< back to main site

Publications

Items where Subject is "Advanced Materials > Composites"

Up a level
Export as [feed] RSS
Group by: Authors | Item Type
Number of items at this level: 163.

Report/Guide

UNSPECIFIED (2000) Fatigue performance of polymer matrix composites - Theme group meeting. NPL Report. CMMT(A)265

Aktas, A; Sims, G D; Lira, C*; Stojkovic, M* (2016) Survey of procedures in use for permeability measurements in liquid composite moulding processes. NPL Report. MAT 82

Broughton, W R (2006) In-plane testing of thick composites: a review. NPL Report. DEPC-MPR 057

Broughton, W R (2001) Thick composites. NPL Report. CMMT(A)263

Broughton, W R; Crocker, L E; Gower, M R L (2002) Design requirements for bonded and bolted composite structures. NPL Report. MATC(A)65

Broughton, W R; Crocker, L E; Lodeiro, M J (2006) Characterising micro and nanoscale interfaces in advanced composites: a review. NPL Report. DEPC-MPR 055

Broughton, W R; Gower, M R L; Lodeiro, M J; Shaw, R M (2012) Good practice guide for monitoring deformation and damage in fibre-reinforced plastics. Measurement Good Practice Guide. 123

Broughton, W R; Gower, M R L; Lodeiro, M J; Shaw, R M (2010) Good practice guide for the generation and assessment of fatigue data for fibre-reinforced plastics. Measurement Good Practice Guide. 115

Broughton, W R; Gower, M R L; Lodeiro, M J; Shaw, R M (2001) Through-thickness testing of polymer matrix composites. NPL Report. MATC(MN)06

Broughton, W R; Lodeiro, M J (2000) Cyclic fatigue of continuous unidirectional polymer matrix composites. NPL Report. CMMT(A)249

Broughton, W R; Lodeiro, M J (1999) Cyclic fatigue of continuous unidirectional polymer matrix composites: an interim report. NPL Report. CMMT(A)186

Broughton, W R; Lodeiro, M J (2000) Environmental and fatigue testing of fibre-reinforced polymer composites. NPL Report. CMMT(MN)67

Broughton, W R; Lodeiro, M J (2000) Environmental and fatigur testing of fibre bundles and impregnated strands. NPL Report. CMMT(MN)63

Broughton, W R; Lodeiro, M J (2000) Fatigue testing of composite laminates. NPL Report. CMMT(A)252

Broughton, W R; Lodeiro, M J (2000) Techniques for monitoring water absorption in fibre-reinforced polymer composites. NPL Report. CMMT(MN)064

Broughton, W R; Lodeiro, M J; Maudgal, S (2000) Accelerated test methods for assessing environmental degradation of composite laminates. NPL Report. CMMT(A)251

Broughton, W R; Lodeiro, M J; Maudgal, S (1999) Environmental degradation of unidirectional polmer matrix composites: an interim report. NPL Report. CMMT(A)187

Broughton, W R; Lodeiro, M J; Mulligan, D R (2000) Environmental degradation of undirectional composites. NPL Report. CMMT(A)250

Broughton, W R; Maxwell, A S; Sims, G D (2021) Accelerated testing and associated predictive modeling for characterising durability of composites: a critical review. NPL Report. MAT 99

Broughton, W R; Mera, R D; Hinopoulos, G (1999) Environmental degradation of adhesive joints: single-lap joint geometry. NPL Report. CMMT(A)196

Broughton, W R; Sims, G D (1994) An overview of through-thickness test methods for polymer matrix composites. NPL Report. DMM(A)148

Davies, A*; Foreman, A*; Shaw, R M; Sims, G D (2001) Fibre reinforced plastic composites - machining of composites and specimen preparation. Measurement Good Practice Guide. 38

Dean, G D; Mera, R D (2004) Determination of material properties and parameters required for the simulation of impact performance of plastics using finite element analysis. NPL Report. DEPC-MPR 007

Gower, M R L (2009) Project ACLAIM (Advanced Composite Life Assessment and Integrity Management): measurement of Mode I and II fracture toughness for mixed material systems used in ACLAIM case studies. NPL Report. MAT 19

Gower, M R L; Shaw, R M (2011) Development of test methods for measuring thick section tensile and compression properties of polymer matrix composites. NPL Report. MN 6

Gower, M R L; Shaw, R M (2009) Towards a planar cruciform specimen for biaxial characterisation of polymer matrix composites (PMCs). NPL Report. MN 9

Gower, M R L; Shaw, R M; Broughton, W R (2008) Thick Composites: Part I:Mechanical Test Review, Part II: Cure Optimisation. NPL Report. MAT 24

