry, A T (2002) Evaluation of the repeatability of residual stress measurements using x-ray diffraction. NPL Report. MATC(MN)19

Fry, A T (2002) Residual stress measurement: XRD depth profiling using successive material removal. NPL Report. MATC(MN)34

Fry, A T (2002) Sensitivity evaluation for X-ray diffraction residual stress measurements. NPL Report. MATC(A)104

G

Gallop, J C; Josephs-Franks, P W; Davies, J; Hao, L; Macfarlane, J* (2002) Miniature dc SQUID devices for the detection of single atomic spin-flips. Physica C, 368. pp. 109-113.

Gant, A J (2002) Ball cratering as a technique to evaluate microabrasion in corrosive media. NPL Report. MATC(MN)39

Gant, A J (2002) Fractographic assessment of powder metallurgy steels and identification of failure origins in notched transverse rupture and notched bending fatigue. NPL Report. MATC(MN)40

Gant, A J; Roebuck, B (2002) Guide to ramped miniature thermomechanical tests for accelerated material evaluation in powder metallurgy tool steels. NPL Report. MATC(MN)23

Gardiner, T D (2002) Odour measurement and characterisation. NPL Report. COAM 12

Gee, M G; Gant, A; Hutchings, I M* (2002) Rotating wheel abrasive wear testing. Measurement Good Practice Guide. 55

Gee, M G; Gant, A; Hutchings, I*; Bethke, R*; Schiffman, K*; Van Acker, K*; Poulat, S*; Gachon, Y*; von Stebut, J* (2002) Ball cratering or micro-abrasion wear testing of coatings. Measurement Good Practice Guide. 57

Gee, M G; Hutchings, I M* (2002) General approach and procedures for erosive wear testing. Measurement Good Practice Guide. 56

Gee, M G; McNaught, I (2002) Stepwise erosion to determine the mechanisms of wear in gas borne particulate erosion. NPL Report. MATC(MN)32

Gee, M G; Neale, M J* (2002) General approach and procedures for unlubricated sliding wear tests. Measurement Good Practice Guide. 51

Gilmore, I S; Seah, M P (2002) Electron flood gun damage in the analysis of polymers and organics in time of flight SIMS. Appl. Surf. Sci., 187. pp. 89-100.

Goody, B A; Milton, M J T (2002) High accuracy gas flow dilutor using mass flow controllers with binary weighted flows. Meas. Sci. Technol., 13. pp. 1138-1145.

Gower, M R L; Broughton, W R (2002) Geometric and bolt position effects on the performance of bolted T-joints. NPL Report. MATC(MN)30

Gower, M R L; Sims, G D (2002) Towards a Standard Qualification plan (SQP) for composite materials - initial draft. NPL Report. MATC(A)84

Grant, P (2002) Evaluation of residual stress measurement uncertainties using X-ray diffraction and hole drilling via a UK intercomparison exercise. NPL Report. MATC(MN)020

Grant, P V; Lord, J D (2002) An evaluation of four hole drilling analysis techniques with respect to non-uniform residual stress fields. NPL Report. MATC(MN)31

Greenwood, J C (2002) The 'correct' and 'incorrect' generation of a cosine distribution of scattered particles for Monte-Carlo modelling of vacuum systems. Vacuum, 67. pp. 217-222.

Gregory, A P; Clarke, R N (2002) Traceable measurements on dielectric reference liquids over the temperature range 10 - 50 ºC using coaxial-line methods. In: 2002 Conference on Precision Electromagnetic Measurements (CPEM), 16-21 June 2001, Ottawa, Canada.

Gubin, M*; Kovalchuk, E*; Petrukhin, E*; Shelkovnikov, A*; Tyurikov, D*; Gamidov, R*; Erdogan, C*; Sahin, E*; Felder, R*; Gill, P; Lea, S N; Kramer, G*; Lipphardt, B* (2002) Absolute frequency measurements with a set of transportable He-Ne/CH4 optical frequency standards and prospects for future design and applications. In: Proceedings of the 6th Symposium on Frequency Standards and Metrology, 9-14 September 2001, University of St Andrews, Fife, Scotland, UK.

H

Hanson, A R; Clarke, P J (2002) Determination of uncertainty in spectrophotometric surface colour measurements. Proc. SPIE - Int. Soc. Opt. Eng., 4421. pp. 808-811.

Hao, L; Gallop, J C; Macfarlane, J C; Carr, C* (2002) HTS cryogenic current comparator for non-invasive sensing of charged-particle beams. Physica C, 368. pp. 114-118.

Hao, L; Gallop, J C; Purnell, A*; Cohan, L* (2002) Intermodulation distortion in HTS thin films: a global heating model. Physica C, 372-37 (1). pp. 469-473.

