< back to main site

Publications

Items where Year is 2005

Up a level
Export as [feed] RSS
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | K | L | M | N | O | P | R | S | T | V | W | Y | Z
Number of items: 263.

A

Aldrich-Smith, G; Jennett, N M; Housden, J* (2005) Adhesion of thin coatings - The VAMAS (TWA22-2) interlaboratory exercise. Surf. Coat. Technol., 197 (2-3). pp. 336-344.

Aldrich-Smith, G; Jennett, N M; Housden, J* (2005) Adhesion of thin coatings - the VAMAS (TWA22-2) interlaboratory exercise. Surf. Coat. Technol., 197 (2-3). pp. 336-344.

Alexander, M J (2005) CISPR standards for measurements above 1 GHz. In: IEE.Freemet Seminar on EMC above 1 GHz, 29 November 2005, NPL, UK.

Alexander, M J (2005) CISPR standards for measurements above 1 GHz. In: IEE.Freemet Seminar on EMC above 1 GHz, 29 November 2005, NPL, UK.

Allen, C R G; Rides, M; Duncan, B C (2005) Determining thermal conductivity by a differential scanning calorimetry method. NPL Report. DEPC-MN 031

Arnaut, L R (2005) Correcting for imperfections in the experimental characterization of dielectric media for high-precision metrology. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT), 3-9 July 2005, Singapore.

Arnaut, L R (2005) Coupling of reverberation fields to test objects near a conducting boundary. In: Proc. EMC Europe 2006 - Workshop on Reverberation Chambers, 4-8 September 2006, Barcelona, Spain.

Arnaut, L R (2005) On the maximum rate of fluctuation in mode-stirred reverberation. IEEE Trans. Electromagn. Compat., 47 (4). pp. 781-804.

Arnaut, L R (2005) Statistical distributions of dissipated power in electronic circuits immersed in a random electromagnetic field. Radio Sci., 40 (6). RS6S06

Arnaut, L R; Knight, D A (2005) Radiated emission measurements in a reverberation chamber. In: Proc. EMC UK2005, 11-12 October 2005, Newbury, UK.

Arnaut, L R; Knight, D A (2005) Radiated emissions in complex electromagnetic environments using reverberation chambers. In: EMC Europe Workshop on Wireless Systems, 19-21 September 2005, Rome, Italy.

Awan, S A; Kibble, B P (2005) Towards accurate measurement of the frequency dependence of capacitance and resistance standards up to 10 MHz. IEEE Trans. Instrum. Meas., 54 (2). pp. 516-520.

Awan, S A; Miall, J; Lees, K; Clarke, R N (2005) Accurate dielectric measurements at frequencies up to 10 GHz based on novel M/NEMS devices. In: BioNano3 International Conference, September 2005, University of Sussex.

Awan, S A; Miall, J; Lees, K; Clarke, R N (2005) Novel 2D and 3D M/NEMS devices for accurate electromagnetic measurements. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

B

Baker, M; Chari, K; Judge, S M; MacMahon, T D; Stroak, A J (2005) A review of commercial radionuclide calibrators. NPL Report. DQL-RN 003

Barker, R M; Harris, P M; Wright, L (2005) Software Support for Metrology - Good Practice Guide No. 16 - Testing algorithms and software. NPL Report. DEM-ES 003

Barker, R M; Parkin, G I (2005) Software review of a self-calibrating instrument. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Blackburn, J F; Arnaut, L R (2005) Numerical convergence in period methods of moments analysis of frequency-selective surface based on wire elements. IEEE Trans. Antennas Propag., 53 (10). pp. 3308-3315.

Blunt, L*; Jiang, X*; Leach, R K; Harris, P M; Scott, P* (2005) The development of user-friendly software measurement standards for surface topography software assessment. In: Proceedings 10th International Conference on Metrology and Properties of Engineering Surfaces, 4-7 July 2005, St Ettiane, France.

Blunt, L*; Jiang, X*; Xiao, S*; Li, T*; Feng, X*; Brennan, J*; Scott, P*; Leach, R K; Harris, P M; Parkin, G I (2005) Development and dissemination of SOFTGAUGES for surface topography. Technical Report. Centre for Precision Technologies, University of Huddersfield.

Blunt, L*; Leach, R K; Jiang, X*; Scott, P*; Harris, P M; Xiao, S*; Li, T*; Parkin, G I (2005) Development of softgauges for surface metrology. In: 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 8-11 May 2005, Montpellier, France.

Bourgeois, P-Y*; Bazin, N*; Kersalé, Y*; Giordano, V*; Tobas, M E*; Oxborrow, M (2005) Maser oscillation in a whispering-gallery-mode microwave resonator. Appl. Phys. Lett., 87 (22). 224101

Bowen, C R*; Dent, A C*; Stevens, R*; Cain, M G; Stewart, M (2005) Determination of critical and minimum volume fraction for composite sensors and actuators. In: 4M 2005 - First International Conference on Multi-Material Micro Manufacture, 2005, Cardiff, UK.

Brennan, J K*; Crampton, A*; Jiang, X*; Leach, R K; Harris, P M (2005) Approximation of surface texture profiles. J. Phys., Conf. Ser., 13. pp. 264-267.

Brennan, J K*; Crampton, A*; Jiang, X*; Leach, R K; Harris, P M (2005) Reconstruction of continuous surface profiles from discretely sampled data. In: 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 8-11 May 2005, Montpellier, France.

Brett, D J L*; Brown, R J C (2005) Electrchemical study of biotin-modified self-assembled monolayers. NPL Report. DQL-AS 013

Brewin, A; Zou, L; Dusek, M; Hunt, C (2005) Preliminary measurements of soldering flux residues in AC environment. NPL Report. DEPC-MPR 029

Brooks, R F; Quested, P N (2005) The surface tension of steels. J. Mater. Sci., 40 (9-10). pp. 2233-2238.

Broussely, M; Levick, A P; Edwards, G J (2005) Simultaneous measurement of temperature, thermal diffusivity, thermal conductivity and spectral emissivity by photothermal radiometry. J. Phys. IV, Proc., 125. pp. 627-630.

Broussely, M; Levick, A P; Edwards, G J (2005) Survey of applications for LART (Th 3.1.1.01). NPL Report. DEPC-TH 008

Broussely, M*; Levick, A P; Edwards, G J (2005) A novel comparative photothermal method for measuring thermal diffusivity. Int. J. Thermophysics, 26 (1). pp. 221-232.