Gower, M R L; Sims, G D (2005) Characterisation of defects in composites materials systems. NPL Report. MATC(A)158

Gower, M R L; Sims, G D (1999) Determining the skin-to-core bond strength of sandwich constructions. NPL Report. CMMT(MN)044

Gower, M R L; Sims, G D (2003) Fibre-reinforced plastic composites - qualification of composite materials. Measurement Good Practice Guide. 64

Gower, M R L; Sims, G D (2003) Material data requirements and recommended test methods for the predictive modelling of defect criticality in composite material systems. NPL Report. MATC(A)147

Gower, M R L; Sims, G D (2003) Towards a Standard Qualification Plan (SQP) for composite materials - current status of material property databases. NPL Report. MATC(A)115

Gower, M R L; Sims, G D (2002) Towards a Standard Qualification plan (SQP) for composite materials - initial draft. NPL Report. MATC(A)84

Lesniarek-Hamid, J L; Sims, G D (1993) Standardisation requirements for ultrasonic c-scanning of polymer matrix composites - an initial assessment. NPL Report. DMM(A)105

Lodeiro, M J; Maudgal, S; McCartney, L N; Morrell, R; Roebuck, B (1998) Critical review of interface testing methods for composites. NPL Report. CMMT(A)101

Lodeiro, M J; Young, T; Gower, M R L (2013) Feasibility of moisture and humidity determination using optical fibre sensing in polymer matrix composites. NPL Report. MN 11

Lord, J D (2004) Measuring the Poissin's ratio of fibre reinforced metal composites. NPL Report. DEPC-MN 008

Lord, J D (1997) Measuring the dimensional stability of composites. NPL Report. CMMT(MN)014

Lord, J D; Mummery, P M (1998) Review of elevated temperature fatigue life test methods for metal matrix composites. Project CPD2 - report 3- life assessment and prediction. NPL Report. CMMT(A)108

Maxwell, A S; Broughton, W R; Lodeiro, M J; Shaw, R (2009) Measurement of residual stresses and strains in carbon fibre composites. NPL Report. MN 7

McCartney, L N (1997) Design guide for predicting composite properties. part i: description of methodology. NPL Report. CMMT(A)79

McCartney, L N (2004) Effect of mixed mode loading on ply crack development in laminated composites: theory and application. NPL Report. MATC(A)167

McCartney, L N (1998) Model of composite degradation due to environmental damge. NPL Report. CMMT(A)124

McCartney, L N (2001) Model of composite degradation due to environmentally assisted fatigue damage. NPL Report. MATC(A)26

McCartney, L N (1999) Model of composite degradation due to fatigue damage. NPL Report. CMMT(A)211

McCartney, L N (2001) Simulation of progressive damage formation and failure during the loading of cross-ply composites. NPL Report. MATC(A)20

McCartney, L N (1999) Simulation of progressive fibre failure during the tensile loading of unidirectional composites. NPL Report. CMMT(A)212

McCartney, L N (1993) Stress transfer mechanics for multiple perfectly bonded concentric cylinder models of unidirectional composites. NPL Report. DMM(A)129

McCartney, L N (1996) Stress transfer mechanics for ply cracks in general symmetric laminates. NPL Report. CMMT(A)50

McCartney, L N; Pierse, C (1997) Stress transfer mechanics for multiple ply laminates subject to bending. NPL Report. CMMT(A)55

McCormick, N J; Gower, M R L; McCartney, L N (2002) An Internet accessible system for simulating damage in composite laminates during bending deformation. NPL Report. MATC(A)96

Mendels, D A; Shaw, R M (2002) Determination of mode I energy release rate in composite laminates by the wedge test. NPL Report. MATC(MN)36

Mendels, D A; Shaw, R M (2002) Determination of mode II energy release rate in composite laminates by the modified double-lap shear test. NPL Report. MATC(A)125

Mera, R D; Sims, G D (2001) Opportunities for composites in the energy industry. NPL Report. MATC(A)64

Mulligan, D R; Gnaniah, S J P; Sims, G D (2003) Thermal analysis techniques for composites and adhesives (second edition). Measurement Good Practice Guide. 62

Mulligan, D R; Gnaniah, S J P; Sims, G D (2000) Thermal analysis techniques for composites and adhesives. Measurement Good Practice Guide. 32

Mulligan, D R; Sims, G D (1999) Characterisation of fibre surfaces by wetting techniques. NPL Report. CMMT(MN)055

Mulligan, D R; Sims, G D (2000) Test methods for chemical and physical characterisation of the fibre-matrix interface in composite materials. NPL Report. CMMT(MN)65

