Report/Guide

Claverley, J D; Leach, R K (2010) Investigation into the fixturing techniques used by the project partners in the EUMINAfab consortium. NPL Report. ENG 28

Claverley, J D; Coupland, J M*; Leach, R K (2010) Measurement of the form and layer thickness of the target spheres for inertial confinement fusion. NPL Report. ENG 26

Article

Wood, S; O'Connor, D; Jones, C W; Claverley, J D; Blakesley, J C; Giusca, C; Castro, F A (2017) Transient photocurrent and photovoltage mapping for characterization of defects in organic photovoltaics. Sol. Energy Mater. Sol. Cells, 161. pp. 89-95.

Godden, T M*; Muniz-Piniella, A; Claverley, J D; Yacoot, A; Humphry, M J* (2016) A phase calibration target for quantitative phase imaging with ptychography. Opt. Express, 24 (7). pp. 7679-7692.

Sun, W J; Claverley, J D (2015) Verification of an optical micro-CMM using the focus variation technique: aspects of probing errors. CIRP Ann. - Manuf. Technol., 64 (1). pp. 511-514.

Claverley, J D; Leach, R K (2015) A review of the existing performance verification infrastructure for micro-CMMs. Precision Eng., 39. pp. 1-15.

Giusca, C L; Claverley, J D; Sun, W J; Leach, R K; Helmli, F*; Chavigner, M P J* (2014) Practical estimation of measurement noise and flatness deviation on focus variation microscopes. CIRP Ann. - Manuf. Technol., 63 (1). pp. 545-548.

Sheu, D Y*; Claverley, J D; Leach, R K (2014) Testing the mechanical characteristics and contacting behavior of novel manufactured and assembled sphere-tipped styli for micro-CMM probes. IFIP Advances in Information and Communication Technology, 435. pp. 15-21.

Claverley, J D; Leach, R K (2013) Development of a three-dimensional vibrating tactile probe for miniature CMMs. Precision Eng., 37 (2). pp. 491-499.

Leach, R K; Claverley, J D; Giusca, C; Jones, C W; Nimishakavi, L P; Sun, W; Tedaldi, M; Yacoot, A (2012) Advances in engineering nanometrology at the National Physical Laboratory. Meas. Sci. Technol., 23 (7). 074002

Meyer, P*; Claverley, J D; Leach, R K (2012) Quality control for deep x-ray lithography (LIGA): a preliminary metrology study. Microsyst. Technol., 18 (4). pp. 415-421.

Claverley, J D; Leach, R K (2010) A vibrating micro-scale CMM probe for measuring high aspect ratio structures. Microsyst. Technol., 16 (8-9). pp. 1507-1512.

Conference or Workshop Item

Hiersemenzel. F*,; Claverley, J D; Singh, J*; Petzing, J N*; Helmli, F*; Leach, R K (2013) ISO compliant reference artefacts for the verification of focus variation-based optical micro-coordinate measuring machines. In: Proceedings of the 13th euspen International Conference, 27-31 May 2013, Berlin, Germany.

Hiersemenzel, F*; Singh, J*; Petzing, J N*; Claverley, J D; Leach, R K; Helmli, F* (2013) Development of a traceable performance verification route for optical micro-CMMs. In: Laser Metrology and Machine Performance X (LAMDAMAP 2013), 20-21 March 2013, Chichley, UK.

Claverley, J D; Leach, R K (2013) Three-dimensional characterisation of a novel vibrating tactile probe for miniature CMMs. In: Laser Metrology and Machine Performance X (LAMDAMAP 2013), 20-21 March 2013, Chicheley, UK.

Claverley, J D; Burisch, A*; Leach, R K; Raatz, A* (2012) Semi-automated assembly of a MEMS-based micro-scale CMM probe and future optimization of the process chain with a view to desktop factory automation. In: Precision Assembly Technologies and Systems 6th IFIP WG 5.5 International Precision Assembly Seminar, IPAS 2012,, 12-14 February 2012, Chamonix, France.

Claverley, J D; Sheu, D-Y*; Burisch, A*; Leach, R K; Raatz, A* (2011) Assembly of a novel MEMS-based 3D vibrating micro-scale co-ordinate measuring machine probe using desktop factory automation. In: IEEE International Symposium on Assembly and Manufacturing (ISAM) 2011, 25-27 May 2011.

Meyer, P*; Claverley, J D; Kaiser, K*; Mohr, J*; Leach, R K (2011) Comparison of dimensional measurements of microparts made using deep x-ray lithography (LIGA): first results. In: 11th International Conference of the European Society for Prescision Engineering and Nanotechnology (euspen 2011), 23-27 May 2011, Lake Como, Italy.

Claverley, J D; Leach, R K (2010) Micro-scale co-ordinate metrology at the National Physical Laboratory. In: 36th International MATADOR Conference, 14 - 16 July 2010, Manchester, UK.

Claverley, J D; Georgi, A*; Leach, R K (2010) Modelling the interaction forces between an ideal measurement surface and the stylus tip of a novel vibrating micro-scale CMM probe. In: 5th International Precision Assembly Seminar (IPAS 2010), February 2010, Chamonix, France.

Smale, D*; Haley, S*; Segal, J*; Ronaldo, R*; Ratchev, S*; Leach, R K; Claverley, J D (2010) Utilisation of FIB/SEM technology in the assembly of an innovative micro-CMM probe. In: 5th International Precision Assembly Seminar (IPAS 2010), February 2010, Chamonix, France.

Claverley, J D; Leach, R K (2010) A novel three-axis vibrating micro-CMM probe with isotropic probing forces. In: Proceedings of the 10th International Conference of the European Society for Precision Engineering & Nanotechnology (euspen), 31 May - 4 June 2010, Delft, Netherlands.

Smale, D*; Ratchev, S*; Segal, J*; Leach, R K; Claverley, J D (2009) Assembly of the stem and tip of an innovative micro-CMM probe. In: 9th International Conference and Exhibition on Laser Meterology, Machine Tool, CMM and Robotic Performance (LAMDAMAP 2009), 2009.