< back to main site

Publications

Items where Year is 2006

Up a level
Export as [feed] RSS
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | O | P | R | S | T | U | V | W | Y | Z
Number of items: 258.

A

Alexander, M J (2006) Antenna calibration and the measurement of E-field strength. Compliance Engineering Annual Reference Guide.

Alexander, M J; Loh, T H (2006) Radiation above 1 GHZ from cables attached to a EUT. Compliance Engineering Magazine (July). on-line

Alexander, M J; Loh, T H (2006) Radiation above 1 GHZ from cables attached to a EUT. Compliance Engineering Magazine (July). on-line

Anhalt, K*; Hartmann, J*; Lowe, D; Machin, G; Sadli, M*; Yamada, Y* (2006) Thermodynamic temperature determination of Co-C. Pd-C, Pt-C and Ru-C eutectic fixed-point cells. Metrologia, 43 (2). S78-83

Arnaut, L R (2006) Effect of size, orientation and eccentricity of mode stirrers on their performance in reverberation chambers. IEEE Trans. Electromagn. Compat., 48 (3). pp. 600-602.

Arnaut, L R (2006) Electromagnetic self-adaptive surfaces with shielded external support system. Proc. R. Soc. Lond. A, 462 (2068). pp. 1053-1080.

Arnaut, L R (2006) Quantifying the rate of fluction of stochastic EM fields in time-varying environments. In: Proc. EMC Europe 2006 - Workshop on Statistics in EMC Measurements and Predictions, 4-8 September 2006, Barcelona, Spain.

Arnaut, L R (2006) Spatial correlation functions of inhomogeneous random electromagnetic fields. Phys. Rev. E, Stat. Nonlinear Soft Matter Phys., 73 (3). 036604

Arnaut, L R (2006) Spatial correlation functions of random electromagnetic fields in the presence of a semi-infinite isotropic medium. Phys. Rev. E, Stat. Nonlinear Soft Matter Phys., 74. 056610

Arnaut, L R (2006) Time-domain measurement and analysis of mechanical step transitions in mode-tuned reverberation. NPL Report. DEM-EM 012

Arnaut, L R; West, P D* (2006) Electromagnetic reverberation near a perfectly conducting boundary. IEEE Trans. Electromagn. Compat., 48 (2). pp. 359-371.

Assael, M J*; Kakosimos, K*; Banish, R M*; Brillo, J*; Egry, I*; Brooks, R F; Quested, P N; Mills, K C; Nagashima, A*; Sato, Y*; Wakeman, W A* (2006) Reference data for the density and viscosity of liquid aluminium and liquid iron. J. Phys. Chem. Ref. Data, 35 (1). pp. 285-300.

Awan, S A; Kibble, B P (2006) High-frequency calculable impedance standards. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Awan, S A; Kibble, B P (2006) High-frequency calculable impedance standards. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Awan, S A; Peterson, K D* (2006) Bridge circuits. In: McGraw-Hill 2006 Yearbook of Science and Technology. McGraw-Hill. ISBN 0071462058

B

Baglin, C M*; MacMahon, T D (2006) Data evaluation of 56Co e+ß+ decay. NPL Report. DQL-RN 010

Baker, C*; Shipley, D R; Palmans, H; Kacperek, A* (2006) Monte Carlo modelling of a clinical proton beam-line for the treatment of ocular tumours. Nucl. Instrum. Methods Phys. Res. A, Accel. Spectrom. Detec. Assoc. Equip., 532. pp. 1005-1008.

Barker, R M (2006) XML for data curation. NPL Report. DEM-ES 008

Barker, R M; Harris, P M; Parkin, G I (2006) Software Support for Metrology Best Practice Guide No 7 - development and testing of spreadsheet applications. NPL Report. DEM-ES 013

Barker, R M; Parkin, G I (2006) Software Support for Metrology Good Practice Guide No. 19 - Internet-enabled metrology systems. NPL Report. DEM-ES 012

Barwood, G P; Gill, P; Klein, H A; Huang, G; Walton, B R (2006) An optical frequency standard based on a transition in a single trapped strontium ion. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Barwood, G P; Gill, P; Klein, H A; Huang, G; Walton, B R (2006) An optical frequency standard based on a transition in a single trapped strontium ion. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Barwood, G P; Huang, G; Klein, H A; Margolis, H S; Lea, S N; Szymaniec, K; Chalupczak, W; Gill, P (2006) An optical frequency standard based on a transition in a single trapped strontium ion. In: Optical Frequency Combs for Space International Workshop, 2-3 October 2006, NPL, UK.

Bauch, A*; Achkar, J*; Bize, S*; Calonico, D*; Dach, R*; Hlavac, R*; Lorini, L*; Parker, T*; Petit, G*; Piester, D; Szymaniec, K; Uhrich, P* (2006) Comparison between frequency standards in Europe and the USA at the 10-15 uncertainty level. Metrologia, 43 (1). pp. 109-120.

Bayliss, D J; Leach, R K; Hall, M J (2006) Development of an electromagnetic spring for use with a high accuracy surface texture measuring probe. NPL Report. DEPC-EM 006

Behr, R*; Palafox, L*; Funck, T*; Williams, J M; Patel, P; Katkov, A (2006) Synthesis of precision calculable AC waveforms. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Behr, R*; Palafox, L*; Funck, T*; Williams, J M; Patel, P; Katkov, A (2006) Synthesis of precision calculable AC waveforms. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Berry, J; Downes, S P (2006) An investigation into the effect of marking mass standards of OIML class E1. NPL Report. DEPC-EM 002

Bich, W*; Cox, M G; Harris, P M (2006) Evolution of the 'Guide to the Expression of Uncertainty in Measurement'. Metrologia, 43. S161-S166

Blackburn, J F; Cain, M G (2006) Nonlinear piezoelectric resonance: a theoretically rigorous approach to constant I-V measurements. J. Appl. Phys., 100. 114101

Bowen, C R*; Dent, A C*; Nelson, L J*; Stevens, R*; Cain, M G; Stewart, M (2006) Failure and volume fraction dependent mechanical properties of composites sensors and actuators. Proc. Inst. Mech. Eng. C, J. Mech. Eng. Sci., 220 (11). pp. 1655-1664.

