Beake, B D; Goodes, S R; Zhang, H; Isern, L; Chalk, C; Nicholls, J R; Gee, M G (2024) Randomised nano-/micro- impact testing – a novel experimental test method to simulate erosive damage caused by solid particle impacts. Tribology International, 195. 109647

Gee, M G; Mingard, K; Nunn, J W (2023) EBSD Evaluation of Damage in Micro-tribology Experiments on WC/Co Hardmetals. Wear, 524. 204784

Campbell, J E; Zhang, H; Burley, M; Gee, M G; Fry, A T; Dean, J; Clyne, T W (2021) A Critical Appraisal of the Instrumented Indentation Technique and Profilometry‐Based Inverse Finite Element Method Indentation Plastometry for Obtaining Stress–Strain Curves. Advanced Engineering Materials, 23 (5). 2001496 ISSN 1438-1656

Wang, H; Li, Yanan; Gee, M G; Zhang, H; Liu, X; Song, X (2020) Sliding wear resistance enhancement by controlling W2C precipitation in HVOF sprayed WC-based cermet coating. Surface and Coatings Technology, 387. 125533 ISSN 02578972

Iakovakis, E; Roy, M J; Gee, M G; Matthews, A (2020) Evaluation of wear mechanisms in additive manufactured carbide-rich tool steels. Wear, 462-46. 203449 ISSN 00431648

Williamson, E H; Gee, M G; Robertson, D; Watts, J F; Whiting, M J; Yeomans, J A (2019) Wear performance and characterisation of coatings for nuclear applications: WC-(W,Cr)2C-Ni and hard chromium plate. Wear, 430-43. pp. 169-182. ISSN 00431648

Lu, P; Wood, R J K; Gee, M G; Wang, L; Pfleging, W (2018) A novel surface texture shape for directional friction control. Tribology Letters, 66 (1). 51

Mingard, K; Roebuck, B; Jones, H; Stewart, M; Cox, D; Gee, M G (2018) Visualisation and measurement of hardmetal microstructures in 3D. International Journal of Refractory Metals & Hard Materials, 71. pp. 285-291.

Mingard, K; Stewart, M; Gee, M G; Vespucci, S; Trager-Cowan, C (2018) Practical application of direct electron detectors to EBSD mapping in 2D and 3D. Ultramicroscopy, 184. pp. 242-251.

Wolski, M; Podsiadio, P; Stachowiak, G W; Holmberg, K; Laukkanen, A; Ronkainen, H; Gee, M G; Nunn, J; Gachot, C; Li, L (2017) Multiscale characterisation of 3D surface topography of DLC coated and uncoated surfaces by directional blanket covering (DBC) methods. Wear, 388. pp. 47-56.

Laukkanen, A; Holmberg, K; Ronkainen, H; Stachowiak, G; Podsiadlo, P; Wolski, M; Gee, M G; Gachot, C; Li, L (2017) Topographical orientation effects on surface stresses influencing on wear in sliding DLC contacts, part 2: modelling and simulations. Wear, 388. pp. 18-28.

Nunn, J; Gee, M G; Orkney, L; Fry, A T (2017) In situ remote hot erosion scar measurement. Wear, 380-38. pp. 217-227.

Gee, M G; Mingard, K P; Nunn, J; Roebuck, B; Gant, A (2017) In situ scratch testing and abrasion simulation of WC/Co. Int. J. Refrac. Met. Hard Mat., 62. pp. 192-201.

Gant, A J; Nunn, J W; Gee, M G; Gorman, D; Gohil, D D; Orkney, L P (2017) New perspectives in hardmetal abrasion simulations. Wear, 376. pp. 2-14.

Gee, M G; Nunn, J (2017) Real time measurement of wear and surface damage in the sliding wear of alumina. Wear, 376. pp. 1866-1876.

Fry, A T; Lovelock, P; Smith, N; Gee, M G; Gant, A J (2017) An innovative high temperature solid particulate erosion testing system. Wear, 376. pp. 458-467.

Lu, P*; Wood, R J K*; Gee, M G; Wang, L*; Pfleging, W* (2017) The use of anisotropic texturing for control of directional friction. Tribol. Int., 113. pp. 169-181.