Niklewicz, J; Sims, G D (2002) Size effects in composite materials. NPL Report. MATC(A)74

Pemberton, R; Edser, D; Gower, M (2020) Optimisation of Acid Digestion Conditions for Volume Fraction Measurements of Hard to Digest Fibre-Reinforced Polymer Composites. NPL Report. MN 12

Pemberton, R; Giannis, S (2021) Unravelling the hydrogen regulatory framework: approval process for type IV onboard vehicle hydrogen fuel containers. NPL Report. ENG 70

Poole, M; Gower, M (2021) Mechanical Characterisation of 3D Fibre-Reinforced Plastic (FRP) Composites. Measurement Good Practice Guide. 151

Roebuck, B (2001) Miniature testpiece for the assessment of the dimensional stability of monolithic and metal composite aluminium alloys. NPL Report. CMMT(MN)069

Roebuck, B; Lord, J D (1993) Particulate metal matrix composites - draft procedure for tensile tests at ambient temperature. NPL Report. DMM(A)100

Roebuck, B; Lord, J D (1996) Standardisation of high temperature tensile tests for discontinuously reinforced metal matrix composites. NPL Report. CMMT(MN)002

Salmeron Perez, N; Shaw, R M; Gower, M R L (2022) Mechanical testing of fibre-reinforced polymer matrix composites at cryogenic temperatures Requirements for mechanical test capability at -269°C (4 K). NPL Report. MAT 102

Shaw, R M; Sims, G D (2004) Through-thickness tensile testing of polymer matrix composites. NPL Report. DEPC-MN 007

Shaw, R M; Sims, G D (2005) Understanding compression testing of thick polymer matrix composites. NPL Report. DEPC-MN 019

Sims, G D (2002) Annual review of composites standardisation activities, April 2001-March 2002. NPL Report. MATC(A)110

Sims, G D (1997) Composite test methods standardisation: trends and issues. NPL Report. CMMT(A)85

Sims, G D (2003) Review of composites standardisation activities, April 2002 - March 2003. NPL Report. MATC(A)151

Sims, G D (2002) Traceability and qualification in design with composite materials. NPL Report. MATC(A)81

Sims, G D; Gnaniah, S J P (2005) Polymer composites - rate dependent temperature calibration of dynamic mechanical analysers (DMA) for Tg measurements. NPL Report. DEPC-MN 017

Sims, G D; Nimmo, W; Johnson, A F; Ferriss, D H (1994) Analysis of plate-twist test plane shear modulus of composite materials. NPL Report. DMM(A)54

Sims, G D; Saveedra, M (2010) An introduction to the properties of carbon nano-particle enhanced polymers. NPL Report. MN 10

Spetsieris, N; Edser, D (2022) Framework for dynamic uncertainty budget evolution for mode I fracture toughness measurements of fibre-reinforced plastic (FRP) composites: a user's guide to uncertainty budget calculations. NPL Report. MAT 104

Article

Aktas, A; Boyd, S W*; Shenoi, R A* (2015) Cure and strain monitoring of novel unsaturated polyester/phenolic resin blends in the vacuum infusion process using fibre Bragg gratings. J. Compos. Mater., 49 (29). pp. 3599-3608.

Aktas, A; Krishnan, L*; Kandola, B*; Boyd, S W*; Shenoi, R A* (2015) A cure modelling study of an unsaturated polyester resin system for the simulation of curing of fibre-reinforced composites during the vacuum infusion process. J. Compos. Mater., 49 (20). pp. 2529-2540.

Blazquez, A*; Mantic, V*; Paris, F*; McCartney, L N (2008) Stress state characterization of delamination cracks in [0/90] symmetric laminates by BEM. Int. J. Solids Struct., 45 (6). pp. 1632-1662.

Bowen, C R*; Dent, A C*; Nelson, L J*; Stevens, R*; Cain, M G; Stewart, M (2006) Failure and volume fraction dependent mechanical properties of composites sensors and actuators. Proc. Inst. Mech. Eng. C, J. Mech. Eng. Sci., 220 (11). pp. 1655-1664.

Broughton, W R; Gower, M R L; Lodeiro, M J; Pilkington, G D; Shaw, R M (2010) Assessment of quasi-static and fatigue loaded notched GRP laminates using digital image correlation. Appl. Mechan. Mater., 24-25. pp. 407-412.

Broughton, W R; Gower, M R L; Lodeiro, M J; Pilkington, G D; Shaw, R M (2011) An experimental assessment of open-hole tension-tension fatigue behaviour of a GFRP laminate. Compos. A, Appl. Sci. Manuf., 42 (10). pp. 1310-1320.