Brown, A S; Yardley, R E; Quincey, P G; Butterfield, D M (2005) Ambient air particulate matter: quantifying errors in gravimetric measurements. NPL Report. DQL-AS 015

Brown, E; Hao, L; Gallop, J C; Macfarlane, J*; Cohen, L* (2005) Ballistic thermal and electrical conductance measurements on individual multi-wall carbon nanotubes. Appl. Phys. Lett., 87. 023107

Brown, L J (2005) Measurement of coating adhesion using the Rockwell indentation technique. NPL Report. DEPC-MN 020

Brown, R J C (2005) Atmospheric ambiguity. Chemistry World, 2 (12). p. 27.

Brown, R J C (2005) Benford's law and the screening of analytical data: the case of pollutant concentrations in ambient air. Analyst, 130. pp. 1280-1285.

Brown, R J C (2005) Heavy metals monitoring network aids UK meet 'target values'. Local Authority Waste and Environment, 13 (9). p. 28.

Brown, R J C (2005) Monitoring ambient metals: UK response to fourth daughter directive. Network: The newsletter for the UK Air Quality Monitoring Network (9). pp. 1-2.

Brown, R J C (2005) The use of double anonymity in peer review: a decision whose time has come? Quality Assurance: Good Practice, Regulation and Law, 11 (2-4). pp. 103-109.

Brown, R J C; Kucernak, A R* (2005) The photelectrochemistry of platinum phthalocyanine films in aqueous media. J. Solid State Electrochem., 9 (6). pp. 459-468.

Brown, R J C; Milton, M J T (2005) Analytical techniques for trace element analysis: an overview. Trends in Analytical Chemistry, 24 (3). pp. 266-274.

Brown, R J C; Milton, M J T (2005) The microporpos structure of silver/silver chloride electrodes and the implications for Harned cell operation. Accred. Qual. Assur., 10 (7). pp. 352-355.

Brown, R J C; Milton, M J T; Yardley, R E; Brown, A S; Rivier, C*; Yardin, C* (2005) Analytical methodologies with very low blank levels: implications for practical and empirical evaluations of the limit of detection. NPL Report. DQL-AS 014

Brown, R J C; Taylor, A G* (2005) Optical second harmonic generation at platinum phthalocyanine-modified platinum electrodes. Thin Solid Films, 476 (2). pp. 373-378.

Brown, R J C; Woods, P T (2005) CEN and air quality standards in Europe. VAM Bulletin, 33. pp. 13-15.

Butler, D J*; Palmans, H; Webb, D V* (2005) Shift in absorbed dose for megavoltage photons when changing to TRS-398 in Australia. Australas. Phys. Eng. Sci. Med., 28 (3). pp. 155-164.

Butterfield, D M (2005) UK Heavy Metals Network audit report for 2005. NPL Report. DQL-AS 021

Butterfield, D M; Robinson, R A; Curtis, D*; Thompson, T* (2005) A study of the measurement issues associated with the monitoring of gaseous emissions from industrial plants. NPL Report. DQL-AS 022

Butterfield, D M; Sweeney, B P (2005) CPEA 28: airborne particulate concentrations and numbers in the United Kingdom (phase 2). State of network report. NPL Report. DQL-AS 019

Butterfield, D M; Whiteside, K; Quincey, P (2005) UK non-automatic hydrocarbon network: annual report for 2004. NPL Report. DQL-AS 016

C

Chapman, L A; Fry, A T; Roberts, S J (2005) Thermal diffusivity and thermal conductivity measurements on oxide scales. NPL Report. DEPC-MPE 018

Clarkson, P; Wright, P S (2005) A model based approach for the calibration of IEC standard flickermeters using complex waveforms. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Clarkson, P; Wright, P S (2005) A wavelet-based method of measuring fluctuating harmonics for determining the filter time constant of IEC standard harmonic analyzers. IEEE Trans. Instrum. Meas., 54 (2). pp. 488-491.

Clifford, C A; Seah, M P (2005) Quantification issues in the identification of nanoscale regions of homopolymers using modulus measurements via AFM nanoindentation. Appl. Surf. Sci., 252 (5). pp. 1915-1933.

Clifford, C A; Seah, M P (2005) The determination of atomic force microscope cantilever spring constants via dimensional methods for nanomechanical analysis. Nanotechnology, 16 (9). pp. 1666-1680.

Coleman, M; Robinson, R A; Brookes, A; Camm, R (2005) Optimisation of a carbon bed adsorber plant using FTIR. NPL Report. DQL-AS 003

Coleman, M; Robinson, R A; Mortimer, H (2005) Measurement performed at a fibreglass manufacturing plant using FTIR spectroscopy and wet reference methods. NPL Report. DQL-AS 004

Coleman, M; Robinson, R A; Mortimer, H; Brookes, A; Camm, R (2005) Process control benefits of continuous monitoring using FTIR spectroscopy at the thermal oxidiser plant. NPL Report. DQL-AS 002

Cox, M G; Harris, P M (2005) An outline of supplement 1 to the 'Guide to the expression of uncertainty in measurement on numerical methods for the propagation of distributions'. Meas. Tech., 48 (4). pp. 336-345.

Cox, M G; Harris, P M; Woolliams, E R (2005) Data evaluation of key comparisons involving several artefacts. In: Proceedings of AMCTM 2005, June 2005, Lisbon, Portugal.

Cox, M G; Vargha, G; Milton, M J T; Kamvissis, S (2005) Harmonisation of coupled calibration curves to reduce correlated effects in the analysis of natural gas by gas. J. Chromatography A, 1062. pp. 239-245.

Crane, L (2005) Report on Ceravision consultancy joint industry project. NPL Report. DQL-OR 013

Crocker, L E; Dean, G D; Tomlins, P E (2005) A method for predicting the perceived hardness of soft-touch elastomeric coatings and over-mouldings. NPL Report. DEPC-MPR 035

Cumpson, P J; Hedley, J*; Clifford, C A (2005) Microelectromechanical device for lateral force calibration in the atomic force microscope: lateral electrical nanobalance. J. Vac. Sci. Technol. B, 23 (5). pp. 1992-1997.

Cumpson, P J; Hedley, J*; Clifford, C A (2005) Microelectromechanical device for lateral force calibration in the atomic force microscope: lateral electrical nanobalance. J. Vac. Sci. Technol. B, 23 (5). pp. 1992-1997.

