Murawski, J; Scott, S B; Rao, R; Rigg, K; Zalities, C; Stevens, J; Sharman, J; Hinds, G; Stephens, I E L (2024) Benchmarking stability of iridium oxide in acidic media under oxygen evolution conditions: a review part 1. Johnson Matthey Technology Review, 68 (1). pp. 121-146.

Kairy, S; Zhou, S; Turnbull, A; Hinds, G (2023) Corrosion of pipeline steel in dense phase CO2 containing impurities: A critical review of test methodologies. Corrosion Science, 214. 110986

Marinov, A D; Priegue, L B; Shah, A R; Miller, T S; Howard, C A; Hinds, G; Shearing, P R; Cullen, P L; Brett, D J L (2023) Ex Situ Characterisation of 1T/2H MoS2 and their Carbon Composites for Energy Applications: a Review. ACS Nano, 17 (6). pp. 5163-5186.

Valdes-Lopez, V F; Castanheira, L; Hinds, G; Bacquart, T; Cho, J I S; Mason, T; Shearing, P R; Brett, D J L (2023) Evolution and distribution of the anode overpotential and its oscillations in a polymer electrolyte membrane fuel cell exposed to carbon monoxide. International Journal of Hydrogen Energy, 48 (3). pp. 1146-1159.

Marchesini, S; Reed, B P; Jones, H; Matjacic, L; Rosser, T E; Zhou, Y; Brennan, B; Tiddia, M; Jervis, R; Loveridge, M J; Raccichini, R; Park, J; Wain, A J; Hinds, G; Gilmore, I S; Shard, A G; Pollard, A P (2022) Surface Analysis of Pristine and Cycled NMC/Graphite Lithium-Ion Battery Electrodes: Addressing the Measurement Challenges. ACS Applied Materials & Interfaces, 14 (47). pp. 52779-52793.

Chen, H S; Dickinson, E J F; Heins, T P; Park, J; Gaberscek, M; Lee, Y Y; Heinrich, M; Ruiz, V; Napolitano, E; Kauranen, P; Fedorovskaya, E; Moskon, J; Kallio, T; Mousavihashemi, S; Krewer, U; Hinds, G; Seitz, S (2022) Comparison of methodologies to estimate state-of-health of commercial Li-ion cells from electrochemical frequency response data. Journal of Power Sources, 542. 231814

Radhakrishnan, A N P; Buckwell, M; Pham, M; Finegan, D P; Rack, A; Hinds, G; Brett, D J L; Shearing, P R (2022) Quantitative spatiotemporal mapping of thermal runaway propagation rates in lithium-ion cells using cross-correlated Gabor filtering. Energy & Environmental Science, 15 (8). pp. 3503-3518.

Becker, H; Dickinson, E J F; Lu, X K; Bexell, U; Proch, S; Moffatt, C; Stenstrom, M; Smith, G; Hinds, G (2022) Assessing potential profiles in water electrolysers to minimise titanium use. Energy & Environmental Science, 15 (6). pp. 2508-2518.

Maslan, S; Hinds, G; Ouameur, M; Overney, F (2022) Project LiBforSecUse: Quality Assessment of Electric Vehicle Lithium Ion Batteries for Second Use Applications. Cal Lab: The International Journal of Metrology, 29 (2). pp. 22-31.

Sharp, M; Darst, J J; Hughes, P; Billman, J; Pham, M; Petrushenko, D; Heenan, T M M; Jervis, R; Owen, R; Petal, D; Du, W; Michael, H; Rack, A; Magdysyuk, O V; Connolley, T; Brett, D J L; Hinds, G; Keyser, M; Darcy, E; Shearing, P R; Walker, W; Finegan, D P (2022) Thermal runaway of Li-ion cells: how internal dynamics, mass ejection and heat vary with cell geometry and abuse type. Journal of The Electrochemical Society, 169 (2). 020526

Maier, M; Smith, K; Dodwell, J; Hinds, G; Shearing, P R; Brett, D J L (2022) Mass transport in PEM water electrolysers: A review. International Journal of Hydrogen Energy, 47 (1). pp. 30-56.