Broughton, W R; Koukoulas, T (2011) Seeing is believing - optical techniques for measuring nanoparticle content and dispersion in polymeric matrices. Mater. World, 19 (5). pp. 20-21.

Broughton, W R; Koukoulas, T; Woolliams, P D; Williams, J*; Rahatekar, S S* (2013) Assessment of nanoparticle loading and dispersion in polymeric materials using optical coherence tomography. Polym. Test., 32 (7). pp. 1290-1298.

Broughton, W R; Lodeiro, M J; Pilkington, G D (2010) Influence of coupling agents on material behaviour of glass flake reinforced polypropylene. Compos. A, Appl. Sci. Manuf., 41 (4). pp. 506-514.

Crocker, L E; Duncan, B C; Broughton, W R (2016) Assessment of test methods for a cryogenic liquid containment system. Int. J. Adhes. Adhes., 70. pp. 126-136.

Dent, A C E*; Bowen, C R*; Stevens, R*; Cain, M G; Stewart, M (2008) Tensile strength of active fibre composites - prediction and measurement. Ferroelectronics, 368 (1). pp. 209-215.

Domun, N; Kaboglu, C; Paton, K R; Dear, J P; Liu, J; Blackman, B R K; Liaghat, G; Hadavinia, H (2019) Ballistic impact behaviour of glass fibre reinforced polymer composite with 1D/2D nanomodified epoxy matrices. Composites Part B: Engineering, 167. pp. 497-506. ISSN 13598368

Domun, N; Paton, K R; Blackman, B R K; Kaboglu, C; Vahid, S; Zhang, T; Dear, J P; Kinloch, A J; Hadavinia, H (2020) On the extent of fracture toughness transfer from 1D/2D nanomodified epoxy matrices to glass fibre composites. Journal of Materials Science, 55 (11). pp. 4717-4733. ISSN 0022-2461

Domun, N; Paton, K R; Hadavinia, H; Sainsbury, T; Zhang, T; Mohamud, H (2017) Enhancement of fracture toughness of epoxy nanocomposites by combing nanotubes and nanosheets as filters. Materials, 10 (10). 1179

Domun, N*; Hadavinia, H*; Zhang, T*; Sainsbury, T; Liaghat, G H*; Vahid, S* (2015) Improving the fracture toughness and the strength of epoxy using nanomaterials - a review of the current status. Nanoscale, 7 (23). pp. 10294-10329.

Giannis, S; Adams, R D (2019) Failure of elastomeric sealants under tension and shear: Experiments and analysis. International Journal of Adhesion and Adhesives, 91. pp. 77-91. ISSN 01437496

Gower, M R L; Shaw, R M; Wright, L; Urquhart, J; Hughes, J; Gnaniah, S; Morrell, R; Garstka, T* (2016) Determination of ply level residual stresses in a laminated carbon fibre-reinforced epoxy composite using constant, linear and quadratic variations of the incremental slitting method. Compos. A, Appl. Sci. Manuf., 90. pp. 441-450.

Griffiths, A J; Turnbull, A (1994) An investigation of the electrochemical polarisation behaviour of 6061 A1 metal matrix composites. Corros. Sci., 36 (1). 23 - 35

Hajikazemi, M; McCarthy, L N; Paepegem, W; Sadr, M H (2018) Theory of Variational Stress Transfer in General Symmetric Composite Laminates Containing Non-Uniformly Spaced Ply Cracks. Composites Part A - Applied Science and Manufacturing, 107. pp. 374-386.

Hajikazemi, M; McCarthy, LN (2018) Comparison of Variational and Generalized Plane Strain approaches for matrix cracking in general symmetric laminates. International Journal of Damage Mechanics, 27 (4). pp. 507-540.

Hajikazemi, M.; McCartney, L. N.; Van Paepegem, W. (2020) Matrix cracking initiation, propagation and laminate failure in multiple plies of general symmetric composite laminates. Composites Part A: Applied Science and Manufacturing, 136. 105963 ISSN 1359835X

Harrer, W*; Morrell, R; Danzer, R* (2014) Fractography of biaxial tested Si3N4-specimens. J. Eur. Ceram. Soc., 34 (14). pp. 3283-3289.

Huang, E W*; Qiao, J W*; Winiarski, B; Lee, W J*; Scheel, M*; Chuang, C P*; Liaw, P K*; Lo, Y C*; Zhang, Y*; Di Michiel, M* (2014) Microyielding of core-shell crystal dendrites in a bulk-metallic-glass matrix composite. Scientific Reports, 4. p. 4394.