Harris, S; Ives, D J (2002) Polarisation mode dispersion in restricted optical bandwidth: an evaluation of measurement techniques. NPL Report. CETM 40

Hart, A; Haycocks, J; Jackson, K; Law, A; Leach, R K (2002) Measurement of surface texture in CBTLM: a three-year review of instrument capabilities. NPL Report. CBTLM 21

Haycocks, J (2002) An uncertsinty budjet for the Metrological Atomic Force Microscope. NPL Report. CBTLM 24

Henson, A S; Beauvais, D (2002) International benchmarking of UK Calibration and Measurement Capability (CMCs). NPL Report. INTOFF 1

Higginson, R L*; Roebuck, B; Palmiere, E J* (2002) Texture development in oxide scales on steel substrates. Scr. Mater., 47. pp. 337-342.

Hodnett, M; Gélat, P N; Zeqiri, B (2002) Aperture-based measurement of the effective radiating area of physiotherapy treatment heads: a new rapid system and detailed performance evaluation. NPL Report. CMAM 81

Holland, K P; Howes, J (2002) Improvements to the microwave mixer and power sensor linearity measurement capability at the National Physical Laboratory. IEE Proc. Sci. Meas. Technol., 149 (6). pp. 329-332.

Hossain, K (2002) Measurements for the quality of life. In: A celebration of past - a vision for the future Proceedings of a conference at the Royal Society to mark NPL's centenary 1900-2000., 2002, NPL.

Hugtenburg, R P*; DuSautoy, A R; Duane, S (2002) Energy resolution of in-phantom dose and charge measurement techniques used in the reconstruction of electron spectra. NPL Report. CIRM 50

Hunt, C; Lea, D; Adams, S M*; Stratton, P F* (2002) Inert research for lead-free soldering. Electron. Manuf. Test (Aug). pp. 9-10.

Hunt, C; Nottay, J; Brewin, A; Dinsdale, A T (2002) Predicting microstructure of mixed solder alloy systems. NPL Report. MATC(A)83

Hunt, J B (2002) The creation of a precision environment at NPL. In: Challenges for the Precision and Nano technologies. Proceedings of the euspen International Seminar., 7-8 February 2002, Huddersfield, UK.

Hurtmans, D*; Dufour, G*; Bell, W; Henry, A*; Valentin, A*; Camy-Peyret, C* (2002) Line intensity of R(0) and R(3) of the 12CH4 2 3 band from diode laser spectroscopy. J. Mol. Spectrosc., 215. pp. 1-6.

J

Janssen, T J (2002) Single electron transport: a quantum standard for current. In: A celebration of past - a vision for the future Proceedings of a conference at the Royal Society to mark NPL's centenary 1900-2000., 2002, NPL.

Jennett, N M; Bushby, A J* (2002) Adaptive protocol for robust estimates of coatings properties by nanoindentation. Mater. Res. Soc. Symp. Proc., 695. pp. 73-78.

Jennett, N M; Owen-Jones, S (2002) The scratch test: calibration, verification and the use of a certified reference material. Measurement Good Practice Guide. 54

Jones, R G (2002) Measurement of the electrical conductivity of water. IEE Proc. Sci. Meas. Technol., 149 (6). pp. 320-322.

K

Kandil, F A (2002) Effects of ultrasonic cleaning on integrity of components: a review. NPL Report. MATC(A)87

Keightley, J D; Watt, G C* (2002) Digital Coincidence Counting (DCC) and its use in the corrections for out-of-channel gamma events in 4pß- coincidence counting. Appl. Radiat. Isot., 56 (1-2). pp. 205-210.

Klein, H A; Knight, D J E*; Plimmer, M D*; Silver, J D* (2002) DTI scouting mission to Japan on Trapped Ions for Measurement and Enterprise (TIME) 26th - 30th November 2001. NPL Report. CBTLM 17

Kleinschmidt, P; Patel, P; Williams, J M; Janssen, T J B M (2002) Investigation of binary Josephson Arrays for arbitary waveform synthesis. IEE Proc. Sci. Meas. Technol., 149 (6). pp. 313-316.

Kleinschmidt, P; Williams, J M; Fletcher, N E; Janssen, T J B M (2002) Cryogenic current comparator bridge for quantum Hall resistance ratio measurements. IEE Proc. Sci. Meas. Technol., 149 (6). pp. 302-304.

L

Lait, L R*; Schoeberl, M R*; Newman, P A*; McGee, T*; Burris, J*; Browell, E V*; Richard, E*; Braathen, G O*; Bojkov, B R*; Goutail, F*; von der Gathen, P*; Kyrö, E*; Vaughan, G*; Kelder, H*; Kirkwood, S*; Woods, P T; Dorokhov, V*; Zaitcev, I*; Litynska, Z*; Kois, B*; Benesova, A*; Skrivankova, P*; De Backer, H*; Davies, J*; Jorgensen, T*; Mikkelsen, I S* (2002) Ozone loss from quasi-conservative coordinate mapping during the 1999-2000 SOLVE/THESEO 2000 campaigns. J. Geophys. Res., 107 (D20). SOL 16

Lea, C (2002) The E-marketplace and supple chain efficiencies. Global SMT & Packaging, 2 (2). pp. 7-8.