Mingard, K P; Cox, D C; Jones, H G; Gee, M G (2016) The use of focused ion beam microscopy for 3D material characterisation. Measurement Good Practice Guide. 141

Fry, A T; Gorman, D; Crocker, L E; Gee, M G; Gant, A; Nicholls, J*; Rose, T*; Cernuschi, F*; Lorenzoni, L*; Guardamagna, C* (2016) Influence of apparatus design and test methods on the high temperature solid particle erosion of nimonic 80A. In: Proceedings of the 8th International Conference on Advances in Materials Technology for Fossil Power Plants, 10-14 October 2017, Algarve, Portugal.

Lu, P*; Wood, R J K*; Gee, M G; Wang, L*; Pfleging, W* (2016) The friction reducing effect of square-shaped surface textures under lubricated line-contacts - an experimental study. Lubricants, 4 (3). p. 33.

Holmberg, K*; Laukkanen, A*; Ronkainen, H*; Waudby, R*; Stachowiak, G*; Wolski, M*; Podsiadlo, P*; Gee, M G; Nunn, J; Gachot, C*; Li, L* (2015) Topographical orientation effects on friction and wear in sliding DLC and steel contacts, part 1: experimental. Wear, 330. pp. 3-22.

Gant, A J; Gee, M G (2015) Wear modes in slurry jet erosion of tungsten carbide hardmetals: their relationship with microstructure and mechanical properties. Int. J. Refrac. Met. Hard Mat., 49. pp. 192-202.

Mingard, K P; Jones, H G; Gee, M G (2014) Metrological challenges for reconstruction of 3D microstructures by focused ion beam tomography methods. J. Microsc., 253 (2). pp. 93-108.

Mingard, K P; Jones, H G; Gee, M G; Roebuck, B; Nunn, J W (2013) In situ observation of crack growth in a WC-Co hardmetal and characterisation of crack growth morphologies by EBSD. Int. J. Refrac. Met. Hard Mat., 36. pp. 136-142.

Borgh, I*; Hedstrom, P*; Odqvist, J*; Borgenstam, A*; Agren, J*; Gholinia, A*; Winiarski, B*; Withers, P J*; Thompson, G E*; Mingard, K P; Gee, M G (2013) On the three-dimensional structure of WC grains in cemented carbides. Acta Mater., 61 (13). pp. 4726-4733.

Wang, C T*; Gao, N*; Gee, M G; Wood, R J K*; Langdon, T G* (2013) Processing of an ultrafine-grained titanium by high-pressure torsion: an evaluation of the wear properties with and without a TiN coating. J. Mechan. Behav. Biomed. Mater., 17. pp. 166-175.

Pignie, C*; Gee, M G; Nunn, J W; Jones, H*; Gant, A J (2013) Simulation of abrasion to WC/Co hardmetals using a micro-tribology test system. Wear, 302 (1-2). pp. 1050-1057.

Wang, C T*; Gao, N*; Gee, M G; Wood, R J K*; Langdon, T G* (2013) Tribology testing of ultrafine-grained Ti processed by high-pressure torsion with subsequent coating. J. Mater. Sci., 48 (13). pp. 4742-4748.

Gant, A J; Gee, M G; Gohil, D D; Jones, H G; Orkney, L P (2013) Use of FIB/SEM to assess the tribo-corrosion of WC/Co hardmetals in model single point abrasion experiments. Tribol. Int., 68. pp. 56-66.

Wang, C T*; Geo, N*; Gee, M G; Wood, R J K*; Langdon, T G* (2012) Effect of grain size on the micro-tribological behavior of pure titanium processed by highpressure torsion. Wear, 280. pp. 28-35.

Burke, T*; Leach, R K; Boyd, R; Gee, M G; Roy, D; Yacoot, A; Ulrich-Danzebrink, H*; Dziomba, T*; Koenders, L*; Depero, L E*; Carneiro, K*; Dirschel, K*; Morazzani, V*; Lausmaa, J*; Pendrill, L*; Pidduck, A*; Roebben, G*; Sánchez, A*; Unger, W E S*; Proykova, A* (2011) European Nanometrology 2020. Technical Report. Co-Nanomet.

