- (2024) No longer available. NPL Report. MAT 129

Beake, B D; Goodes, S R; Zhang, H; Isern, L; Chalk, C; Nicholls, J R; Gee, M G (2024) Randomised nano-/micro- impact testing – a novel experimental test method to simulate erosive damage caused by solid particle impacts. Tribology International, 195. 109647

Fry, A T; Crocker, L E; Lodeiro, M J; Zhang, H; Poole, M; Woolliams, P; Koko, A; Breheny, C (2024) Development of an approach for measuring the tensile properties of additively manufactured lattice structures. NPL Report. MAT 127

Fry, A T; Crocker, L E; Woolliams, P; Poole, M; Koko, A; Breheny, C (2024) Tensile property measurement of AlSi10Mg lattice structures – from single strut to lattice networks. In: 10th International Conference on Advances in Materials, Manufacturing and Repair for Power Plants (AM-EPRI 2024), 15-18 October 2024, Bonita Springs, FL, USA.

Fry, T; Lodeiro, M (2024) Evaluation of Anisotropy in Additively Manufactured Materials Using Resonant Ultrasound Spectroscopy. Technical Report.

Koko, A; Becker, T H (2024) Mixed-mode fracture: Combination of Arcan fixture and stereo-DIC. Theoretical and Applied Fracture Mechanics Part B, 134. 104724

Koko, A; Bond, W; Simpson, R; Lodeiro, M; Mendieta, A; Sutton, G (2024) Investigating the Microstructural Evolution of Inconel 718 Under a Controlled Thermal Gradient. In: 10th International Conference on Advances in Materials, Manufacturing and Repair for Power Plants (AM-EPRI 2024), 15-18 October 2024, Bonita Springs, FL, USA.

Koko, A; Fry, A T; Mingard, K (2024) Uncertainties of in situ micromechanical testing of additive layer manufacturing (ALM) materials. NPL Report. MAT 128

Lowe, D; Machin, G (2024) Low uncertainty thermodynamic temperature above the silver point using relative primary radiometry. AIP Conference Proceedings, 3230. 100002

Sparasci, F; Risegari, L; Martin, C; Hermier, Y; Lopardo, G; Steur, P P M; Pearce, J V; Bunger, L; Rudtsch, S; de Bruin-Barendregt, C; Panman, M; Peruzzi, A; Hofstatter-Mohler, C; Turzo-Andras, E; Nedialkov, S; Spasova, S; Petrusova, O; Hernandez, M J M; del Campo Maldonado, D; Garcia Izquierdo, C; Strnad, R; Simic, S; Stepanovic, V; Nielson, J; Kokkini, E; Gaidamoviciute, L; Galkauskas, L; Mikalauskas, K; Kozicki, M; Zvizdic, D; Sestan, D; Mutapcic, N; Stratulat, C; Neagu, M D; Eusebio, L; Olsen, A A F; Bergerud, R A; Opel, K; Kvernmo, G; Hogstom, R; Heinonen, M; Bojkovski, J; Zuzek, V; MacLochlainn, D; Holmsten, M; Senn, R; Dobre, M; Pavlasek, P; Kalemci, M (2024) EURAMET.T-K9 Regional Key Comparison ITS-90 SPRT calibration from the Ar TP to the Zn FP. Metrologia, 61 (1A). 03005

Spetsieris, N; Lovelock, P; Shaw, R; Gower, M; Giannis, S (2024) Optimising grip designs for the tensile testing of fibre-reinforced polymer composites at cryogenic temperatures. In: ECCM21 21st European Conference on Composite Materials, 02-05 July 2024, Nantes, France.

Vincent, J D S; Yong, A X H; Gower, M; Giannis, S (2024) Ensuring measurement confidence in recycled carbon fibres. Proceedings of the 21st European Conference on Composite Materials, 7. pp. 78-83.

Yacoot, A (2024) Measurement Science and Technology’s second century underway. Measurement Science and Technology, 31 (1). 010201

Yamsiri, A; Duffy, D A; Machin, G; Sweeney, S J (2024) Active Photonic Thermometry using Quantum Well Heterostructures and Ring Resonators. AIP Conference Proceedings, 3230 (1). 110004