Lea, C (2002) End of life strategies. Global SMT & Packaging, 2 (5). p. 7.

Lea, C (2002) Making a difference. Global SMT & Packaging, 2 (Septem). p. 4.

Lea, C (2002) Networking and collaboration. Global SMT & Packaging, 2 (3). 6 and 8

Lea, C (2002) Printing and dispensing. Global SMT & Packaging, 2 (8). p. 8.

Lea, C (2002) SMARTies in Brighton. Global SMT & Packaging, 2 (9). p. 7.

Lea, C (2002) Trains, planes, photonics and E-business. Global SMT & Packaging, 2 (7). p. 8.

Lea, C (2002) Who pays; who makes money; from being green? Global SMT & Packaging, 2 (1). p. 8.

Lea, C (2002) The ascent of the technological society. Global SMT & Packaging, 2 (4). p. 8.

Lea, S N; Margolis, H S; Huang, G; Barwood, G P; Klein, H A; Blythe, P J; Webster, S A; Rowley, W R C; Gill, P; Windeler, R S* (2002) Femtosecond comb measurements of optical frequency standards at NPL. In: IEEE-LEOS 2002 15th Annual Meeting of the IEEE Lasers and Electo-Optics Society., 10-14 November 2002, Glasgow, UK.

Lea, S N; Margolis, H S; Huang, G; Rowley, W R C; Gill, P; Windeler, R S* (2002) Femtosecond optical frequency comb measurements at NPL. In: 2002 Conference on Precision Electromagnetic Measurements (CPEM), 16-21 June 2002, Ottawa, Canada.

Lea, S N; Margolis, H S; Huang, G; Rowley, W R C; Henderson, D; Barwood, G P; Klein, H A; Webster, S A; Blythe, P; Gill, P (2002) Femtosecond optical frequency comb measurements of lasers stabilised to transitions in 88Sr+, 171Yb+ and I2 at NPL. In: Proceedings of the 6th Symposium on Frequency Standards and Metrology, 9-14 September 2001, University of St Andrews, Fife, Scotland, UK.

Leach, R K (2002) Miniature machine plugs metrology gap. Phys. World, 15 (6). pp. 27-28.

Leach, R K (2002) Surface texture - stylus v optical? Qual. Today (Januar). S18-S20

Leach, R K (2002) Traceable measurements of surface texture in the optics industry. Proc. SPIE - Int. Soc. Opt. Eng., 4411. pp. 177-183.

Leach, R K (2002) The importance of metrology and standardisation for micro-systems technology. In: 7th International Conference on Commercialisation of Micro and Nano Systems, 8-12 September 2002, Michigan, USA.

Leach, R K; Blunt, L*; Chetwynd, D G*; Yacoot, A (2002) From nanoscience to nanotechnology. In: International Seminar "Challenges for Precision Engineering and Nanotechnologies", 7-8 February 2002, Huddersfield, UK.

Leach, R K; Blunt, L*; Chetwynd, D G*; Yacoot, A (2002) Nanoscience advances in the UK in support of nanotechnology. International Journal of Nanoscience, 1 (2). pp. 123-138.

Leach, R K; Cross, N R (2002) Low-cost traceable dynamic calibration of surface texture measuring instruments. Meas. Sci. Technol., 13. N1-N4.

Leach, R K; Harris, P M (2002) Ambiguities in the definition of spacing parameters for surface texture characterisation. Meas. Sci. Technol., 13. pp. 1924-1930.

Leach, R K; Hart, A (2002) A comparison of stylus and optical methods for measuring 2D surface textures. NPL Report. CBTLM 15

Lewis, V E; McClure, D R* (2002) Fourth IRMF comparison of calibrations of portable gamma-ray dose-rate monitors 2001-2002. NPL Report. CIRM 55

Lodeiro, M J; Broughton, W R; Gnaniah, S (2002) Optimisation of corona discharge surface treatment for improved adhesive bonding using design of experiments. NPL Report. MATC(MN)25

Lodeiro, M J; Cain, M G; Stewart, M (2002) High frequency displacement and dielectric measurements in piezoelectric materials. NPL Report. MATC(MN)21

Lodeiro, M J; Tomlins, P E (2002) Influence of pigments and processing on the dimensions and appearance of HDPE injection-moulded bottle caps. NPL Report. MATC(MN)22

Lord, J D (2002) Review of methods and analysis software for the determination of modulus from tensile tests. NPL Report. MATC(MN)41

Lord, J D; Fry, A T; Grant, P V (2002) A UK residual stress intercomparison exercise - an examination of the XRD and hole drilling techniques. NPL Report. MATC(A)98

Loveday, M S; Mahon, G J*; Roebuck, B; Sellars, C M*; van der Winden, M R* (2002) Measuring flow stress in plane strain compression tests. Measurement Good Practice Guide. 27

M

Mansfield, A J; Wayman, J L* (2002) Best practices in testing and reporting performance of biometric devices. NPL Report. CMSC 14/02

Martin, N A; Marlow, D J; Henderson, M H; Goody, B A (2002) Determination of the benzene diffusive uptake rate for the sorbent Carbopack X employed in Perkin Elmer type samplers. The Diffusive Monitor (13). pp. 9-11.