D

D'Souza, H; Henderson, D; Quincey, P (2005) UK non-automatic hydrocarbon network: measurement of selected ozone precursors from existing chromatograms. NPL Report. DQL-AS 017

Davis, J A; Greenhall, C A*; Stacey, P W (2005) A Kalman filter clock algorithm for use in the presence of flicker frequency modulation noise. Metrologia, 42 (1-2). pp. 1-10.

Dean, G D; Broughton, W R (2005) A review of creep modelling for toughened adhesives and thermoplastics. NPL Report. DEPC-MPR 011

Dean, G D; Mera, R D (2005) Measurement of failure in tough plastics at high strain rates. NPL Report. DEPC-MN 028

Dean, J C J; Jerome, S M (2005) A survey of user requirements for a UK radioactivity measurement infrastructure for nuclear decommissioning. NPL Report. DQL-RN 009

Dent, A C*; Nelson, L J*; Bowen, C R*; Stevens, R*; Cain, M G; Stewart, M (2005) Characterisation and properties of fine scale PZT fibres. J. Eur. Ceram. Soc., 25 (12). pp. 2387-2391.

Derwent, D*; Harrison, R*; Woods, P T; Quincey, P; Williams, M (2005) CPEA 28: airborne particulate concentrations and numbers in the United Kingdom (phase 2). Strategic Network review. NPL Report. DQL-AS 020

Duncan, B C; Leatherdale, D* (2005) Surface testing for bonding. Measurement Good Practice Guide. 77

Duncan, B C; Mera, R D; Leatherdale, D*; Taylor, M*; Musgrove, R* (2005) Techniques for characterising the wetting, coating and spreading of adhesives on surface. NPL Report. DEPC-MPR 020

Duncan, B C; Urquhart, J M; Roberts, S (2005) Review of measurement and modelling of permeation and diffusion in polymers. NPL Report. DEPC-MPR 012

Dusek, M; Hunt, C (2005) Creep rates and stress relaxation for micro-sized lead-free solder joints. NPL Report. DEPC-MN 021

Dusek, M; Hunt, C (2005) The analytical model II for predicting solder joint shape and volume impact on life-time. NPL Report. DEPC-MPR 039

Dusek, M; Hunt, C (2005) The measurement of creep rates and stress relaxation for micro sized lead-free solder joints. NPL Report. DEPC-MPR 021

Dusek, M; Wickham, M; Hunt, C (2005) Effect of PCB finish, processing and microstructure on lead-free solder joint reliability. NPL Report. DEPC-MPR 028

E

Eio, C P; Ridler, N M (2005) Characterising air lines using VNA loss measurements. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Elster, C*; Wöger, W*; Cox, M G (2005) Analysis of key comparison data: unstable travelling standards. Measurement, 48. pp. 883-893.

Elster, C*; Wöger, W*; Cox, M G (2005) Analysis of key comparison data: unstable travelling standards. Izmer. Tekh., 9. pp. 33-39.

F

Fatadin, I M A; Ives, D J (2005) Calibration and correction of the non-linearity of the response of an InGaAs array for mode field profiling. In: OFMC 2005 - 7th Optical Fibre Measurement Conference, 21-23 September 2005, NPL, UK.

Fellmuth, B*; Wolber, L*; Hermier, Y*; Pavese, F*; Steur, P P M*; Peroni, I*; Szmyrka-Grzebyk, A*; Lipinski, L*; Tew, W L*; Nakano, T*; Sakurai, H*; Tamura, O*; Head, D I; Hill, K D*; Steele, A G* (2005) Isotopic and other influences on the realization of the triple point of hydrogen. Metrologia, 42. pp. 171-193.

Fitzpatrick, M E*; Fry, A T; Holdway, P*; Kandil, F A; Shackleton, J*; Suominen, L (2005) Determination of residual stresses by X-ray diffraction. Measurement Good Practice Guide. 52

Flack, D R; Bevan, K* (2005) Fundamental good practice guide in the design and interpretation of engineering drawings for measurement processes. Measurement Good Practice Guide. 79

Flowers, J L (2005) A roadmap for quantum metrology. NPL Report. DEM-TQD 001

Flowers, J L; Jarvis, D (2005) Quantum metrology roadmaps - 2005. NPL Report. DEM-TQD 006

Forbes, A B; Leach, R K (2005) Self-calibration of a novel surface texture measuring instrument. In: Laser Mapping and Machine Performance VII (LAMDAMAP 2005), 25-27 June 2005, Cranfield University, UK.

Fox, A B*; Mills, K C*; Lever, D*; Bezerra, C*; Valadares, C*; Unamuno, I*; Laraudogoitia, J J*; Gisby, J A (2005) Development of fluoride-free fluxes for billet casting. ISIJ Int., 45 (7). pp. 1051-1058.

Fry, A T (2005) Residual stress measurement: XRD depth profiling using successive material removal. NPL Report. DEPC-MN 024

Fry, A T (2005) A study of factors that may influence the quality of residual stress measurements from X-ray diffraction. NPL Report. DEPC-MN 023

G

Gant, A J (2005) Notched fatigue testing of a hybrid powder metallurgy steel. NPL Report. DEPC-MPE 012

Gant, A J; Gee, M G; Roebuck, B (2005) Rotating wheel abrasion of WC/Co hardmetals. Wear, 258. pp. 178-188.

Gardner, S C (2005) Software Support for Metrology Good Practice Guide No. 14 - guidance and tools for interactive web pages. NPL Report. DEM-ES 002

Gaunt, J A*; Knight, A E; Windsor, S A; Chechik, V* (2005) Stability and quantum yield effects of small molecule additives on solutions of semiconductor nanoparticles. J. Colloid Interface Sci., 290 (2). pp. 437-443.

Gee, M G; McCormick, N J; Newton, L; Darling, R (2005) Analysis of the size and shape of abrasives. NPL Report. DEPC-MPE 009

Gee, M G; Newton, L (2005) The determination of residual stresses in coatings by coupon bending. NPL Report. DEPC-MN 025

Gee, M G; Roebuck, B; Gant, A (2005) Abrasive wear testing with the ASTM B611 and modified ASTM G65 rotating wheel test systems. In: 16th International Plansee Seminar - High Performance PM Materials, 30 May - 3 June 2005, Reutte, Austria.