Rosser, T E; Dickinson, E J F; Raccichini, R; Hunter, K; Searle, A D; Kavanagh, C M; Curran, P J; Hinds, G; Park, J; Wain, A J (2021) Improved Operando Raman Cell Configuration for Commercially-Sourced Electrodes in Alkali-Ion Batteries. Journal of The Electrochemical Society, 168 (7). 070541

Dodwell, J; Maier, M; Majasan, J; Jervis, R; Castanheira, L; Shearing, P; Hinds, G; Brett, D J L (2021) Open-circuit dissolution of platinum from the cathode in polymer electrolyte membrane water electrolysers. Journal of Power Sources, 498. 229937

Pham, M T M; Darst, J J; Walker, W Q; Heenan, T M M; Patel, D; Iacoviello, F; Rack, A; Olbinado, M P; Hinds, G; Brett, D J L; Darcy, E; Finegan, D P; Shearing, P R (2021) Prevention of lithium-ion battery thermal runaway using polymer-substrate current collectors. Cell Reports Physical Science, 2 (3). 100360

Lu, X; Daemi, S R; Bertei, A; Kok, M D R; O’Regan, K B; Rasha, L; Park, J; Hinds, G; Kendrick, E; Brett, D J L; Shearing, P R (2020) Microstructural Evolution of Battery Electrodes During Calendering. Joule, 4 (12). pp. 2746-2768. ISSN 25424351

Pham, M T M; Darst, J J; Finegan, D P; Robinson, J B; Heenan, T M M; Kok, M D R; Iacoviello, F; Owen, R; Walker, W Q; Magdysyuk, O V; Connolley, T; Darcy, E; Hinds, G; Brett, D J L; Shearing, P R (2020) Correlative acoustic time-of-flight spectroscopy and X-ray imaging to investigate gas-induced delamination in lithium-ion pouch cells during thermal runaway. Journal of Power Sources, 470. 228039 ISSN 03787753

Hesketh, J; Dickinson, E J F; Turnbull, A; Hinds, G (2020) Influence of H2S on the localised corrosion of 316L stainless steel Part 2 - Electrochemical testing. NPL Report. National Physical Laboratory. MAT 94

Hesketh, J; Dickinson, E J F; McMahon, G; Martin, M; Turnbull, A; Hinds, G (2020) Influence of H2S on the localised corrosion of 316L stainless steel: Part 1 - Coupon testing. NPL Report. National Physical Laboratory. MAT 92

Lu, X; Bertei, A; Finegan, D P; Tan, C; Daemi, S R; Weaving, J S; O’Regan, K B; Heenan, T M M; Hinds, G; Kendrick, E; Brett, D J L; Shearing, P R (2020) 3D microstructure design of lithium-ion battery electrodes assisted by X-ray nano-computed tomography and modelling. Nature Communications, 11 (1). 2079 ISSN 2041-1723

Becker, H; Castanheira, L; Hinds, G (2020) Local measurement of current collector potential in a polymer electrolyte membrane water electrolyser. Journal of Power Sources, 448. 227563 ISSN 03787753

Tiller, A K; Munn, P; Turnbull, A; Hinds, G (2020) Avoidance of corrosion in plumbing systems (Guides to Good Practice in Corrosion Control No. 8). Other.

Francis, R; Turnbull, A; Hinds, G (2020) Bimetallic Corrosion (Guides for Good Practice in Corrosion Control No. 5). Other.

Harvey, D W; Turnbull, A; Hinds, G (2020) Corrosion control for buried pipelines (Guides to Good Practice in Corrosion Control No.4). Other.

Francis, R; Turnbull, A; Hinds, G (2020) Corrosion control for pumps and valves (Guides to Good Practice in Corrosion Control No. 6). Other.

Robinson, J B; Owen, R E; Kok, M D R; Maier, M; Majasan, J; Braglia, M; Stocker, R; Amietszajew, T; Roberts, A J; Bhagat, R; Billsson, D; Olson, J Z; Park, J; Hinds, G; Ahlberg Tidblad, A; Brett, D J L; Shearing, P R (2020) Identifying Defects in Li-Ion Cells Using Ultrasound Acoustic Measurements. Journal of The Electrochemical Society, 167 (12). 120530 ISSN 1945-7111

Rogers, R; Morgan, P; Turnbull, A; Hinds, G (2020) Temporary Corrosion Protection (Guides to Good Practice in Corrosion Control No. 7). Other.

