B

Banks, J P; Gohil, D D; Evans, H E*; Hall, D J; Saunders, S R J (1994) The room-temperature mechanical properties of alumina scales. In: Coutsouradis, D, et al, eds. Materials for advanced power engineering: part 2. Klewer Academic Publishers, pp. 1543-1552.

Bermejo, R*; Supancic, P*; Krautgasser, C*; Morrell, R; Danzer, R* (2013) Subcritical crack growth on low temperature co-fired ceramics under biaxial loading. Eng. Fract. Mech., 100. pp. 108-121.

Broughton, W R; Gower, M R L; Lodeiro, M J; Shaw, R M (2001) Through-thickness testing of polymer matrix composites. NPL Report. MATC(MN)06

Broughton, W R; Hinopoulos, G (1999) Evaluation of the single-lap joint using finite element analysis. NPL Report. CMMT(A)206

Broughton, W R; Nimmo, W; Sims, G D (1994) Plate twist and V-notched beam - complementary test methods for shear properties. In: ECCM-CTS - 2nd European Conference on Composite Testing and Standardisation, September 1994, Hamburg, Germany.

Broughton, W R; Nunn, J (2006) Non-invasive methods for monitoring microstructural condition of materials. NPL Report. DEPC-MPE 032

C

Crocker, L (2019) Literature review on tensile test standards for metal additive manufacturing. NPL Report. MAT 89

Crocker, L E; Dean, G D (2001) Tensile testing of adhesive butt-joint specimens. NPL Report. MATC(MN)09

D

Dean, G (1996) Proposals for a revision of ISO 11403-1: comparable multipoint data: Part 1 Mechanical properties. In: Proc. Euradh '96, September 1996, Cambridge.

Dean, G (1999) The guide to the preparation and testing of bulk specimens. Measurement Good Practice Guide. 17

Dean, G; Loveday, M S; Cooper, P M; Read, B E; Roebuck, B (1994) Aspects of modulus measurements. In: Materials metrology and standards for structural performance (Dyson, B F, Loveday, M S, Gee, M G, eds.). London, Chapman & Hall, pp. 150-209.

Dean, G; Wright, L (2002) Analysis of failure tests on uniaxial tensile and plate specimens of ABS. NPL Report. MATC(A)88

Duncan, B C (1998) Methods for measuring strains at high rates. NPL Report. CMMT(A)133

Duncan, B C; Dean, G; Tomlins, P E (1996) Tensile testing of bulk and thin film adhesives. In: EURADH '96 - 3rd European Adhesion Conference, September 1996, Cambridge, UK.

de Luca, F; Zhang, H; Mingard, K P; Gee, M (2023) Nanomechanical Response of Tungsten Carbide Single Crystals in Extreme Conditions: Temperature and Strain Rate Dependence. Materialia, 27. 101706

F

Ferriss, D H; Miller, G F (1993) Approximate estimation of the effects of asymmetry on the testing of tensile specimens. NPL Report. DMM(A)117

Fitzpatrick, M E*; Fry, A T; Holdway, P*; Kandil, F A; Shackleton, J*; Suominen, L (2005) Determination of residual stresses by X-ray diffraction. Measurement Good Practice Guide. 52

Fry, A T (2002) Evaluation of the repeatability of residual stress measurements using x-ray diffraction. NPL Report. MATC(MN)19

Fry, A T (2022) Report of Stakeholder Consultations on Measurement Needs for Additive Manufacturing - Workshop 1 and 2. NPL Report. MAT 108

Fry, A T (2002) Residual stress measurement: XRD depth profiling using successive material removal. NPL Report. MATC(MN)34

Fry, A T (2005) Residual stress measurement: XRD depth profiling using successive material removal. NPL Report. DEPC-MN 024

Fry, A T (2002) Sensitivity evaluation for X-ray diffraction residual stress measurements. NPL Report. MATC(A)104

Fry, A T (2005) A study of factors that may influence the quality of residual stress measurements from X-ray diffraction. NPL Report. DEPC-MN 023

Fry, A T; Crocker, L E; Lodeiro, M J; Poole, M; Woolliams, P; Koko, A; Leung, N; England, D; Breheny, C (2023) Tensile property measurement of lattice structures. NPL Report. MAT 119

Fry, A T; Crocker, L E; Woolliams, P; Poole, M; Koko, A; Breheny, C (2024) Tensile property measurement of AlSi10Mg lattice structures – from single strut to lattice networks. In: 10th International Conference on Advances in Materials, Manufacturing and Repair for Power Plants (AM-EPRI 2024), 15-18 October 2024, Bonita Springs, FL, USA.