Jiang, L D*; Spearing, S M*; Monclus, M A; Jennett, N M (2011) Formation and mechanical characterisation of SU8 composite film reinforced with horizontally aligned and high volume fraction CNTs. Comp. Sci. Technol., 71 (10). pp. 1301-1308.

Katerelos, D G*; McCartney, L N; Galiotis, C* (2005) Local strain re-distribution and stiffness degradation cross-ply polymer composites under tension. Acta. Mater., 53. pp. 3335-3343.

Katerelos, D G*; McCartney, L N; Galiotis, C* (2005) Local strain re-distribution and stiffness degradation in cross-ply polymer composites under tension. Acta. Mater., 53. pp. 3335-3343.

Koukoulas, T; Broughton, W R; Tedaldi, M; Theobald, P D (2011) Novel non-contact optical characterisation methods of polymeric nanocomposite structures based on their particle loading and dispersion profile. Proc. SPIE - Int. Soc. Opt. Eng., 8082. 808220

Koukoulas, T; Broughton, W R; Theobald, P D; Tedaldi, M (2010) Characterization of solid complex multiphase systems based on oscillatory photon correlation spectroscopy. Opt. Lett., 35 (22). pp. 3754-3756.

Koukoulas, T; Broughton, W R; Williams, J*; Rahatekar, S* (2012) Optical characterisation of polymeric nanocomposites using tomographic, spectroscopic and Fraunhofer wavefront assessment. Proc. SPIE - Int. Soc. Opt. Eng., 8550. 855039

Lord, J D; Morrell, R (2014) Comparison of static and dynamic methods for measuring stiffness of high modulus steels and metal composites. Can. Metall. Q., 53 (3). pp. 292-299.

Maierhofer, C; Krankenhagen, R; Röllig, M; Rehmer, B; Gower, M; Baker, G; Lodeiro, M; Aktas, A; Monte, C; Adibekyan, A; Gutschwager, B (2018) Defect characterisation of tensile loaded CFRP and GFRP laminates used in energy applications by means of infrared thermography. Quantitative InfraRed Thermography Journal, 15 (1). pp. 17-36. ISSN 1768-6733

Maierhofer, C; Krankenhagen, R; Röllig, M; Unnikrishnakurup, S; Monte, C; Adibekyan, A; Gutschwager, B; Knazowicka, L; Blahut, A; Gower, M; Lodeiro, M; Baker, G; Aktas, A (2018) Influence of thermal and optical material properties on the characterization of defects in fiber reinforced composites with active thermography methods. tm - Technisches Messen, 85 (1). pp. 13-27. ISSN 0171-8096

Maierhofer, C; Röllig, M; Gower, M; Lodeiro, M; Baker, G; Monte, C; Adibekyan, A; Gutschwager, B; Knazowicka, L; Blahut, A (2018) Evaluation of Different Techniques of Active Thermography for Quantification of Artificial Defects in Fiber-Reinforced Composites Using Thermal and Phase Contrast Data Analysis. International Journal of Thermophysics, 39 (5). 61 ISSN 0195-928X

May, D.; Aktas, A.; Advani, S.G.; Berg, D.C.; Endruweit, A.; Fauster, E.; Lomov, S.V.; Long, A.; Mitschang, P.; Abaimov, S.; Abliz, D.; Akhatov, I.; Ali, M.A.; Allen, T.D.; Bickerton, S.; Bodaghi, M.; Caglar, B.; Caglar, H.; Chiminelli, A.; Correia, N.; Cosson, B.; Danzi, M.; Dittmann, J.; Ermanni, P.; Francucci, G.; George, A.; Grishaev, V.; Hancioglu, M.; Kabachi, M.A.; Kind, K.; Deléglise-Lagardère, M.; Laspalas, M.; Lebedev, O.V.; Lizaranzu, M.; Liotier, P.-J.; Middendorf, P.; Morán, J.; Park, C.-H.; Pipes, R.B.; Pucci, M.F.; Raynal, J.; Rodriguez, E.S.; Schledjewski, R.; Schubnel, R.; Sharp, N.; Sims, G.; Sozer, E.M.; Sousa, P.; Thomas, J.; Umer, R.; Wijaya, W.; Willenbacher, B.; Yong, A.; Zaremba, S.; Ziegmann, G. (2019) In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise. Composites Part A: Applied Science and Manufacturing, 121. pp. 100-114. ISSN 1359835X

McCartney, L N (1993) Analytical micromechanical models for the prediction of multiple cracking in composites. J. Phys. IV Colloq., 3 (C7). pp. 1637-1646.

