Report/Guide

McCartney, L N; Dickinson, E J (2021) Development of consistent local thermodynamic relations for non-equilibrium multi-component fluid systems. NPL Report. MAT 98

Dean, G D; McCartney, L N; Crocker, L E; Mera, R D (2009) Modelling the long-term deformation behaviour of polymers for finite element analysis. NPL Report. MAT 31

McCartney, L N; Clay, K* (2009) Rigorous analysis for estimating the orientation of cubic crystals. NPL Report. MAT 30

Dean, G D; McCartney, L N; Crocker, L E; Mera, R D (2008) Modelling the long-term deformation behaviour of polymers for finite element analysis. NPL Report. MAT 22

McCartney, L N (2004) Effect of mixed mode loading on ply crack development in laminated composites: theory and application. NPL Report. MATC(A)167

Roberts, S J; McCartney, L N (2003) New method of measuring elastic properties of coatings: part I - theoretical approach. NPL Report. MATC(A)146

Roberts, S J; McCartney, L N (2003) Predicting steady state interface debonding in a multi-layered coated system under biaxial mechanical and thermal loading. NPL Report. MATC(A)144

Roberts, S J; McCartney, L N; Wright, L (2003) Predicting steady state interface debonding in a two-layer coated system under biaxial loading and bending. NPL Report. MATC(A)143

Hunt, R A; McCartney, L N (2003) Use of models to predict deformation during the elastic-plastic nano-indentation of coatings. NPL Report. MATC(A)46

McCartney, L N; Maxwell, A S (2002) Predicting through-thickness cracking in a two-layer coated system subject to axial loading and bending. NPL Report. MATC(A)138

McCormick, N J; Gower, M R L; McCartney, L N (2002) An Internet accessible system for simulating damage in composite laminates during bending deformation. NPL Report. MATC(A)96

McCartney, L N (2001) Model of composite degradation due to environmentally assisted fatigue damage. NPL Report. MATC(A)26

McCartney, L N (2001) Simulation of progressive damage formation and failure during the loading of cross-ply composites. NPL Report. MATC(A)20

Hunt, R A; McCartney, L N (2001) Use of models to predict deformation during the elastic nano-indentation of coatings. NPL Report. MATC(A)45

Jennett, N M; McCartney, L N; Lawrence, K; Hunt, R; Maxwell, A; Koskinen, J*; Meneve, J*; Wegener, W*; Gibson, N*; Zhihui Xu*,; Bushby, A J*; Chudoba, T*; Cavaleiro, A*; Herrmann, K*; Consiglio, R*; Augereau, F*; Schneider, D* (2001) Indicoat Final Report Determination of hardness and modulus of thin films and coatings by nanoindentation. NPL Report. MATC(A)24

McCartney, L N (1999) Simulation of progressive fibre failure during the tensile loading of unidirectional composites. NPL Report. CMMT(A)212

McCartney, L N; McCormick, N J; Lawrence, K M (1999) A new model of fatigue creep deformation. NPL Report. CMMT(A)161

McCartney, L N (1999) Model of composite degradation due to fatigue damage. NPL Report. CMMT(A)211

Hunt, R A; Pierse, C; McCartney, L N (1998) A theoretical approach to the indentation of layered materials. NPL Report. CMMT(A)71

McCartney, L N (1998) Model of composite degradation due to environmental damge. NPL Report. CMMT(A)124

Lodeiro, M J; Maudgal, S; McCartney, L N; Morrell, R; Roebuck, B (1998) Critical review of interface testing methods for composites. NPL Report. CMMT(A)101

Broughton, W R; McCartney, L N (1998) Predictive models for assessing long-term performance of polymer matrix composites. NPL Report. CMMT(A)95

McCartney, L N (1997) Design guide for predicting composite properties. part i: description of methodology. NPL Report. CMMT(A)79

McCartney, L N (1997) Predicting steady state delamination in a cross-ply laminate subject to through-thickness pressure. NPL Report. CMMT(A)65

McCartney, L N; Pierse, C (1997) Stress transfer mechanics for multiple ply laminates subject to bending. NPL Report. CMMT(A)55

McCartney, L N (1997) validation of models to predict thermal expansion of fibre reinforced metal matrix composites. NPL Report. CMMT(MN)003

McCartney, L N (1996) Generalised framework for the prediction of ply cracking in any symmetric laminate subject to general in-plane loading. NPL Report. CMMT(A)51

McCartney, L N (1996) Stress transfer mechanics for ply cracks in general symmetric laminates. NPL Report. CMMT(A)50

McCartney, L N (1996) Validation of models for the prediction of the thermal expansion coefficients for fibre reinforced titanium composites. NPL Report. CMMT(A)56

McCartney, L N; Saunderson, S E T* (1995) A recursive method of calculating stress transfer in multiple-ply laminates subject to biaxial loading, I: development of model. NPL Report. DMM(A)150

Roebuck, B; Lord, J D; McCartney, L N (1995) Validation of a draft tensile testing standard for discontinuously reinforced MMC. Technical Report.

