< back to main site

Publications

Items where Subject is "International > Metrology"

Up a level
Export as [feed] RSS
Group by: Authors | Item Type
Jump to: A | B | C | F | G | H | K | L | M | N | Q | R | S | T | W | Y
Number of items at this level: 54.

A

Allum, J; Burguete, R; Chapman, L; Fradet, L; Gleeson, K; Janssen, JT; Kerr, W; Meikle, D (2020) The Postgraduate Institute for Measurement Science. Five year review: January 2015 - December 2019. Other.

Auty, F J; Bevan, K; Hanson, A; Machin, G; Scott, J; Brown, C*; Haritos, G*; Martinez-Botas, R F* (2014) Beginner's guide to measurement in mechanical engineering. Measurement Good Practice Guide. 131

B

Bacquart, T; Murugan, A; Carré, M; Gozlan, B; Auprêtre, F; Haloua, F; Aarhaug, T A (2018) Probability of occurrence of ISO 14687-2 contaminants in hydrogen: Principles and examples from steam methane reforming and electrolysis (water and chlor-alkali) production processes model. International Journal of Hydrogen Energy, 43 (26). pp. 11872-11883. ISSN 03603199

Behnert, I D; Deadman, A J; Fox, N P; Harris, P M; Gürol, S*; Özen, H*; Bachmann, M*; Boucher, Y*; Lachérade, S* (2011) Measurement report CEOS WGCV pilot comparison of techniques and instruments used for the vicarious calibration of land surface imaging through a ground reference standard test site 2009. NPL Report. OP 5

Bennett, S; Valdes, J* (2010) Materials metrology. Metrologia, 47 (2). Foreword

Bennett, S J (2008) Citior, altior, fortior, accuratior? Metrology in Sport. Measure, 3 (4). pp. 24-28.

Bhandari, S; Croucher, D (2020) Reproducibility in research: the role of measurement science workshop. Recommendations for the infrastructure underpinning digital transformation. Other.

Brewer, P J; Brown, R J C (2020) Benchmarking the success of CCQM key comparisons for metrology institutes and their stakeholders. Metrologia, 57 (6). 065018 ISSN 0026-1394

Brown, R J C (2019) Considerations on compound SI prefixes. Measurement, 140. pp. 237-239. ISSN 02632241

Brown, R J C (2020) Evolution of the International System of Units: considering the challenge of user adoption. Metrologia, 57 (2). 023001 ISSN 0026-1394

Brown, R J C (2019) Future requirements for non-decimal unit prefixes in chemical measurement. Accreditation and Quality Assurance, 24 (3). pp. 245-247. ISSN 0949-1775

Brown, R J C (2021) Measuring measurement – What is metrology and why does it matter? Measurement, 168. 108408 ISSN 02632241

Brown, R J C (2020) Reply to “Changing the status of mmHg”. Accreditation and Quality Assurance, 25 (2). pp. 171-172. ISSN 0949-1775

Brown, R J C (2021) A metrological approach to quantities that are counted and the unit one. Metrologia, 58 (3). 035014

Brown, R J C; Andres, H (2020) How should metrology bodies treat method-defined measurands? Accreditation and Quality Assurance, 25 (2). pp. 161-166. ISSN 0949-1775

Brown, R J C; Brewer, P J (2020) What is a mole? Metrologia, 57 (6). 065002 ISSN 0026-1394

Brown, R J C; Janssen, J T (2020) Counting correctly. Accreditation and Quality Assurance, 25. pp. 387-388. ISSN 0949-1775

Brown, R J C; Janssen, JT (2021) The value of stable, comparable and standardised measurement: enabling confidence in decision making for societal challenges. Metrologia, 58 (3). 033001 ISSN 0026-1394

C

Claverley, J (2020) Technology and measurement foresighting: a vision of the 2030s shaped by metrology. Other.