Leach, R K; Boyd, R; Burke, T*; Danzebrink, H-U*; Dirscherl, K*; Dziomba, T*; Gee, M G; Koenders, L*; Morazzani, V*; Pidduck, A*; Roy, D; Unger, W E S*; Yacoot, A (2011) The European nanometrology landscape. Nanotechnology, 22. 062001

Gee, M G; Nunn, J W; Muniz-Piniella, A; Orkney, L P (2011) Micro-tribology experiments on engineering coatings. Wear, 271 (9-10). pp. 2673-2680.

Gee, M G; Nimishakavi, L (2011) Model single point abrasion experiments on WC/Co hardmetals. Int. J. Refrac. Met. Hard Mat., 29 (1). pp. 1-9.

Gee, M G; Brown, L; Bennett, E G (2011) Optical evaluation of wear volumes. In: 13th International Conference on Metrology and Properties of Engineering Surfaces., 12-15 April 2011, Twickenham Stadium, UK.

Gant, A J; Gee, M G (2011) A review of micro-scale abrasion testing. J. Phys. D, Appl. Phys., 44 (7). 073001

Gant, A J; Gee, M G; Orkney, L P (2011) The wear and friction behaviour of engineering coatings in ambient air and dry nitrogen. Wear, 271 (9-10). pp. 2164-2175.

Fry, A T; Brown, L J; Gee, M G; Piedra, E* (2010) Procedures for steam oxidation testing of static and dynamic specimens. NPL Report. MAT 41

Gee, M G; Jennett, N M (2010) Accuracy counts. Mater. World, 18 (8). pp. 22-24.

Hansen, P-E*; Roebben, G*; Babick, F*; Boyd, R; Braun, A*; Busch, I*; Danzebrink, H-U*; Depero, L*; Dirscherl, K*; Dziomba, T*; Eriksson, E*; Franks, K*; Gee, M G; Jennett, N M; Kestens, V*; Koenders, L*; Krumrey, M*; Lausmaa, J*; Leach, R K; Pendrill, L*; Pidduck, A*; Put, S*; Roy, D; Stintz, M*; Turan, R*; Yacoot, A (2010) Introductory guide to nanometrology. Technical Report. European Commission.

Gee, M G (2010) Model scratch corrosion studies for WC/Co hardmetals. Wear, 268 (9-10). pp. 1170-1177.

Roebuck, B; Gee, M G; Bennett, E G; Morrell, R (2009) Mechanical tests for hardmetals. Measurement Good Practice Guide. 20

Gee, M G; Mingard, K P; Roebuck, B (2009) Application of EBSD to the evaluation of plastic deformation in the mechanical testing of WC/Co hardmetal. Int. J. Refrac. Met. Hard Mat., 27 (2). pp. 300-312.

Mingard, K P; Roebuck, B; Bennett, E G; Gee, M G; Nordenstrom, H*; Sweetman, G*; Chan, P* (2009) Comparison of EBSD and conventional methods of grain size measurement of hardmetals. Int. J. Refrac. Met. Hard Mat., 27 (2). pp. 213-223.

Winkless, L; Martinot, E; Gee, M G; Cuenat, A (2009) Micro-tribology friction measurements on microtextured silicon. Tribology - Mater. Surf. Interfaces, 3 (4). pp. 165-174.

Gant, A J; Gee, M G (2009) Sliding wear corrosion testing of ceramics. Wear, 267 (Part 1). pp. 599-607.

Gant, A J; Gee, M G (2009) Structure-property relationships in liquid jet erosion of tungsten carbide hardmetals. Int. J. Refrac. Met. Hard Mat., 27 (2). pp. 332-343.

Bennett, E G; Gee, M G; Lay, L A; Morrell, R; Roebuck, B (2007) Tests for advanced technical ceramic materials performance. Measurement Good Practice Guide. 19

Mingard, K P; Gee, M G (2007) Measurement of wear with chromatic aberration probe. NPL Report. DEPC-MN 045

Mingard, K P; Gee, M G (2007) EBSD examination of worn WC/Co hardmetals surfaces. Wear, 263 (1-6). pp. 643-652.