Georgakopoulos, D; Williams, J M; Knott, A J; Esward, T J; Wright, P S (2005) Dynamic calibration of fatigue testing machines. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Georgakopoulos, D; Wright, P S (2005) On the calibration of energy and power meters under non-sinusoidal conditions. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Gibbs, D R (2005) Report on page aerospace consultancy joint industry project. NPL Report. DQL-OR 011

Gill, P (2005) Optical frequency standards. Metrologia, 42 (3). S125-S137

Gill, P; Margolis, H S (2005) Optical clocks. Phys. World, 18 (5). pp. 35-39.

Gilmore, I S; Seah, M P; Green, F M (2005) Static TOF-SIMS - a VAMAS interlaboratory study. Part 1. Repeatability and reproducibility of spectra. Surf. Interface Anal., 37. pp. 651-672.

Gilmore, I S; Seah, M P; Green, F M (2005) Static TOF-SIMS - a VAMAS interlaboratory study. Part 1. Repeatability and reproducibility of spectra. Surf. Interface Anal., 37 (8). pp. 651-672.

Gower, M R L; Shaw, R M; Klimaytys, G M (2005) Development of an integrated multi-axis loading and strain mapping facility. NPL Report. DEPC-MN 032

Gower, M R L; Shaw, R M; Sims, G D (2005) Evaluation of the repeatability under static loading of a compression-after-impact test method proposed for ISO standardisation. NPL Report. DEPC-MN 036

Gower, M R L; Sims, G D (2005) Characterisation of defects in composites materials systems. NPL Report. MATC(A)158

Gower, M R L; Sims, G D; Lee, R*; Frost, S*; Stone, M*; Wall, M* (2005) Assessment and criticality of defects and damage in materials systems. Measurement Good Practice Guide. 78

Gregory, A P; Clarke, R N (2005) Traceable measurements of the static permittivity of dielectric reference liquids over the temperature range 5 - 50 ºC. Meas. Sci. Technol., 16. pp. 1506-1516.

Gregory, A P; Clarke, R N (2005) Traceable measurements of the static permittivity of dielectric reference liquids over the temperature range 5 - 50 ºC. Meas. Sci. Technol., 16 (7). pp. 1506-16.

Griffiths, A J; Hinds, G; Turnbull, A (2005) Monotonic and cyclic slow strain rate testing of super 13% chromium steel welds under cathodic protection. Corrosion, 61 (2). pp. 111-118.

H

Haining, S*; Romens, E J*; Pegrum, C M*; Donaldson, G B*; Hao, L; MacFarlane, J C (2005) Single sensor high-temperature superconducting axial gradiometer with thick film pick-up loops. IEEE Trans. Appl. Supercond., 15 (2). pp. 769-772.

Hall, M J (2005) Characterization of magnetic force microscope probes for quantitative magnetic field mapping at micron length scales. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Hall, M J (2005) Measurement of magnetic properties for operational conditions. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Hall, M J; Harmon, S A C (2005) Measurement of the low frequency magnetic field from mobile handsets. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Halliwell, C M (2005) Representation of UK industry on international materials standards: impact report for period April 2002 to March 2005. NPL Report. DEPC-MPR 022

Hao, L; Gallop, J C; Macfarlane, J C* (2005) Coupled microwave resonators for sensitive bolometric detection. IEEE Trans. Instrum. Meas., 54 (2). pp. 886-889.

Hao, L; Macfarlane, J C*; Haining, S*; Gallop, J C (2005) HTS superconducting current comparator: dynamic range and noise limits. IEEE Trans. Instrum. Meas., 54 (2). pp. 584-587.

Hao, L; Macfarlane, J C*; Lam, S K H*; Foley, C P*; Josephs-Franks, P W; Gallop, J C (2005) Inductive sensor based on Nano-scale SQUIDS. IEEE Trans. Appl. Supercond., 15 (2). pp. 514-517.

Harms, A V; Gilligan, C R D; Arinc, A; Collins, S M; Jerome, S M; Johansson, L C; MacMahon, D; Pearce, A (2005) Environmental radioactivity comparison exercise 2005. NPL Report. DQL-RN 015

Harms, A V; Jerome, S M (2005) Preparation of calibrated reference sources containing 'fresh' fission products. J. Radioanal. Nucl. Chem., 264 (2). pp. 517-522.

Haycocks, J (2005) Surface certainty (3D surface measurement). Metalwork. Prod., 149 (7). p. 31.

Haycocks, J; Jackson, K (2005) Traceable calibration of transfer standards for scanning probe microscopy. Precision Engineering, 29. pp. 168-175.

Haycocks, J; Jackson, K; Leach, R K; Garratt, J*; McDonnell, I*; Rubert, P*; Lamb, J*; Wheeler, S* (2005) Tackling the challenge of traceable surface texture measurement in three dimensions. In: 5th International Conference and 7th Annual General Meeting of the European Society for Precision Engineering and Nanotechnology, 8-11 May 2005, Montpellier, France.

Henderson, D (2005) Essen and the National Physical Laboratory's atomic clock. Metrologia, 42 (3). S4-S9.

Hinds, G (2005) Preparation and characterisation of PEM fuel cell electrocatalysts: a review. NPL Report. DEPC-MPE 019

Hinds, G; Turnbull, A (2005) Does calcareous scale formation on cathodically protected steel affect hydrogen uptake? Corrosion, 61 (9). pp. 835-837.

Hinds, G; Zhao, J*; Griffiths, A J; Turnbull, A (2005) Hydrogen diffusion in super 13% chromium martensitic stainless steel. Corrosion, 61 (4). pp. 348-354.

Hou, P Y*; Saunders, S R J (2005) A survey of test methods for scale adhesion. Mater. High Temp., 22 (1-2). pp. 121-129.

Howes, J; Thompson, R (2005) A fully automated AF series substitution RF attenuation measurement system. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Humphreys, D A; Bernard, F (2005) An assessment of measurement requirements for the optical datacomms industry. In: OFMC 2005 - 7th Optical Fibre Measurement Conference, 21-23 September 2005, NPL, UK.

Humphreys, D A; Grosche, G*; Petersen, J C*; Henningsen, J*; Eggert, M*; Skipper, B F* (2005) Transmission of active optical reference signals over a 16 channel, 534.4 km WDM optical fibre network. In: OFMC 2005 - 7th Optical Fibre Measurement Conference, 21-23 September 2005, NPL. UK.