McCartney, L N (2002) Prediction of ply cracking formation and failure in laminates. Comp. Sci. Technol., 62. pp. 1619-1631.

McCartney, L N; Maxwell, A S (2002) Predicting through-thickness cracking in a two-layer coated system subject to axial loading and bending. NPL Report. MATC(A)138

McCartney, L N; Schoeppner, G A* (2002) Predicting the effect of non-uniform ply cracking on the thermoelastic properties of cross-ply laminates. Comp. Sci. Technol., 62. pp. 1841-1856.

McCormick, N J (2002) Virtual testing: materials measurement for the future. In: A celebration of past - a vision for the future Proceedings of a conference at the Royal Society to mark NPL's centenary 1900-2000., 2002, NPL.

McCormick, N J; Gower, M R L; McCartney, L N (2002) An Internet accessible system for simulating damage in composite laminates during bending deformation. NPL Report. MATC(A)96

McCormick, N J; Lawrence, K (2002) The impact of new Internet technologies on SmartManuals and other MATC Internet projects. NPL Report. MATC(A)97

McGuiness, B (2002) A vision for NPL - the next decade. In: A celebration of past - a vision for the future Proceedings of a conference at the Royal Society to mark NPL's centenary 1900-2000., 2002, NPL.

Mendels, D A; Shaw, R M (2002) Detection of sub-surface defects in multi-layered polymer composites by speckle pattern interferometry. NPL Report. MATC(MN)17

Mendels, D A; Shaw, R M (2002) Determination of mode I energy release rate in composite laminates by the wedge test. NPL Report. MATC(MN)36

Mendels, D A; Shaw, R M (2002) Determination of mode II energy release rate in composite laminates by the modified double-lap shear test. NPL Report. MATC(A)125

Milton, M J T (2002) Bayesian method for combining the results of repeated measurements with application to key comparison reference values. In: Joint BIPM - NPL Workshop on the impact of information technology in metrology, 16-19 September 2002, NPL, UK.

Milton, M J T (2002) Biotechnology and chemistry: new challenges for metrology. In: A celebration of past - a vision for the future Proceedings of a conference at the Royal Society to mark NPL's centenary 1900-2000., 2002, NPL.

Milton, M J T (2002) Infrared and ultraviolet DIAL for remote emission sensing. In: Optical Methods in Atmospheric Analysis, WE-Heraeus Seminar 286, 14-18 October 2002, Bad Honnef , Germany.

Milton, M J T; Brookes, C; Heine, H,-J*; Mace, T*; Botha, A*; Castanheira, I*; Musil, S*; Andersson, L*; Konopelko, L*; Knuuttila, J* (2002) Key comparison: final report of key comparison EUROMET.QM-K4 (ethanol in air): EUROMET Project 580. Metrologia, 39 (Suppl.). p. 8008.

Milton, M J T; Brookes, C; Heine, H-J*; Mace, T*; Botha, A*; Castanheira, I*; Musil, S*; Andersson, L*; Konopelko, L*; Knuuttila, J* (2002) Final report of key comparison EUROMET.QM-K4 (ethanol in air) EUROMET project 580. Draft B. NPL Report. COAM 8

Milton, M J T; Brown, A; Woods, P T (2002) Natural gas standards at the National Physical Laboratory. In: 2nd International Gas Analysis Symposium, 31 January - 1 February 2002, Maastricht.

Milton, M J T; Cumpson, P J (2002) Nanoscale and integrity of the SI. In: IEEE Conference on Precision Electromagnetic Measurements Conference Digest, June 2002.

Milton, M J T; Wang, J (2002) High accuracy method for isotope dilution mass spectrometry with application to the measurement of carbon dioxide. Int. J Mass Spectrom., 218 (1). pp. 63-73.

Milton, M J T; Wang, J; Goody, B (2002) Advances in the validation and comparison of primary standard gas mixtures. In: 2nd International Gas Analysis Symposium, 31 January - 1 February 2002, Maastricht.

Milton, M J T; Wang, J; Harris, P M (2002) Implementation of isotop dilution mass spectrometry with one, two and three reverse steps. NPL Report. COAM 7

Milton, M J T; Wielgosz, R I* (2002) Use of the international system of units (SI) in isotope ratio mass spectrometry. Rapid Commun. Mass Spectrom., 16. pp. 2201-2204.

Milton, M J T; Woods, P T; Holland, P E (2002) Uncertainty reduction due to correlation effects in weighing during the preparation of primary gas standards. Metrologia, 39. pp. 97-99.