McCartney, L N (2013) Analytical model for sliding interfaces associated with fibre fractures or matrix cracks. Comp. Mater. Continua, 35 (3). pp. 183-227.

McCartney, L N (2013) Analytical models for sliding interfaces associated with fibre fractures or matrix cracks. CMC - Comput. Mater. Cont., 35 (3). pp. 183-227.

McCartney, L N (2013) Derivations of energy-based modelling for ply cracking in general symmetric laminates. J. Compos. Mater., 47 (20-21). pp. 2641-2673.

McCartney, L N (2008) Energy methods for fatigue damage modelling of laminates. Comp. Sci. Technol., 68 (13). pp. 2601-2615.

McCartney, L N (2013) Energy methods for modelling damage in laminates. J. Compos. Mater., 47 (20-21). pp. 2613-2640.

McCartney, L N (2010) Maxwell's far-field methodology predicting elastic properties of multi-phase composites reinforced with aligned transverse isotropic spheroids. Philos. Mag., 90 (31-32). pp. 4175-4207.

McCartney, L N (1992) Mechanics for the growth of bridge cracks in composite materials II. Applications. J. Compos. Technol. Res., 14 (3). pp. 147-154.

McCartney, L N (1992) Mechanics for the growth of bridged cracks in composite materials I. Basic principles. J. Compos. Technol. Res., 14 (3). pp. 133-146.

McCartney, L N (2003) Physically based damage models for laminated composites. I Mech. E. J. of Materials: Design & Applications, 217. pp. 163-199.

McCartney, L N (1993) The prediction of cracking in biaxially loaded cross-ply laminates having brittle matrices. Composites, 24 (2). pp. 84-92.

McCartney, L N; Blazquez, A*; Paris, F* (2012) Energy-based delamination theory for biaxial loading in the presence of thermal stresses. Comp. Sci. Technol., 72 (14). pp. 1753-1766.

McCartney, L N; Kelly, A* (2007) Effective thermal and elastic properties of [+theta /-theta ]s laminates. Comp. Sci. Technol., 67. pp. 646-661.

McCartney, L N; Kelly, A* (2008) Maxwell's far-field methodology applied to the prediction of properties of multi-phase isotropic particulate composites. Proc. R. Soc. Lond. A, 464 (2090). pp. 423-446.

Morrell, R; McCartney, L N (1993) Measurement of properties of brittle matrix composites. Br. Ceram. Trans. J., 92 (1). pp. 1-7.

Munz, M (2008) On the nature of the multi-zone interphase of a thermoset/thermoplastic composite - an analysis employing dynamic-mechanical thermal analysis and nanoindentation. J. Adhes., 84 (5). pp. 445-482.

Nelson, L J*; Bowen, C R*; Stevens, R*; Cain, M G; Stewart, M (2003) High field behaviour of piezoelectric fibre composites. Proc. SPIE - Int. Soc. Opt. Eng., 5053. pp. 544-555.

Palaniappan, J*; Wang, H*; Ogin, S L*; Thorne, A*; Reed, G T*; Tjin, S C*; McCartney, L N (2006) Prediction of the reflected spectra from chirped fibre Bragg gratings embedded within cracked crossply laminates. Meas. Sci. Technol., 17. pp. 1609-1614.

Parsons, S; Murphy, R J*; Lee, J*; Sims, G D (2015) Uncertainty communication in the environmental life cycle assessment of carbon nanotubes. Int. J. Nanotechnol., 12 (8-9). pp. 620-630.

Pemberton, R; Crocker, L; Poole, M; Shaw, R; Gower, M (2021) Comparison of Specimen Geometries for Measuring Through-Thickness Tensile Mechanical Properties of Fibre-Reinforced Polymer Composites. Journal of Composites Science, 5 (3). 84 ISSN 2504-477X

Robinson, D W*; Wright, J*; Gupta, S*; Mottram, T*; Armitage, P*; Gower, M R L; Lodeiro, M J; Gelat, P N; Schwarz, C* (2016) A novel non-linear elastic wave acoustic spectroscopy (NEWS) non-destructive inspection (NDI) method for aeronautic and spacecraft materials and components. CEAS Space J., 8 (1). pp. 35-45.

Roebuck, B; Gee, M G; Lord, J D; McCartney, L N (1998) Miniature thermal cycling tests on aluminium alloy metal matrix composites. Mater. Sci. Technol., 14 (Sept -). pp. 1001-1008.