Humphreys, D A; Harper, M R; Smith, A J A; Smith, I M (2005) Vector calibration of optical reference receivers using a frequency-domain method. IEEE Trans. Instrum. Meas., 54 (2). pp. 894-897.

Humphreys, D A; Miall, J (2005) Towards the definition of RF envelope and RF power risetime. In: BEMC 2005 British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Humphreys, D A; Miall, J (2005) Traceable RF peak power measurements for mobile communications. IEEE Trans. Instrum. Meas., 54 (2). pp. 680-683.

Humphreys, D A; Tian, Z (2005) Vector measurement of modulated RF signals by an in-phase and quadrature referencing technique. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

K

Katerelos, D G*; McCartney, L N; Galiotis, C* (2005) Local strain re-distribution and stiffness degradation cross-ply polymer composites under tension. Acta. Mater., 53. pp. 3335-3343.

Katerelos, D G*; McCartney, L N; Galiotis, C* (2005) Local strain re-distribution and stiffness degradation in cross-ply polymer composites under tension. Acta. Mater., 53. pp. 3335-3343.

Kazakova, O; Webster, C; Tzalenchuk, A (2005) Metrological challenges of nanomagnetism. NPL Report. DEM-TQD 002

Kelly, A*; McCartney, L N; Clegg, W J*; Stearn, R J* (2005) Controlling thermal expansion to obtain negative expansivity using laminated composites. Comp. Sci. Technol., 65. pp. 47-59.

Knight, A E; Mashanov, G*; Molloy, J E* (2005) Single molecule measurements and biological motors. Eur. Biophys. J., 35 (1). p. 89.

Knight, D A; Alexander, M J (2005) Key comparison: Intercomparison of tuned dipole antenna factor at 300 MHz and 900 MHz. Technical Report. BIPM, France.

Knight, D A; Alexander, M J (2005) Supplementry comparison: Intercomparison of tuned dipole antenna factor at 300 MHz and 900 MHz. Technical Report. BIPM, France.

Kolkowski, P (2005) Pilot study for a CCRI comparison of thermal neutron fluence rate measurements using 10B ionisation chambers. NPL Report. DQL-RN 011

Kärkkäinen, A*; Awan, S A; Kyynäräinen, J*; Pekko, P*; Oja, A S*; Seppa, H* (2005) Optimized design and process for making a DC voltage reference based on MEMS. IEEE Trans. Instrum. Meas., 54 (2). pp. 563-566.

L

Lea, S N; Webster, C H; Sinclair, A G; Tzalenchuk, A Ya (2005) Applications of quantum entanglement to metrology. NPL Report. DEM-TQD 005

Leach, R K; Chetwynd, D*; Blunt, L*; Haycocks, J; Harris, P M; Jackson, K; Oldfield, S; Reilly, S (2005) Recent advances in traceable nanoscale dimension and force metrology in the UK. In: ISMTII 2005 - 7th International Symposium Series on Measurement Technology and Intelligent Instruments., 6-8 September 2005, Huddersfield, UK.

Lewis, V E; Woods, M J; Burgess, P*; Green, S*; Simpson, J*; Wardle, J* (2005) The assessment of uncertainty in radiological calibration and testing. Measurement Good Practice Guide. 49

Loader, B G; Lees, K (2005) Calibrating SAR probes in liquid at 2.45 GHz. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Lodeiro, M J; Mulligan, D R (2005) Cure monitoring techniques for polymer composites, adhesives and coatings. Measurement Good Practice Guide. 75

Lodeiro, M J; Stewart, M; Cain, M G (2005) Displacement and blocking force measurements of piezoelectric macroactuators. NPL Report. DEPC-MPR 040

Lord, J D; Loveday, M S*; Rides, M; McEnteggart, I* (2005) 'TENSTAND' WP2 final report: digital tensile software evaluation. NPL Report. DEPC-MPE 015

Lord, J D; Rides, M; Loveday, M S* (2005) 'TENSTAND' WP3 final report: modulus measurement methods. NPL Report. DEPC-MPE 016

M

Maher, R C*; Hou, J*; Cohen, L F*; Le Ru, E C*; Hadfield, J M*; Harvey, J E*; Etchegoin, P G*; Liu, FM*; Green, M*; Brown, R J C; Milton, M J T (2005) Resonance contributions to anti-Stokes/Stokes ratios under surface enhanced Raman scattering conditions. J. Chem. Phys., 123. 084702

Martin, N A; Duckworth, P; Henderson, M H; Swann, N R W; Granshaw, S T; Lipscombe, R P; Goody, B A (2005) Measurements of environmental 1,3-butadiene with pumped and diffusive samplers using the sorbent Carbopack X. Atmos. Environ., 39 (6). pp. 1069-1077.

Maxwell, A S (2005) Measurement of residual stress in plastics. NPL Report. DEPC-MN 027

Maxwell, A S (2005) Review of techniques for monitoring the environmental degradation of polymers. NPL Report. DEPC-MPR 015

Maxwell, A S; Broughton, W R; Dean, G D; Sims, G D (2005) Review of accelerated ageing methods and lifetime prediction techniques for polymeric materials. NPL Report. DEPC-MPR 016

McCartney, L N (2005) Energy-based prediction of failure in general symmetric laminates. Eng. Fract. Mech., 72. pp. 909-930.

McCartney, L N (2005) Energy-based prediction of progressive ply cracking and strength of general symmetric laminates using an homogenisation method. Compos. A, Appl. Sci. Manuf., 36. pp. 119-128.

McCartney, L N (2005) Modelling scale failure in tension (fracture and spallation). Mater. High Temp., 22 (1-2). pp. 167-177.

McCartney, L N (2005) Modelling scale failure in tension (fracture and spallation). Mater. High Temp., 22 (1-2). pp. 167-177.

McCartney, L N (2005) Prediction of dislocation formation in epitaxial multilayers subject to in-plane loading. Philos. Mag., 85 (15). pp. 1575-1610.

McCartney, L N (2005) Prediction of dislocation formation in epitaxial multilayers subject to in-plane loading. Philos. Mag., 85 (15). pp. 1575-1610.

McCormick, N J; Gee, M G (2005) The measurement of the shape of abrasive particles with confocal optical microscopy. NPL Report. DEPC-MPE 010

Meier, A*; Paton-Walsh, C*; Bell, W*; Blumenstock, T*; Hase, F*; Goldman, A*; Steen, A*; Kift, R; Woods, P T; Kondo, Y* (2005) Evidence of reduced measurement uncertainties from an FTIR instrument intercomparison at Kiruna, Sweden. J. Quant. Spectrosc. Radiat. Transf., 96. pp. 75-84.

