< back to main site

Publications

Items where Division is "Engineering" and Year is 2020

Up a level
Export as [feed] RSS
Group by: Authors | Item Type | No Grouping
Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | P | R | S | T | W | Y
Number of items: 41.

A

Alisic, S; Gutfeldt, B; Beaudoux, F; Bezjak, M; Coenegrachts, M; Davidson, S; Grgić, G; Hanrahan, R; van Geel, J L W A; Kacmaz, S; Mangutova-Stoilkovska, B; Miteva, M; Navrozidis, G; Neuvonen, P T; Nielsen, L; Ojanen-Saloranta, M; Pantić, D; Pärn, A; Popa, G F; Snopko, L; Spohr, I; Conceição, P; Stock, M; Vámossy, Cs; Wüthrich, C; Žandarova, T; Zelenka, Z; Zůda, J; AlQarni, S M (2020) Final report on EURAMET comparison on 1 kg stainless steel mass standards. Metrologia, 57 (1A). 07011 ISSN 0026-1394

Altıntaş, A; Koçaş, I; Durgut, Y; Bartolo, J; Bergoglio, M; Bermanec, L G; Bošnjaković, A; Burzić, S; Condereys, A; Dobre, M; Farar, P; Hetherington, P; Medina, N; Sabuga, W; Ott, O; Konczak, T; Sandu, I; Setina, J; Steindl, D; Vámossy, C; Waller, B; Wuethrich, C; Brzozowski, A; van Geel, J; Saxholm, S; Arrhén, F (2020) Final report on key comparison EURAMET.M.P-K1.c in the range 0.7 MPa to 7.0 MPa of gas gauge pressure. Metrologia, 57 (1A). -07022. 07022 ISSN 0026-1394

B

Bettin, H; Borys, M; Firlus, M; Buchner, C; Zelenka, Z; Medina, N; Parlić-Risović, T; Bezjak, M; Mitsas, C; Lefkopoulos, A; Lenard, E; Popa, G F; Malengo, A; Madec, T; Beaudoux, F; Fuchs, P; Marti, K; Wüthrich, C; Kajastie, H; Eltawil, A A; Fujii, K; Kuramoto, N; Waseda, A; Perkin, M; Davidson, S; Açadağ, Ü Y; Domostroev, A (2020) EURAMET key comparison 1031 (EURAMET.M.D-K1.1)—solid density comparison. Metrologia, 57 (1A). 07028 ISSN 0026-1394

Bridges, A; Yacoot, A; Kissinger, T; Tatam, R P (2020) Polarization-sensitive transfer matrix modeling for displacement measuring interferometry. Applied Optics, 59 (25). 7694 ISSN 1559-128X

Burt, S; de Podesta, M (2020) Response times of meteorological air temperature sensors. Quarterly Journal of the Royal Meteorological Society, 146 (731). pp. 2789-2800. ISSN 0035-9009

C

Clancy, A J; Anthony, D B; de Luca, F (2020) Metal Mimics: Lightweight, Strong, and Tough Nanocomposites and Nanomaterial Assemblies. ACS Applied Materials & Interfaces, 12 (14). pp. 15955-15975. ISSN 1944-8244

Coveney, T (2020) A review of state-of-the-art 1D length scale calibration instruments. Measurement Science and Technology, 31 (4). 042002 ISSN 0957-0233

Coveney, T; Matus, M; Wang, S; Byman, V; Lassila, A; Alqahtani, N; Alqahtani, F; Sumner, D; Spiller, J; Meli, F; Picotto, G B; Bellotti, R; Sato, O; Sharma, R; Moona, G; Kumar, V; Rodríguez, J; Prieto, E; Meral, İ; Ganioğlu, O; Salgado, J; Wójtowicz, A; Skalník, P; Zelený, V; Stoup, J; Kotte, G; Koops, R; Arizmendi, E; Wang, W; Jakobsson, A; Duta, A; Dugheanu, E; Reain, G; Szikszai, G (2020) Calibration of 1-D CMM artefacts: step gauges (EURAMET.L-K5.2016). Metrologia, 57 (1A). 04002 ISSN 0026-1394