Saavedra, M S; Sims, G D; McCartney, L N; Stolojan, V*; Anguita, J V*; Tan, Y Y*; Ogin, S L*; Smith, P A*; Silva, S R P* (2012) Catalysing the production of multiple arm carbon octopi nanostructures. Carbon, 50 (6). pp. 2141-2146.

Sanderson, A R*; Ogin, S L*; Crocombe, A D*; Gower, M R L; Lee, R J* (2012) Use of surface-mounted chirped fibre Bragg grating sensor to monitor delamination growth in a double-cantilever beam test. Comp. Sci. Technol., 72 (10). pp. 1121-1126.

Seah, M P; Hunt, C P; Sykes, D*; Valeri, S*; Muller, R*; Lamb, B* (1993) Interlaboratory tests of a composite reference sample to calibrate Auger electron spectrometers in the differential mode. J. Electron Spectrosc. Relat. Phenom., 61 (2). pp. 173-182.

Sim, G D; Bennett, S (2007) VAMAS promotes metrology of material property measurement at CIPM. MAPAN, J. Metrol. Soc. India, 22 (3). pp. 209-220.

Sims, G D (2002) Polymer Composites. VAMAS Bulletin, 25. pp. 29-31.

Sims, G D (2001) Polymer composites. VAMAS Bulletin, 24. pp. 31-32.

Sims, G D (1998) Standards will cut composites industry costs. Reinforced Plastics, 42 (8). 54-55, 57-58

Utracki, L A; Broughton, W R; Gonzalez-Rojano, N*; de Carvalho, L H*; Achete, C A* (2011) Clays for polymeric nanocomposites. Polym. Eng. Sci., 51 (3). pp. 559-572.

Williams, J*; Broughton, W R; Koukoulas, T; Rahatekar, S S* (2013) Plasma treatment as a method for functionalising and improving dispersion of carbon nanotubes in epoxy resins. J. Mater. Sci., 48 (3). pp. 1005-1013.

Yong, A X H; Aktas, A; May, D; Endruweit, A; Advani, S; Hubert, P; Abaimov, S G; Abliz, D; Akhatov, I; Ali, M A; Allen, T; Berg, D C; Bickerton, S; Brauner, C; Brutsch, D; Caglar, B; Caglar, H; Causse, P; Chiminelli, A; Cohades, A; Comas-Cardona, S; Danzi, M; Dittmann, J; Dransfeld, C; Ermanni, P; Fauster, E; Garcia-Manrique, J A; George, A; Graupner, R; Grishaev, V; Guilloux, A; Hancioglu, M; Harizi, W; Herman, T; Huang, W; Kabachi, M A; Keller, A; Kind, K; Laspalas, M; Lebedev, O V; Lizaranzu, M; Long, A C; Masania, K; Michaud, V; Middendorf, P; Salvatori, D; Schubnel, R; Sharp, N; Sozer, M; Thomas, J; Trochu, F; Umer, R; Valette, J; Wang, J H; Willenbacher, B (2021) Out-of-plane permeability measurement for reinforcement textiles: a benchmark exercise. Composites Part A: Applied Science and Manufacturing, 148. 106480

Yong, A.X.H.; Aktas, A.; May, D.; Endruweit, A.; Lomov, S.V.; Advani, S.; Hubert, P.; Abaimov, S.G.; Abliz, D.; Akhatov, I.; Ali, M.A.; Allaoui, S.; Allen, T.; Berg, D.C.; Bickerton, S.; Caglar, B.; Causse, P.; Chiminelli, A.; Comas-Cardona, S.; Danzi, M.; Dittmann, J.; Dransfeld, C.; Ermanni, P.; Fauster, E.; George, A.; Gillibert, J.; Govignon, Q.; Graupner, R.; Grishaev, V.; Guilloux, A.; Kabachi, M.A.; Keller, A.; Kind, K.; Large, D.; Laspalas, M.; Lebedev, O.V.; Lizaranzu, M.; Long, A.C.; López, C.; Masania, K.; Michaud, V.; Middendorf, P.; Mitschang, P.; van Oosterom, S.; Schubnel, R.; Sharp, N.; Sousa, P.; Trochu, F.; Umer, R.; Valette, J.; Wang, J.H. (2021) Experimental characterisation of textile compaction response: A benchmark exercise. Composites Part A: Applied Science and Manufacturing, 142. 106243 ISSN 1359835X

Young, T J; Crocker, L E; Broughton, W R; Ogin, S L*; Smith, P A* (2013) Observations on interphase characterisation in polymer composites by nano-scale indentation using AFM and FEA. Compos. A, Appl. Sci. Manuf., 50. pp. 39-43.