Bowen, C R*; Nelson, L J*; Stevens, R*; Cain, M G; Stewart, M (2006) Optimisation of interdigitated electrodes for piezoelectric actuators and active fibre composites. J. Electroceram., 16 (4). pp. 263-269.

Bowen, C R*; Stevens, R*; Nelson, L J*; Dent, A C*; Dolman, G*; Su, B*; Button, T W*; Cain, M G; Stewart, M (2006) Manufacture and characterization of high activity piezoelectric fibres. Smart Mater. Struct., 15 (2). pp. 295-301.

Brennan, J K*; Crampton, A*; Jiang, X*; Leach, R K; Harris, P M (2006) Propagation of uncertainty in discretely sampled surface roughness profiles. In: Proceedings of the International Workshop on Advanced Mathematical and Computational Tools in Metrology VII, 2006.

Brice, L (2006) Determination of sensitivity coefficients for Rockwell hardness scales HR15N, HR30N and HRA. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Broughton, W R (2006) In-plane testing of thick composites: a review. NPL Report. DEPC-MPR 057

Broughton, W R; Crocker, L E; Lodeiro, M J (2006) Characterising micro and nanoscale interfaces in advanced composites: a review. NPL Report. DEPC-MPR 055

Broughton, W R; Nunn, J (2006) Non-invasive methods for monitoring microstructural condition of materials. NPL Report. DEPC-MPE 032

Brown, A; Quincey, P (2006) Gravimetry of ambient air monitoring filters: development of an optimised weighing protocol and selection of filter materials. VAM Bulletin, 35. pp. 23-26.

Brown, A (ed) (2006) Proposals for the 2006-2009 Valid Analytical Measurement (VAM) Physical Programme. Version for public comment. NPL Report. DQL-AS 025

Brown, A S (2006) Standards in odorant emissions analysis. Local Authority Waste and Management (June). pp. 18-19.

Brown, A S; Yardley, R E; Quincey, P G; Butterfield, D M (2006) Studies of the effect of humidity and other factors on some different filter materials used for gavimetric measurements of ambient particulate matter. Atmos. Environ., 40. pp. 4670-4678.

Brown, A S (editor) (2006) The 2006-2009 VAM-Physical Programme: version for public release. NPL Report. DQL-AS 034

Brown, E; Hao, L; Gallop, J C; Macfarlane, J C; Josephs-Franks, P W; Cohen, L F* (2006) The effect of molecular oxygen on the thermal conductance of multi-walled nanotubes - a preliminary investigation. Phys. Stat. Sol. B, 243 (13). pp. 3380-3384.

Brown, R J C (2006) Double anonymity and the peer review process. The Scientific World (6). pp. 1274-1277.

Brown, R J C (2006) To know or not to know. Chemistry and Industry (5). p. 17.

Brown, R J C (2006) To know or not to know: the process of peer review for submissions to scientific journals. Electrochemistry Newsletter, 113 (April). pp. 8-10.

Brown, R J C (2006) A breath of fresh air.

Brown, R J C (2006) The reviewer's role. Chemistry and Industry (4). p. 17.

Brown, R J C (2006) The risk of meeting a hazard. School Science Review, 88 (322). p. 17.

Brown, R J C; Brett, D J L* (2006) Electrochemical study of biotin-modified self-assembled monolayers: recommendations for robust preparation. The Scientific World Journal, 6. pp. 20-29.

Brown, R J C; Edwards, P R* (2006) The effect of the physical matrix on accurate measurements using fixed volume analytical techniques. Journal of Separation Science, 29 (13). pp. 2072-2077.

Brown, R J C; Harrision, N J; Brown, A S; Yardley, R E; Velummylum, D (2006) Report to the Department of Environment, Food and Rural Affairs by the National Physical Laboratory: annual report for 2004 on the UK Heavy Metals Network. NPL Report. DQL-AS 024

Brown, R J C; Milton, M J T (2006) Stripping voltammetry as a possible primary method for amount of substance. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Brown, R J C; Shaw, M C*; Roberts, M R* (2006) Practical methodology for the solubility speciation analysis of ambient dust deposits for heavy metals: application to a 6-month measurement campaign. Int. J. Environ. Anal. Chem., 86 (6). pp. 453-460.

Brown, R J C; Wang, J; Tantra, R; Yardley, R E; Milton, M J T (2006) Electromagnetic modelling of Raman enhancement from nanoscale substrates: a route to estimation of the magnitude of the chemical enhancement mechanism in SERS. Faraday Discuss., 132. pp. 201-213.

Brown, R J C; Williams, M; Butterfield, D M; Yardley, R E; Muhunthan, D; Woods, P T (2006) Annual report for 2005 on the UK Heavy Metals Network. NPL Report. DQL-AS 026

Brown, R J C; Yardley, R E; Brown, A S; Edwards, P R; Rivier, C*; Yardin, C* (2006) Analytical methodologies with very low blank levels: implications for practical and empirical evaluations of the limit of detection. Analytical Letters, 39 (6). pp. 1229-1241.

Brownnutt, M; Wilpers, G; Gill, P; Thompson, R C*; Sinclair, A G (2006) Zero-point cooling and heating rate measurements of a single strontium 88 ion. In: Optical Frequency Combs for Space International Workshop, 2-3 October 2006, NPL, UK.

Burch, H J; Davies, J A; Brown, E; Hao, L; Antoranz Contera, S*; Grobert, N*; Ryan, J F* (2006) Electrical conductance and breakdown in individual CNx multiwalled nanotubes. Appl. Phys. Lett., 89. 143110

Burns, D T*; Allisy-Roberts, P J*; Desrosiers, M F*; Nagy, V Yu*; Sharpe, P H G; Laitano, R F*; Mehta, K*; Schneider, M K H*; Zhang, Y L* (2006) CCRI supplementary comparison of standards for absorbed dose to water in 60Co gamma radiation at radiation processing dose levels. Radiat. Phys. Chem., 75 (9). pp. 1087-1092.