Gee, M G; Gant, A J; Roebuck, B (2007) Wear mechanisms in abrasion of WC/Co and related hardmetals. Wear, 263 (1-6). pp. 137-148.

Gee, M G; Gee, A D* (2007) A cost effective system for micro-tribology experiments. Wear, 263 (7-12). pp. 1484-1491.

Gant, A J; Gee, M G; Plint, G* (2007) A new concept in liquid jet erosion: commissioning and proving trials. Wear, 263 (1-6). pp. 284-288.

Gee, M G; Hutchings, I M*; Santner, E* (2006) Friction and wear. In: Handbook of Materials Measurement Methods. Springer. ISBN 9783540207856

Tomlins, P; Petrie, H*; King, N*; Crocker, L E; Gee, M G; Dean, G D; Rides, M (2006) Predicting and measuring the feel of soft-touch thermoplastic elastomers. Measurement Good Practice Guide. 86

Newton, L; Gee, M G; Morrell, R (2005) Scratch edge chipping. NPL Report. DEPC-MN 026

Tomlins, P E; Rides, M; Dawson, A; Gee, M G; Dean, G D; Hobbs, C B; Allen, C R G; Gnaniah, S J P; Calver, A; Darling, R (2005) Physical characterisation of soft-touch polymers. NPL Report. DEPC-MPR 025

Gee, M G; Newton, L (2005) The determination of residual stresses in coatings by coupon bending. NPL Report. DEPC-MN 025

Gee, M G; McCormick, N J; Newton, L; Darling, R (2005) Analysis of the size and shape of abrasives. NPL Report. DEPC-MPE 009

McCormick, N J; Gee, M G (2005) The measurement of the shape of abrasive particles with confocal optical microscopy. NPL Report. DEPC-MPE 010

Gee, M G; Roebuck, B; Gant, A (2005) Abrasive wear testing with the ASTM B611 and modified ASTM G65 rotating wheel test systems. In: 16th International Plansee Seminar - High Performance PM Materials, 30 May - 3 June 2005, Reutte, Austria.

Roebuck, B; Edwards, G J; Gee, M G (2005) Characterisation of oxidising metal surfaces with a two colour pyrometer. Meas. Sci. Technol., 21 (7). pp. 831-840.

Gant, A J; Gee, M G; Roebuck, B (2005) Rotating wheel abrasion of WC/Co hardmetals. Wear, 258. pp. 178-188.

Gee, M G; Gant, A; Hutchings, I M*; Kusano, Y*; Schiffman, K*; van Acker, K*; Poulat, S*; Gachon, Y*; von Stebut, J*; Hatto, P*; Plint, G* (2004) CRATER: interlaboratory exercise description, procedure and results. NPL Report. MATC(A)168

Roebuck, B; Brooks, M; Gee, M G (2004) Load cell ringing in high rate compression tests. Applied Mechanics and Materials, 1-2. pp. 205-210.

Roebuck, B; Gee, M G; Gant, A; Loveday, M S (2003) Miniature thermo-mechanical ramping tests for accelerated material discrimination. ASTM Spec. Tech. Publ., 1428. pp. 270-281.

Gee, M G; Gant, A; Hutchings, I*; Bethke, R*; Schiffman, K*; Van Acker, K*; Poulat, S*; Gachon, Y*; von Stebut, J* (2003) Progress towards standardisation of ball cratering. Wear, 255. pp. 1-13.

Gee, M G; Gee, R H; McNaught, I (2003) Stepwise erosion as a method for determining the mechanisms of wear in gas borne particulate erosion. Wear, 255. pp. 44-54.