Meddings, N; Heinrich, M; Overney, F; Lee, J S; Ruiz, V; Napolitano, E; Seitz, S; Hinds, G; Raccichini, R; Gaberšček, M; Park, J (2020) Application of electrochemical impedance spectroscopy to commercial Li-ion cells: A review. Journal of Power Sources, 480. 228742 ISSN 03787753

Lyu, C; Song, Y K; Zheng, J; Luo, W L; Hinds, G; Li, J F; Wang, L X (2019) In situ monitoring of lithium-ion battery degradation using an electrochemical model. Applied Energy, 250. pp. 685-696. ISSN 03062619

Hesketh, J; Hinds, G; Turnbull, A (2019) Sour Testing of 316L Stainless Steel: Comparison of Four-Point Bend and Uniaxial Tensile Test Methods. CORROSION, 75 (7). pp. 779-789. ISSN 0010-9312

Dickinson, E J F; Hinds, G (2019) The Butler-Volmer Equation for Polymer Electrolyte Membrane Fuel Cell (PEMFC) Electrode Kinetics: A Critical Discussion. Journal of The Electrochemical Society, 166 (4). pp. F221-F231. ISSN 0013-4651

Lyu, C; Zheng, J; Luo, W; Hinds, G; Wu, G; Li, J; Wang, L (2018) In Situ Monitoring of Lithium-ion Battery Degradation Using An Electrochemical Model. In: 2018 International Conference on Energy, Ecology and Environment (ICEEE 2018), 21-25 November 2019, Melbourne, Australia.

Rabissi, C; Brightman, E; Hinds, G; Casalegno, A (2018) In operando measurement of localised cathode potential to mitigate DMFC temporary degradation. International Journal of Hydrogen Energy, 43 (20). pp. 9797-9802.

Engebretsen, E; Hinds, G; Meyer, Q; Mason, T; Brightman, E; Castanheira, L; Shearing, P R; Brett, D J L (2018) Localised electrochemical impedance measurements of a polymer electrolyte fuel cell using a reference electrode array to give cathode-specific measurements and examine membrane hydration dynamics. Journal of Power Sources, 382. pp. 38-44. ISSN 03787753

Hesketh, J; Hinds, G; Morana, R (2018) effect of pigging damage on sulfide stress corrosion cracking of type 316L stainless steel cladding. Corrosion, 74 (4). pp. 487-495.

Finegan, D P; Darcy, E; Keyser, M; Tjaden, B; Heenan, T M M; Jervis, R; Bailey, J J; Vo, N T; Magdysyuk, O V; Drakopoulos, M; Di Michiel, M; Rack, A; Hinds, G; Brett, D J L; Shearing, P R (2018) Identifying the Cause of Rupture of Li-Ion Batteries during Thermal Runaway. Advanced Science, 5 (1). 1700369 ISSN 21983844

Finegan, D P; Tjaden, B; Heenan, T M M; Jervis, R; Di Michiel, M; Rack, A; Hinds, G; Brett, D J L; Shearing, P R (2017) Tracking internal temperature and structural dynamics during nail penetration of lithium-ion cells. Journal of the Electrochemical Society, 163 (13). pp. A3285-A3291.

Finegan, D P*; Darcy, E*; Keyser, M*; Tjaden, B*; Heenan, T M M*; Jervis, R*; Bailey, J J*; Malik, R*; Vo, N T*; Magdysyuk, O V*; Atwood, R*; Drakopoulos, M*; DiMichiel, M*; Rack, A*; Hinds, G; Brett, D J L*; Shearing, P R* (2017) Characterising thermal runaway within lithium-ion cells by inducing and monitoring internal short circuits. Energy Environ. Sci., 10 (6). pp. 1377-1388.

Ferreira-Aparicio, P*; Chaparro, A M*; Folgado, M A*; Conde, J J*; Brightman, E; Hinds, G (2017) Degradation study by start-up/shut-down cycling of superhydrophobic electrosprayed catalyst layers using a localized reference electrode technique. ACS Appl. Mater. Interfaces, 9 (12). pp. 10626-10636.

Engebretsen, E*; Mason, T J*; Shearing, P R*; Hinds, G; Brett, D J L* (2017) Electrochemical pressure impedance spectroscopy applied to the study of polymer electrolyte fuel cells. Electrochem. Commun., 75. pp. 60-63.

Obeisun, O A*; Finegan, D P; Engebretsen, E; Robinson, J B*; Taiwo, O O*; Hinds, G; Shearing, P R*; Brett, D J L* (2017) Ex-situ characterisation of water droplet dynamics on the surface of a fuel cell gas diffusion layer through wettabilty. Int. J. Hydrog. Energy, 42 (7). pp. 4404-4414.