Fry, A T; Lodeiro, M J; Koko, A; Booth-Downs, F; Crocker, L E (2023) Effect of specimen misalignment in static and fatigue testing of small-scale test pieces. NPL Report. MAT 122

Fry, T; Lodeiro, M (2024) Evaluation of Anisotropy in Additively Manufactured Materials Using Resonant Ultrasound Spectroscopy. Technical Report.

G

Gant, A J; Morrell, R (1999) CPD3 T3: Thermal cycling and mechanical properties of a unidirectional titanium matrix composite and a cross-ply ceramic matrix composite. NPL Report. CMMT(A)188

Gant, A J; Roebuck, B; James, W B* (2004) Notch fatigue tests on a hybrid alloy PM steel. In: PM 2004 World Conference on PM, October 2004, Vienna, Austria.

Gee, M G; Jennett, N M (1994) Evaluation of the mechanical properties of tribochemical. In: Thin Films: Stresses and Mechanical Properties V Symposium, 28 November - 2 December 1994, Boston, USA.

Gee, M G; Mingard, K P; Roebuck, B (2009) Application of EBSD to the evaluation of plastic deformation in the mechanical testing of WC/Co hardmetal. Int. J. Refrac. Met. Hard Mat., 27 (2). pp. 300-312.

Gower, M R L; Shaw, R M; Sims, G D (2005) Evaluation of the repeatability under static loading of a compression-after-impact test method proposed for ISO standardisation. NPL Report. DEPC-MN 036

Gower, M R L; Shaw, R M; Sims, G D (2007) The assessment of damage tolerance under long-term loading. Measurement Good Practice Guide. 101

Grant, P (2002) Evaluation of residual stress measurement uncertainties using X-ray diffraction and hole drilling via a UK intercomparison exercise. NPL Report. MATC(MN)020

Grant, P V; Lord, J D (2002) An evaluation of four hole drilling analysis techniques with respect to non-uniform residual stress fields. NPL Report. MATC(MN)31

Grant, P V; Lord, J D; Whitehead, P S* (2006) The measurement of residual stresses by the incremental hole drilling technique. Measurement Good Practice Guide. 53

H

Hahner, P*; Rinaldi, C*; Bicego, V*; Affeldt, E*; Brendel, T*; Andersson, H*; Beck, T*; Klingelhoffer, H*; Kuhn, H J*; Koster, A*; Loveday, M S; Marchionni, M*; Rae, C* (2008) Research and development into a European strain-controlled thermo-mechanical code-of-practice for fatigue testing. Int. J. Fatigue, 30 (2). pp. 372-381.

Hou, X D; Alvarez, C L M*; Jennett, N M* (2017) Establishing isothermal contact at a known temperature under thermal equilibrium in elevated temperature instrumented indentation testing. Meas. Sci. Technol., 28 (2). 025016

Hou, X.; Jennett, N M (2012) Application of a modified slip-distance theory to the indentation of single-crystal and polycrystalline copper to model the interactions between indentation size and structure size effects. Acta. Mater., 60 (10). pp. 4128-4135.

I

Ingelbrecht, C D*; Loveday, M S (2000) The certification of ambient temperature tensile properties of a reference material for tensile testing according to EN10002-1: CRM 661. Technical Report. European Commision.

K

Kandil, F A (1995) Code of practice for the measurement of bending in uniaxial low cycle fatigue testing. UNSPECIFIED, Teddington. ISBN 0946754160

Kandil, F A (1998) Code of practice for the measurement of bending in uniaxial low cycle fatigue testing. Measurement Good Practice Guide. 1

Kandil, F A (1999) A method for the verification of alignment of uniaxial test systems. In: National Measurement Conference (NMC) 1999, 2-4 November 1999, Brighton, UK.

