Aldrich-Smith, G; Jennett, N M; Hangen, U (2022) Direct measurement of nanoindentation area function by metrological AFM. International Journal of Materials Research, 96 (11). pp. 1267-1271.

Hou, X; Jennett, N M (2017) A method to separate and quantify the effects of indentation size, residual stress and plastic damage when mapping properties using instrumented indentation. Journal of Physics D - Applied Physics, 50 (45). 455304

Hou, X D*; Jennett, N M; Parlinska-Wojtan, M* (2013) Exploiting interactions between structure size and indentation size effects to determine the characteristic dimension of nano-structured materials by indentation. J. Phys. D, Appl. Phys., 46 (26). 265301

Hou, X.; Jennett, N M (2012) Application of a modified slip-distance theory to the indentation of single-crystal and polycrystalline copper to model the interactions between indentation size and structure size effects. Acta. Mater., 60 (10). pp. 4128-4135.

Maxwell, A S; Monclus, M; Jennett, N M; Dean, G (2011) Accelerated testing of creep in polymeric materials using nanoindentation. Polym. Test., 30 (4). pp. 366-371.

Jiang, L D*; Spearing, S M*; Monclus, M A; Jennett, N M (2011) Formation and mechanical characterisation of SU8 composite film reinforced with horizontally aligned and high volume fraction CNTs. Comp. Sci. Technol., 71 (10). pp. 1301-1308.

Jennett, N M; Nunn, J (2011) High resolution measurement of dynamic (nano) indentation impact energy: a step towards the determination of indentation fracture resistance. Philos. Mag., 91 (7-9). pp. 1200-1220.

Monclus, M A; Jennett, N M (2011) In search of validated measurements of the properties of visco-elastic materials by indentation with sharp indenters. Philos. Mag., 91 (7-9). pp. 1308-1328.

Jennett, N M; Goken, M*; Durst, K* (2011) Nano-mechanical testing in materials research and development. Philos. Mag., 91 (7-9). pp. 1035-1036.

Gee, M G; Jennett, N M (2010) Accuracy counts. Mater. World, 18 (8). pp. 22-24.

Jiang, L D*; Lewis, G*; Spearing, S M*; Jennett, N M; Monclus, M (2010) Development of a low temperature amorphous Si/Ti for integrated MEMS/NEMS. Microelectron. Eng., 87 (5-8). pp. 1259-1262.

Hou, X; Bushby, A*; Jennett, N M (2010) Direct measurement of surface shape for validation of indentation deformation and plasticity length-scale effects: a comparison of methods. Meas. Sci. Technol., 21 (11). 115105

Hansen, P-E*; Roebben, G*; Babick, F*; Boyd, R; Braun, A*; Busch, I*; Danzebrink, H-U*; Depero, L*; Dirscherl, K*; Dziomba, T*; Eriksson, E*; Franks, K*; Gee, M G; Jennett, N M; Kestens, V*; Koenders, L*; Krumrey, M*; Lausmaa, J*; Leach, R K; Pendrill, L*; Pidduck, A*; Put, S*; Roy, D; Stintz, M*; Turan, R*; Yacoot, A (2010) Introductory guide to nanometrology. Technical Report. European Commission.

Wickham, M; Jennett, N M; Nunn, J; Gohil, D D; Hunt, C (2009) Measuring tin whiskering propensity:measuring internal stress in tin coatings by nanoindentation. NPL Report. MAT 29

Jennett, N M; Ghisleri, R*; Michler, J* (2009) Enhanced yield strength of materials -the thinness effect. Appl. Phys. Lett., 95 (12). 123102

Chudoba, T*; Jennett, N M (2008) Higher accuracy analysis of instrumented indentation data obtained with pointed indenters. J. Phys. D, Appl. Phys., 41 (21). 215407

Hou, X; Bushby, A J*; Jennett, N M (2008) Study of the interaction between the indentation size effect and Hall-Petch effect with spherical indenters on annealed polycrystalline copper. J. Phys. D, Appl. Phys., 41 (7). 074006

Jennett, N M (2007) An introduction to instrumented indention testing. Measurement Good Practice Guide. 92