Finegan, D P*; Cooper, S J*; Tjaden, B*; Taiwo, O O*; Gelb, J*; Hinds, G; Brett, D J L*; Shearing, P R* (2016) Characterising the structural properties of polymer separators for lithium-ion batteries in 3D using phase contrast X-ray microscopy. J. Power Sources, 333. pp. 184-192.

Hesketh, J; Hinds, G; Morana, R* (2016) Effect of pigging damage on sulphide stress corrosion cracking of corrosion resistant alloys. Corrosion, 72 (3). pp. 439-448.

Engebretsen, E*; Robinson, J B*; Obeisun, O*; Mason, T*; Finegan, D*; Hinds, G; Shearing, P R*; Brett, D J L* (2016) Electro-thermal impedance spectroscopy applied to an open-cathode polymer electrolyte fuel cell. J. Power Sources, 302. pp. 210-214.

Rabissi, C*; Brightman, E; Hinds, G; Casalegno, A* (2016) In operando investigation of anode overpotential dynamics in direct methanol fuel cells. Int. J. Hydrog. Energy, 41 (40). pp. 18221-18225.

Finegan, D P*; Scheel, M*; Robinson, J B*; Tjaden, B*; Di Michiel, M*; Hinds, G; Brett, D J L*; Shearing, P R* (2016) Investigating lithium-ion battery materials during overcharge-induced thermal runaway: an operando and multi-scale X-ray CT study. Phys. Chem. Chem. Phys., 18 (45). pp. 30912-30919.

Wickstrom, L; Mingard, K P; Hinds, G; Turnbull, A (2016) Microcrack clustering in stress corrosion cracking of 22Cr and 25Cr duplex stainless steels. Corros. Sci., 109. pp. 86-93.

Abda, J; Davies, H; Hinds, G; Turnbull, A (2016) Novel approach to validation of thermodynamic models for the chemistry of oilfield environments. Corrosion, 72 (5). pp. 587-597.

Zago, M*; Bisello, A*; Baricci, A*; Rabissi, C*; Brightman, E; Hinds, G; Casalengno, A* (2016) On the actual mixed potential in direct methanol fuel cells. J. Power Sources, 325. pp. 714-722.

Finegan, D P*; Tudisco, E*; Scheel, M*; Robinson, J B*; Taiwo, O O*; Eastwood, D S*; Lee, P D*; Di Michiel, M*; Bay, B*; Hall, S A*; Hinds, G; Brett, D J L*; Shearing, P R* (2016) Quantifying bulk electrode strain and material displacement within lithium batteries via high-speed operando tomography and digital volume correlation. Advanced Science, 3 (3). 1500332

Chaparro, A M*; Ferreira-Aparicio, P*; Folgado, M A*; Brightman, E; Hinds, G (2016) Study of superhydrophobic electrosprayed catalyst layers using a localized reference electrode technique. J. Power Sources, 325. pp. 609-619.

Hesketh, J; Cooling, P; Hinds, G (2015) Validation of oxygen purge techniques for stress corrosion cracking tests. NPL Report. MAT 71

Robinson, J B*; Engebretsen, E*; Finegan, D P*; Darr, J*; Hinds, G; Shearing, P R*; Brett, D J L* (2015) Detection of internal defects in lithium ion batteries using lock-in thermography. ECS Electrochem. Lett., 4 (9). A106-A109

Brightman. E J,; Dodwell, J*; van Dijk, N*; Hinds, G (2015) In situ characterisation of PEM water electrolysers using a novel reference electrode. Electrochem. Commun., 52. pp. 1-4.

Finegan, D P*; Scheel, M*; Robinson, J B*; Tjaden, B*; Hunt, I*; Mason, T J*; Millichamp, J*; Di Michiel, M*; Offer, G J*; Hinds, G; Brett, D J L*; Shearing, P R* (2015) In-operando high-speed tomography of lithium-ion batteries during thermal runaway. Nature Comms., 16 (3). pp. 58-59.

Wickstrom, L; Hinds, G; Turnbull, A (2015) Influence of weld preparation procedure and heat tinting on sulfide stress corrosion cracking of duplex stainless steel. Corrosion, 71 (8). pp. 1036-1047.