Kandil, F A; Lord, J D; Fry, A T; Grant, P V (2001) A review of residual stress measurement methods - a guide to technique selection. NPL Report. MATC(A)04

Kareer, A*; Hou, X D; Jennett, N M*; Hainsworth, S V* (2016) The existence of a lateral size effect and the relationship between indentation and scratch hardness. Philos. Mag., 96 (32-34). pp. 3396-3413.

Kareer, A*; Hou, X D; Jennett, N M*; Hainsworth, S V* (2016) The interaction between lateral size effect and grain size when scratching polycrystalline copper using a Berkovich indenter. Philos. Mag., 96 (32-34). pp. 3414-3429.

Koko, A; Becker, T H (2024) Mixed-mode fracture: Combination of Arcan fixture and stereo-DIC. Theoretical and Applied Fracture Mechanics Part B, 134. 104724

Koko, A; Fry, A T; Mingard, K (2024) Uncertainties of in situ micromechanical testing of additive layer manufacturing (ALM) materials. NPL Report. MAT 128

Kowalewski, Z L*; Hayhurst, D R*; Dyson, B F (1994) Mechanisms-based creep constitutive equations for an aluminium alloy. J. Strain Anal., 29 (4). 309 - 316

L

Lacey, A J*; Loveday, M S*; Mahon, G J*; Roebuck, B; Sellars, C M*; van der Winden, M R* (2006) Measuring flow stress in hot plane strain compression tests. Mater. High Temp., 23 (2). pp. 85-118.

Lin, J*; Hayhurst, D R*; Dyson, B F (1993) The standard ridged uniaxail testpiece: computed accuracy of creep strain. J. Strain Anal. Eng. Des., 28 (2). pp. 101-115.

Lord, J D (2004) Characterisation of high volume fraction MMCs Part I: mechanical properties. NPL Report. DEPC-MN 005

Lord, J D (1993) Intercomparison exercise to measure the eleastic tensile properties of a fibre reinforced metal matrix composite. NPL Report. DMM(A)83

Lord, J D (1999) Proposed tensile test method for measuring the Young's Modulus of particulate reinforced MMCs. NPL Report. CMMT(MN)039

Lord, J D (2002) Review of methods and analysis software for the determination of modulus from tensile tests. NPL Report. MATC(MN)41

Lord, J D (1997) Strain gauge techniques for measuring thermal expansion. NPL Report. CMMT(MN)012

Lord, J D; Bennett, E G (2001) Isothermal fatigue testing of particulate metal matrix composites. NPL Report. MATC(MN)05

Lord, J D; Fry, A T; Grant, P V (2002) A UK residual stress intercomparison exercise - an examination of the XRD and hole drilling techniques. NPL Report. MATC(A)98

Lord, J D; Morrell, R (2010) Elastic modulus measurement - obtaining reliable data from the tensile test. Metrologia, 47 (2). S41-S49

Lord, J D; Morrell, R (2007) Elastic modulus measurement. Measurement Good Practice Guide. 98

Lord, J D; Nimmo, W; Cooper, D*; Morrell, R (1997) Strain gauge techniques for measuring thermal expansion. NPL Report. CMMT(A)68

Lord, J D; Orkney, L P (1999) Elevated temperature modulus measurements for discontinuously reinforced metal matrix composites. NPL Report. CMMT(MN)038

Lord, J D; Orkney, L P (2000) Elevated temperature modulus measurements using impulse excitation techniques (IET). NPL Report. CMMT(MN)049

Lord, J D; Penn, D; Whitehead, P* (2010) The application of digital image correlation for measuring residual stress by incremental hole drilling. Appl. Mechan. Mater., 13-14. pp. 65-73.

Lord, J D; Roebuck, B (1997) Elevated temperature tensile tests in discontinuously reinforced MMC. Technical Report.