Butterfield, D M; Quincey, P (2006) A study of methods for reducing the effect of static charge when weighing filters. NPL Report. DQL-AS 033

Butterfield, D M; Whiteside, K; Quincey, P (2006) UK non-automatic hydrocarbon network: annual report for 2005. NPL Report. DQL-AS 027

Buttle, D J*; Moorthy, V*; Shaw, B*; Lord, J D (ed) (2006) Determination of residual stresses by magnetic methods. Measurement Good Practice Guide. 88

C

Callendar, M J*; Efstathiou, A*; King, C W*; Walker, D D*; Gee, A E*; Lewis, A J; Oldfield, S; Steel, R M (2006) A 1m swing arm profilometer for large telescope mirror element. In: Proc. ASPE 2006 Annual Meeting, October 2006, Moterey, CA, USA.

Callender, M J*; Efstathiou, A*; King, C W*; Walker, D D*; Gee, A E*; Lewis, A J; Oldfield, S; Steel, R M (2006) A swing arm profilometer for large telescope mirror element metrology. Proc. SPIE - Int. Soc. Opt. Eng., 6273. 62732R

Cheung, J Y (2006) Made to measure. Phys. World, 19 (8). pp. 40-41.

Cheung, J Y; Chunnilall, C J; Fox, N P (2006) Detecting photons - properties and challenges. Nucl. Instrum. Methods Phys. Res. A, Accel. Spectrom. Detec. Assoc. Equip., 567. pp. 100-103.

Clarke, P J (2006) Regular transmittance measurements. Measurement Good Practice Guide. 97

Clarke, P J (2006) Surface colour measurements. Measurement Good Practice Guide. 96

Clifford, C A; Seah, M P (2006) Interlaboratory comparison of reduced modulus measurement of polymers at the nanoscale using an AFM or a nanoindenter - protocol for analysis. NPL Report. DQL-AS 030

Clifford, C A; Seah, M P (2006) Modelling of nanomechanical nanoindentation measurements using an AFM or nanoindenter for compliant layers on stiffer substrates. Nanotechnology, 17. pp. 5283-5292.

Collins, S M; Lee, C (2006) Third IRMF comparison of surface contamination monitor calibrations 2004 - 2005. NPL Report. DQL-RN 016

Cox, M G; Eio, C P; Mana, G*; Pennecchi, F* (2006) The generalized weighted mean of correlated quantities. Metrologia, 43. S268-S275

Cox, M G; Harris, P M (2006) Measurement uncertainty and traceability. Meas. Sci. Technol., 17 (3). pp. 533-540.

Cox, M G; Harris, P M (2006) Software specifications for uncertainty evaluation. NPL Report. DEM-ES 010

Cox, M G; Siebert,B R L*, (2006) The use of Monte Carlo method for evaluating uncertainty and expanded uncertainty. Metrologia, 43. S178-S188

Cox. M G,, ; Harris, P M (2006) Software Support for Metrology Best Practice Guide No 6 - uncertainty evaluation. NPL Report. DEM-ES 011

D

Dawe, A S*; Smith, B*; Thomas, D W P*; Greedy, S*; Vasic, N*; Gregory, A P; Loader, B G; de Pomerai, D I* (2006) A small temperature rise may contribute towards the apparent induction by microwaves of heat-shock gene expression in the nematode Caenorhabditis elegans. Bioelectromagnetics, 27 (2). pp. 88-97.

Dawson, A; Rides, M; Nottay, J (2006) The effect of pressure on the thermal conductivity of polymer melts. NPL Report. DEPC-MPR 041

Dean, G D (2006) Modelling non-linear creep behaviour of an epoxy adhesive. NPL Report. DEPC-MPR 052

Dean, G D; Crocker, L E (2006) Prediction of the impact performance of plastics mouldings. NPL Report. DEPC-MPR 043

Dean, G D; Crocker, L E (2006) Prediction of the impact performance of plastics using finite element methods. Measurement Good Practice Guide. 87

Dean, J C J (2006) A study of options for the management of liquid scintillation waste. Appl. Radiat. Isot., 64 (10-11). p. 1520.

Decker, J E*; Lewis, A J; Cox, M G; Steele, A G*; Douglas, R J* (2006) Evaluating results of international comparisons: worked example of CCL-K2 comparison of long gauge block calibration. In: IMEKO World Congress 2006, September 2006, Rio de Janeiro.

Dinsdale, A T (2006) Thermodynamic data for ionic liquids - needs and availability. NPL Report. DEPC-MPE 031

Dusek, M; Hunt, C P (2006) Statistical analysis of the effect of PCB finish and processing solder joint on integrity. NPL Report. DEPC-MPR 047

Dusek, M; Hunt, C P (2006) Test approach to isothermal fatigue measurements for lead-free solders. NPL Report. DEPC-MPR 048

de Vreede, J P M*; Ridler, N M (2006) Beadless air lines as phase standards. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

de Vreede, J P M*; Ridler, N M (2006) Beadless air lines as phase standards. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

E

Edwards, C S; Margolis, H S; Barwood, G P; Lea, S N; Gill, P; Rowley, W R C (2006) Development of a pair of 1.5 micron NICE ohms frequency standards. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Eio, C P; Cox, M G (2006) Problems of correlation in key comparisons. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Eio, C P; Cox, M G (2006) Problems of correlation in key comparisons. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Eio, C P; Protheroe, S; Ridler, N M (2006) Characterising beadless air lines as reference artefacts for S-parameter measurements at RF and microwave frequencies. IEE Proc. Sci. Meas. Technol., 153 (6). pp. 229-234.

F

Flack, D R; Hannaford, J (2006) Fundamental good practice in dimensional metrology. Measurement Good Practice Guide. 80

Fletcher, N E; Giblin, S P; Williams, J M; Lines, K J (2006) New capability for generating and measuring small DC currents at NPL. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Flowers, J L; Baird, P E G*; Bougueroua, L; Klein, H A; Margolis, H S (2006) The NPL Rydberg constant experiment. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Forbes, A B (2006) Uncertainty evaluation associated with fitting geometric surfaces to coordinate data. Metrologia, 43. S282-S290

Forbes, A B; Cooper, P*; Mason, J* (2006) Approximation with asymptotic polynomials. In: Algorithms for Approximation: Proceedings of the 5th International Conference., July 2005, Chester, UK.