Hou, X; Zhu, T T*; Jennett, N M; Bushby, A J* (2007) The indentation size effect and hall-petch behaviour of annealed polycrystalline copper. Mater. Res. Soc. Symp. Proc., 976. 0976-EE09-10

Jennett, N M (2006) Mechanical testing of coatings. In: Surface coatings for protection against wear. Woodhead Publishing. ISBN 9781855737679

Morrell, R; Gant, A J; Jennett, N M (2006) Characterising surface damage in advanced technical ceramics. NPL Report. DEPC-MPE 027

Jennett, N M; Pharr, G M*; McHargue, C J* (2006) Instrumented indentation testing in materials research and development. Philos. Mag., 86 (33-35). pp. 5153-5154.

Aldrich-Smith, G; Jennett, N M; Housden, J* (2005) Adhesion of thin coatings - The VAMAS (TWA22-2) interlaboratory exercise. Surf. Coat. Technol., 197 (2-3). pp. 336-344.

Aldrich-Smith, G; Jennett, N M; Housden, J* (2005) Adhesion of thin coatings - the VAMAS (TWA22-2) interlaboratory exercise. Surf. Coat. Technol., 197 (2-3). pp. 336-344.

Aldrich-Smith, G; Jennett, N M (2004) Static and dynamic calibrations of the nanotest at NPL. NPL Report. DEPC-MPE 004

Aldrich-Smith, G; Jennett, N M; Housden, J* (2004) A round robin to measure the adhesion of thin coatings. NPL Report. DEPC-MPE 001

Maxwell, A S; Owen-Jones, S; Jennett, N M (2004) Measurement of Young's modulas and Poisson's ratio of thin coatings using impact excitation and nano-indentation. Rev. Sci. Insrum., 75 (4). pp. 970-975.

Jennett, N M; Aldrich-Smith, G; Maxwell, A S (2004) Validated measurement of Young's Modulus, Poisson Ratio and thickness for thin coatings by combining instrumented (nano)indentation and acoustic measurements. J. Mater. Res., 19. pp. 143-148.

Maxwell, A S; Owen-Jones, S; Jennett, N M (2003) Measurement of the Poisson's ratio of coatings. NPL Report. MATC(MN)51

Jennett, N M; Owen-Jones, S (2002) The scratch test: calibration, verification and the use of a certified reference material. Measurement Good Practice Guide. 54

Jennett, N M; Bushby, A J* (2002) Adaptive protocol for robust estimates of coatings properties by nanoindentation. Mater. Res. Soc. Symp. Proc., 695. pp. 73-78.

Jennett, N M; McCartney, L N; Lawrence, K; Hunt, R; Maxwell, A; Koskinen, J*; Meneve, J*; Wegener, W*; Gibson, N*; Zhihui Xu*,; Bushby, A J*; Chudoba, T*; Cavaleiro, A*; Herrmann, K*; Consiglio, R*; Augereau, F*; Schneider, D* (2001) Indicoat Final Report Determination of hardness and modulus of thin films and coatings by nanoindentation. NPL Report. MATC(A)24

Maudgal, S; Sims, G D; Johnstone, J E; Jennett, N M (1998) Characterisation of surface roughness of fibres by atomic force microscopy. NPL Report. CMMT(MN)024

Jennett, N M; Meneve, J* (1998) Depth sensing indentation of thin hard films: a study of modulus measurement sensitivity to indentation parameters. In: Fundamentals of Nanodentation and Nanotribology Symposium, 13-17 April 1998, San Francisco, USA.

Jennett, N M; Shafirstein, G; Saunders, S R J (1995) Comparison of inderter tip shape measurement using a calibrated AFM and indentation into fused silica. In: Hardness testing in theory and practise, VDI BERICHTE 1194. VDI-Verlag GmbH, Dusseldorf, pp. 201-210. ISBN 3-18-0911948

Gee, M G; Jennett, N M (1995) High resolution characterisation of tribochemical films on alumina. Wear, 193 (2). pp. 133-145.

Gee, M G; Jennett, N M (1994) Evaluation of the mechanical properties of tribochemical. In: Thin Films: Stresses and Mechanical Properties V Symposium, 28 November - 2 December 1994, Boston, USA.