Obeisun, O A*; Meyer, Q*; Engebretsen, E*; Finegan, D P*; Robinson, J B*; Hinds, G; Shearing, P R*; Brett, D J L* (2015) Study of water accumulation dynamics in the channels of an open-cathode fuel cell through electro-thermal characterisation and droplet visualisation. Int. J. Hydrog. Energy, 40 (46). pp. 16786-16796.

Hinds, G; Brightman, E (2015) Towards more representative test methods for corrosion resistance of PEMFC metallic bipolar plates. Int. J. Hydrog. Energy, 40 (6). pp. 2785-2791.

Brightman, E J; Hinds, G (2014) Feasibility study: in situ measurement of fluoride ion concentration in a polymer electrolyte membrane fuel cell. NPL Report. MAT 70

Brightman, E J; Hinds, G (2014) In situ mapping of potential transients during start-up and shut-down of a polymer electrolyte membrane fuel cell. J. Power Sources, 267. pp. 160-170.

Zhang, L*; Wang, L*; Hinds, G; Lyu, C*; Zheng, J*; Li, J* (2014) Multi-objective optimization of lithium-ion battery model using genetic algorithm approach. J. Power Sources, 270. pp. 367-378.

Robinson, J B*; Darr, J A*; Eastwood, D S*; Hinds, G; Lee, P D*; Shearing, P R*; Taiwo, O O*; Brett, D J L* (2014) Non-uniform temperature distribution in Li-ion batteries during discharge - a combined thermal imaging, X-ray micro-tomography and electrochemical impedance approach. J. Power Sources, 252. pp. 51-57.

Hinds, G; Wickstrom, L; Abda, J; Turnbull, A; Smith, V*; Woollam, R* (2014) Novel method for determination of pitting susceptibility in aggressive environments at elevated temperature and pressure. Corros. Sci., 85. pp. 33-41.

Zhang, L Q*; Lyu, C*; Hinds, G; Wang, L X*; Juo, W L*; Zheng, J*; Ma, K H* (2014) Parameter sensitivity analysis of cylindrical LiFePO4 battery performance using multi-physics modelling. J. Electrochem. Soc., 161 (5). A762-A776

Kalyvas, C*; Kucernak, A*; Brett, D*; Hinds, G; Atkins, S*; Brandon, N* (2014) Spatially resolved diagnostic methods for polymer electrolyte fuel cells - a review. Wiley Interdisciplinary Reviews - Energy and Environment, 3 (3). pp. 254-275.

Gabreab, E M*; Hinds, G; Fearn, S*; Hodgson, D*; Millichamp, J*; Shearing, P R*; Brett, D J L* (2014) An electrochemical treatment to improve corrosion and contact resistance of stainless steel bipolar plates used in polymer electrolyte fuel cells. J. Power Sources, 245. pp. 1014-1026.

Hinds, G; Wickstrom, L; Mingard, K P; Turnbull, A (2013) Impact of surface condition on sulphide stress corrosion cracking of 316L stainless steel. Corros. Sci., 71. pp. 43-52.

Hinds, G (2013) In situ diagnostics for PEM fuel cells at the National Physical Laboratory. Cells Bull., 2013 (8). pp. 12-15.

Hinds, G (2013) In situ diagnostics for PEM fuel cells at the National Physical Laboratory. Cells Bull., 2013 (8). pp. 12-15.

Hinds, G (2013) In situ mapping of electrode potential in a PEMFC. ESC Trans., 58 (1). pp. 1565-1587.

Brightman, E; Hinds, G; O'Malley, R* (2013) In situ measurement of active catalyst surface area in fuel cell stacks. J. Power Sources, 242. pp. 244-254.

Sesis, A; Hodnett, M; Memoli, G; Wain, A J; Jurewicz, I*; Dalton, A B*; Carey, J D*; Hinds, G (2013) Influence of acoustic cavitation on the controlled ultrasonic dispersion of carbon nanotubes. J. Phys. Chem. B, 117 (48). pp. 15141-15150.

Bell, S A; Hinds, G; de Podesta, M; Stevens, M; Wilkinson, J (2012) Humidity, pressure and temperature measurements in an interdigitated-flow PEM hydrogen fuel cell. Int. J. Thermophysics, 33 (8-9). pp. 1583-1594.

Hinds, G; Brightman, E (2012) In situ mapping of electrode potential in a PEM fuel cell. Electrochem. Commun., 17 (1). pp. 26-29.