G

Gadd, R*; Baker, M; Nijran, K S*; Owens, S*; Thomas, W*; Woods, M J*; Zananiri, F* (2006) Protocol for establishing and maintaining the calibration of medical radionuclide calibrators and their quality control. Measurement Good Practice Guide. 93

Gant, A J (2006) Ball indentation fatigue of powder metallurgy steels. NPL Report. DEPC-MPE 023

Gardiner, T D; Coleman, M D; Banerji, M; Leggett, G A; Milton, M J T; Woods, P T (2006) Validation of infrared spectroscopic methods for high-accuracy measurements of gases. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Gardner, J L (2006) Uncertainties in surface colour measurements. Measurement Good Practice Guide. 95

Gee, M G; Hutchings, I M*; Santner, E* (2006) Friction and wear. In: Handbook of Materials Measurement Methods. Springer. ISBN 9783540207856

Georgakopoulos, D; Williams, J M; Knott, A J; Esward, T J; Wright, P S (2006) Dynamic characterisation of the electronic instrumentation used in the calibration of fatigue testing machines. IEE Proc. Sci. Meas. Technol., 153 (6). pp. 256-259.

Georgakopoulos, D; Wright, P S (2006) Calibration of energy and power meters under non-sinusoidal conditions. IEE Proc. Sci. Meas. Technol., 153 (6). pp. 241-247.

Georgakopoulos, D; Wright, P S (2006) Exercising the dynamic range of power meters under non-sinusoidal conditions. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Georgakopoulos, D; Wright, P S (2006) Exercising the dynamic range of power meters under non-sinusoidal conditions. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Giblin, S P; Belliss, J H; Williams, J M (2006) An automated coaxial bridge for calibration of AC resistors. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Giblin, S P; Belliss, J H; Williams, J M (2006) An automated coaxial bridge for calibration of AC resistors. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Giblin, S P; Janssen, T J B M; Nash, G R*; Buckle, P D*; Buckle, L*; Emeny, M T* (2006) Indium antimonide quantum Hall effect. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Giblin, S P; Janssen, T J B M; Nash, G R*; Buckle, P D*; Buckle, L*; Emeny, M T* (2006) Indium antimonide quantum Hall effect. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Gilby, J*; Walton, J*; Esward, T J; Harris, P M; Wright, L (2006) Software Support for Metrology good practice guide No.13: data visualisation. NPL Report. DEM-ES 009

Gilmore, I S; Green, F M; Seah, M P (2006) G-SIMS-FPM: Molecular structure at surfaces - a combined positive and negative secondary ion study. Appl. Surf. Sci., 252 (19). pp. 6601-6604.

Goodman, T M; Gibbs, D R; Cook, G* (2006) Better lighting for improved human performance, health and well-being and increased energy efficiency - a scoping study for CIE-UK. NPL Report. DQL-OR 019

Grant, P V; Lord, J D; Whitehead, P S* (2006) The measurement of residual stresses by the incremental hole drilling technique. Measurement Good Practice Guide. 53

Green, F; Gilmore, I S; Seah, M P (2006) TOF-SIMS: accurate mass scale calibration. J. Am. Soc. Mass Spectrom., 17 (4). pp. 514-523.

Green, F M; Gilmore, I S; Seah, M P (2006) Mass accuracy - TOF-SIMS. Appl. Surf. Sci., 252 (19). pp. 6591-6593.

Green, F M; Lee, J L S; Gilmore, I S; Seah, M P (2006) VAMAS 2006: static SIMS interlaboratory study for intensity repeatability, mass scale accuracy and relative quantification - protocol for anaylisis. NPL Report. DQL-AS 029

Greenwood, J C (2006) Simulation of the operation and characteristics of static expansion pressure standards. Vacuum, 80. pp. 548-553.

Greenwood, J C (2006) The reference gauge technique for static expansion rations- applied to NPL medium vacuum standard SEA3. Vacuum, 81 (4). pp. 427-433.

Gregory, A P; Clarke, R N (2006) Monte-Carlo simulation of the uncertainties of coaxial sensor dielectric measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Gregory, A P; Clarke, R N (2006) Monte-Carlo simulation of the uncertainties of coaxial sensor dielectric measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Gregory, A P; Clarke, R N (2006) A review of RF and microwave techniques for dielectric measurements on polar liquids. IEEE Trans. Dielectr. Electr. Insul., 13 (4). pp. 727-743.

H

Hanson, A R (2006) Good practice guide for the measurement of gloss. Measurement Good Practice Guide. 94

Hao, L; Gallop, J C; Chen, J*; Macfarlane, J C*; Langham, C D (2006) Coupled resonators for sensitive detection: beyond bolometers. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Hao, L; Gallop, J C; Chen, J*; Macfarlane, J C*; Langham, C D (2006) Coupled resonators for sensitive detection: beyond bolometers. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Hao, L; Gallop, J C; MacFarlane, J; Palmans, H; Sander, T; Duane, S (2006) Low-temperature calorimetry for ionising radiation dosimetry. NPL Report. DEM-TQD 008

Hao, L; Macfarlane, J C; Gallop, J C; Lam, S K H (2006) Direct measurement of penetration length in ultrathin and/or mesoscopic superconducting structures. J. Appl. Phys., 99. 123916

Hao, L; Macfarlane, J C*; Gallop, J C; Cox, D*; Hutson, D*; Josephs-Franks, P W; Chen, J*; Lam, S K H* (2006) Novel methods of fabrication and metrology of superconducting nano-structures. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Hao, L; Macfarlane, J C*; Gallop, J C; Cox, D*; Hutson, D*; Josephs-Franks, P W; Chen, J*; Lam, S K H* (2006) Novel methods of fabrication and metrology of superconducting nano-structures. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Harris, P M; Cox, M G; Korczynski, J* (2006) Convolution and uncertainty evaluation. In: Advanced Mathematical and Computational Tools in Metrology. World Scientific Publishing, pp. 188-195. ISBN 9812566740

Harris, P M; Lines, K J; Smith, I M (2006) Testing the numerical correctness of software. NPL Report. DEM-ES 004

Hawkes, N P (2006) United Kingdom Nuclear Science Forum. Progress report - data studies during 2003 and 2004. NPL Report. DQL-RN 014

Hinds, G; Turnbull, A (2006) Testing of supermartensitic stainless steel welds under cathodic protection at very low strain rates. Corrosion, 62 (5). pp. 371-374.

