A

Aldrich-Smith, G; Jennett, N M; Housden, J* (2004) A round robin to measure the adhesion of thin coatings. NPL Report. DEPC-MPE 001

B

Broughton, W R (1999) Creep testing of adhesive joints analysis of creep rupture data. NPL Report. CMMT(A)195

Broughton, W R (2023) Durability performance of adhesive joints. Measurement Good Practice Guide. 28 (Issue 2)

Broughton, W R (2010) Improving bonding in hostile chemical environments. In: Advances in Structural Adhesive Bonding. Woodhead Publishing Ltd. ISBN 9781845694357

Broughton, W R (1999) Project PAJ3 - Combined cyclic loading and hostile environments 1996-1999. Report no 19. Project PAJ3: final report. NPL Report. CMMT(A)237

Broughton, W R (1999) Test methods for assessing durability performance of adhesive joints. NPL Report. CMMT(A)208

Broughton, W R (2012) Testing the mechanical, thermal and chemical properties of adhesives for marine environments. In: Adhesives in Marine Engineering. Woodhead Publishing Ltd, pp. 99-154. ISBN 9781845694524

Broughton, W R; Attanz, E; Mera, R D; Duncan, B C (2001) Effects of specimen geometry on the strength of flexible adhesive joints. NPL Report. MATC(MN)11

Broughton, W R; Crocker, L E; Gower, M R L; Shaw, R M (2004) Assessment of predictive analysis for bonded and bolted T-joints. NPL Report. DEPC-MPR 002

Broughton, W R; Crocker, L E; Urquhart, J M (2001) Geometric and material property effects on the strength of rubber-toughened adhesive joints. NPL Report. MATC(MN)10

Broughton, W R; Crocker, L E; Urquhart, J M (2001) Strength of adhesive joints: a parametric study. NPL Report. MATC(A)27

Broughton, W R; Dean, G D (2023) Fatigue and creep testing of adhesives and thermoplastic joined systems. Measurement Good Practice Guide. 104 (Issue 2)

Broughton, W R; Gower, M R L (2023) Preparation and testing of adhesive joints. Measurement Good Practice Guide. 47 (Issue 2)

Broughton, W R; Lodeiro, M J (2003) Assessment of characterisation techniques for evaluating surface treatments for adhesive bonding. NPL Report. MATC(A)140

Broughton, W R; Lodeiro, M J (2002) Review of surface characterisation techniques for adhesive bonding. NPL Report. MATC(A)66

Broughton, W R; Lodeiro, M J; Shaw, R M; Arranz, E; Gnaniah, S J P (2002) Assessment of surface characterisation techniques for adhesive bonds. NPL Report. MATC(MN)24

Broughton, W R; Mera, R D (1999) Cyclic fatigue testing of adhesive joints : environmental effects. NPL Report. CMMT(A)192

Broughton, W R; Mera, R D (1999) Environmental degradation of adhesive joints: accelerated testing. NPL Report. CMMT(A)197

Broughton, W R; Mera, R D (1997) Project PAJ3 combined cyclic loading and hostile environments 1996-1999. Report No. 1, Review of durability test methods and standards for assessing long term performance of adhesive joints. NPL Report. CMMT(A)61

Broughton, W R; Mera, R D (1997) Project PAJ3 combined cyclic loading and hostile environments 1996-1999. Report No.2: review of life prediction methodology and adhesive joint design and analysis software. NPL Report. CMMT(A)62

Broughton, W R; Mera, R D; Hinopoulos, G (1999) Creep testing of adhesive joints T-peel test. NPL Report. CMMT(A)193

Broughton, W R; Mera, R D; Hinopoulos, G (1999) Cyclic fatigue testing of adhesive joints: test method assessment. NPL Report. CMMT(A)191

Broughton, W R; Shaw, R M (2004) Monitoring the effect of damage in bonded and bolted T-joints. NPL Report. MATC(MN)56

C

Charalambides, M N; Dean, G (1997) Project PAJ2, dynamic performance of adhesively bonded joints. Report No 2 April 1997, constitutive models and their data requirements for use in finite analysis of adhesives under impact loading. NPL Report. CMMT(A)59

