Dean, G D; McCartney, L N; Mera, R D; Urquhart, J M (2011) Modelling non-linear viscoelasticity in polymers for design using finite element analysis. Polym. Eng. Sci., 51 (11). pp. 2210-2219.

Dean, G D; McCartney, L N; Crocker, L E; Mera, R D (2009) Modelling the long-term deformation behaviour of polymers for finite element analysis. NPL Report. MAT 31

Dean, G D; McCartney, L N; Crocker, L E; Mera, R D (2009) Modelling the long-term deformation behaviour of polymers for finite element analysis. Plast. Rubber Compos., 38 (9-10). pp. 433-443.

Dean, G D; McCartney, L N; Crocker, L E; Mera, R D (2008) Modelling the long-term deformation behaviour of polymers for finite element analysis. NPL Report. MAT 22

Dean, G D; Mera, R D (2005) Measurement of failure in tough plastics at high strain rates. NPL Report. DEPC-MN 028

Mera, R D; Duncan, B C (2005) Characterising the absorbency of porous substrates. NPL Report. DEPC-MN 015

Mera, R D; Duncan, B C (2005) Determining the wettability of substrates to hot melt adhesives. NPL Report. DEPC-MN 014

Duncan, B C; Mera, R D; Leatherdale, D*; Taylor, M*; Musgrove, R* (2005) Techniques for characterising the wetting, coating and spreading of adhesives on surface. NPL Report. DEPC-MPR 020

Dean, G D; Mera, R D (2004) Determination of material properties and parameters required for the simulation of impact performance of plastics using finite element analysis. NPL Report. DEPC-MPR 007

Dean, G D; Mera, R D (2004) Modelling creep in toughened epoxy adhesives for finite element analysis. NPL Report. DEPC-MPR 003

Mera, R D; Sims, G D (2003) Round-robin validation exercise for the thick adherend shear test in compression. NPL Report. MATC(MN)46

Dean, G; Mera, R D; Arranz, E (2002) Determination of the properties of plastics at high strain rates. NPL Report. MATC(A)116

Mera, R D; Sims, G D (2001) Opportunities for composites in the energy industry. NPL Report. MATC(A)64

Broughton, W R; Attanz, E; Mera, R D; Duncan, B C (2001) Effects of specimen geometry on the strength of flexible adhesive joints. NPL Report. MATC(MN)11

Duncan, B C; Crocker, L; Urquhart, J M; Arranz, E; Mera, R D; Broughton, W R (2001) Failure of flexible adhesive joints. NPL Report. MATC(A)36

Broughton, W R; Mera, R D; Hinopoulos, G (1999) Creep testing of adhesive joints T-peel test. NPL Report. CMMT(A)193

Broughton, W R; Mera, R D (1999) Cyclic fatigue testing of adhesive joints : environmental effects. NPL Report. CMMT(A)192

Broughton, W R; Mera, R D; Hinopoulos, G (1999) Cyclic fatigue testing of adhesive joints: test method assessment. NPL Report. CMMT(A)191

Broughton, W R; Mera, R D (1999) Environmental degradation of adhesive joints: accelerated testing. NPL Report. CMMT(A)197

Broughton, W R; Mera, R D; Hinopoulos, G (1999) Environmental degradation of adhesive joints: single-lap joint geometry. NPL Report. CMMT(A)196

Broughton, W R; Mera, R D (1997) Project PAJ3 combined cyclic loading and hostile environments 1996-1999. Report No. 1, Review of durability test methods and standards for assessing long term performance of adhesive joints. NPL Report. CMMT(A)61

Broughton, W R; Mera, R D (1997) Project PAJ3 combined cyclic loading and hostile environments 1996-1999. Report No.2: review of life prediction methodology and adhesive joint design and analysis software. NPL Report. CMMT(A)62