Hosaka, K; Webster, S A; Stannard, A; Margolis, H S; Lea, S N; Walton, B R; Gill, P (2006) An 171Yb+ optical frequency standard at 467 nm. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Hosaka, K; Webster, S A; Stannard, A; Margolis, H S; Lea, S N; Walton, B R; Gill, P (2006) An 171Yb+ optical frequency standard at 467 nm. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Humphreys, D A (2006) Vector measurement of modulated RF signals by an in-phase and quadrature referencing technique. IEE Proc. Sci. Meas. Technol., 153 (6). pp. 210-215.

Humphreys, D A; Grosche, G*; Eggert, M*; Peterson, J C*; Henningsen, J*; Skipper, B F* (2006) Transmission of active and passive optical reference signals over a 16 channel, 534.4 km WDM optical fibre network. IEE Proc., Optoelectron., 153 (5). pp. 256-261.

J

Jennett, N M (2006) Mechanical testing of coatings. In: Surface coatings for protection against wear. Woodhead Publishing. ISBN 9781855737679

Jennett, N M; Pharr, G M*; McHargue, C J* (2006) Instrumented indentation testing in materials research and development. Philos. Mag., 86 (33-35). pp. 5153-5154.

Ji, W*; Pointer, M R; Luo, R M*; Dakin, J* (2006) Gloss as an aspect of the measurement of appearance. J. Opt. Soc. Am. A, 23 (1). pp. 22-33.

Johansson, L C; Stroak, A J (2006) Kr-81m calibration factor for the NPL ionisation chamber. Appl. Radiat. Isot., 64. pp. 1360-1364.

K

Kibble, B P; Kotter, F R*; Rayner, G H*; Awan, S A (2006) Capacitance measurements. In: McGraw-Hill 2006 Yearbook of Science and Technology. McGraw-Hill. ISBN 0071462058

Kleinschmidt, P; Giblin, S P; Antonov, V*; Hashiba, H*; Kulik, L*; Tzalenchuk, A; Komiyama, S* (2006) A highly sensitive detector for radiation in the terahertz region. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Knott, A J; Ibrahim, M*; Hasan, E*; Aggag, G* (2006) Comparison of force standards between NIS-Egypt and NPL - United Kingdom. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Koukoulas, T; Barham, R G (2006) Transient response of the IEC 60318-1 artificial ear. NPL Report. DQL-AC 016

Kovacich, R P*; Martin, N A; Clift, M G; Stocks, C*; Gaskin, I*; Hobby, J* (2006) Highly accurate measurement of oxygen using a paramagnetic sensor. Meas. Sci. Technol., 17. pp. 1579-1585.

L

Lacey, A J*; Loveday, M S*; Mahon, G J*; Roebuck, B; Sellars, C M*; van der Winden, M R* (2006) Measuring flow stress in hot plane strain compression tests. Mater. High Temp., 23 (2). pp. 85-118.

Lao, R-R*; Liang, W-L*; Dudley, R A; Thompson, R (2006) High sensitivity optically modulated scatter for electromagnetic field measurement. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Lao, R-R*; Liang, W-L*; Dudley, R A; Thompson, R (2006) High sensitivity optically modulated scatter for electromagnetic field measurement. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Leach, R K; Chetwynd, D*; Blunt, L*; Haycocks, J; Harris, P M; Jackson, K; Oldfield, S; Reilly, S (2006) Recent advances in traceable nanoscale dimension and force metrology in the UK. Meas. Sci. Technol., 17. pp. 467-476.

Leach, R K; Harris, P M (2006) Softgauges for surface texture. Qual. Today (March). pp. 12-14.

Leach, R K; Oldfield, S; Georgakopoulos, D (2006) Traceable nanonewton force measurement at the National Physical Laboratory, UK. In: euspan 6th International Conference and 8th Annual Meeting of the European Society for Precision Engineering and Nanotechnology, 28 May -1 June 2006, Vienna, Austria.

Letchumanan, V; Wilpers, G; Brownnutt, M; Gill, P; Sinclair, G (2006) Zero-point cooling and heating rate measurements of a single strontium 88 ion. In: Optical Frequency Combs for Space International Workshop, 2-3 October 2006, NPL, UK.

Lewis, A; Oldfield, S; Callender, M*; Efstathiou, A*; Gee, A*; King, C*; Walker, D* (2006) Arcuate arm profilometry - traceable metrology for large mirrors. In: Symposium of Metrology 2006, 25-27 October 2006, Mexico.

Lewis, A J (2006) Final report on EUROMET key comparison EUROMET.L-K2: calibration of long gauge blocks. Metrologia, 43 (Tech. ). 04003.

Loader, B G; Loh, T H; Goodall, E; Knight, D J E; Bownds, D; Gentle, D G; Alexander, M J (2006) Comparison of electric field strength standards at NPL. NPL Report. DEM-EM 011

Loveday, M S*; Roebuck, B (2006) Metallic materials: measurement of high temperature flow stress at medium to high strain rates. A general introduction. Mater. High Temp., 23 (2). pp. 55-58.

Lowe, D; Yamada, Y* (2006) Reproducible metal-carbon eutectic fixed-points. Metrologia, 43 (2). S135-139

M

Ma, L S*; Picard, S*; Zucco, M*; Chartier, J-M*; Robertsson, L*; Balling, P*; Krin, P*; Jin Qian*,, ; Zhongyou Liu*,, ; Chunying Shi*,, ; Alonso, M V*; Gan Xu*,, ; Siew Leng Tan*,, ; Nyholm, K*; Henningsen, J*; Hald, J*; Rowley, W R C; Barwood, G P; Windeler, R* (2006) Absolute frequency measurement of the R(12) 26-0 and R(106) 28-0 transitions in 127I2 at =543nm. IEEE Trans. Instrum. Meas., 55 (3). pp. 876-880.

