Zhang, H; Green, C; Woolliams, P; Nunn, J; Mingard, K; Fry, A T (2022) Rapid mapping of mechanical properties of AM samples with indentation. NPL Report. MAT 116

Bahshwan, M; Gee, M; Nunn, J; Myant, C W; Reddyhoff, T (2022) In situ observation of anisotropic tribological contact evolution in 316L steel formed by selective laser melting. Wear, 490-49. 204193

Wolski, M; Podsiadio, P; Stachowiak, G W; Holmberg, K; Laukkanen, A; Ronkainen, H; Gee, M G; Nunn, J; Gachot, C; Li, L (2017) Multiscale characterisation of 3D surface topography of DLC coated and uncoated surfaces by directional blanket covering (DBC) methods. Wear, 388. pp. 47-56.

Nunn, J; Gee, M G; Orkney, L; Fry, A T (2017) In situ remote hot erosion scar measurement. Wear, 380-38. pp. 217-227.

Gee, M G; Mingard, K P; Nunn, J; Roebuck, B; Gant, A (2017) In situ scratch testing and abrasion simulation of WC/Co. Int. J. Refrac. Met. Hard Mat., 62. pp. 192-201.

Gee, M G; Nunn, J (2017) Real time measurement of wear and surface damage in the sliding wear of alumina. Wear, 376. pp. 1866-1876.

Nunn, J (2016) DIY soundcard based temperature logging system. Part I: design. Phys. Educ., 51 (6). 065002

Nunn, J (2016) DIY soundcard based temperature logging system. Part II: applications. Phys. Educ., 51 (6). 065003

Holmberg, K*; Laukkanen, A*; Ronkainen, H*; Waudby, R*; Stachowiak, G*; Wolski, M*; Podsiadlo, P*; Gee, M G; Nunn, J; Gachot, C*; Li, L* (2015) Topographical orientation effects on friction and wear in sliding DLC and steel contacts, part 1: experimental. Wear, 330. pp. 3-22.

Kidd, G*; Nunn, J (2012) Application of pulsed thermography to quality assurance of thermal barrier coatings. Proc. Inst. Mech. Eng. G, J. Aerosp. Eng., 226 (G7). pp. 873-880.

Carpenter, M*; Nunn, J (2012) Impulse Excitation Modulus measurements of Hardmetal Rods using custom software on a standard personal computer and microphone. Mater. Eval., 70 (7). pp. 863-871.

Fry, A T; Lodeiro, M J; Mingard, K P; Nunn, J (2011) Advanced materials for low emission power plant: phase 2 second annual report. NPL Report. MAT 50

Jennett, N M; Nunn, J (2011) High resolution measurement of dynamic (nano) indentation impact energy: a step towards the determination of indentation fracture resistance. Philos. Mag., 91 (7-9). pp. 1200-1220.

Seraffon, M; Simms, N J*; Nicholls, J R*; Sumner, J*; Nunn, J (2011) Performance of thermal barrier coatings in industrial gas turbine conditions. Mater. High Temp., 28 (4). pp. 309-314.

Fry, A T; Lodeiro, M J; Mingard, K P; Nunn, J (2010) Advanced materials for low emission power plant phase 2 first annual report. NPL Report. MAT 45

Shaw, A; Nunn, J (2010) The feasibility of an infrared system for real-time visualisation and mapping of ultrasound fields. Phys. Med. Biol., 55 (11). N321-N327

Blessley, K*; Young, C*; Nunn, J; Coddington, J*; Shepard, S* (2010) The feasibility of flash thermography for the examination and conservation of works of art. Studies in Conservation, 55 (2). pp. 107-120.

Wickham, M; Jennett, N M; Nunn, J; Gohil, D D; Hunt, C (2009) Measuring tin whiskering propensity:measuring internal stress in tin coatings by nanoindentation. NPL Report. MAT 29

Nunn, J (2008) Thermographic evaluation of thermal barrier coatings on contoured substrates. NPL Report. MN 4

Fry, A T; Banks, J P; Nunn, J; Brown, L J (2008) Comparison of the thermal cycling performance of thermal barrier coatings under isothermal and heat flux conditions. Mater. Sci. Forum, 595-59. pp. 77-85.

Busso, E P*; Evans, H E*; Wright, L; Nunn, J; McCartney, L N; Osgerby, S* (2008) A software tool for lifetime prediction of thermal barrier coating systems. Mater. Corros., 59 (7). pp. 556-565.

Busso, E P*; Evans, H E*; Wright, L; McCartney, L N; Nunn, J; Osgerby, S* (2008) A software tool for lifetime prediction of thermal barrier coating systems. Mater. Corros., 59 (7). pp. 556-565.

Busso, E P*; Wright, L; Evans, H E*; McCartney, L N; Saunders, S R J; Osgerby, S; Nunn, J (2007) A physics-based life prediction methodology for thermal barrier coating systems. Acta. Mater., 55. pp. 1491-1503.

Broughton, W R; Nunn, J (2006) Non-invasive methods for monitoring microstructural condition of materials. NPL Report. DEPC-MPE 032