Roebuck, B; Lord, J D; McCartney, L N (1995) Validation of a draft tensile testing standard for discontinuously reinforced MMC. VAMAS and UK MMC FORUM intercomparisons. NPL Report. DMM(A)161

McCartney, L N (1994) The prediction of non-uniform cracking in biaxially loaded cross-ply laminates. NPL Report. DMM(A)142

McCartney, L N (1993) Stress transfer mechanics for multiple perfectly bonded concentric cylinder models of unidirectional composites. NPL Report. DMM(A)129

Roebuck, B; McCartney, L N; Cooper, P M; Bennett, E G; Orkney, L P (1992) UK interlaboratory tensile tests on Al alloy/SiC pariculate metal matrix composites. NPL Report. DMM(A)77

Article

Breite, C; Melnikov, A; Turon, A; de Morais, A B; Le Bourlot, C; Maire, E; Schoberl, E; Otero, F; Mesquita, F; Sinclair, I; Costa, J; Mayugo, J A; Guerrero, J M; Gorbatikh, L; McCartney, L N; Hajikazemi, M; Mehdikhani, M; Mavrogordato, M N; Camanho, P P; Tavares, R; Spearing, S M; Lomov, S V; Pimenta, S; Van Paepegem, W; Swolfs, Y (2022) Detailed experimental validation and benchmarking of six models for longitudinal tensile failure of unidirectional composites. Composite Structures, 279. 114828

McCartney, L N; Crocker, L E; Wright, L (2019) Verification of a 3D analytical model of multilayered piezoelectric systems using finite element analysis. Journal of Applied Physics, 125 (18). 184503 ISSN 0021-8979

Stewart, M; Lepadatu, S; McCartney, L N; Cain, M G; Wright, L; Crain, J; Newns, D M*; Martyna, G J* (2015) Electrode size and boundary condition independent measurement of the effective piezoelectric coefficient of thin films. APL Mater., 3 (2). 026103

McCartney, L N; Wright, L; Cain, M G; Crain, J; Martyna, G J*; Newns, D M* (2014) Methods for determining piezoelectric properties of thin epitaxial films: theoretical foundations. J. Appl. Phys., 116 (1). 014104

McCartney, L N (2013) Analytical model for sliding interfaces associated with fibre fractures or matrix cracks. Comp. Mater. Continua, 35 (3). pp. 183-227.

McCartney, L N (2013) Analytical models for sliding interfaces associated with fibre fractures or matrix cracks. CMC - Comput. Mater. Cont., 35 (3). pp. 183-227.

McCartney, L N (2013) Derivations of energy-based modelling for ply cracking in general symmetric laminates. J. Compos. Mater., 47 (20-21). pp. 2641-2673.

McCartney, L N (2013) Energy methods for modelling damage in laminates. J. Compos. Mater., 47 (20-21). pp. 2613-2640.

Saavedra, M S; Sims, G D; McCartney, L N; Stolojan, V*; Anguita, J V*; Tan, Y Y*; Ogin, S L*; Smith, P A*; Silva, S R P* (2012) Catalysing the production of multiple arm carbon octopi nanostructures. Carbon, 50 (6). pp. 2141-2146.

McCartney, L N; Blazquez, A*; Paris, F* (2012) Energy-based delamination theory for biaxial loading in the presence of thermal stresses. Comp. Sci. Technol., 72 (14). pp. 1753-1766.

Dean, G D; McCartney, L N; Mera, R D; Urquhart, J M (2011) Modelling non-linear viscoelasticity in polymers for design using finite element analysis. Polym. Eng. Sci., 51 (11). pp. 2210-2219.

Roberts, S J*; McCartney, L N; Broughton, W R (2011) A novel method of determining residual stress distributions in plates using the incremental slitting technique. J. Strain Anal. Eng. Design, 46 (4). pp. 280-297.

Paris, F*; Blazquez, A*; McCartney, L N; Mantic, V* (2010) Characterization and evolution of matrix and interface related damage in [0/90]S laminates under tension. Part I: Numerical predictions. Comp. Sci. Technol., 70 (7). pp. 1168-1175.

Paris, F*; Blazquez, A*; McCartney, L N; Barroso, A* (2010) Characterization and evolution of matrix and interface related damage in [0/90]S laminates under tension. Part II: Experimental evidence. Comp. Sci. Technol., 70 (7). pp. 1176-1183.