Machin, G (2006) A paradigm change in high temperature metrology. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Machin, G; Rusby, R L; McEvoy, H C; Simpson, R (2006) Traceability and calibration in temperature measurement: a clinical necessity. J. Med. Eng. Technol., 30 (4). pp. 212-217.

Mackechnie, C; Simpson, R (2006) Traceable calibration for blood pressure and temperature monitoring. Nursing Standard, 21 (11). pp. 42-47.

Maletras, F; Gournay, P*; Robinson, I A; Genevès, G* (2006) A bias source for dynamic voltage measurements with a programmable Josephson junction array. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Maxwell, A S; Broughton, W R; Lodeiro, M J (2006) Review of techniques for the characterisation of residual stress in polymer composites. NPL Report. DEPC-MPR 056

McEwen, M*; Palmans, H; Williams, A* (2006) An empirical method for the determination of wall perturbation factors for parallel-plate chambers in high-energy electron beams. Phys. Med. Biol., 51 (20). pp. 5167-5181.

Medin, J*; Ross, C K*; Klassen, N V*; Palmans, H; Grusell, E*; Grindborg, J-E* (2006) Experimental determination of beam quality factors, kQ, for two types of Farmer chambers in 10 MV photon and a 175 MeV proton beam. Phys. Med. Biol., 51. pp. 1503-1521.

Miller, P; Goodman, T M; Hall, S (2006) Standardardization requirements and safety concerns drive LED test and measurement developments. LED Magazine Review (April). 11, 14-15

Milton, M J T (2006) Metrology for chemical measurements of the environment. Proc Int Sch "Enrico Fermi", CLXVI. pp. 549-572.

Milton, M J T; Guenther, F*; Miller, W R*; Brown, A S (2006) Validation of the gravimetric values and uncertainties of independently prepared primary standard gas mixtures. Metrologia, 43. L7-L10

Milton, M J T; Harris, P M; Smith, I M; Brown, A S; Goody, B A (2006) Implementation of a generalized least-squares method for determining calibration curves from data with general uncertainty structures. Metrologia, 43. S291-S298

Milton, M J T; Wang, J (2006) Application of the IDMS curve method to analytical measurement. Accred. Qual. Assur., 11. pp. 195-198.

Mingard, K P; Bennett, E G; Ive, A J; Roebuck, B (2006) Microstructure mapping in high temperature compression testpieces - grain size metrology by electron back scatter diffraction. NPL Report. DEPC-MN 037

Morrell, R (2006) Fracture toughness testing for advanced technical ceramics - internationally agreed good practice. Adv. Appl. Ceram., 105 (2). pp. 88-98.

Morrell, R; Gant, A J; Jennett, N M (2006) Characterising surface damage in advanced technical ceramics. NPL Report. DEPC-MPE 027

Morrell, R; Quested, P N; Jones, S*; Ford, D A* (2006) Studio Project: DISIC - Dimensional stability of ceramic casting moulds. NPL Report. DEPC-MPE 026

O

Ogaki, R*; Green, F M; Li, S*; Vert, M*; Alexander, M R*; Gilmore, I S; Davies, M C* (2006) G-SIMS of biodegradable homo-polyesters. Appl. Surf. Sci., 252 (19). pp. 6797-6800.

Osgerby, S; Banks, J P (2006) Experimental aspects of small punch testing at elevated temperatures. NPL Report. DEPC-MPE 029

Osgerby, S; Shingledecker, J* (2006) UK-US collaborative programme - advanced materials for low emission power plant. Review of standards for measurement of high temperature materials properties. NPL Report. DEPC-MPE 028

Ovchinnikov, Y B (2006) Coherent manipulation of atoms by copropagating laser beams. Phys. Rev. A, At. Mol. Opt. Phys., 73. 033404

P

Palaniappan, J*; Wang, H*; Ogin, S L*; Thorne, A*; Reed, G T*; Tjin, S C*; McCartney, L N (2006) Prediction of the reflected spectra from chirped fibre Bragg gratings embedded within cracked crossply laminates. Meas. Sci. Technol., 17. pp. 1609-1614.

Palmans, H (2006) Effective water depth of an ionization chamber in a proton beam: analytical model. NPL Report. DQL-RD 002

Palmans, H (2006) Perturbation factors for cylindrical ionisation chambers in proton beams. Part I Corrections for gradients. Phys. Med. Biol., 51 (14). pp. 3483-3501.

Palmans, H; Thomas, R A S; Kacperek, A* (2006) Ion recombination correction in the Clatterbridge Centre of Oncology clinical proton beam. Phys. Med. Biol., 51. pp. 903-917.

Palmans, H; Thomas, R A S; Shipley, D R; Kacperek, A* (2006) Light-ion beam dosimetry. NPL Report. DQL-RD 003

Pearce, J; Thomas, R A S; DuSautoy, A R (2006) The characterization of the Advanced Markus ionization chamber for use in reference electron dosimetry in the UK. Phys. Med. Biol., 51 (3). pp. 473-483.

Pegrum, H M; Montgomery, R; Fox, N P; Mountford, J R; Salim, S; Woolliams, P D; Pointer, M R; Crane, L; Chapman, M (2006) Expedia's best blue sky: experiment and results. NPL Report. DQL-OR 018

Plass-Dülmer, C*; Schmidbauer, N*; Slemr, J*; Slemr, F*; D'Souza, H (2006) European hydrocarbon intercomparison experiemnt AMOHA part 4: canister sampling of ambient air. J. Geophys. Res., 111 (D4). D04306

Pointer, M R (2006) Area array characterisation. NPL Report. DQL-OR 016

Pointer, M R (2006) MAVISCAL: Digital camera calibration for wound measurement - colour characterisation. NPL Report. DQL-OR 014

Pointer, M R (2006) Small area colorimetry. NPL Report. DQL-OR 015

Portoles, J F*; Cumpson, P J; Hedley, J*; Allen, S*; Williams, P M*; Tendler, S J B* (2006) Accurate velocity measurements of AFM-cantilever vibrations by doppler interferometry. J. Experimental Nanoscience, 1 (1). pp. 51-62.