F

Fennelly, C (2021) Quantifying measurement activity in the UK. NPL Report. IEA 7

Finsterle, W*; Blattner, P*; Moebus, S*; Ruedi, I*; Wehril, C*; White, M; Schmutz, W* (2008) Third comparison of the world radiometric reference and the SI radiometric scale. Metrologia, 45 (4). pp. 377-381.

Fletcher, N (2018) The Role of the Magnetic Constant, mu(0), in the Redefinition of the SI. In: 2018 Conference on Precision Electromagnetic Measurements (CPEM 2018), 8-13 July 2018, Paris, France.

Flowers, J L; Petley, B W (2010) Fundamental constants. In: Handbook of Metrology. Wiley VCH, pp. 33-74. ISBN 9783527406661

Foss, J*; Dewhurst, R*; Yacoot, A; Regtien, P*; Peters, K* (2013) Announcing the 2012 Measurement Science and Technology outstanding paper award. Meas. Sci. Technol., 24 (7). 070101

Foss, J*; Peters, K*; Yacoot, A; Jakoby, B*; McGrath, J* (2015) Announcing the 2014 Mesurement Science and Technology outstanding paper awards. Meas. Sci. Technol., 26 (7). 070202

G

Goldsmith, M (2010) A beginner's guide to measurement. Measurement Good Practice Guide. 118

Güttler, B; Bettin, H; Brown, R J C; Davis, R S; Mester, Z; Milton, M J T; Pramann, A; Rienitz, O; Vocke, R D; Wielgosz, R I (2019) Amount of substance and the mole in the SI. Metrologia, 56 (4). 044002 ISSN 0026-1394

H

Haloubi, T; Blair, J; Bagkos, D (2022) A year in the PGI (2021 edition). Other.

Haloubi, T; Blair, J; McMillan, J (2022) Impact through partnership: building future leaders and measurement expert. Other.

Hully, J; Jullien, D; Dobre, M; Filtz, J-R; Janssen, JT (2021) Special Section on the 19th International Congress of Metrology (CIM 2019). Measurement Science and Technology, 32 (3). 030101 ISSN 0957-0233

K

Kibble, B P (2012) Measurement for the future - a complete SI from physical constants. IEEE Trans. Instrum. Meas., 61 (8). pp. 2125-2131.

King, M; Renedo, E (2020) Estimating the price elasticity of demand for NPL's service. NPL Report. IEA 6

King, M; Renedo, E (2020) The impact of the National Measurement System funding on the uptake of NPL's service. NPL Report. IEA 5

King, M; Renedo, E (2020) A net present value assessment of NPL's support to UK businesses. NPL Report. IEA 4

King, M; Renedo, E; Croucher, D (2022) Review of the evaluation activities for the NMS. NPL Report. IEA 9

King, M; Tellett, G (2020) A customer survey for three of the core labs in the National Measurement System. Technical Report.

L

Lenssen, L (2021) NPL's COVID-19 response. Other.

M

Machin, G (2014) Measurement fundamentals: an introduction. Meas. Control, 47 (10). p. 301.

Martin, O C*; Muelaner, J E*; Dhokia, V*; Robson, S*; Kayani, A; Maropoulos, P G* (2016) Comparative performance between two photogrammetric systems and a reference laser tracker network for large-volume industrial measurement. Photogrammetric Record, 31 (155). pp. 348-360.

Milton, M J T (2012) Making progress in a practical discipline. Accred. Qual. Assur., 17 (2). pp. 221-222.

