< back to main site

Publications

Items where Author is "Dean, G"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 36.

Report/Guide

Dean, G; Mera, R D; Arranz, E (2002) Determination of the properties of plastics at high strain rates. NPL Report. MATC(A)116

Dean, G; Read, B; Wright, L (2002) A comparison of the data requirements and predictive accuracy of the cavitation model and a simple model for non-linear behaviour in finite element systems. NPL Report. MATC(A)120

Dean, G; Wright, L (2002) Comparison of the measured and predicted deformation of a circular plate of an ABS polymer used under centre loading. NPL Report. MATC(A)105

Dean, G; Wright, L (2002) Analysis of failure tests on uniaxial tensile and plate specimens of ABS. NPL Report. MATC(A)88

Read, B E; Dean, G; Wright, L (2002) Influence of strain rate and temperature on the stress/strain behaviour of rubber-toughened plastics. NPL Report. MATC(A)77

Dean, G; Read, B E; Wright, L (2002) A further evaluation of the cavitation model for rubber-toughened plastics. NPL Report. MATC(A)75

Crocker, L; Dean, G (2001) Temperature dependence of the properties of an epoxy adhesive. NPL Report. MATC(A)43

Dean, G; Wright, L (2000) Deformation of a centrally loaded circular plate of a thermoplastic material: comparison of measurements with predictions using finite element analysis. NPL Report. CMMT(A)299

Dean, G; Crocker, L E (2000) Comparison of the measured and predicted deformation of an adhesively bonded lap-joint specimen. NPL Report. CMMT(A)293

Dean, G; Hunt, R A; Shastri, R* (2000) Illustrations of the application of finite element and processing simulation analyses to plastics. NPL Report. CMMT(A)266

Dean, G; Lord, G; Duncan, B C (1999) Comparison of the measured and predicted performance of adhesive joints under impact. NPL Report. CMMT(A)198

Dean, G (1999) The guide to the preparation and testing of bulk specimens. Measurement Good Practice Guide. 17

Read, B E; Dean, G; Duncan, B C (1999) Project PAJ2. Report No 11. Strain rate and temperature dependence of the properties of adhesives. Prediction of high rate data. NPL Report. CMMT(A)169

Read, B E; Dean, G; Duncan, B C (1999) Project CAM6, Report No. 6. Characterisation of the strain rate and temperature dependence of the properties of plastics for the prediction of impact performance. NPL Report. CMMT(A)144

Dean, G; Crocker, L E (1999) Project PAJ2. Report No 10. A proposed failure criterion for tough adhesives. NPL Report. CMMT(A)158

Dean, G; Read, B E; Duncan, B C (1999) Project PAJ2, Report No. 7, An evaluation of yield criteria for adhesives for finite element analysis. NPL Report. CMMT(A)117

Read, B E; Dean, G; Duncan, B C (1998) Project CAM6. Report No. 5. Characterisation of the Non-linear behaviour of plastics for finite element analysis. NPL Report. CMMT(A)114

Dean, G; Hu, F; Duncan, B C (1998) Project PAJ2, Report No. 5. The application of finite element methods to the design of adhesive joints. NPL Report. CMMT(A)102

Dean, G; Read, B E; Duncan, B C (1998) Project CAM6, Report No. 3. The application of finite element methods to the prediction of the impact performance of plastics. NPL Report. CMMT(A)100

Dean, G; Shastri, R*; Lockett, F J* (1997) Project CAM6, Report No.2, ISO guide to the acquisition and presentation of design data for plastics. NPL Report. CMMT(A)82

Dean, G; Charalambides, M N (1997) Project CAM6. Development of test methods for design under high rates of loading. Report No. 1 April 1997 - Data requirements for the use of finite element methods to predict the impact performance of plastics. NPL Report. CMMT(A)58

Charalambides, M N; Dean, G (1997) Project PAJ2, dynamic performance of adhesively bonded joints. Report No 2 April 1997, constitutive models and their data requirements for use in finite analysis of adhesives under impact loading. NPL Report. CMMT(A)59

Duncan, B C; Dean, G (1996) Test methods for determining shear property data for adhesives suitable for design. Part 1: Notched-beam shear (Iosipescu) and notched-plate shear (Arcan) methods for bulk and joint test specimens. Part A: Summary. Technical Report. CMMT(B)55

Rides, M; Dean, G (1996) Evaluation of mould designs for preparing standard plate specimens of plastics by injection moulding. NPL Report. CMMT(A)30

Dean, G (1995) International standards for comparable data for plastics. NPL Report. DMM(A)166

Read, B E; Dean, G; Tomlins, P E (1993) Creep and physical ageing of PVC: dependence on stress and temperature. NPL Report. DMM(A)115

Article

Maxwell, A S; Monclus, M; Jennett, N M; Dean, G (2011) Accelerated testing of creep in polymeric materials using nanoindentation. Polym. Test., 30 (4). pp. 366-371.

Dean, G; Wright, L (2003) An evaluation of the use of finite element analysis for predicting the deformation of plastics under impact loading. Polym. Test., 22 (6). pp. 625-631.

Read, B E; Dean, G; Tomlins, P E (1994) Creep and physical ageing of PVC: dependence on stress and temperature. J. Non-Cryst. Solids, 172. 562 - 568

Tomlins, P E; Read, B E; Dean, G (1994) The effect of temperature on creep and physical ageing of poly (vinyl chloride). Polymer, 35. pp. 4376-81.

Conference or Workshop Item

Dean, G (1997) Design data for plastics for finite element analysis. In: Proc. Polymer Testing Conference 97, April 1997, Shawbury, Shropshire.

Dean, G (1996) Proposals for a revision of ISO 11403-1: comparable multipoint data: Part 1 Mechanical properties. In: Proc. Euradh '96, September 1996, Cambridge.

Duncan, B C; Dean, G; Tomlins, P E (1996) Tensile testing of bulk and thin film adhesives. In: EURADH '96 - 3rd European Adhesion Conference, September 1996, Cambridge, UK.

Dean, G; Duncan, B C; Adams, R*; Thomas, R*; Vaughn, L* (1996) An evaluation of bulk and joint specimen tests for determining the shear properties of adhesives. In: Proc. Euradh '96, September 1996, Cambridge.

Breuer, H*; Dean, G; Tiba, H*; Shastri, R* (1994) International standards for the acquisition and presentation of comparable data on plastics. In: Proc. SPE Challenging the status quo in design, 1994.

Book Chapter/Section

Dean, G; Loveday, M S; Cooper, P M; Read, B E; Roebuck, B (1994) Aspects of modulus measurements. In: Materials metrology and standards for structural performance (Dyson, B F, Loveday, M S, Gee, M G, eds.). London, Chapman & Hall, pp. 150-209.

This list was generated on Mon Oct 25 08:19:24 2021 BST.