Mensah, A; Hunt, C (2005) The role of permeability and ion transport in conformal coating protection. NPL Report. DEPC-MPR 032

Mera, R D; Duncan, B C (2005) Characterising the absorbency of porous substrates. NPL Report. DEPC-MN 015

Mera, R D; Duncan, B C (2005) Determining the wettability of substrates to hot melt adhesives. NPL Report. DEPC-MN 014

Morrell, R; Brooks, R F (2005) Piston dilatometry applied to aluminium and nickel alloys. NPL Report. DEPC-MPE 020

Morrell, R; Parfitt, M (2005) A stiff facility for controlled pre-cracking in fracture toughness tests. NPL Report. DEPC-MN 034

Morrell, R; Roebuck, B (2005) Determining residual stress in hard brittle materials by the thin strip curvature method. NPL Report. DEPC-MN 016

Morrell, R; Roebuck, B (2005) A method for high-temperature fatigue testing of hardmetals and PM materials. NPL Report. DEPC-MN 018

N

Newton, L; Gee, M G; Morrell, R (2005) Scratch edge chipping. NPL Report. DEPC-MN 026

Noble, J E; Wang, L*; Cole, K D*; Gaigalas, A K* (2005) The effect of overhanging nucleotides on fluorescence properties of hybridising oligonucleotides labelled with Alexa 488 and FAM fluorophores. Biophysical Chemistry, 113. pp. 255-263.

Nothofer, A; Alexander, M J; Knight, D (2005) Radiated RF measurement methods and test site validation above 1 GHz. In: IEEE EMC Symposium, August 2005, Chicago, USA.

Nothofer, A; Alexander, M J; Knight, D (2005) Radiated RF measurement methods and test site validation above 1 GHz. In: IEEE EMC Symposium, August 2005, Chicago, USA.

Nottay, J S; Rides, M (2005) Methods for characterising surface tension of hot melt adhesives. NPL Report. DEPC-MN 013

O

Ovchinnikov, Y B (2005) Compact magneto-optical sources of slow atoms. Opt. Commun., 249. pp. 473-481.

P

Palmans, H (2005) MCPTRAN.CAVITY and McPTRAN.RZ, Monte Carlo codes for the simulation of proton beams and calculation of proton detector perturbation factors. In: Proceedings of the Monte Carlo Method: Versatility Unbounded in a Dynamic Computing World, Monte Carlo Topical Meeting, 17-21 April 2005, Chattanooga, USA.

Palmans, H; Verhaegen, F* (2005) Assigning of nonelastic nuclear interaction cross sections to Housfield units for Monte Carlo treatment planning of proton beams. Phys. Med. Biol., 50 (5). pp. 991-1000.

Peggs, G N (2005) Measurement in the nanoworld. Nanotechnology Perceptions, 1 (1). pp. 18-23.

Pegrum, H M; Woolliams, E R; Fox, N P; Hanson, A R; Gibbs, D R; Servantes, W R; Goodman, T M (2005) Realising a primary spectral irradiance scale on deuterium lamps in the ultraviolet. In: UVNet Workshop, 20-21 October 2005, Davos, Switzerland.

Pietrzyk, M*; Kuziak, R*; Loveday, M S; Roebuck, B (2005) Effect of preheating and testing method on the flow stress of steels. In: Advanced Technology of Plasticity - 8th International Conference on Technology of Plasticity, 9-13 October 2005, Verona, Italy.

Pointer, M R; Barnes, N J*; Clarke, P J; Shaw, M J (2005) A new goniospectrophotometer for measuring gonio-apparent materials. NPL Report. DQL-OR 010

Pointer, M R; Ji, W*; Luo, M R*; Dakin, J* (2005) Gloss as an aspect of the measurement of appearance. NPL Report. DQL-OR 009

Purnell, A J*; Cohen, L F*; Hao, L; Gallop, J C (2005) Failure analysis of high temperature superconducting films at high microwave power using microsecond time domain measurements. Appl. Phys. Lett., 86. 092506

R

Ratal, G*; Michotte, C*; Hino, Y*; Tyler, D K; Judge, S M; Kharitonov, I A* (2005) Activity measurements of the radionuclide 51Cr for the NMIJ, Japan and the NPL, UK in the ongoing key comparison BIPM.RI(II)-K1.Cr-51 and the linking of the activity measurement of the VNIIM, Russian Federation in the APMP.RI(II)-K2.Cr-51 regional key comparison. Metrologia, 42 (Techni). 06014 (online)

Ravi, J; Tantra, R; Knight, A (2005) Techniques for the measurement of the structure of proteins in solution, and their complementarity to circular dichroism. NPL Report. DQL-AS 023

Rides, M (2005) Rheological characterisation of filled materials: a review. NPL Report. DEPC-MPR 013

Rides, M; Allen, C R G; Dawson, A (2005) Measurement of heat transfer properties for polymer processing. NPL Report. DEPC-MN 035

Rides, M; Allen, C R G; Dawson, A; Duncan, B (2005) Measurement of the rheological properties of adhesives. NPL Report. DEPC-MPR 019

Rides, M; Allen, C R G; Dawson, A; Nottay, J S (2005) Surface tension and extrusion-based rheological characterisation of hot melt adhesives. Measurement Good Practice Guide. 81

Rides, M; Duncan, B (2005) Correlating physical properties of adhesives with process and bonding performance. NPL Report. DEPC-MPR 018

Ridout, S*; Dusek, M; Bailey, C*; Hunt, C (2005) Modeling and experiments on an isothermal fatigue test for solder joints. In: Thermal Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 18-20 April 2005, Berlin, Germany.

Rietveld, G*; de la Court, P*; Parkin, G I; Barker, R M (2005) Evaluation of the self-sdjustment routine of a commercial LCR meter. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Roberts, N J; Jones, L N (2005) The NPL contribution to a CCRI international comparison of measurements of neutron source emission rate. NPL Report. DQL-RN 013

Robertson, C J*; Hazell, P J*; Gotts, P L*; Pickup, I M*; Morrell, R (2005) The effective hardness of hot pressed boron carbide with increasing shock stress. Ceram. Eng. Sci. Proc., 26 (7). pp. 151-159.