Crocker, L; Dean, G (2001) Temperature dependence of the properties of an epoxy adhesive. NPL Report. MATC(A)43

Crocker, L; Duncan, B C (2001) Methods for obtaining volumetric coefficients for hyperelastic modelling of the flexible adhesives. NPL Report. CMMT(A)286

Crocker, L E; Broughton, W R (2002) Geometric and material property effects on the performance of adhesive T-joints. NPL Report. MATC(MN)29

Crocker, L E; Dean, G D (2001) Tensile testing of adhesive butt-joint specimens. NPL Report. MATC(MN)09

Crocker, L E; Duncan, B C; Hughes, R G; Urquhart, J M (1999) Hyperelastic modelling of flexible adhesives. NPL Report. CMMT(A)183

Croker, L E; Gower, M R L; Broughton, W R (2003) Finite element assessment of geometric and material property effects on the strength and stiffness of bonded and bolted T-joints. NPL Report. MATC(A)124

D

Dean, G; Crocker, L E (2000) Comparison of the measured and predicted deformation of an adhesively bonded lap-joint specimen. NPL Report. CMMT(A)293

Dean, G; Crocker, L E (1999) Project PAJ2. Report No 10. A proposed failure criterion for tough adhesives. NPL Report. CMMT(A)158

Dean, G; Duncan, B C; Adams, R*; Thomas, R*; Vaughn, L* (1996) An evaluation of bulk and joint specimen tests for determining the shear properties of adhesives. In: Proc. Euradh '96, September 1996, Cambridge.

Dean, G; Hu, F; Duncan, B C (1998) Project PAJ2, Report No. 5. The application of finite element methods to the design of adhesive joints. NPL Report. CMMT(A)102

Dean, G; Lord, G; Duncan, B C (1999) Comparison of the measured and predicted performance of adhesive joints under impact. NPL Report. CMMT(A)198

Dean, G; Read, B E; Duncan, B C (1999) Project PAJ2, Report No. 7, An evaluation of yield criteria for adhesives for finite element analysis. NPL Report. CMMT(A)117

Dean, G D (1997) Adhesives - determination of shear behaviour of structural bonds part 2: thick-adherend tensile-test method. NPL Report. CMMT(A)81

Dean, G D (2006) Modelling non-linear creep behaviour of an epoxy adhesive. NPL Report. DEPC-MPR 052

Dean, G D; Broughton, W R (2002) Models for predicting deformation and failure in adhesives and polymer matrix composites. NPL Report. MATC(A)68

Dean, G D; Broughton, W R (2005) A review of creep modelling for toughened adhesives and thermoplastics. NPL Report. DEPC-MPR 011

Dean, G D; Crocker, L E (2001) Analysis of joint tests on an epoxy adhesive. NPL Report. MATC(A)40

Dean, G D; Crocker, L E (2023) The use of finite element methods for design with adhesives. Measurement Good Practice Guide. 48 (Issue 2)

Dean, G D; Crocker, L E; Read, B; Wright, L (2004) Prediction of deformation and failure of rubber-toughened adhesive joints. International Journal of Adhesives and Adhesion, 24 (4). pp. 295-306.

Dean, G D; Mera, R D (2004) Modelling creep in toughened epoxy adhesives for finite element analysis. NPL Report. DEPC-MPR 003

Duncan, B (2010) Testing adhesive joints. In: Advances in Structural Adhesive Bonding. CRC Press. ISBN 9781439802175

Duncan, B (2001) The hyperelastic properties of a polyurethane adhesive. NPL Report. MATC(A)23

Duncan, B C (2001) Loop tack measurements. NPL Report. MATC(MN)02

Duncan, B C (1999) Preparation of bulk adhesive test specimens. NPL Report. CMMT(MN)057

Duncan, B C (1999) Project PAJ1: final report. NPL Report. CMMT(A)232

Duncan, B C (1998) Project PAJ2: Report No. 6, Project CAM6: Report No. 4. NPL Report. CMMT(A)109