N

Nelson, G; Boehm, U; Bagley, S; Bajcsy, P; Bischof, J; Brown, C M; Dauphin, A; Dobbie, I M; Eriksson, J E; Faklaris, O; Fernandez-Rodriguez, J; Ferrand, A; Gelman, L; Gheisari, A; Hartmann, H; Kukat, C; Laude, A; Mitkovski, M; Munck, S; North, A J; Rasse, T M; Resch-Genger, U; Schuetz, L C; Seitz, A; Strambio-De-Castillia, C; Swedlow, J R; Alexopoulos, I; Aumayr, K; Avilov, S; Bakker, G J; Bammann, R R; Bassi, A; Beckert, H; Beer, S; Belyaev, Y; Bierwagen, J; Birngruber, K A; Bosch, M; Breitlow, J; Cameron, L A; Chalfoun, J; Chambers, J J; Chen, C E L; Conde-Sousa, E; Corbett, A D; Cordelieres, F P; Del Nery, E; Dietzel, R; Eismann, F; Fazeli, E; Felscher, A; Fried, H; Gaudreault, N; Goh, W I; Guibert, T; Hedleigh, R; Hemmerich, P; Holst, G A; Itano, M S; Jaffe, C B; Jambor, H K; Jarvis, S C; Keppler, A; Kirchenbuechler, D; Kirchner, M; Kobayashi, N; Krens, G; Kunis, S; Lacoste, J; Marcello, M; Martins, G G; Metcalf, D J; Mitchell, C A; Moore, J; Mueller, T; Nelson, M S; Ogg, S; Onami, S; Palmer, A L; Paul-Gilloteaux, P; Pimental, J A; Plantard, L; Podder, S; Rexhepaj, E; Royon, A; Saari, M A; Schapman, D; Schoonderwoert, V; Schroth-Diez, B; Schwartz, S; Shaw, M; Spitaler, M; Stoeckl, M T; Sudar, D; Teillon, J; Terjung, S; Thuenauer, R; Wilms, C D; Wright, G D; Nitschke, R (2021) QUAREP-LiMi: A community-driven initiative to establish guidelines for quality assessment and reproducibility for instruments and images in light microscopy. Journal of Microscopy, 284 (1). pp. 56-73.

Nwaigbo, N (2022) Evaluating the Impact of the NMS Innovations Projects on Supported Firms. NPL Report. IEA 10

Nwaigbo, N; King, M (2022) Using stock market data to measure the effect of EASA's amendments to regulations governing components for the aerospace sector. NPL Report. IEA 11

Q

Quincey, P (2021) Angles in the SI: a detailed proposal for solving the problem. Metrologia, 58 (5). 053002

Quincey, P; Mohr, P J; Phillips, W D (2019) Angles are inherently neither length ratios nor dimensionless. Metrologia, 56 (4). 043001 ISSN 0026-1394

Quincey, P G; Brown, R J C (2016) Implications of adopting plane angle as a base quantity in the SI. Metrologia, 53 (3). pp. 998-1002.

R

Ridler, N M (2016) The MTT-S standards coordinating committee- developing IEEE standards. IEEE Microw. Mag., 17 (9). p. 82.

Rowley, W R C (1992) Rapport au Comit‚ International des Poids et Mesures. Technical Report.

S

Sene, M; Gilmore, I; Janssen, J T (2017) Metrology is key to reproducing results. Nature, 547 (7664). pp. 397-399.

Smith, N A S; Sinden, D; Thomas, S A; Romanchikova, M; Talbott, J E; Adeogun, M (2020) Building confidence in digital health through metrology. The British Journal of Radiology, 93 (1109). 20190574 ISSN 0007-1285

T

Torr, G (2013) A viewpoint on innovation-based industrial competitiveness. Meas. Control, 46 (5). pp. 154-156.

W

Williams, E*; Robinson, I A (2011) Superconductivity and the SI (Metric) systems based on fundamental constants. In: 100 years of Superconductivity. Taylor & Francis. ISBN 9781439849460

Williams, J; Szyniszewski, M (2019) Constant failings. Physics World, 32 (3). p. 29. ISSN 0953-8585

Y

Younis, S A; Kim, K H; Shaheen, S M; Antoniadis, V; Tsang, Y F; Rinklebe, J; Deep, A; Brown, R J C (2021) Advancements of nanotechnologies in crop promotion and soil fertility: Benefits, life cycle assessment, and legislation policies. Renewable & Sustainable Energy Reviews, 152. 111686

This list was generated on Mon Aug 8 01:47:36 2022 BST.