Gee, M G; Gant, A; Hutchings, I*; Bethke, R*; Schiffman, K*; Van Acker, K*; Poulat, S*; Gachon, Y*; von Stebut, J* (2002) Ball cratering or micro-abrasion wear testing of coatings. Measurement Good Practice Guide. 57

Gee, M G; McNaught, I (2002) Stepwise erosion to determine the mechanisms of wear in gas borne particulate erosion. NPL Report. MATC(MN)32

Roebuck, B; Brooks, M; Gee, M G (2002) Load cell ringing in high rate compression tests. NPL Report. MATC(MN)18

Roebuck, B; Gee, M G (2002) Guide to ramped miniature thermomechanical tests for accelerated material discrimination in hardmetals. NPL Report. MATC(MN)15

Gee, M G; Gant, A; Hutchings, I M* (2002) Rotating wheel abrasive wear testing. Measurement Good Practice Guide. 55

Gee, M G; Neale, M J* (2002) General approach and procedures for unlubricated sliding wear tests. Measurement Good Practice Guide. 51

Gee, M G; Hutchings, I M* (2002) General approach and procedures for erosive wear testing. Measurement Good Practice Guide. 56

Gee, M G; Gant, A; Hutchings, I*; Bethke, R*; Schiffman, K*; Van Acker, K*; Poulat, S*; Gachon, Y*; von Stebut, J* (2001) Critical evaluation of abrasion and wear testing of coatings by ball cratering. NPL Report. MATC(A)62

Gee, M G (2001) Wear testing standards database. NPL Report. MATC(A)07

Gee, M G (2001) Procedure for gas jet erosion testing. NPL Report. MATC(A)53

Gee, M G; Gant, A (2001) Procedure for rotating wheel abrasion testing. NPL Report. MATC(A)54

Brooks, M; Loveday, M S; Gee, M G (2001) NPL Friction Measurement Methods: data assessment techniques and a sample database. NPL Report. MATC(A)13

Gee, M G (2001) Procedure for ball cratering test. NPL Report. MATC(A)52

Roebuck, B; Gee, M G; Morrell, R (2001) Hardmetals - microstructural design, testing and property maps. In: 15th Plansee Seminar, June 2001, Reutte, Austria.

Gee, M G (2001) Low load multiple scratch tests of ceramics and hardmetals. Wear, 250 (Part 1). pp. 264-281.

Roebuck, B; Stewart, M; Morrell, R; Gee, M G (2001) Mapping hardness. Mater. World (Novemb). pp. 16-17.

Roebuck, B; Stewart, M; Morrell, R; Gee, M G; Plint, G* (2001) Mapping hardness using automated depth sensing process. Surf. Eng., 17 (6). pp. 447-449.

Gant, A J; Gee, M G (2001) Wear of tungsten carbide-cobalt hardmetals and hot isostatically pressed high speed steels under dry abrasive conditions. Wear, 251. pp. 908-915.

Roebuck, B; Bennett, E G; Gee, M G; Stewart, M S (2001) A scanning depth sensing hardness test system to characterise hardmetals. In: 15th Plansee Seminar, 28 May - 1 June 2001, Reutte, Austria.

Andrews, A S; Butterfield, D M; Gee, M G; Robinson, R A (2000) UK ambient hydrocarbon air quality network: 1999 audit report. NPL Report. COEM 52

Gee, M G; Alliston-Greiner, A* (2000) Associate programme: tribology in foresight. Framework document. NPL Report. CMMT(A)259

Gee, M G; Wicks, M J (2000) Ball crater testing for the measurement of the unlubricated sliding wear of wear-resistant coatings. Surf. Coat. Technol., 133-13. pp. 376-382.

Neale, M J*; Gee, M G (2000) Guide to wear problems and testing for industry.

Gee, M G; Roebuck, B (2000) Tungsten carbide for abrasion resistant applications. In: IMechE Conf. Powder Metallurgy in Design for Wear, Corrosion and Fatigue Resistance, 2000.

Gee, M G; Gant, A; Byrne, W P; Roebuck, B (1999) Abrasion and reciprocating wear of hardmetals and ceramics. NPL Report. CMMT(A)166

Gee, M G; Gant, A; Van der Berg, L (1999) Fine scale abrasion testing of hardmetals and ceramics. NPL Report. CMMT(A)175

Gee, M G; van den Berg, L (1999) Low load multiple scratch tests for ceramics and hardmetals. NPL Report. CMMT(MN)045

Stewart, M; Cain, M G; Gee, M G (1999) Method of measuring piezoelectric displacement in piezoelectric ceramics. Measurement Good Practice Guide. 23

Roebuck, B; Bennett, E G; Byrne, W P; Gee, M G (1999) Characterisation of baseline hardmetals using property maps. NPL Report. CMMT(A)172

