< back to main site

Publications

Items where Subject is "Advanced Materials > Polymer Rheology"

Up a level
Export as [feed] RSS
Group by: Authors | Item Type
Jump to: A | B | C | D | R
Number of items at this level: 47.

A

Allen, C R G; Rides, M (1996) Intercomparison of extrudate swell measurements using capillary extrusion rheometers for a polyethylene melt. NPL Report. CMMT(A)9

B

Brown, C S; Allen, C R G (1994) The measurement of viscosity by capillary rheometry: dwell time effects. NPL Report. DMM(A)140

Brown, C S; Allen, C R G; Rides, M; Sharma, L; Spitteler, P (2000) In-process monitoring of the flow properties of polymers for extrusion, compounding and injection moulding. NPL Report. CMMT(A)260

C

Chakravorty, S; Allen, C R G; Brown, C S (1997) In-line temperature measurement during polymer melt flow. Polym. Test., 16 (5). pp. 455-460.

Chakravorty, S; Allen, C R G; Brown, C S (1994) Temperature measurement of polymer melts during flow. NPL Report. DMM(A)137

D

Dawson, A; Rides, M; Nottay, J (2006) The effect of pressure on the thermal conductivity of polymer melts. NPL Report. DEPC-MPR 041

Dawson, A; Urquhart, J M; Rides, M (2008) The effect of heat transfer coefficients and thermal conductivity on polymer processing simulation. NPL Report. MAT 17

Dusek, M; Zou, L; Hunt, C (2002) Rheology testing of solder pastes and conductive adhesives - a guide. NPL Report. MATC(A)109

Dusek, M; Zou, L; Hunt, C (2002) Rheology testing of solder pastes and conductive adhesives used in stencil printing. NPL Report. MATC(A)102

R

Rides, M (1999) Extensional flow properties of polymer melts using stretching flow methods. Measurement Good Practice Guide. 18

Rides, M (1997) Extensional viscoelastic measurements of polymer melts. In: Proc. Polymer Process Engineering 97, July 1997, Bradford.

Rides, M (1996) Industrial need for extensional viscoelasticity measurements. NPL Report. CMMT(A)38

Rides, M (1993) Industrial needs for polymer melt elasticity measurements. NPL Report. DMM(A)131

Rides, M (1999) Measurement of the extensional flow properties of polymer melts using converging flow methods. Measurement Good Practice Guide. 16

Rides, M (2008) NPL aims to overcome failings in MFR testing. British Plastics & Rubber (Feb). p. 21.

Rides, M (2008) NPL is working to determine heat transfer properties. British Plastics & Rubber (Feb). p. 18.

Rides, M (1999) Review of melt mass flow rate and melt volume flow rate measurements for polymer melts. NPL Report. CMMT(A)231

Rides, M (2002) Review of the need and measurement methods for multi-axial testing of polymer melt rheology. NPL Report. MATC(A)32

Rides, M (2005) Rheological characterisation of filled materials: a review. NPL Report. DEPC-MPR 013

Rides, M (1994) Rheological measurement methods for fibre filled plastics. NPL Report. DMM(A)149

Rides, M (1994) Theoretical basis for elasticity measurements of polymer melts and rubbers. NPL Report. DMM(A)127

Rides, M (1998) The effects of thermal conductivity and heat transfer coefficients on polymer processing. NPL Report. CMMT(MN)023

Rides, M; Allen, C R G (1999) Extensional flow properties of polymer melts using converging flow methods. NPL Report. CMMT(MN)040

Rides, M; Allen, C R G (2002) Extensional flow properties of polymers using stretching flow methods. Measurement Good Practice Guide. 63

Rides, M; Allen, C R G (2002) Guide to the measurement of extensional flow properties of polymers. NPL Report. MATC(MN)43

Rides, M; Allen, C R G (2002) Guide to the measurement of the flow properties of polymers. NPL Report. MATC(MN)42

Rides, M; Allen, C R G (2001) High rate extensional rheometry of polymer melts. NPL Report. MATC(A)71