Morgan, A G; Ridler, N M; Salter, M J (2002) Generalized 'adaptive' calibration schemes for VNA's. In: Automated RF and Microwave Measurements Society (ARMMS) Meeting Proceedings Digest, 22-23 April 2002, Corby, Northamptonshire.

Morgan, A G; Ridler, N M; Salter, M J (2002) Generalized calibration schemes for precision RF vector network analyser measurements. In: 19th IEEE Instrumentation and Measurement Technology Conference Proceedings, May 2002, Anchorage, USA.

Morrell, R (2002) Determining elastic moduli of hardmetals. NPL Report. MATC(MN)33

N

NPL, (2002) Good Practice Guidance Note - Thermal effects on balances and weights. Other.

NPL, (2002) Good Practice Guidance Note: Thermal effects on balances and weights. Other.

Newland, B G*; Morrell, R (2002) Drivers and progress in the CEN TC184 standards activities for advanced technical ceramics in Europe. In: Ceramic Transactions Volume 133 - Improved Ceramics through New Measurements, Processing and Standards. American Ceramic Society, pp. 241-250. ISBN 1-57498-147-1

Niklewicz, J; Sims, G D (2002) Size effects in composite materials. NPL Report. MATC(A)74

Nutbrown, R F; Duane, S; Shipley, D R; Thomas, R A S (2002) Evaluation of factors to convert absorbed dose calibrations from graphite to water for the NPL high-energy photon calibration service. Phys. Med. Biol., 47 (3). pp. 441-454.

O

Oxborrow, M; Webster, S A; Gill, P (2002) Stability of ND:YAG 'flywheel' lasers locked to ultra-high-finesse etalons made from either ULE or mono-crystalline-sapphire. In: Proceedings of the 6th Symposium on Frequency Standards and Metrology, 9-14 September 2001, University of St Andrews, Fife, Scotland, UK.

P

Preston, R C (2002) Summary of NDT/NDE- related research, development and facilities at the UK National Physical Laboratory. NPL Report. CMAM 79

Q

Quested, P N; Brooks, R F; Monaghan, B J* (2002) The prediction of thermophysical properties for modelling solidification of metallic melts. In: Proceedings of the Mills Symposium: Metals, Slags, Glasses:High Temperature Properties and Phenomema, 22-23 August 2002, Institute of Metals, London, UK.

R

Read, B E; Dean, G; Wright, L (2002) Influence of strain rate and temperature on the stress/strain behaviour of rubber-toughened plastics. NPL Report. MATC(A)77

Redgrave, F; Henson, A (2002) Improving dialogue between the European Regulatory Bodies and the National Metrology Institutes through the RegMet project. In: NCSL 2002 International Conference Proceedings, 2002, San Diego, USA.

Rendle, P; Grant, P V (2002) The potential application of digital image correlation for measuring CTE - and initial study. NPL Report. MATC(MN)28

Richardson, D (2002) Partnership with industry. In: A celebration of past - a vision for the future Proceedings of a conference at the Royal Society to mark NPL's centenary 1900-2000., 2002, NPL.

Ricolfi, T*; Battuelle, M*; Girard, F*; Machin, G; McEvoy, H C; Ugur, S*; Diril, A* (2002) Radiation temperature scales between the indium and silver points realized at IMGC, NPL and UME using a fixed-point calibration technique. Meas. Sci. Technol., 13 (12). pp. 2090-3.

Rides, M (2002) Measurement needs for nano-scale materials and devices. Report on the VAMAS-CENSTAR workshop, 5-6 June 2002, National Physical Laboratory, Teddington, UK. VAMAS Bulletin, 25. pp. 2-15.

Rides, M (2002) Review of the need and measurement methods for multi-axial testing of polymer melt rheology. NPL Report. MATC(A)32

Rides, M; Allen, C R G (2002) Extensional flow properties of polymers using stretching flow methods. Measurement Good Practice Guide. 63

Rides, M; Allen, C R G (2002) Guide to the measurement of extensional flow properties of polymers. NPL Report. MATC(MN)43

Rides, M; Allen, C R G (2002) Guide to the measurement of the flow properties of polymers. NPL Report. MATC(MN)42

Rides, M; Allen, C R G (2002) Low rate extensional rheometry of polymer melts. NPL Report. MATC(A)114

Rides, M; Allen, C R G (2002) Measuring the extensional flow behaviour of polyethylenes for plastics processing. NPL Report. MATC(MN)27

Rides, M; Allen, C R G; Dawson, A (2002) Multi-rate and extensional flow measurements using the melt flow rate instrument. Measurement Good Practice Guide. 61

Rides, M; Dawson, A; Allen, C R G (2002) Improved melt flow rate measurements: an industrial case study. NPL Report. MATC(MN)38

Ridler, N M (2002) Calibrate VNAs over the internet. Test Meas. World, 22 (7). 39-40, 43

Ridler, N M (2002) Evaluating and expressing uncertainty in complex S-parameter measurements. In: ARFTG/NIST Measurements Short Course on Microwave Measurements and Instrumentation, 3-4 December 2002, Washington D.C, USA.