Lowrie, F*; Cain, M G; Stewart, M; Gee, M G (1999) Time dependent behaviour of piezo-electric materials. NPL Report. CMMT(A)151

Cain, M G; Stewart, M; Gee, M G (1999) Degradation of piezoelectric materials. NPL Report. CMMT(A)148

Cain, M G; Stewart, M; Gee, M G (1999) Real time evaluation of piezoelectric materials. NPL Report. CMMT(A)149

Dary, F-C*; Roebuck, B; Gee, M G (1999) Effects of microstructure on the thermo-mechanical fatigue response of hardmetals using a new miniaturzed testing rig. Int. J. Refrac. Hard Mat., 17 (1-3). pp. 45-53.

Gee, M G; Fang, L*; Roebuck, B (1999) Mechanisms of wear in the high stress abrasion of WC/Co hardmetals. In: EURO PM99, 8-10 November 1999, Turin.

Roebuck, B; Gee, M G; Brooks, M; Cox, D; Reed, R (1999) Miniature multiproperty tests at elevated temperatures. In: COMPASS'99 - Component Optimisation from Materials Properties and Simulated Software, 29 March - 1 April 1999, Univ. of Wales, Swansea.

Roebuck, B; Gee, M G; Bennett, E G (1999) Modelling hardness variations in WC/Co hardmetals with a wide grain size distribution. In: EURO PM99, 8-10 November 1999, Turin.

Gee, M G; Roebuck, B (1999) Tungsten carbide for abrasion resistant applications. In: Proceedings IMechE Conference on Powder Metallurgy Materials for Tribology, 17 September 1999, London, UK.

Gee, M G; Gant, A J; Byrne, W P (1998) An NPL rotating wheel abrasion test. NPL Report. CMMT(MN)030

Roebuck, B; Brooks, M; Gee, M G (1998) Preliminary elevated temperature mechanical tests in the ETMT. NPL Report. CMMT(A)121

Gee, M G; Owen-Jones, S (1998) Wear testing methods and their relevance to industrial wear problems. NPL Report. CMMT(A)92

Cain, M G; Stewart, M; Gee, M G (1998) Experimental measurement methods for the evaluation of degradation in piezoelectric ceramics. NPL Report. CMMT(A)116

Loveday, M S; Saunders, S R J; Gee, M G (1998) Some methods for the determination of the strength of oxides. NPL Report. CMMT(A)96

Roebuck, B; Gee, M G; Lord, J D; McCartney, L N (1998) Miniature thermal cycling tests on aluminium alloy metal matrix composites. Mater. Sci. Technol., 14 (Sept -). pp. 1001-1008.

Owen-Jones, S; Gee, M G (1997) Wear testing papers, reports and proceedings database. NPL Report. CMMT(A)90

Owen-Jones, S; Gee, M G (1997) Wear testing standards database. NPL Report. CMMT(A)89

Gee, M G; Cain, M G; Stewart, M (1997) Materials and test conditions for project Cam 7. NPL Report. CMMT(A)78

Gee, M G (1997) Surface characterisation techniques for wear surfaces. NPL Report. CMMT(A)73

Cox, J M; Morrell, R; Gee, M G (1997) Direct measurement of friction applicable to hot strength measurements. In: Proc. Euroceramics V, June 1997, Versailles, France.

Cox, J M; Morrell, R; Gee, M G (1997) Direct measurement of friction applicable to hot strength measurements. Key Eng. Mater., 132-6. pp. 476-479.

Cox, J M; Gee, M G (1997) Hot friction testing of ceramics. Wear (203-20). pp. 404-417.

Gee, M G; Loveday, M S; Brookes, M R (1997) Measurement of Friction Under Simulated Metal Working Conditions in Miniaturised Test Systems. In: World Tribology Congress, September 1997.

Roebuck, B; Gee, M G (1997) Modelling the effects of structure size distribution on the strength and toughness of hardmetals. In: 14th Int. Plansee Seminar, May 1997, Reutte, Austria.