D

D'Souza, N; Roebuck, B; Collins, D M; West, G D; Panwisawas, C (2020) Relating micro-segregation to site specific high temperature deformation in single crystal nickel-base superalloy castings. Materials Science and Engineering: A, 773. 138862 ISSN 09215093

Domun, N; Paton, K R; Blackman, B R K; Kaboglu, C; Vahid, S; Zhang, T; Dear, J P; Kinloch, A J; Hadavinia, H (2020) On the extent of fracture toughness transfer from 1D/2D nanomodified epoxy matrices to glass fibre composites. Journal of Materials Science, 55 (11). pp. 4717-4733. ISSN 0022-2461

F

Flay, N; Brown, S; Sun, W; Blumensath, T; Su, R (2020) Effects of off-focal radiation on dimensional measurements in industrial cone-beam micro-focus X-ray computed tomography systems. Precision Engineering, 66. pp. 472-481. ISSN 01416359

G

Garnæs, J; Nečas, D; Nielsen, L; H Madsen, M; Torras-Rosell, A; Zeng, G; Klapetek, P; Yacoot, A (2020) Algorithms for using silicon steps for scanning probe microscope evaluation. Metrologia, 57 (6). 064002 ISSN 0026-1394

Gu, T; Tong, V S; Gourlay, C M; Britton, T B (2020) In-situ study of creep in Sn-3Ag-0.5Cu solder. Acta Materialia, 196. pp. 31-43. ISSN 13596454

H

Hajikazemi, M.; McCartney, L. N.; Van Paepegem, W. (2020) Matrix cracking initiation, propagation and laminate failure in multiple plies of general symmetric composite laminates. Composites Part A: Applied Science and Manufacturing, 136. 105963 ISSN 1359835X

Hay, B; Zarr, R; Stacey, C; Sokolov, N; Cortés, L L; Zhang, J; Hammerschmidt, U; Filtz, J R; Allard, A (2020) CCT Supplementary comparison S2 on thermal conductivity measurements of insulating materials by guarded hot plate. Metrologia, 57 (1A). 03003 ISSN 0026-1394

Heaps, E; Yacoot, A; Dongmo, H; Picco, L; Payton, O D; Russell-Pavier, F; Klapetek, P (2020) Bringing real-time traceability to high-speed atomic force microscopy. Measurement Science and Technology, 31 (7). 074005 ISSN 0957-0233

Hernández-Rodríguez, P; Valerio-Rodríguez, M F; Abarca-Paredes, W A; Zhang, H; Ordaz-Hernández, K; López-Honorato, E (2020) Polymer-derived SiC/C/Al environmental barrier coatings on carbon steel. Advances in Applied Ceramics, 119 (8). pp. 456-461. ISSN 1743-6753

Hou, X D; Zhang, H X; Seraffon, M; Fry, A T (2020) Steam oxidation and mechanical performance of a ferritic–martensitic steel with slurry aluminide coating. Materials and Corrosion, 71 (8). pp. 1310-1320. ISSN 0947-5117

I

Iakovakis, E; Roy, M J; Gee, M G; Matthews, A (2020) Evaluation of wear mechanisms in additive manufactured carbide-rich tool steels. Wear, 462-46. 203449 ISSN 00431648

J

Jablon, B.M; Mingard, K.; Winkelmann, A.; Naresh-Kumar, G.; Hourahine, B.; Trager-Cowan, C. (2020) Subgrain structure and dislocations in WC-Co hard metals revealed by electron channelling contrast imaging. International Journal of Refractory Metals and Hard Materials, 87. 105159 ISSN 02634368

Jayawardena, K. D. G. I.; Bandara, R. M. I.; Monti, M.; Butler-Caddle, E.; Pichler, T.; Shiozawa, H.; Wang, Z.; Jenatsch, S.; Hinder, S. J.; Masteghin, M. G.; Patel, M.; Thirimanne, H. M.; Zhang, W.; Sporea, R. A.; Lloyd-Hughes, J.; Silva, S. R. P. (2020) Approaching the Shockley–Queisser limit for fill factors in lead–tin mixed perovskite photovoltaics. Journal of Materials Chemistry A, 8 (2). pp. 693-705. ISSN 2050-7488