Ridler, N M (2002) News in RF impedance measurement. In: XXVIIth General Assembly of the International Union of Radio Science (URSI), 17-24 August 2002, The Netherlands.

Ridler, N M; Morgan, A G; Salter, M J (2002) Generalised adaptive calibration schemes for RF network analysers based on minimising the uncertainty of measurement. In: 60th Automatic Radio Frequency Techniques Group (ARFTG) Conference, 5-6 December 2002, Washington, DC, USA.

Ridler, N M; Salter, M J (2002) An approach to the treatment of uncertainty in complex S-parameter measurements. Metrologia, 39 (3). pp. 295-302.

Rietveld, G*; Koijmans, Ch V*; Henderson, L C A; Hall, M J; Harmon, S A C; Warnecke, P*; Schumacher, B* (2002) DC conductivity measurements in the Van der Pauw geometry. In: 2002 Conference on Precision Electromagnetic Measurements (CPEM), 16-21 June 2002, Ottawa, Canada.

Robinson, I A; Kibble, B P (2002) Progress in relating the kilogram to Planck's constant with the NPL watt balance. In: 2002 Conference on Precision Electromagnetic Measurements (CPEM), 16-21 June 2002, Ottawa, Canada.

Roebuck, B (2002) Hardmetals hardness and coercivity property maps. NPL Report. MATC(MN)14

Roebuck, B (2002) Mechanical measurements for hardness. VAMAS Bulletin, 25. p. 41.

Roebuck, B (2002) An interlaboratory exercise on the magnetic properties of various WC hardmetals. NPL Report. MATC(A)78

Roebuck, B; Bennett, E G (2002) Microstructure and toughness of various baseline and wide grained hardmetals. NPL Report. MATC(A)101

Roebuck, B; Brooks, M; Gee, M G (2002) Load cell ringing in high rate compression tests. NPL Report. MATC(MN)18

Roebuck, B; Gee, M G (2002) Guide to ramped miniature thermomechanical tests for accelerated material discrimination in hardmetals. NPL Report. MATC(MN)15

Roebuck, B; Lord, J D; Brooks, M; Loveday, M S; Sellars, C M*; Evans, R W* (2002) Measuring flow stress in hot axisymmetric compression tests. Measurement Good Practice Guide. 3 (Issue 2)

S

Salmon, D R; Williams, R G; Tye, R P (2002) Thermal conductivity and moisture measurements on masonry materials. ASTM Spec. Tech. Publ., 1426. pp. 58-78.

Salter, M J; Loader, B G; Alexander, M J; Knight, D A (2002) Broadband calculable dipole reference antennas. IEEE Trans. Electromagn. Compat., 44 (1). pp. 45-58.

Saunders, S R J; Banks, J P (2002) An evaluation of thermal barrier coated specimens exposed to long-term ageing tests. NPL Report. MATC(A)113

Scott, C J (2002) Second IRMF comparison of surface contamination monitor calibrations 2000-2001. NPL Report. CIRM 54

Seah, M P (2002) Quantitative AES and XPS: tests of theory using AES and XPS databases with REELS background subtraction. Journal of Surface Analysis, 9. pp. 275-280.

Seah, M P (2002) Resolution parameters for model functions used in surface analysis. Surf. Interface Anal., 33. pp. 950-953.

Seah, M P; Spencer, S J (2002) Ultra-thin SiO2 on Si: II, issues in quantification of the oxide thickness. Surf. Interface Anal., 33. pp. 640-652.

Seah, M P; White, R* (2002) Ultra-thin SiO2 on Si: III mapping the layer thickness efficiently by XPS. Surf. Interface Anal., 33. pp. 960-963.

Sims, G D (2002) Annual review of composites standardisation activities, April 2001-March 2002. NPL Report. MATC(A)110

Sims, G D (2002) Polymer Composites. VAMAS Bulletin, 25. pp. 29-31.

Sims, G D (2002) Traceability and qualification in design with composite materials. NPL Report. MATC(A)81

Sinclair, A G; Wilson, M A; Letchumanan, V; Gill, P (2002) Resolved sideband cooling of a single trapped strontium ion. In: Proceedings of the 6th Symposium on Frequency Standards and Metrology, 9-14 September 2001, University of St Andrews, Fife, Scotland, UK.

Slemr, J*; Slemr, F*; Partridge, R H; D'Souza, H; Schmidbauer, N* (2002) Accurate measurements of hydrocarbons in the atmosphere (AMOHA): three European intercomparisons. J. Geophys. Res., 107 (D19). ACH 15-1 - 15-25

Smith, A J A; Roddie, A G; Woolliams, P D (2002) Optoelectronic techniques for improved high speed electrical risetime. In: IEEE MTT-S International Microwave Symposium Digest, 2-7 June 2002, Seattle, USA.