Lord, J D; Roebuck, B (1997) Recommended methods for determining Young's modulus for tensile tests. NPL Report. CMMT(MN)016

Loveday, M S (2001) High temperature flow stress measurements: Quality and traceablity issues. NPL Report. CMMT(MN)062

Loveday, M S (1994) Reference materials for mechanical testing and uncertainty of measurement. In: 2nd Eurolab Int. Symp. Testing for the year 2000, 1994, Florence, Italy.

Loveday, M S; Mahon, G J*; Roebuck, B; Sellars, C M*; van der Winden, M R* (2002) Measuring flow stress in plane strain compression tests. Measurement Good Practice Guide. 27

M

Maxwell, A S (2005) Measurement of residual stress in plastics. NPL Report. DEPC-MN 027

Maxwell, A S; Turnbull, A (2003) Measurement of residual stress in engineering plastics using the hole-drilling technique. Polym. Test., 22. pp. 231-233.

Maxwell, A S; Turnbull, A (2000) Measurement of residual stress in polymeric materials. In: 6th International Conference on Residual Stress, July 2000, Institute of Materials, UK.

McCartney, L N (1996) Stress transfer mechanics: models that should be the basis of life prediction methodology. ASTM STP- 'Life prediction methodology for Titanium Matrix Composites', 1253. pp. 85-113.

Mera, R D; Sims, G D (2003) Round-robin validation exercise for the thick adherend shear test in compression. NPL Report. MATC(MN)46

Monclus, M A; Young, T J; Di Maio, D (2010) AFM indentation method used for elastic modulus characterization of interfaces and thin layers. J. Mater. Sci., 45 (12). pp. 3190-3197.

Morrell, R (1999) Biaxial flexural strength testing - a review. Institute of Materials, 718 (2). pp. 561-562.

Morrell, R (2007) Biaxial flexural strength testing of ceramic materials. Measurement Good Practice Guide. 12

Morrell, R (2007) Investigation of an elastic modulus reference material. NPL Report. DEPC-MPE 035

Morrell, R (2001) Mechanical tests for advanced technical ceramics - development of standardised procedures. Nondestruct. Test. Eval., 17 (4-5). pp. 299-314.

Morrell, R; Danzer, R*; Supancic, P*; Harrer, W*; Puchegger, S*; Peterlik, H* (2010) Meso-scale mechanical testing methods for diamond composite materials. Int. J. Refrac. Met. Hard Mat., 28 (4). pp. 508-515.

Morrell, R; Hendrix, M*; De With, G*; Vandermeulen, W*; Le Doussal, H*; Kromp, K*; Rudolph, E* (1999) Young's modulus of ceramic materials - an intercomparison of methods. Institute of Materials, 718 (2). pp. 565-566.

Morrell, R; Kent, J (2015) The effect of test-piece chamfers on the determination of elastic moduli using the impact excitation method. NPL Report. MAT 77

Morrell, R; McCormick, N J; Bevan, N; Lodeiro, M*; Margetson, J* (1999) Biaxial disc flexure - modulus and strength testing. Br. Ceram. Trans. J., 98 (5). pp. 234-240.

Morrell, R; McCormick, N J; Lay, L A (2015) Edge chipping of ceramic cutting tools. NPL Report. MAT 76

Morrell, R; Roebuck, B (2007) Quantitative challenges in characterising the mechanical properties of hard materials. MAPAN - J Metrology Soc. India, 23 (3). pp. 153-166.

N

Niklewicz, J; Sims, G D (1999) Round-robin validation exercise for three structural test methods: open-hole compression, open-hole tension and pin-bearing. NPL Report. CMMT(MN)043

Nimmo, W; Sims, G D (1995) Round-robin validation exercise for plate twist test method. NPL Report. DMM(A)156

Nunn, J W (2015) Measuring Young's Modulus the easy way, and tracing the effects of measurement uncertainties. Phys. Educ., 50 (5). pp. 538-547.

Nunn, J W (2014) The bounce meter. Phys. Educ., 49 (3). pp. 303-309.