Rodger, A; Marrington, R*; Roper, D I*; Windsor, S A (2005) Circular dichroism spectroscopy for the study of protein ligand interactions. In: Protein-ligand interactions: methods and protocols. Humana Press Inc, pp. 343-364. ISBN 1588293726

Roebuck, B; Edwards, G J; Gee, M G (2005) Characterisation of oxidising metal surfaces with a two colour pyrometer. Meas. Sci. Technol., 21 (7). pp. 831-840.

Roebuck, B; Hamann, C*; Bennett, E G (2005) The palmqvist test for tough hardmetals. In: 16th International Plansee Seminar - High Performance PM Materials, 30 May - 3 June 2005, Reutte, Austria.

Roebuck, B; Stewart, M; Brooks, M (2005) Mapping indentation hardness. NPL Report. DEPC-MN 030

Rusby, R; De Podesta, M; Williams, J M (2005) Review of methods for a redetermination of the Boltzmann constant. NPL Report. DEPC-TH 006

S

Schöttl, S; Rusby, R L; Godfrin, H*; Meschke, M*; Goudon, V*; Triqueneaux, S*; Peruzzi, A*; de Groot, M J*; Jochemsen, R*; Bosch, W*; Hermier, Y*; Pitre, L*; Rives, C*; Fellmuth, B*; Engert, J* (2005) Evaluation of SRD1000 superconductive reference devices. J. Low Temp. Phys., 138 (3-4). pp. 941-946.

Seah, M P (2005) Accurate thickness measurements in thin films with surface analysis. Journal of Surface Analysis, 12. pp. 70-77.

Seah, M P (2005) Accurate thickness measurements in thin films with surface analysis. Journal of Surface Analysis, 12. pp. 70-77.

Seah, M P (2005) Erratum to 'An accurate semi-empirical equation for sputtering yields, II: for neon, argon and xenon ions' [Nucl. Instr. and Meth. B, 229 (2005) 348-358]. Nucl. Instrum. Methods Phys. Res. B, Beam Interact. Mater. At., 239 (3). pp. 286-287.

Seah, M P (2005) Erratum to 'An accurate semi-empirical equation for sputtering yields, II: for neon, argon and xenon ions' [Nucl. Instr. and Meth. B, 229 (2005) 348-358]. Nucl. Instrum. Methods Phys. Res. B, Beam Interact. Mater. At., 239 (3). pp. 286-287.

Seah, M P (2005) Ultrathin SiO2 on Si, VI:evaluation of uncertainties in thickness measurement using XPS. Surf. Interface Anal., 37. pp. 300-309.

Seah, M P (2005) An accurate semi-empirical equation for sputtering yields, II: for neon, argon and xenon ions. Nucl. Instrum. Methods Phys. Res. B, Beam Interact. Mater. At., 229 (3-4). pp. 348-358.

Seah, M P; Clifford, C A; Green, F M; Gilmore, I S (2005) An accurate semi-empirical equation for sputtering yields, I: for argon ions. Surf. Interface Anal., 37. pp. 444-458.

Seah, M P; Spencer, S J (2005) Ultrathin SiO2 on Si, VII: angular accuracy in XPS and an accurate attenuation length. Surf. Interface Anal., 37. pp. 731-736.

Sene, M (2005) Measurements for 'quality of life' at the UK National Physical Laboratory. Meas. Control, 38 (4). pp. 119-123.

Shaw, R M; Sims, G D (2005) Understanding compression testing of thick polymer matrix composites. NPL Report. DEPC-MN 019

Sheridan, B; Cumpson, P J; Bailey, M J A (2005) Metrology at the nano scale. Phys. World, 18 (8). pp. 37-40.

Shipley, D R; Palmans, H; Kacperek, A*; Baker, C* (2005) Geant4 simulation of an ocular proton beam and benchmark against other Monte Carlo codes. In: Proceedings of the Monte Carlo Method: Versatility Unbounded in a Dynamic Computing World, Monte Carlo Topical Meeting, 17 - 21 April 2005, Chattanooga, USA.

Sims, G D; Gnaniah, S J P (2005) Polymer composites - rate dependent temperature calibration of dynamic mechanical analysers (DMA) for Tg measurements. NPL Report. DEPC-MN 017

Szymaniec, K; Chalupczak, W; Whibberley, P B; Lea, S N; Henderson, D (2005) Evaluation of the primary frequency standard NPL-CsF1. Metrologia, 42 (1). pp. 49-57.

T

Tanner, R J*; Bartlett, D T*; Hager, L G*; Jones, L N; Molinos, C*; Roberts, N J; Taylor, G C; Thomas, D J (2005) Modelling of neutron survey instrument performance and experimental validation of those calculated response data. Radiat. Prot. Dosim., 116 (1-4). pp. 406-410.

Taskinen, P*; Dinsdale, A T; Gisby, J A (2005) Industrial slag chemistry: a case study of computational thermodynamics. Scand. J. Metall. (Denmark), 34 (2). pp. 100-7.

Taskinen, P*; Dinsdale, A T; Gisby, J A (2005) Industrial slag chemistry: a case study of computational thermodynamics. Scand. J. Metall. (Denmark), 34. pp. 100-107.

Theobald, P; Robinson, S P; Thompson, A D (2005) An optical method for hydrophone calibration. Acoust. Bull., 30 (6). pp. 18-22.

Theobald, P; Thompson, A D (2005) Towards a calibrated reference source for in-situ calibration of acoustic emission measurement systems. NPL Report. DQL-AC 012

Theobald, P D (2005) Feasibility study for in-plane displacement calibration of acoustic emission sensors. NPL Report. DQL-AC 014

Theobald, P D; Esward, T J; Dowson, S P (2005) Acoustic emission transducers - development of a facility for traceable out-of-plane displacement calibrations. Ultrasonics, 43 (5). pp. 343-350.

Theocharous, E (2005) Drifts exhibited by cryogenically cooled InSb infrared filtered detectors and their importance to the ATSR-2 and Landsat-5 Earth observation missions. Appl. Opt., 44 (20). pp. 4181-4185.

Theocharous, E (2005) Stability of the spectral responsivity of cryogenically cooled InSb infrared detectors. Appl. Opt., 44 (29). pp. 6087-6092.

Theocharous, E; Fox, N P (2005) Ageing effects in cryogenically cooled InSb infrared filtered detectors. Meas. Sci. Technol., 16. pp. 578-582.