K

Klapetek, P; Yacoot, A; Hortvík, V; Duchoň, V; Dongmo, H; Řeřucha, Š; Valtr, M; Nečas, D (2020) Multiple-fibre interferometry setup for probe sample interaction measurements in atomic force microscopy. Measurement Science and Technology, 31 (9). 094001 ISSN 0957-0233

Knott, A J; Robinson, I A (2020) Dynamic characterisation of pressure transducers using shock tube methods. Transactions of the Institute of Measurement and Control, 42 (4). pp. 743-748. ISSN 0142-3312

L

Li, Z; Koval, V; Mahajan, A; Gao, Z; Vecchini, C; Stewart, M; Cain, M G; Tao, K; Jia, C; Viola, G; Yan, H (2020) Room-temperature multiferroic behavior in layer-structured Aurivillius phase ceramics. Applied Physics Letters, 117 (5). 052903 ISSN 0003-6951

M

Merlone, A.; Coppa, G.; Bassani, C.; Bonnier, G.; Bertiglia, F.; Dedyulin, S.; Favreau, J-O.; Fernicola, V.; van Geel, J.; Georgin, E.; Gotoh, M.; Krenek, S.; Iacomini, L.; Joung, W.; Machin, G.; Marcarino, P.; McEvoy, H.; Musacchio, C.; Pearce, J.V.; Rudtsch, S.; Sadli, M.; Tamba, J.; Woods, D.; Yan, X. (2020) Gas-controlled heat pipes in metrology: More than 30 years of technical and scientific progresses. Measurement, 164. 108103 ISSN 02632241

N

Naresh-Kumar, G.; Alasmari, A.; Kusch, G.; Edwards, P.R.; Martin, R.W.; Mingard, K.P.; Trager-Cowan, C. (2020) Metrology of crystal defects through intensity variations in secondary electrons from the diffraction of primary electrons in a scanning electron microscope. Ultramicroscopy, 213. 112977 ISSN 03043991

P

Pearce, J V (2020) A validated physical model of the thermoelectric drift of Pt-Rh thermocouples above 1200 °C. Metrologia, 57 (2). 025009 ISSN 0026-1394

Pearce, J V; Tucker, D; Rawal, R; Hutton, L (2020) Stability assessment of a new high strength, high temperature Type R and Type S thermocouple. Measurement Science and Technology, 31 (4). 044005 ISSN 0957-0233

Pemberton, R; Edser, D; Gower, M (2020) Optimisation of Acid Digestion Conditions for Volume Fraction Measurements of Hard to Digest Fibre-Reinforced Polymer Composites. NPL Report. MN 12

Petrova, N. L.; Donaldson, N. K.; Tang, W.; MacDonald, A.; Allen, J.; Lomas, C.; Leech, N.; Ainarkar, S.; Bevans, J.; Plassmann, P.; Kluwe, B.; Ring, F.; Whittam, A.; Rogers, L.; McMillan, J.; Simpson, R.; Donaldson, A. N. A.; Machin, G.; Edmonds, M. E. (2020) Infrared thermography and ulcer prevention in the high‐risk diabetic foot: data from a single‐blind multicentre controlled clinical trial. Diabetic Medicine, 37 (1). pp. 95-104. ISSN 0742-3071

R

Rivas Santos, V M; Thompson, A; Sims-Waterhouse, D; Maskery, I; Woolliams, P; Leach, R (2020) Design and characterisation of an additive manufacturing benchmarking artefact following a design-for-metrology approach. Additive Manufacturing, 32. 100964 ISSN 22148604

S

Sanz, C.; Morantz, P.; Lunt, A.J.G.; Shore, P.; Chérif, A.; Schneider, J.; Mainaud-Durand, H.; Steffens, N. (2020) Evaluation of the performance variation of porous air pads on discontinuous surfaces. Precision Engineering, 62. pp. 16-22. ISSN 01416359