Hinds, G; Turnbull, A (2010) Novel multi-electrode test method for evaluating inhibition of underdeposit corrosion. Part 1: Sweet conditions. Corrosion, 66 (4). 046001

Hinds, G; Turnbull, A (2010) Novel multi-electrode test method for evaluating inhibition of underdeposit corrosion. Part 2: Sour conditions. Corrosion, 66 (5). 056002

Brett, D J L*; Kucernak, A R*; Aguiar, P*; Atkins, P*; Brandon, N P*; Clague, R*; Cohen, L F*; Hinds, G; Kalyvas, C*; Offer, G J*; Ladewig, B*; Maher, R*; Marquis, A*; Shearing, P*; Vasileiadis, N*; Vesovic, V* (2010) What happens inside a fuel cell? Developing an experimental functional map of fuel cell performance. ChemPhysChem, 11 (13). pp. 2714-2731.

Nicholson, P G; Zhou, S; Hinds, G; Wain, A J; Turnbull, A (2009) Electrocatalytic activity mapping of model fuel cell catalyst films using scanning electrochemical microscopy. Electrochim. Acta, 54 (19). pp. 4525-4533.

Bell, S A; Hinds, G; Stevens, M; Wilkinson, J; de Podesta, M (2009) Localised relative humidity and temperature measurements in a PEM hydrogen fuel cell. In: Metrologia 09 - International Congress of Metrologia 2009, 10 March 2009, Lisbon, Portugal.

Hinds, G; Cooling, P; Wain, A J; Zhou, S; Turnbull, A (2009) Measurement of pH in concentrated brines. Corrosion, 65 (10). pp. 635-638.

Hinds, G; Stevens, M; Wilkinson, J*; de Podesta, M; Bell, S A (2009) Novel in-situ measurements of relative humidity in a polymer electrolyte membrane fuel cell. J. Power Sources, 186 (1). pp. 52-57.

Hinds, G (2008) Reference electrodes for solid polymer fuel cells: a review. NPL Report. MAT 25

Nicholson, P; Zhou, S; Hinds, G; Turnbull, A (2008) Scanning electrochemical microscopy activity mapping of model fuel cell catalyst films. NPL Report. MAT 20

Turnbull, A; Zhou, S; Nicholson, P; Hinds, G (2008) Chemistry of concentrated salts formed by evaporation of seawater on duplex stainless steel. Corrosion, 64 (4). pp. 325-333.

Hinds, G; Turnbull, A (2008) Threshold temperature for stress corrosion cracking of duplex stainless steel under evaporative seawater conditions. Corrosion, 64 (2). pp. 101-106.

Hinds, G; Cooling, P; Zhou, S; Turnbull, A (2008) Underdeposit test method for assessing performance of corrosion inhibitors. In: Eurocorr 2008, 2008.

Hinds, G (2007) Guide to durability testing of PEMFC electrocatalysts. NPL Report. DEPC-MN 049

Hinds, G; Turnbull, A (2006) Testing of supermartensitic stainless steel welds under cathodic protection at very low strain rates. Corrosion, 62 (5). pp. 371-374.

Hinds, G (2005) Preparation and characterisation of PEM fuel cell electrocatalysts: a review. NPL Report. DEPC-MPE 019

Hinds, G; Turnbull, A (2005) Does calcareous scale formation on cathodically protected steel affect hydrogen uptake? Corrosion, 61 (9). pp. 835-837.

Hinds, G; Zhao, J*; Griffiths, A J; Turnbull, A (2005) Hydrogen diffusion in super 13% chromium martensitic stainless steel. Corrosion, 61 (4). pp. 348-354.

Griffiths, A J; Hinds, G; Turnbull, A (2005) Monotonic and cyclic slow strain rate testing of super 13% chromium steel welds under cathodic protection. Corrosion, 61 (2). pp. 111-118.

Hinds, G (2004) Performance and durability of PEM fuel cells: a review. NPL Report. DEPC-MPE 002

Turnbull, A; Zhou, S; Hinds, G (2004) Stress corrosion cracking of steam turbine disc steel - measurement of the crack-tip potential. Corros. Sci., 46 (1). pp. 193-211.

Griffiths, A J; Nimmo, W; Roebuck, B; Hinds, G; Turnbull, A (2004) A novel approach to characterising the mechanical properties of super 13 Cr steel welds. Mater. Sci. Eng.A, Struct. Mater., Prop. Microstruct., Process., 384. pp. 83-91.