Theocharous, E; Hawkins, G*; Fox, N P (2005) Reversible aging effects in cryogenically-cooled infrared filter radiometers. Infrared Phys. Technol., 46. pp. 339-349.

Theocharous, E; Ishii, J*; Fox, N P (2005) A comparison of the performance of a photovoltaic HgCdTe detector with that of a large area single pixel QWIP for infrared radionmetric applications. Infrared Phys. Technol., 46. pp. 309-322.

Thomas, D (2005) Uncertainties in radiation measurements. Radiat. Prot. Dosim., 117 (4). pp. 343-345.

Thomas, D J; Kolkowski, P (2005) Thermal fluence and dose equivalent standards at NPL. NPL Report. DQL-RN 008

Thompson, R; Howes, J (2005) The UK national standards of RF and microwave attenuation - a review. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Tomlins, P E; Leach, R K; Vadgama, P*; Mikhalovsky, S*; James, S* (2005) On the topographical characterisation of biomaterial surfaces. In: Surfaces and interfaces for biomaterials. Woodhead Publishing Ltd, pp. 693-716. ISBN 1855739305

Tomlins, P E; Rides, M; Dawson, A; Gee, M G; Dean, G D; Hobbs, C B; Allen, C R G; Gnaniah, S J P; Calver, A; Darling, R (2005) Physical characterisation of soft-touch polymers. NPL Report. DEPC-MPR 025

Tomlins, P H; Wang, R K* (2005) The potential of optical coherence tomography for geometric analysis and refractive index measurement of three dimensional structures. In: OFMC 2005 - 7th Optical Fibre Measurement Conference, 21-23 September 2005, NPL, UK.

Turnbull, A (2005) Electrochemical scanning probe microscopy - an overview. NPL Report. DEPC-MPE 011

Turnbull, A (2005) Integrity of short-peened high strength steel components in the context of residual stress relaxation and hydrogen uptake - a critique. NPL Report. DEPC-MPE 022

Turnbull, A (2005) Stress corrosion cracking of duplex stainless steels in concentrated brines - a critique of testing. NPL Report. DEPC-MPE 008

Turnbull, A; Zhou, S (2005) Impact of water chemistry transients on pitting and stress corrosion cracking of a steam turbine disc steel. NPL Report. DEPC-MPE 013

Tye, R P; Kubicar, L*; Lockmuller, N* (2005) The development of a standard for contact transient methods of measurement of thermophysical properties. Int. J. Thermophysics, 26 (6). pp. 1917-1938.

Tyler, D K; Baker, M I; Woods, M J* (2005) Comparison of Strontium-89 solution sources in UK hospitals, 2003. NPL Report. DQL-RN 012

V

Vargha, G; Milton, M J T; Cox, M G; Kamvissis, S (2005) Harmonisation of coupled calibration curves to reduce correlated effects in the analysis of natural gas by gas chromatography. Journal of Chromatography A, 1062. pp. 239-245.

W

Wheaton, A J; Georgakopoulos, D; Wright, P S (2005) The design of a fully automated system for the calibration of electronic AC/DC transfer instruments. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Wickham, M; Dusek, M; Zou, L; Hunt, C (2005) Effect of voiding on lead-free reliability. NPL Report. DEPC-MPR 033

Wickham, M; Zou, L; Dusek, M; Hunt, C (2005) Measuring the impact of component solderability on lead-free solder joint reliability. NPL Report. DEPC-MPR 038

Wickham, M; Zou, L; Dusek, M; Hunt, C (2005) Measuring the reliability of electronics assemblies during the transition period to lead-free soldering. NPL Report. DEPC-MPR 030

Wickham, M; Zou, L; Hunt, C (2005) Measuring the effect on isotropic electrically conductive adhesive reliability of substrate and component finishes. NPL Report. DEPC-MPR 031

Wickman, M; Fry, A T; Gohil, D D; Hunt, C (2005) Developing a test method to characterise internal stress in tin coatings: phase 2. NPL Report. DEPC-MPR 014

Woolliams, E R; Cox, M G; Harris, P M; Pegrum, H M (2005) Correcting for bandwidth effects in monochromator measurements. In: Newrad 2005 - 9th International Conference on New Developments and Applications in Optical Radiometry., 17-19 October 2005, Davos, Switzerland.

Wright, L; Robinson, S P; Humphrey, V F*; Hayman, G (2005) The application of boundary element methods at NPL to near-field acoustic measurements on cylindrical surfaces. NPL Report. DQL-AC 011

Wright, P S (2005) Accurate analysis of smoothly modulated AC waveforms applied to the calibration of fluctuating harmonic analyzers. IEEE Trans. Instrum. Meas., 54 (2). pp. 492-495.

Wright, P S (2005) Interharmonics analysis and measurement methods applied to mains frequency compliance testing. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Y

Yacoot, A (2005) Metrological applications of X-ray interferometry. In: Nanscale calibration standards and methods: dimensional and related measurements in the micro- and nanometer range. Wiley-VCH. ISBN 352740502X

Yacoot, A; Downes, M*; Flügge, J* (2005) Interferometric length measurement. MAPAN, J. Metrol. Soc. India, 20 (2). pp. 99-114.

Yip, J G M; Lee, M-H J*; Ridler, N M; Collier, R J* (2005) Towards a new form of national impedance standard for millimetre wavelengths using dielectric waveguide. In: BEMC 2005 - British Electromagnetic Measurements Conference, 14-17 November 2005, NPL, UK.

Yip, J G M; Lee, M-H J*; Ridler, N M; Collier, R J* (2005) The measurement of the characteristic impedance of transmission lines using nanoscale resistive films. In: 65th ARFTG Conference, 17 June 2005, Long Beach, CA, USA.

Z

Zhou, S; Turnbull, A (2005) Effect of stress transients on the crack propagation rate in steam disc steel. NPL Report. DEPC-MPE 017

Zhou, S; Turnbull, A (2005) Pitting and cracking of a steam turbine disc steel in out-of-specification water chemistry. NPL Report. DEPC-MPE 014

Zou, L; Hunt, C (2005) Development of preheat on solderability testing. NPL Report. DEPC-MPR 036

Zou, L; Hunt, C (2005) Solderability testing with components preheating. NPL Report. DEPC-MN 038

This list was generated on Thu Nov 14 10:25:33 2019 GMT.