Rides, M; Allen, C R G (2002) Low rate extensional rheometry of polymer melts. NPL Report. MATC(A)114

Rides, M; Allen, C R G (1999) Measuring the extensional flow properties of polymer melts using stretching methods. NPL Report. CMMT(MN)41

Rides, M; Allen, C R G (1999) Measuring the extensional flow properties of polymer melts. NPL Report. CMMT(MN)037

Rides, M; Allen, C R G (2008) Recent and future developments in ISO standardisation for polymer melt rheology. In: Proceedings of the Polymer Processing Society 24th Annual Meeting - PPS-24, 15-19 June 2008, Salerno, Italy.

Rides, M; Allen, C R G (1996) Rheological measurements of polymer melts for characterisation and modelling material behaviour. NPL Report. CMMT(A)20

Rides, M; Allen, C R G (1996) Round robin for parallel plate oscillatory rheometry using polyethylene and polypropylene melts. NPL Report. CMMT(A)11

Rides, M; Allen, C R G (2006) Slip flow measurement by capillary extrusion rheometry. Measurement Good Practice Guide. 90

Rides, M; Allen, C R G (2007) The use of the melt flow rate method for moisture sensitive materials and an evaluation of the uncertainties in melt flow rate measurement. NPL Report. MAT 3

Rides, M; Allen, C R G; Chakravorty, S (1999) Intercomparison of extensional flow characterization techniques for polymer melts: tensile stretching and converging flow methods. NPL Report. CMMT(A)171

Rides, M; Allen, C R G; Dawson, A (2001) Improved testing using the melt flow rate instrument - multi-rate and extensional flow measurements. NPL Report. MATC(A)28

Rides, M; Allen, C R G; Dawson, A (2002) Multi-rate and extensional flow measurements using the melt flow rate instrument. Measurement Good Practice Guide. 61

Rides, M; Allen, C R G; Fleming, D*; Haworth, B*; Kelly, A* (2008) Intercomparison of slip flow velocity measurements of filled polymers by capillary extrusion rheometry. Polym. Test., 27. pp. 308-320.

Rides, M; Allen, C R G; Omloo, H*; Nakayama, K*; Cancelli, G* (2008) Melt flow rate testing of moisture sensitive plastics. In: Proceedings of the Polymer Processing Society 24th Annual Meeting - PPS-24, 15-19 June 2008, Salerno, Italy.

Rides, M; Allen, C R G; Yan, F* (2007) Experimental evaluation of a piezoelectric cantilever for characterising the rheological properties of fluids. In: AERC 2007 4th Annual European Rheology Conference, 12-14 April 2007, Napolli, Italy.

Rides, M; Chakravorty, S (1997) Review of converging flow methods for determining the extensional flow behaviour of polymer melts. NPL Report. CMMT(A)80

Rides, M; Dawson, A; Allen, C R G (2002) Improved melt flow rate measurements: an industrial case study. NPL Report. MATC(MN)38

Rides, M; Farah, I A*; Davies, A R*; Thomas, K (1993) On the determination of extentional viscosity from capillary rheometer entrance pressure drop measurements using a numerical simulation of contraction flow. NPL Report. DMM(A)121

Rides, M; Kelly, A L*; Allen, C R G (2011) An investigation of high rate capillary extrusion rheometry of thermoplastics. Polym. Test., 30 (8). pp. 916-924.

Rides, M; Morikawa, J*; Hälldahl, L*; Hay, B*; Lobo, H*; Dawson, A (2008) Intercomparison of thermal conductivity and thermal diffusivity measurements of polymers. In: Proceedings of the Polymer Processing Society 24th Annual Meeting - PPS-24, 15-19 June 2008, Salerno, Italy.

Rides, M; Spitteler, P; Brown, C (2000) In-process monitoring of the flow properties of polymer melts using on-line and in-line methods. NPL Report. CMMT(MN)061

This list was generated on Tue Dec 7 17:54:34 2021 GMT.