Stacey, C (2002) NPL vacuum guarded hot-plate for measuring thermal conductivity and total hemispherical emittance of insulation materials. ASTM Spec. Tech. Publ., 1426. pp. 130-146.

Stevens, R F (2002) Polarisation extinction ratio-measurement requirements for optical communication systems. NPL Report. CETM 41

Stevens, R F; Harvey, T G* (2002) Lens arrays for a three-dimensional imaging system. J. Opt. A: Pure Appl. Opt., 4. S17-S21

Stewart, M; Cain, M G (2002) The variability of piezoelectric measurements: material and measurement method contributions. NPL Report. MATC(A)100

Sweeney, B P; Milton, M J T; Butterfield, D M; Woods, P T (2002) Comparison of national photometric ozone primary standards: Euromet project 414. NPL Report. COAM 15

T

Tanner, J G*; Thomas, D J; Bartlett, D T*; Hager, L G*; Horwood, N A (2002) The influence of the energy distribution of workplace fields on neutron personal dosemeter reading. Nucl. Instrum. Methods Phys. Res. A, Accel. Spectrom. Detec. Assoc. Equip., 476 (1-2). pp. 405-410.

Tanner, R J*; Thomas, D J; Bartlett, D T*; Hager, L G*; Horwood, N; Taylor, G C* (2002) Effect of the energy dependence of response of neutron personal dosemeters routinely used in the UK on the accuracy of dose estimation. Technical Report. NRPB.

Taylor, G C; Bentley, R D*; Conroy, T J*; Hunter, R*; Jones, J B L*; Pond, A*; Thomas, D J (2002) The evaluation and use of a portable TEPC system for measuring in-flight exposure to cosmic radiation. Radiat. Prot. Dosim., 99 (1-4). pp. 435-438.

Taylor, P (2002) Cold, single atoms: quantum standards for length and time. In: A celebration of past - a vision for the future Proceedings of a conference at the Royal Society to mark NPL's centenary 1900-2000., 2002, NPL.

Theobald, P; Preston, R C; Robinson, S P; Barham, R G; Tyrer, T*; Greated, C*; Campbell, M*; Schlicke, T*; Hargrave, S*; Swift, C*; Crickmore, R* (2002) Fundamental standards for acoustics based on optical methods - first stage report. NPL Report. CMAM 83

Theocharous, E; Birch, J R* (2002) Detectors for mid- and far-infrared spectrometry: selection and use. In: Handbook of Vibrational Spectroscopy Volume 1: Theory and Instrumentation. John Wiley & Sons Ltd, UK, pp. 1-19. ISBN 0471988472

Thomas, D J; Alevra, A V* (2002) Bonner sphere spectrometers - a critical review. Nucl. Instrum. Methods Phys. Res. A, Accel. Spectrom. Detec. Assoc. Equip., 476 (1-2). pp. 12-20.

Thomas, D J; Bardell, A G; Macaulty, E M* (2002) Characterisation of a gold foil based bonner sphere and measurements of neutron spectra at a medical accelerator. Nucl. Instrum. Methods Phys. Res. A, Accel. Spectrom. Detec. Assoc. Equip., 476 (1-2). pp. 31-35.

Thomas, D J; Roberts, N J; Bennett, A; Kolkowski, P (2002) The NPL contribution to a CCRI international comparison of fast neutron fluence measurements performed at the PTB in March 2001. NPL Report. CIRM 51

Turnbull, A; Coleman, D; Griffiths, A J; Francis, P E (2002) Effectiveness of corrosion inhibitors in retarding propagation of localised corrosion. In: Corrosion 2002, 8-12 April 2002, Denver, USA.

Turnbull, A; Francis, P E; Ryan, M P*; Orkney, L P; Griffiths, A J; Hawkins, B* (2002) A novel approach to characterizing the corrosion resistance of super duplex stainless steel welds. Corrosion, 58 (12). pp. 1039-1048.

Turnbull, A; Griffiths, A J (2002) Corrosion and cracking of weldable 13 Cr Martensitic Stainless Steel - a review. NPL Report. MATC(A)108

Turnbull, A; Griffiths, A J (2002) An evaluation of the effect of artificial buffers on the corrosion and electrochemistry of super 13 Cr steel. In: Supermartensitic Stainless Steels 2002, October 2002, Brussels.

Turnbull, A; Griffiths, A J; Nimmo, W; Orkney, L P (2002) Evaluation of the susceptibility of a carbon steel weldment to preferential corrosion using the galvanostatic method - a guide to testing. NPL Report. MATC(A)117

Turnbull, A; Zhou, S; Willetts, A (2002) Environment assisted cracking of 316L stainless steel in acetic acid environments. In: Corrosion 2002, 8-12 April 2002, Denver, USA.