Pratt, B*; Robinson, A D (2006) A comparison between supported and unsupported beams for use in static torque calibrations. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

R

Reilly, S P; Leach, R K (2006) Critical review of seismic vibration isolation techniques. NPL Report. DEPC-EM 007

Reilly, S P; Leach, R K; Cuenat, A; Awan, S A; Lowe, M (2006) Overview of MEMS sensors and the metrology requirements for their manufacture. NMS Programme for Engineering Measurement 2005-2008. NPL Report. DEPC-EM 008

Rides, M; Allen, C R G (2006) Slip flow measurement by capillary extrusion rheometry. Measurement Good Practice Guide. 90

Rides, M; Fleming, D; Allen, C R G (2006) Polymer flow incorporating slip and implications for polymer processing simulations. NPL Report. DEPC-MN 040

Rietveld, G*; Williams, J M; Houtzager, E*; Janssen, T J B M (2006) Automated CCC bridge for precision resisance measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Rietveld, G*; Williams, J M; Houtzager, E*; Janssen, T J B M (2006) Automated CCC bridge for precision resisance measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Kibble, B P (2006) The NPL Watt Balance: modifications and new measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Kibble, B P (2006) The NPL Watt Balance: modifications and new measurements. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Lovelock, P (2006) The design of the third generation NPL Watt Balance. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, I A; Lovelock, P (2006) The design of the third generation NPL Watt Balance. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Robinson, S P; Harris, P M; Ablitt, J; Hayman, G; Thompson, A; Isaev, A E*; Enyakov, A M*; Purcell, C*; Houqing, Z*; Yuebing, W*; Yue, Z*; Botha, P*; Krüger, D* (2006) An international key comparison of free-field hydrophone calibrations in the frequency range 1 to 500 kHz. J. Acoust. Soc. Am., 120 (3). pp. 1366-1373.

Roebuck, B (2006) Extrapolating hardness-structure property maps in WC/Co hardmetals. Int. J. Refrac. Hard Mat., 24. pp. 101-108.

Roebuck, B; Lord, J D; Brooks, M; Loveday, M S*; Sellars, C M*; Evans, R W* (2006) Measuring flow stress in hot axisymmetric compression tests. Mater. High Temp., 23 (2). pp. 59-83.

Roebuck, B; Loveday, M S*; Chastel, Y*; Fiorucci, G*; Dal Negro, T* (2006) Measurement of flow stress at high temperature solid torsion tests. Mater. High Temp., 23 (2). pp. 119-144.

S

Sander, T; Nutbrown, R F (2006) The NPL air kerma primary standard TH100C for high dose rate 192Ir brachytherapy sources. NPL Report. DQL-RD 004

Saunders, S R J; McCartney, L N (2006) Current understanding of steam oxidation - power plant and laboratory experience. Mater. Sci. Forum, 522-52. pp. 119-128.

Schöttl, S; Brett, D J L* (2006) Applications of thermal imaging in solid oxide fuel cell research. NPL Report. DEPC-TH 007

Seah, M P (2006) Recent advances to establish XPS as an accurate metrology tool. J. Surf. Anal., 13. pp. 136-141.

Seah, M P; De Chiffre, L* (2006) Surface and interface characterisation. In: Springer handbook of materials measurement methods. Springer, pp. 229-280.

Seah, M P; Gilmore, I S (2006) Quantitative x-ray photoelectron spectroscopy: quadrupole effects, shake-up, Shirley background and relative sensitivity factors. Phys. Rev. B Condens. Matter, 73. 174113

Seah, M P; Spencer, S J (2006) Repeatability intensity calibration of an x-ray photoelectron spectrometer. J. Electron Spectrosc. Relat. Phenom., 151. pp. 178-181.

Seah, M P; Spencer, S J (2006) Repeatability intensity calibration of an x-ray photoelectron spectrometer. J. Electron Spectrosc. Relat. Phenom., 151. pp. 178-181.

Seah, M P; Spencer, S J (2006) Repeatable intensity calibration of an x-ray photoelectron spectrometer. J. Electron Spectrosc. Relat. Phenom., 151 (3). pp. 178-181.

Shaw, A; ter Haar, G* (2006) Requirements for measurement standards in high intensity focused ultrasound (HIFU) fields. NPL Report. DQL-AC 015

Stewart, M; Cain, M G (2006) Measurement and modelling of self-heating in piezoelectric materials and devices. Measurement Good Practice Guide. 84

Sutton, G; Levick, A P; Edwards, G J; Greenhalgh, D* (2006) A combustion temperature and species standard for the calibration of laser diagnostic techniques. Combust. Flame, 147. pp. 39-48.

Sutton, Y C; McBride, K*; Pye, S* (2006) An ultrasound mini-balance for measurement of therapy level ultrasound. Phys. Med. Biol., 51 (14). pp. 3397-3404.

Sweeney, B P; Yardley, R E; Butterfield, D M (2006) CPEA 28: airborne particulate concentrations and numbers in the United Kingdon (phase 2) - annual. NPL Report. DQL-AS 031

Szymaniec, K; Chalupczak, W; Whibberley, P B; Lea, S N; Henderson, D (2006) Reply to the comment on 'Evaluation of the primary frequency standard NPL-CsF1'. Metrologia, 43 (3). L18-19

T

Tantra, R; Brown, R J C; Milton, M J T; Wang, J (2006) Improving the reproducibility of surface enhanced Raman spectroscopy (SERS). VAM Bulletin, 35. pp. 27-30.

Theocharous, E (2006) Absolute linearity measurements on the PbS detector in the infrared. Appl. Opt., 45 (11). pp. 2381-2386.

Theocharous, E (2006) Drift in cryogenically cooled photodetectors: causes and cures. Photonics Spectra (April). 70 - 72

Theocharous, E (2006) On the stability of the spectral responsivity of cryogenically cooled photoconductive HgCdTe infrared detectors. Infrared Phys. Technol., 48. pp. 175-180.

Theocharous, E (2006) The establishment of the NPL infrared relative spectral responsivity scale using cavity pyroelectric detectors. Metrologia, 43 (2). S115-S119

Theocharous, E; Deshpande, R*; Dillon, A C*; Lehman, J* (2006) Evaluation of a pyroelectric detector with a carbon multiwalled nanotube black coating in the infrared. Appl. Opt., 45 (6). pp. 1093-1097.