McCartney, L N (2010) Maxwell's far-field methodology predicting elastic properties of multi-phase composites reinforced with aligned transverse isotropic spheroids. Philos. Mag., 90 (31-32). pp. 4175-4207.

Wooldridge, J; Blackburn, J F; McCartney, L N; Stewart, M; Weaver, P M; Cain, M G (2010) Small-scale piezoelectric devices: Pyroelectric contributions to the piezoelectric response. J. Appl. Phys., 107 (10). 104118

McCartney, L N; Clegg, W J*; Mortenson, A*; Smith, P A* (2010) A collection of papers on materials science to celebrate the 80th birthday of Professor Anthony Kelly, CBE, FRS. Philos. Mag., 90 (31-32). pp. 4075-4080.

Blazquez, A*; Mantic, V*; Paris, F*; McCartney, L N (2009) BEM analysis of damage progress in 0/90 laminates. Eng. Anal. Bound. Elem., 33 (6). pp. 762-769.

Dean, G D; McCartney, L N; Crocker, L E; Mera, R D (2009) Modelling the long-term deformation behaviour of polymers for finite element analysis. Plast. Rubber Compos., 38 (9-10). pp. 433-443.

McCartney, L N (2008) Energy methods for fatigue damage modelling of laminates. Comp. Sci. Technol., 68 (13). pp. 2601-2615.

Vopsaroiu, M; Stewart, M; Hegarty, T; Muniz-Piniella, A; McCartney, L N; Cain, M G; Srinivasan, G* (2008) Experimental determination of the magneto-electric coupling coefficient via piezo-electric measurements. Meas. Sci. Technol., 19. 045106

McCartney, L N; Kelly, A* (2008) Maxwell's far-field methodology applied to the prediction of properties of multi-phase isotropic particulate composites. Proc. R. Soc. Lond. A, 464 (2090). pp. 423-446.

Blazquez, A*; Mantic, V*; Paris, F*; McCartney, L N (2008) Stress state characterization of delamination cracks in [0/90] symmetric laminates by BEM. Int. J. Solids Struct., 45 (6). pp. 1632-1662.

Busso, E P*; Evans, H E*; Wright, L; Nunn, J; McCartney, L N; Osgerby, S* (2008) A software tool for lifetime prediction of thermal barrier coating systems. Mater. Corros., 59 (7). pp. 556-565.

Busso, E P*; Evans, H E*; Wright, L; McCartney, L N; Nunn, J; Osgerby, S* (2008) A software tool for lifetime prediction of thermal barrier coating systems. Mater. Corros., 59 (7). pp. 556-565.

McCartney, L N; Kelly, A* (2007) Effective thermal and elastic properties of [+theta /-theta ]s laminates. Comp. Sci. Technol., 67. pp. 646-661.

Busso, E P*; Wright, L; Evans, H E*; McCartney, L N; Saunders, S R J; Osgerby, S; Nunn, J (2007) A physics-based life prediction methodology for thermal barrier coating systems. Acta. Mater., 55. pp. 1491-1503.

Saunders, S R J; McCartney, L N (2006) Current understanding of steam oxidation - power plant and laboratory experience. Mater. Sci. Forum, 522-52. pp. 119-128.

Palaniappan, J*; Wang, H*; Ogin, S L*; Thorne, A*; Reed, G T*; Tjin, S C*; McCartney, L N (2006) Prediction of the reflected spectra from chirped fibre Bragg gratings embedded within cracked crossply laminates. Meas. Sci. Technol., 17. pp. 1609-1614.

Kelly, A*; McCartney, L N; Clegg, W J*; Stearn, R J* (2005) Controlling thermal expansion to obtain negative expansivity using laminated composites. Comp. Sci. Technol., 65. pp. 47-59.

McCartney, L N (2005) Energy-based prediction of failure in general symmetric laminates. Eng. Fract. Mech., 72. pp. 909-930.

McCartney, L N (2005) Energy-based prediction of progressive ply cracking and strength of general symmetric laminates using an homogenisation method. Compos. A, Appl. Sci. Manuf., 36. pp. 119-128.

Katerelos, D G*; McCartney, L N; Galiotis, C* (2005) Local strain re-distribution and stiffness degradation cross-ply polymer composites under tension. Acta. Mater., 53. pp. 3335-3343.

Katerelos, D G*; McCartney, L N; Galiotis, C* (2005) Local strain re-distribution and stiffness degradation in cross-ply polymer composites under tension. Acta. Mater., 53. pp. 3335-3343.