Tye, R P; Salmon, D R (2002) NPL initiatives in the development of thermal properties reference materials. Int. J. Thermophysics, 23 (4). pp. 1047-1061.

Tyler, D K; Baker, M; Woods, M J (2002) NPL secondary standard radionuclide calibrator. Syringe calibration factors for radionuclides used in nuclear medicine. Int. J. Appl. Radiat. Isot., 56 (1-2). pp. 343-347.

Tyler, D K; Woods, M J (2002) Syringe calibration factors and volume correction factors for the NPL secondary standard radionuclide calibrator. NPL Report. CIRM 56

U

Usadi, E (2002) Understanding and exploiting diffraction in optical radiation measurements. NPL Report. COAM 9

W

Webster, S A; Taylor, P; Roberts, M; Barwood, G P; Blythe, P; Gill, P (2002) A frequency standard using the 2S1/2 - 2F5/2 octupole transition in 171Yb+. In: Proceedings of the 6th Symposium on Frequency Standards and Metrology, 9-14 September 2001, University of St Andrews, Fife, Scotland, UK.

Webster, S A; Taylor, P; Roberts, M; Barwood, G P; Gill, P (2002) Kilohertz resolution spectroscopy of the 2D1/2-2F7/2 electric octupole transition in a single 171Yb+ ion. Phys. Rev. A, At. Mol. Opt. Phys., 65 (5). 052501

Webster, S A; Taylor, P; Roberts, M; Barwood, G P; Gill, P (2002) Kilohertz resolution spectroscopy of the 2S1/2-1F7/2 electric octupole transition in a single 171Yb+ ion. Phys. Rev. A, At. Mol. Opt. Phys., 65 (5). 052501

White, H M; Taylor, J A F (2002) Effect of instrument design on diffuse reflectance measurements. Proc. SPIE - Int. Soc. Opt. Eng., 4421. pp. 761-764.

Wickham, M; Brewin, A; Hunt, C (2002) Rework of mixed lead-free alloys - a guide. NPL Report. MATC(A)106

Wickham, M; Hunt, C (2002) A comparison of automatic optical inspection systems for use with lead-free surface mount assemblies. NPL Report. MATC(A)119

Wickham, M; Zou, L; Dusek, M; Hunt, C (2002) Design guidelines for ultra fine pitch solder paste printing. NPL Report. MATC(A)127

Wickham, M; Zou, L; Dusek, M; Hunt, C (2002) A review of electronics materials deposition techniques including solder jetting and relief printing. NPL Report. MATC(A)92

Wickham, M; Zou, L; Hunt, C (2002) An assessment of the suitability of current PCB laminates to withstand lead-free reflow profiles. NPL Report. MATC(A)91

Williams, R G (2002) Overview of a project to determine the thermal resistance of masonry walls in dry and moist states and a conversion procedure to determine the appropriate design value. In: 6th International Symposium on Building Physics in the Nordic Countries, 2002.

Williams, R G; Ballard, G (2002) Calibration of a surround panel used to measure window U-values in a hot box apparatus as specified in BS EN ISO 12567-1:2000. NPL Report. CBTLM 18

Woods, D H; Baker, M I; Keightley, L J; Makepeace, J L; Pearce, A K; Woodman, A P; Woods, M J; Woods, S A; Waters, S* (2002) Standardisation of 11C. Appl. Radiat. Isot., 56 (1-2). pp. 327-330.

Woolley, A M; Sweeney, B P; Butterfield, D M (2002) London Air Quality Network: ratification report for July to December 2001. NPL Report. COAM 10

Woolley, A M; Sweeney, B P; Butterfield, D M (2002) London air quality network: ratification report for January to June 2002. NPL Report. COAM 13

Woolley, A M; Sweeney, B P; Butterfield, D M (2002) UK Automatic Rural Network: ratification report for July to December 2001. NPL Report. COAM 11

Woolley, A M; Sweeney, B P; Butterfield, D M (2002) UK automatic rural network: ratification report for January to June 2002. NPL Report. COAM 14

Z

Zhou, S; Turnbull, A (2002) Steam turbine operating conditions, chemistry of condensates and environment assisted cracking - a critical review. NPL Report. MATC(A)95

Zhukov, A A*; Purnell, A*; Miyoshi, Y*; Bugoslavsky, Y*; Lockman, Z*; Berenov, A*; Zhai, H Y*; Christen, H M*; Paranthaman, M P*; Lowndes, D H*; Jo, M H*; Blamire, M G*; Hao, L; Gallop, J C; MacManus-Driscall, J L*; Cohen, L F* (2002) Microwave surface resistance of MgB2. Appl. Phys. Lett., 80 (13). pp. 2347-2349.

Zou, L; Dusek, M; Wickham, M; Hunt, C (2002) Characterising stencil printing of surface mount and conductive adhesives. NPL Report. MATC(A)55

This list was generated on Thu Nov 14 03:22:49 2019 GMT.