Young, T J; Lodeiro, M J; Gower, M R L; Sassi, M B (2013) Systematic approach for the calibration of humidity sensitive polyimide recoated fibre Bragg gratings for measuring humidity and temperature and the application for measuring moisture absorption in polymers. Meas. Sci. Technol., 24 (8). 085101

Young, T J; Monclus, M A; Broughton, W R; Ogin, S L*; Smith, P A* (2012) Observations on interphase characterisation in polymer composites by nanoscale indentation and use of AFM cantilever torsion to identify measurement artefacts. Plast. Rubber Compos., 41 (6). pp. 240-246.

Young, T J; Monclus, M A; Burnett, T L; Broughton, W R; Ogin, S L*; Smith, P A* (2011) The use of the PeakForce quantitative nanomechanical mapping AFM-based method for high-resolution Young's modulus measurement of polymers. Meas. Sci. Technol., 22 (12). 125703

Conference or Workshop Item

Bowen, C R*; Dent, A C*; Stevens, R*; Cain, M G; Stewart, M (2005) Determination of critical and minimum volume fraction for composite sensors and actuators. In: 4M 2005 - First International Conference on Multi-Material Micro Manufacture, 2005, Cardiff, UK.

Broughton, W R; Lodeiro, M; Sims, G D (1996) Experimental validation of shear test methods for through-thickness properties. In: ECCM-7 7th European Conference on Composite Materials, 14-16 May 1996, London, UK.

Broughton, W R; Nimmo, W; Sims, G D (1995) Flexural failure of composite beam structures. In: Proc. 3rd Int. Conf. Deformation and fracture of composites, March 1995, University of Surrey.

Maierhofer, C*; Krankenhagen, R*; Rollig, M*; Rehmer, B*; Gower, M; Baker, G; Lodeiro, M; Aktas, A; Knazovicka, L*; Blahut, A*; Monte, C*; Adibekyan, A*; Gutschwager, B* (2016) Characterisation of artificial defects in CFRP and GFRP sheets designed for energy applications using active thermography. In: 13th Quantitative Infrared Thermography Conference, 4-8 July 2016, Gdansk, Poland.

McCartney, L N (1995) Interaction of transverse cracks of finite size in a cross-ply laminate. In: Proc. 10th International conference on Composite Materials, 14-18 August 1995, Whistler, B.C., Canada.

McCartney, L N (1997) Should composite micro-mechanics be used in design? In: Proc. 4th International Conference on Composite Engineering, July 1997, Hawaii, USA.

McCartney, L N (1996) Stress transfer mechanics for angle-ply laminates. In: ECCM-7 7th European Conference on Composite Materials, 14 - 16 May 1996, London, UK.

McCartney, L N; Hannaby, S A; Cooper, P M (1995) Effects of cracking in multi-ply cross-ply laminates. In: Proc. 3rd Int. Conf. Deformation and fracture of composites, March 1995, University of Surrey.

McCartney, L N; Pierse, C (1997) Stress transfer mechanics for multiple ply laminates for axial loading and bending. In: Proc. 11th International Conference on Composite Materials, July 1997, Gold Coast, Australia.

Roebuck, B; Lord, J D; Orkney, L P (1994) Compression testing of metal matrix composites. In: ECCM CTS 2 (Testing and Standardisation) European Conference, 13-15 September 1994, Hamburg, Germany.

Sims, G D (1994) International standardisation of coupon and structural element test methods. In: ECCM CTS - 2nd European Conference on Composites Testing and Standardisation, September 1994, Hamburg, Germany.

Sims, G D; Payne, D R; Ferriss, D H (1996) Analysis and experimental validation of structural element test methods. In: ECCM-7 7th European Conference on Composite Materials, 14-16 May 1996, London, UK.

Book Chapter/Section

Broughton, W R; Sims, G D (2009) Testing and evaluation of polymer composites. In: ICE Manual of Construction Materials. UNSPECIFIED, pp. 633-640. ISBN 9780727735973

McCartney, L N (1995) Prediction of microcracking in composite materials. In: Cherepanov, G P, ed., Fracture: a topical encyclopaedia of current knowledge dedicated to Alan Arnold Griffith. Melbourne. USA: Krieger Publishing Co., pp. 905-916.

Sims, G D (1995) European standardisation for composites: test methods, materials, vessels, tanks and pipework. In: FRC II -Tanks and vessels. I Mech Eng..

Sims, G D; Broughton, W R (2000) Glass fiber reinforced plastics - properties. In: Comprehensive Composite Materials. Elsevier, pp. 151-197.

This list was generated on Tue Jun 28 23:49:44 2022 BST.