O

Osgerby, S; Banks, J P (2006) Experimental aspects of small punch testing at elevated temperatures. NPL Report. DEPC-MPE 029

Osgerby, S; Nunn, J W; Banks, J P; Maxwell, A S; Aldrich-Smith, G (2003) Young's Modulus measurement for coatings used in gas turbines. NPL Report. MATC(MN)54

Othman, A M*; Hayhurst, D R*; Dyson, B F (1993) Skeletal point stresses in circumferentially notched tension bars undergoing tertiary creep modelled with physically based consitutive equations. Proc. R. Soc. Lond. A, Math. Phys. Sci., 441 (1912). pp. 343-358.

R

Roebuck, B (2002) Mechanical measurements for hardness. VAMAS Bulletin, 25. p. 41.

Roebuck, B (2001) Miniature multiproperty tests at elevated temperatures. Metallurgia, 68 (7). pp. 9-11.

Roebuck, B (1996) Tensile tests for discontinuously reinforced metal matrix composites. Technical Report.

Roebuck, B; Brooks, M (2007) Uniaxial tests using a miniaturised test method p11 and p12 alloy steels. NPL Report. DEPC_MPE 030

Roebuck, B; Brooks, M; Gee, M G (2002) Load cell ringing in high rate compression tests. NPL Report. MATC(MN)18

Roebuck, B; Brooks, M; Gee, M G (2004) Load cell ringing in high rate compression tests. Applied Mechanics and Materials, 1-2. pp. 205-210.

Roebuck, B; Brooks, M; Gee, M G (1998) Preliminary elevated temperature mechanical tests in the ETMT. NPL Report. CMMT(A)121

Roebuck, B; Brooks, M; Pearce, A* (2016) Good practice guide for miniature ETMT tests. Measurement Good Practice Guide. 137

Roebuck, B; Brown, L; Banks, J; Brooks, R; Evans, M* (2007) Miniaturised testing. NPL Report. DEPC-MPE 042

Roebuck, B; Gee, M G; Brooks, M; Cox, D; Reed, R (1999) Miniature multiproperty tests at elevated temperatures. In: COMPASS'99 - Component Optimisation from Materials Properties and Simulated Software, 29 March - 1 April 1999, Univ. of Wales, Swansea.

Roebuck, B; Klose, P*; Mingard, K P (2012) Hardness of hexagonal tungsten carbide crystals as a function of orientation. Acta Mater., 60 (17). pp. 6131-6143.

Roebuck, B; Lord, J D (1996) Standardisation of high temperature tensile tests for discontinuously reinforced metal matrix composites. NPL Report. CMMT(MN)002

Roebuck, B; Lord, J D; Brooks, M; Loveday, M S; Sellars, C M*; Evans, R W* (2002) Measuring flow stress in hot axisymmetric compression tests. Measurement Good Practice Guide. 3 (Issue 2)

Roebuck, B; Lord, J D; Brooks, M; Loveday, M S*; Sellars, C M*; Evans, R W* (2006) Measuring flow stress in hot axisymmetric compression tests. Mater. High Temp., 23 (2). pp. 59-83.

Roebuck, B; Lord, J D; McCartney, L N (1995) Validation of a draft tensile testing standard for discontinuously reinforced MMC. Technical Report.

Roebuck, B; Lord, J D; McCartney, L N (1995) Validation of a draft tensile testing standard for discontinuously reinforced MMC. VAMAS and UK MMC FORUM intercomparisons. NPL Report. DMM(A)161

Roebuck, B; Lord, J D; Orkney, L P (1994) Compression testing of metal matrix composites. In: ECCM CTS 2 (Testing and Standardisation) European Conference, 13-15 September 1994, Hamburg, Germany.

Roebuck, B; McCartney, L N; Cooper, P M; Bennett, E G; Orkney, L P (1992) UK interlaboratory tensile tests on Al alloy/SiC pariculate metal matrix composites. NPL Report. DMM(A)77

Roebuck, B; Orkney, L P; Lord, J D (2001) Validation of a miniature tensile strength measurement system. ASTM Spec. Tech. Publ., 1418. pp. 234-250.

Roebuck, B; Orkney, L P; Stewart, M; Varma, R K; Lord, J D (1996) Hot axisymmetric uniaxial compression tests, preliminary studies through a UK interlaboratory comparison. NPL Report. CMMT(A)28

Roebuck, B; Stewart, M; Brooks, M (2005) Mapping indentation hardness. NPL Report. DEPC-MN 030

Roebuck, B; Stewart, M; Morrell, R; Gee, M G (2001) Mapping hardness. Mater. World (Novemb). pp. 16-17.

