Loveday, M S; Bicego, V*; Hähner, P*; Klingelhöffer, H*; Kühn, H-J*; Roebuck, B (2008) Analysis of a European TMF inter-comparison exercise. Int. J. Fatigue, 30 (2). pp. 382-390.

Roebuck, B; Loveday, M S; Brooks, M (2008) Characterisation of Nimonic 90 by the use of miniaturised multiproperty mechanical and physical tests. Int. J. Fatigue, 30 (2). pp. 345-351.

Loveday, M S (2008) Creep testing standards and the influence of bending. Mater. High Temp., 25 (4). pp. 277-286.

Hahner, P*; Rinaldi, C*; Bicego, V*; Affeldt, E*; Brendel, T*; Andersson, H*; Beck, T*; Klingelhoffer, H*; Kuhn, H J*; Koster, A*; Loveday, M S; Marchionni, M*; Rae, C* (2008) Research and development into a European strain-controlled thermo-mechanical code-of-practice for fatigue testing. Int. J. Fatigue, 30 (2). pp. 372-381.

Pietrzyk, M*; Kuziak, R*; Loveday, M S; Roebuck, B (2005) Effect of preheating and testing method on the flow stress of steels. In: Advanced Technology of Plasticity - 8th International Conference on Technology of Plasticity, 9-13 October 2005, Verona, Italy.

Roebuck, B; Loveday, M S; Chastel, Y*; Fiorucci, G*; dal Negro, T* (2003) High temperature solid torsion tests. Measurement Good Practice Guide. 58

Roebuck, B; Gee, M G; Gant, A; Loveday, M S (2003) Miniature thermo-mechanical ramping tests for accelerated material discrimination. ASTM Spec. Tech. Publ., 1428. pp. 270-281.

Roebuck, B; Lord, J D; Brooks, M; Loveday, M S; Sellars, C M*; Evans, R W* (2002) Measuring flow stress in hot axisymmetric compression tests. Measurement Good Practice Guide. 3 (Issue 2)

Loveday, M S; Mahon, G J*; Roebuck, B; Sellars, C M*; van der Winden, M R* (2002) Measuring flow stress in plane strain compression tests. Measurement Good Practice Guide. 27

Webster, G A*; Holdsworth, S R*; Loveday, M S; Perrin, I J*; Purper, H* (2001) A code of practice for conducting notched bar creep rupture tests and for interpreting the data. Technical Report. High Temperature Mechanical Testing Committee.

Loveday, M S (2001) High temperature flow stress measurements: Quality and traceablity issues. NPL Report. CMMT(MN)062

Loveday, M S; Collins, A*; Hall, R* (2001) A West Midlands Advanced Metal Forming Centre. NPL Report. MATC(A)42

Brooks, M; Loveday, M S; Gee, M G (2001) NPL Friction Measurement Methods: data assessment techniques and a sample database. NPL Report. MATC(A)13

Loveday, M S; Brooks, M (2001) High temperature friction: a simplified approach for estimating uncertainty of measurement. NPL Report. CMMT(A)305

Lord, J D; Loveday, M S (2001) Tools and lubricants for high temperature metalworking laboratory-scale tests. NPL Report. CMMT(MN)050

Loveday, M S; Brooks, M (2001) Consideration of high temperature friction measurement uncertainty. NPL Report. CMMT(MN)070

Brooks, M; Loveday, M S (2000) Friction and oxide strength data for forging and rolling process modelling. NPL Report. CMMT(MN)071

Loveday, M S; Lord, J D (2000) Temperature control and uncertainty in high temperature metalworking laboratory-scale tests. NPL Report. CMMT(MN)51

Ingelbrecht, C D*; Loveday, M S (2000) The certification of ambient temperature tensile properties of a reference material for tensile testing according to EN10002-1: CRM 661. Technical Report. European Commision.

Loveday, M S (1999) Room temperature tensile testing: a method for estimating uncertainty of measurement. NPL Report. CMMT(MN)048

Al-Abed, B*; Timmins, R*; Webster, G A*; Loveday, M S (1999) Validation of a code of practise for notched bar creep rupture testing: procedures and interpretation of data for design. Mater. High Temp., 16 (3). pp. 143-158.

Loveday, M S; Roebuck, B (1998) Credible data for forging and rolling process modelling. NPL Report. CMMT(MN)034

Loveday, M S; Saunders, S R J; Gee, M G (1998) Some methods for the determination of the strength of oxides. NPL Report. CMMT(A)96

Loveday, M S; Skelton, R P* (1998) High temperature mechanical testing: a review and future directions. In: ECF12 - 12th European Conference on Fracture, September 1998, Sheffield, UK.

Loveday, M S (1997) Data for forging and rolling process modelling. NPL Report. CMMT(MN)21

Loveday, M S (1997) Data for forging and rolling process modelling. Forging Technology, 5 (3). pp. 44-45.

Gee, M G; Loveday, M S; Brookes, M R (1997) Measurement of Friction Under Simulated Metal Working Conditions in Miniaturised Test Systems. In: World Tribology Congress, September 1997.

Skelton, R P*; Loveday, M S (1997) A re-interpretation of the BCR/VAMAS low cycle fatigue intercomparison programme using an energy criterion. Mater. High Temp., 14 (1). pp. 53-68.

Loveday, M S (1995) Creep testing: reference materials and uncertainty of measurement. In: The Donald McLean symposium - Structural materials: Engineering applications through scientific insight, Ed. E Hondros, M McLean, Pub. Institute of Materials, 1995, London.

Dyson, B F; Loveday, M S; Gee, M G (1995) Materials metrology and standards for structural performance.

Dean, G; Loveday, M S; Cooper, P M; Read, B E; Roebuck, B (1994) Aspects of modulus measurements. In: Materials metrology and standards for structural performance (Dyson, B F, Loveday, M S, Gee, M G, eds.). London, Chapman & Hall, pp. 150-209.

Loveday, M S (1994) Reference materials for mechanical testing and uncertainty of measurement. In: 2nd Eurolab Int. Symp. Testing for the year 2000, 1994, Florence, Italy.