Theocharous, E; Hartree, W S (2006) The evaluation of the performance of bandpass filters for filter radiometry applications. NPL Report. DQL-OR 017

Thomas, D J; Kolkowski, P; Roberts, N J; Mellow, B D*; Joyce, M J* (2006) Investigation of a possible replacement for cadmium as a thermal neutron absorbing material in neutron instruments. NPL Report. DQL-RN 017

Tomlins, P; Grant, P V; Mikhalovsky, S*; Mikhalovska, L*; James, S*; Vadgama, P* (2006) Characterisation of polymeric tissue scaffolds. Measurement Good Practice Guide. 89

Tomlins, P; Petrie, H*; King, N*; Crocker, L E; Gee, M G; Dean, G D; Rides, M (2006) Predicting and measuring the feel of soft-touch thermoplastic elastomers. Measurement Good Practice Guide. 86

Tomlins, P H; Wang, R K* (2006) Simultaneous analysis of refractive index and physical thickness by Fourier domain optical coherence tomography. IEE Proc., Optoelectron., 153 (5). pp. 222-228.

Ton-That, C*; Shard, A G; Dhanak, V R*; Shinohara, H*; Bendall, J S*; Welland, M E* (2006) Electronic structure of pristine and potassium-doped Y@C82 metallofullerene. Phys. Rev. B, 73. 205406

Turnbull, A; Crocker, L E (2006) Finite element analysis of the stress and strain associated with a corrosion pit in a cylindrical specimen under applied tensile loading. NPL Report. DEPC-MPE 034

Turnbull, A; Pitts, J J; Lord, J D (2006) Residual stress relaxation in shot-peened high strength low alloy steel. NPL Report. DEPC-MPE 024

U

Usadi, E (2006) Reflecting cavity blackbodies for radiometry. Metrologia, 43 (2). S1-5.

V

Verhaegen, F*; Zakikhani, R*; DuSautoy, A R; Palmans, H; Bostock, G; Shipley, D R; Seuntjens, J* (2006) Perturbation correction factors for the eNACP-02 plane-parallel ionization chamber in water in high-energy electron beams. Phys. Med. Biol., 51 (5). pp. 1221-1235.

W

Walton, B R; Hosaka, K; Lea, S N; Margolis, H S; Gill, P (2006) Optical frequency measurements using femtosecond combs. In: Optical Frequency Combs for Space International Workshop, 2-3 October 2006, NPL, UK.

Webster, C H (2006) The future of quantum roulette noise thermometry. NPL Report. DEM-TQD 007

Wickham, M; Zou, L; Dusek, M; Hunt, C P (2006) Measuring the impact of land size and solder joint volume on lead-free solder joint reliability. NPL Report. DEPC-MPR 044

Wickham, M; Zou, L; Hunt, C P (2006) Measuring the effect on isotropic electrically conductive adhesive reliability of joint design characteristics. NPL Report. DEPC-MPR 045

Wickham, M; Zou, L; Hunt, C P (2006) Measuring the reliability of technology demonstrator manufactured with isotropic electrically conductive adhesives. NPL Report. DEPC-MPR 046

Williams, J M; Henderson, D; Patel, P; Behr, R*; Palafox, L* (2006) Achieving sub-100 ns switching of programmable Josephson arrays. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Williams, J M; Henderson, D; Patel, P; Behr, R*; Palafox, L* (2006) Achieving sub-100 ns switching of programmable Josephson arrays. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Willows, A*; Fan, Q*; Ismail, F*; Vaz, C M; Tomlins, P E; Mikhalovska, L*; Mikhalovsky, S*; James, S*; Vadgama, P* (2006) Electrochemical assessment of tissue scaffold degradation. NPL Report. DEPC-MPR 049

Woodman, A P; Pottinger, M*; Ryden, D*; Dean, J C J (2006) The examination and testing of equipment for monitoring airborne radioactive particulate in the workplace. Measurement Good Practice Guide. 82

Woolliams, E R; Fox, N P; Cox, M G; Harris, P M; Harrison, N J (2006) The CCPR K1- a key comparison of spectrual irradiance 250 nm - 2500 nm: measurements, analysis and results. Metrologia, 43 (2). S98-S104

Woolliams, E R; Machin, G; Lowe, D H; Winkler, R (2006) Metal (carbide)-carbon eutectics for thermometry and radiometry: a review of the first seven years. Metrologia, 43. R11-R25

Wright, P S (2006) Accurate spectral analysis of repetitive signals composed of components non-synchronous with the sampling clock. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Wright, P S (2006) Accurate spectral analysis of repetitive signals composed of components non-synchronous with the sampling clock. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Wright, P S (2006) Interharmonics analysis and measurement methods applied to mains frequency compliance testing. IEE Proc. Sci. Meas. Technol., 153 (6). pp. 248-255.

Y

Yardley, R E; Quincey, P; Butterfield, D M; Williams, M; Green, D*; Johnson, P*; Tremper, A* (2006) CPEA 28: airborne particulate concentrations and numbers in the United Kingdon (phase 2). Annual report 2005. NPL Report. DQL-AS 028

Yip, J G M; Collier, R J*; Ridler, N M (2006) New impedance measurement system using dielectric waveguide for the millimetre-wave region. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Yip, J G M; Collier, R J*; Ridler, N M (2006) New impedance measurement system using dielectric waveguide for the millimetre-wave region. In: CPEM 2006 Conference on Precision Electromagnetic Measurements, 9-14 July 2006, Torino, Italy.

Yip, J G M; Ridler, N M; Collier, R J*; Lee, M-H J* (2006) Traceable high-precision impedance measurements for the millimetre-wave band using dielectric waveguide transmission lines. IEE Proc. Sci. Meas. Technol., 153 (6). pp. 235-240.

Z

Zou, L; Hunt, C (2006) Protection performance of conformal coatings in harsh environments. NPL Report. DEPC-MPR 054

This list was generated on Thu Nov 14 10:25:27 2019 GMT.