Duncan, B C (1999) Test methods for determining hyperelastic properties of flexible adhesives. NPL Report. CMMT(MN)054

Duncan, B C; Abbott, S G*; Roberts, R A* (1999) Adhesive tack. Measurement Good Practice Guide. 26

Duncan, B C; Abbott, S*; Court, R*; Roberts, R*; Leatherdale, D* (2003) A review of adhesive bonding assembly processes and measurement methods. NPL Report. MATC(A)135

Duncan, B C; Arranz, E; Crocker, L E; Urquhart, J M (2003) Tests for strength of adhesion. NPL Report. MATC(MN)49

Duncan, B C; Arranz, E; Crocker, L E; Urquhart, J M (2004) Tests for strength of adhesion. NPL Report. MATC(A)161

Duncan, B C; Broughton, W R (2023) Characterising strength of adhesion. Measurement Good Practice Guide. 72 (Issue 2)

Duncan, B C; Crocker, L; Urquhart, J M; Arranz, E; Mera, R D; Broughton, W R (2001) Failure of flexible adhesive joints. NPL Report. MATC(A)36

Duncan, B C; Crocker, L E (2023) Characterisation of flexible adhesives for design. Measurement Good Practice Guide. 45 (Issue 2)

Duncan, B C; Crocker, L E (2001) Review of tests for adhesion strength. NPL Report. MATC(A)67

Duncan, B C; Crocker, L E; Urquhart, J M (2000) Evaluation of hyperelastic finite element models for flexible adhesive joints. NPL Report. CMMT(A)285

Duncan, B C; Dean, G (1996) Test methods for determining shear property data for adhesives suitable for design. Part 1: Notched-beam shear (Iosipescu) and notched-plate shear (Arcan) methods for bulk and joint test specimens. Part A: Summary. Technical Report. CMMT(B)55

Duncan, B C; Dean, G; Tomlins, P E (1996) Tensile testing of bulk and thin film adhesives. In: EURADH '96 - 3rd European Adhesion Conference, September 1996, Cambridge, UK.

Duncan, B C; Hinopoulos, G; Ogilvy-Robb, K; Arranz, E (2000) Rate and temperature dependent mechanical properties of a flexible adhesive. NPL Report. CMMT(A)262

Duncan, B C; Lay, LA (1999) An intercomparison of tack measurements. NPL Report. CMMT(A)176

Duncan, B C; Leatherdale, D* (2005) Surface testing for bonding. Measurement Good Practice Guide. 77

Duncan, B C; Lodeiro, M J (2004) Adhesion durability assessment. NPL Report. DEPC-MPR 004

Duncan, B C; Maxwell, A S (1999) Measurement methods for time-dependent properties of flexible adhesives. NPL Report. CMMT(A)178

Duncan, B C; Mera, R D; Leatherdale, D*; Taylor, M*; Musgrove, R* (2005) Techniques for characterising the wetting, coating and spreading of adhesives on surface. NPL Report. DEPC-MPR 020

Duncan, B C; Ogilvie-Robb, K (1999) Assessment of the correlation between tack and visco-elasticity. NPL Report. CMMT(A)190

Duncan, B C; Ogilvie-Robb, K (1999) Creep of flexible adhesive joints. NPL Report. CMMT(A)225

Duncan, B C; Pearce, A (1999) Comparison of impact and high rate tests for determining properties of adhesives and polymers needed for design under impact loading. NPL Report. CMMT(A)134

Duncan, B C; Pilkington, G D; Nottay, J S; Allen, C R G; Lawrence, K; Urquhart, J M; Roberts, S J (2007) Diffusion of moisture in adhesive bonds. NPL Report. DEPC-MPR 062

Duncan, B C; Tomlins, P E (1994) MTS Adhesives Project 1: basic mechanical properties for Design Report No. 2 October 1994: measurement of strain in bulk adhesive testpieces. Technical Report.