Roebuck, B; Stewart, M; Morrell, R; Gee, M G; Plint, G* (2001) Mapping hardness using automated depth sensing process. Surf. Eng., 17 (6). pp. 447-449.

S

Saunders, S R J; Nagl, M M; Schütze, M* (1994) Measurement methods for the determination of fracture strain. Mater. High Temp., 12 (2-3). pp. 103-109.

Sharma, D; Parfitt, D; Chen, B; Roebuck, B; Venero, D A; Kada, S R; Fabijanic, D; Fitzpatrick, M E (2021) Influence of cooling rate on the precipitation kinetics of nanoscale isothermal ω-phase in metastable β-Ti alloy, Ti–5Al–5Mo–5V–3Cr. Journal of Alloys and Compounds, 859. 157822 ISSN 09258388

Shaw, R M; Sims, G D (2003) Round-robin validation exercise for the determination of pin bearing strength. NPL Report. MATC(MN)50

Shaw, R M; Sims, G D (2003) Round-robin validation exercise for the determination of through-thickness shear strength in compression. NPL Report. MATC(MN)48

Shaw, R M; Sims, G D (2004) Through-thickness tensile testing of polymer matrix composites. NPL Report. DEPC-MN 007

Sims, G D; Nimmo, W; Johnson, A F; Ferriss, D H (1994) Analysis of plate-twist test plane shear modulus of composite materials. NPL Report. DMM(A)54

Spetsieris, N; Lovelock, P; Shaw, R; Gower, M; Giannis, S (2024) Optimising grip designs for the tensile testing of fibre-reinforced polymer composites at cryogenic temperatures. In: ECCM21 21st European Conference on Composite Materials, 02-05 July 2024, Nantes, France.

T

Tang, Y T; D’Souza, N; Roebuck, B; Karamched, P; Panwisawas, C; Collins, D M (2021) Ultra-high temperature deformation in a single crystal superalloy: Mesoscale process simulation and micromechanisms. Acta Materialia, 203. 116468 ISSN 13596454

Tomlins, P E; Yazici, M*; Dean, G D (2000) On the determination of stress-strain curves under biaxial loading conditions. NPL Report. CMMT(A)298

Torres, Y*; Tarrago, J M*; Coureaux, D*; Tarres, E*; Roebuck, B; Chan, P*; James, M*; Liang, B*; Tillman, M*; Viswanadham, R K*; Mingard, K P; Mestra, A*; Llanes, L* (2014) Fracture and fatigue of rock bit cemented carbides: mechanics and mechanisms of crack growth resistance under monotonic and cyclic loading. Int. J. Refrac. Met. Hard Mat., 45. pp. 179-188.

Turnbull, A; Maxwell, A S; Pillai, S (1999) Residual stress in polymers - evaluation of measurement techniques. J. Mater. Sci., 34 (3). pp. 451-459.

Turnbull, A; Maxwell, A S; Pillai, S; White, J R* (1998) Residual stress in polymeric mouldings. Measurement Good Practice Guide. 10

Turnbull, A; Pitts, J J; Lord, J D (2006) Residual stress relaxation in shot-peened high strength low alloy steel. NPL Report. DEPC-MPE 024

W

Webster, G A*; Holdsworth, S R*; Loveday, M S; Perrin, I J*; Purper, H* (2001) A code of practice for conducting notched bar creep rupture tests and for interpreting the data. Technical Report. High Temperature Mechanical Testing Committee.

Z

Zhang, H; de Luca, F; Wang, H; Mingard, K; Gee, M (2022) Deformation mechanism of WC single crystal under nanoindentation: effects of surface defects and orientation on pop-in and hysteresis. International Journal of Refractory Metals and Hard Materials, 106. 105850

Zhou, S; Turnbull, A (1999) Influence of pitting on the fatigue life of a turbine blade steel. Fatigue Fract. Eng. Mater. Struct., 22 (12). pp. 1083-1094.