Gee, M G; Stewart, M (1996) Actuate SMT project. Contract SMT4-CT95-2029. First report. NPL Report. CMMT(A)43

Gee, M G (1996) Final report and recommendations: project AM4, development of measurement methods for the characterisation of the high stress behaviour of piezoelectric, electrostrictive and magnetostrictive materials. NPL Report. CMMT(A)37

Gee, M G; McCormick, N J (1996) 3D topography measurement of ceramics. NPL Report. CMMT(A)35

Lord, J D; Gee, M G (1996) A review of methods for measuring small dimensional change due to thermal exposure in MMC and CMC. NPL Report. CMMT(A)14

Gee, M G; Roebuck, B; Lindahl, P*; Andren, H-O* (1996) Constituent phase nanoindentation of WC/Co and Ti(C,N) hardmetals. Mater. Sci. Eng., A209. pp. 128-136.

Roebuck, B; Gee, M G; Morrell, R (1996) Developments in testing and mechanical properties of hard materials. Powder Metall., 39 (3). pp. 213-218.

Roebuck, B; Gee, M G (1996) Miniaturised thermomechanical tests on hardmetals and cermets. Mater. Sci. Eng., 209. pp. 358-365.

Roebuck, B; Gee, M G (1996) Miniaturised thermomechanical tests on hardmetals and cermets. Mater. Sci. Eng.A, Struct. Mater., Prop. Microstruct., Process., 209 (1-2). pp. 358-362.

Gee, M G; Jennett, N M (1995) High resolution characterisation of tribochemical films on alumina. Wear, 193 (2). pp. 133-145.

Melandri, C*; Gee, M G; de Portu, G*; Guicciardi, S* (1995) High temperature friction and wear testing of silicon nitride ceramics. Tribol. Int., 28 (6). pp. 403-413.

Melandri, C*; Gee, M G; de Portu, G*; Guicciardi, S* (1995) High temperature wear behaviour of silicon nitride ceramics. In: Vincenzini, P ed. Advances in science and technology. 3B. UNSPECIFIED, pp. 1047-1054.

Dyson, B F; Loveday, M S; Gee, M G (1995) Materials metrology and standards for structural performance.

Von Rensberg, R J *; Humberstone, V *; Close, J A *; Taverner, A W *; Stevens, R *; Greenhough, R D *; O'Connor, K P *; Gee, M G (1994) Review of constitutive description and measurement methods for piezoelectric, electrostrictive and magnetostrictive materials. NPL Report. DMM(A)143

Gee, M G (1994) Questionnaire on conditions of use, and test method requirements for actuator and sensor materials. NPL Report. DMM(A)144

Gee, M G; Stewart, M; McCormick, N J (1994) Comparison of different methods for the displacement-field characterisation of piezoelectric materials. In: Electroceramics IV, 4th International conference on electronic ceramics and applications, 1994.

Shafirstein, G; Gee, M G; Osgerby, S; Saunders, S R J (1994) Error analysis in nanoindentation. In: Materials Research Society Symposium on Thim films: Stresses and mechanical properties V., November 1994, Boston, USA.

Gee, M G; Jennett, N M (1994) Evaluation of the mechanical properties of tribochemical. In: Thin Films: Stresses and Mechanical Properties V Symposium, 28 November - 2 December 1994, Boston, USA.

Gee, M G (1994) Sensored materials. Engineering (Septem). p. 31.

Gee, M G (1994) Wear testing and ceramics. Proc. Inst. Mech. Eng., 208 (J3). 153 - 166

Gee, M G (1993) Guidelines for unlubricated sliding wear tests: Part 1, general approach. NPL Report. DMM(A)96

Gee, M G (1993) Guidelines for unlubricated sliding wear tests: Part 2, procedures for pin-on-disc testing. NPL Report. DMM(A)97

Close, J A *; Stevens, R *; Gee, M G (1993) Piezoelectric measurements on impact loaded PZT ceramics. NPL Report. DMM(A)88

Roebuck, B; Bennett, E G; Gee, M G (1993) Grain size measurement methods for WC/Co hardmetals. In: 13th International Seminar on Wear Resistant Materials, May 1993, Reutte, Australia.

Butterfield, D; Gee, M G (1993) The combined effect of speed and humidity on the wear and friction of silicon nitride. Wear, 162-16 (A). pp. 234-245.