G

Gower, M R L; Broughton, W R (1999) Fractographic analysis of adhesive joints. NPL Report. CMMT(A)205

Gower, M R L; Broughton, W R (2002) Geometric and bolt position effects on the performance of bolted T-joints. NPL Report. MATC(MN)30

H

Hinopoulos, G; Broughton, W R (1999) An improved modelling approach to moisture absorption in adhesive joints using the finite element method. NPL Report. CMMT(A)204

Hou, P Y*; Saunders, S R J (2005) A survey of test methods for scale adhesion. Mater. High Temp., 22 (1-2). pp. 121-129.

Hu, F; Olusanya, A (1998) Extensions to GLUEMAKER a finite element modelling tool for adhesive joints to include material models for flexible adhesives. NPL Report. CMMT(A)137

L

Lodeiro, M J; Broughton, W R; Gnaniah, S (2002) Optimisation of corona discharge surface treatment for improved adhesive bonding using design of experiments. NPL Report. MATC(MN)25

M

Maxwell, A S (2001) Review of test methods for coating adhesion. NPL Report. MATC(A)49

Maxwell, A S; Duncan, B C (1999) Evaluation of a multi-functional adhesive test station. NPL Report. CMMT(A)177

Maxwell, A S; Rudlin, J* (2007) Non-destructive assessment of coating adhesion. Measurement Good Practice Guide. 100

Mera, R D; Duncan, B C (2005) Determining the wettability of substrates to hot melt adhesives. NPL Report. DEPC-MN 014

N

Niklewicz, J; Ferris, D H; Nunn, G J; Sims, G D (1999) The use of pin bearing data for the preliminary design of 'bolted' joints. In: UNSPECIFIED.

Niklewicz, J; Ferriss, D H; Nunn, G J; Sims, G D (2000) The use of pin bearing data for the preliminary design of 'pinned' joints. NPL Report. CMMT(MN)052

Nottay, J; Tomlins, P E; Subotic, B (2000) Thermal cycling and the adhesion of glob tops. NPL Report. CMMT(A)287

Nottay, J S; Rides, M (2005) Methods for characterising surface tension of hot melt adhesives. NPL Report. DEPC-MN 013

O

Olusanya, A (1996) Experimental methods for the assessment of the cure of an adhesive. In: EURADH '96 - 3rd European Adhesion Conference, September 1996, Cambridge, UK.

Olusanya, A (1997) Project PAJ3 combined cyclic loading and hostile environments 1996-1999. Report 3. A guide to the use of design of experiment methods. NPL Report. CMMT(A)67

Olusanya, A (1996) A comparison of techniques for measuring the flow properties of one component filled epoxy adhesives. NPL Report. CMMT(A)19

R

Read, B E; Dean, G; Duncan, B C (1999) Project PAJ2. Report No 11. Strain rate and temperature dependence of the properties of adhesives. Prediction of high rate data. NPL Report. CMMT(A)169

Read, B E; Dean, G D; Ferriss, D H (2000) An elastic-plastic model for the non-linear mechanical behaviour of rubber-toughened adhesives. NPL Report. CMMT(A)289

Rides, M; Allen, C R G; Dawson, A; Duncan, B (2005) Measurement of the rheological properties of adhesives. NPL Report. DEPC-MPR 019

Rides, M; Allen, C R G; Dawson, A; Nottay, J S (2005) Surface tension and extrusion-based rheological characterisation of hot melt adhesives. Measurement Good Practice Guide. 81

Rides, M; Duncan, B (2005) Correlating physical properties of adhesives with process and bonding performance. NPL Report. DEPC-MPR 018

T

Tomlins, P E (2000) Global patent activity in electrically conductive adhesives. NPL Report. CMMT(A)270

Tomlins, P E; Levoguer, C (1999) An introduction to electrically conductive adhesives and their current applications. NPL Report. CMMT(A)243

Tomlins, P E; Nottay, J (2001) A method to measure the adhesive strength of glob tops to substrates. NPL Report. MATC(A)6

Twine, T J*; Broughton, W R (1999) The use of statistical methods for evaluating durability of adhesively bonded joints. NPL Report. CMMT(A)203

W

Wickham, M; Zou, L; Hunt, C P (2006) Measuring the effect on isotropic electrically conductive adhesive reliability of joint design characteristics. NPL Report. DEPC-MPR 045