Smith, D; Peters, D; Nightingale, T; Pearce, J; Veltcheva, R (2020) Challenges for In-Flight Calibration of Thermal Infrared Instruments for Earth Observation. Remote Sensing, 12 (11). 1832 ISSN 2072-4292

Stock, M; Conceição, P; Fang, H; Bielsa, F; Kiss, A; Nielsen, L; Kim, D; Kim, M; Lee, K -C; Lee, S; Seo, M; Woo, B -C; Li, Z; Wang, J; Bai, Y; Xu, J; Wu, D; Lu, Y; Zhang, Z; He, Q; Haddad, D; Schlamminger, S; Newell, D; Mulhern, E; Abbott, P; Kubarych, Z; Kuramoto, N; Mizushima, S; Zhang, L; Fujita, K; Davidson, S; Green, R G; Liard, J O; Murnaghan, N F; Sanchez, C A; Wood, B M; Bettin, H; Borys, M; Mecke, M; Nicolaus, A; Peter, A; Müller, M; Scholz, F; Schofeld, A (2020) Report on the CCM key comparison of kilogram realizations CCM.M-K8.2019. Metrologia, 57 (1A). 07030 ISSN 0026-1394

T

Takeda, N; Carroll, P; Tsukahara, Y; Beardmore, S; Bell, S; Yamanaka, K; Akao, S (2020) Trace moisture measurement in natural gas mixtures with a single calibration for nitrogen background gas. Measurement Science and Technology, 31 (10). 104007 ISSN 0957-0233

Trager-Cowan, C; Alasmari, A; Avis, W; Bruckbauer, J; Edwards, P R; Hourahine, B; Kraeusel, S; Kusch, G; Jablon, B M; Johnston, R; Martin, R W; Mcdermott, R; Naresh-Kumar, G; Nouf-Allehiani, M; Pascal, E; Thomson, D; Vespucci, S; Mingard, K; Parbrook, P J; Smith, M D; Enslin, J; Mehnke, F; Kneissl, M; Kuhn, C; Wernicke, T; Knauer, A; Hagedorn, S; Walde, S; Weyers, M; Coulon, P-M; Shields, P A; Zhang, Y; Jiu, L; Gong, Y; Smith, R M; Wang, T; Winkelmann, A (2020) Advances in electron channelling contrast imaging and electron backscatter diffraction for imaging and analysis of structural defects in the scanning electron microscope. IOP Conference Series: Materials Science and Engineering, 891. 012023 ISSN 1757-899X

W

Wang, H; Li, Yanan; Gee, M G; Zhang, H; Liu, X; Song, X (2020) Sliding wear resistance enhancement by controlling W2C precipitation in HVOF sprayed WC-based cermet coating. Surface and Coatings Technology, 387. 125533 ISSN 02578972

Wang, H; Qiu, Q; Gee, M; Hou, C; Liu, X; Song, X (2020) Wear resistance enhancement of HVOF-sprayed WC-Co coating by complete densification of starting powder. Materials & Design, 191. 108586 ISSN 02641275

Wen, J; Li, K; Gong, Y; Copner, B; Hughes, B; Campbell, M A; Lazzaini, M; Duan, L; Ma, C; Fan, W; Jia, Z; Fu, H; Copner, N (2020) Numerical investigation of on-chip wavelength conversion based on InP/In1−xGaxAsyP1−y semiconductor waveguide platforms. Optics Communications, 473. 125921 ISSN 00304018

Winklemann, A; Jablon, B M; Tong, V S; Troger-Cowan, C; Mingard, K P (2020) Improving EBSD precision by orientation refinement with full pattern matching. Journal of Microscopy, 277 (2). pp. 79-92. ISSN 0022-2720

Y

Yacoot, A; Bosse, H; Dixson, R (2020) The lattice parameter of silicon: a secondary realisation of the metre. Measurement Science and Technology, 31 (12). 121001 ISSN 0957-0233

This list was generated on Wed Oct 20 08:05:50 2021 BST.