McCartney, L N (2005) Modelling scale failure in tension (fracture and spallation). Mater. High Temp., 22 (1-2). pp. 167-177.

McCartney, L N (2005) Modelling scale failure in tension (fracture and spallation). Mater. High Temp., 22 (1-2). pp. 167-177.

McCartney, L N (2005) Prediction of dislocation formation in epitaxial multilayers subject to in-plane loading. Philos. Mag., 85 (15). pp. 1575-1610.

McCartney, L N (2005) Prediction of dislocation formation in epitaxial multilayers subject to in-plane loading. Philos. Mag., 85 (15). pp. 1575-1610.

McCartney, L N (2003) Physically based damage models for laminated composites. I Mech. E. J. of Materials: Design & Applications, 217. pp. 163-199.

McCartney, L N; Schoeppner, G A* (2002) Predicting the effect of non-uniform ply cracking on the thermoelastic properties of cross-ply laminates. Comp. Sci. Technol., 62. pp. 1841-1856.

McCartney, L N (2002) Prediction of ply cracking formation and failure in laminates. Comp. Sci. Technol., 62. pp. 1619-1631.

Roebuck, B; Gee, M G; Lord, J D; McCartney, L N (1998) Miniature thermal cycling tests on aluminium alloy metal matrix composites. Mater. Sci. Technol., 14 (Sept -). pp. 1001-1008.

McCartney, L N (1998) Predicting transverse crack formation in cross-ply laminates. Comp. Sci. Technol., 58 (7). pp. 1068-1081.

McCartney, L N (1997) Predicting non-linear behaviour in multiple-ply, cross-ply laminates resulting from micro-cracking. Solid Mechanics and its Applications, 49. pp. 379-390.

McCartney, L N (1996) Stress transfer mechanics: models that should be the basis of life prediction methodology. ASTM STP- 'Life prediction methodology for Titanium Matrix Composites', 1253. pp. 85-113.

Roebuck, B; Lord, J D; Cooper, P M; McCartney, L N (1994) Data acquistion and analysis of tensile properties for metal matrix composites. J. Test. Eval., 22 (1). pp. 63-69.

McCartney, L N (1993) Analytical micromechanical models for the prediction of multiple cracking in composites. J. Phys. IV Colloq., 3 (C7). pp. 1637-1646.

Morrell, R; McCartney, L N (1993) Measurement of properties of brittle matrix composites. Br. Ceram. Trans. J., 92 (1). pp. 1-7.

McCartney, L N (1993) The prediction of cracking in biaxially loaded cross-ply laminates having brittle matrices. Composites, 24 (2). pp. 84-92.

McCartney, L N (1992) Mechanics for the growth of bridge cracks in composite materials II. Applications. J. Compos. Technol. Res., 14 (3). pp. 147-154.

McCartney, L N (1992) Mechanics for the growth of bridged cracks in composite materials I. Basic principles. J. Compos. Technol. Res., 14 (3). pp. 133-146.

Conference or Workshop Item

McCartney, L N (2008) Approximate method of predicting ply crack formation in general symmetric laminates subject to biaxial loading and bending. In: 13th European Conference on Composite Materials (ECCM-13), 2-5 June 2008, Stockholm, Sweden.

McCartney, L N (1997) Prediction of ply cracking in general symmetric laminates. In: Proc. 4th International conference on Deformation and Fracture of Composites, March 1997, Manchester.

McCartney, L N (1997) Should composite micro-mechanics be used in design? In: Proc. 4th International Conference on Composite Engineering, July 1997, Hawaii, USA.

McCartney, L N; Pierse, C (1997) Stress transfer mechanics for multiple ply laminates for axial loading and bending. In: Proc. 11th International Conference on Composite Materials, July 1997, Gold Coast, Australia.

McCartney, L N (1996) Stress transfer mechanics for angle-ply laminates. In: ECCM-7 7th European Conference on Composite Materials, 14 - 16 May 1996, London, UK.

McCartney, L N; Hannaby, S A; Cooper, P M (1995) Effects of cracking in multi-ply cross-ply laminates. In: Proc. 3rd Int. Conf. Deformation and fracture of composites, March 1995, University of Surrey.

McCartney, L N (1995) Interaction of transverse cracks of finite size in a cross-ply laminate. In: Proc. 10th International conference on Composite Materials, 14-18 August 1995, Whistler, B.C., Canada.

Book Chapter/Section

McCartney, L N (1995) Prediction of microcracking in composite materials. In: Cherepanov, G P, ed., Fracture: a topical encyclopaedia of current knowledge dedicated to Alan Arnold Griffith. Melbourne. USA: Krieger Publishing Co., pp. 905-916.