Osgerby, S; Fry, A T (2011) Laboratory test procedures to high temperature steam atmosphere. Measurement Good Practice Guide. 74

Busso, E P*; Wright, L; Evans, H E*; McCartney, L N; Saunders, S R J; Osgerby, S; Nunn, J (2007) A physics-based life prediction methodology for thermal barrier coating systems. Acta. Mater., 55. pp. 1491-1503.

Osgerby, S; Banks, J P (2006) Experimental aspects of small punch testing at elevated temperatures. NPL Report. DEPC-MPE 029

Osgerby, S; Shingledecker, J* (2006) UK-US collaborative programme - advanced materials for low emission power plant. Review of standards for measurement of high temperature materials properties. NPL Report. DEPC-MPE 028

Osgerby, S (2004) Measurement of the creep performance of coatings used in gas turbines. NPL Report. DEPC-MN 003

Osgerby, S; Nunn, J W; Banks, J P; Maxwell, A S; Aldrich-Smith, G (2003) Young's Modulus measurement for coatings used in gas turbines. NPL Report. MATC(MN)54

Fry, A; Osgerby, S; Wright, M (2002) Oxidation of alloys in steam environments - a review. NPL Report. MATC(A)90

Osgerby, S; Saunders, S R J; Mulligan, E (2001) Corrosion issues at high temperature. In: National Measurement Conference (NMC) 2001, 6-8 November 2001, Harrogate, UK.

Osgerby, S (1999) The development of weak, de-alloyed zones during oxidation of high temperature alloys. NPL Report. CMMT(A)221

Osgerby, S; Saunders, S R J; Banks, J P; Gohil, D D (1998) Mechanical properties of high temperature corrosion scales on materials for high temperature heat exchangers. WP13, project UK5, final report to cost 501. NPL Report. CMMT(A)139

Saunders, S R J; Osgerby, S; Banks, J P; Sheriff, M U (1998) Code of practice for characterising gas turbine blade coatings. NPL Report. CMMT(A)132

Osgerby, S; Saunders, S R J; Evans, H E*; Gohil, D D; Banks, J P (1998) Lifetime prediction of high temperature components: breakdown of the protective oxide scale. NPL Report. CMMT(A)131

Osgerby, S; Saunders, S; Banks, J (1998) Measurement of fracture strain in oxide scales and coatings. NPL Report. CMMT(MN)032

Osgerby, S; Gohil, D D; Saunders, S R J; Evans, H* (1998) Measurement of growth strain in oxide scales by parallel beam x-ray diffraction. NPL Report. CMMT(MN)027

Osgerby, S; Saunders, S R J; Banks, J P (1998) Scale and coating adhesion: a procedure for laboratory tests. NPL Report. CMMT(MN)026

Osgerby, S; Gohil, D D; Saunders, S R J (1998) Cyclic high temperature corrosion in coal gasification plant and downtime corrosion: a procedure for laboratory tests to simulate industrial experience. NPL Report. CMMT(MN)025

Osgerby, S (1998) Design procedures for multiaxial stressing of particulate NMC. NPL Report. CMMT(MN)017

Osgerby, S; Saunders, S R J; Gohil, D D; Shafirstein, G (1997) Mechanical and chemical characterisation of coated systems. Materials Science Forum, 251-25 (2). pp. 737-744.

Saunders, S R J; Evans, H E*; M, Li*; Gohil, D D; Osgerby, S (1997) Oxidation growth stresses in an alumina-forming ferritic steel measured by creep deflection. Oxid. Met., 48 (3-4). pp. 189-200.

Banks, J P; Gohil, D D; Saunders, S R J; Osgerby, S; Evans, H E*; Dooley, R B* (1997) Oxide scale cracking: Kinetic studies using crack decoration and acoustic emission techniques. Microscopy of Oxidation 3, 675. pp. 330-338.

Saunders, S R J; Gohil, D D; Osgerby, S (1997) The combined effects of downtime corrosion and sulphidation on the degradation of commercial alloys. Mater. High Temp., 14 (3). pp. 237-243.

Dyson, B F; Osgerby, S (1995) Mathematical modelling of creep environment interactions. Sadhana, 20 (1). p. 185.

Osgerby, S; Dyson, B F* (1995) Physically-based modelling of stress-relaxation in superalloys and ferritic steels. Institute of Materials, 607. pp. 362-373.

Osgerby, S; Peck, M S (1994) Characterisation of tensile creep behaviour of HIP Si3N4. NPL Report. DMM(A)159

Shafirstein, G; Gee, M G; Osgerby, S; Saunders, S R J (1994) Error analysis in nanoindentation. In: Materials Research Society Symposium on Thim films: Stresses and mechanical properties V., November 1994, Boston, USA.

Osgerby, S; Dyson, B F (1994) Validation of a constitutive model for creep deformation and fracture in a 1Cr1/2Mo ferritic steel. In: Materials for Advanced Power Engineering, 3 - 6 October 1994, Liege, France.

Dyson, B F; Osgerby, S (1993) Modelling and analysis of creep deformation and fracture in a 1 Cr ½ Mo ferritic steel. NPL Report. DMM(A)116