< back to main site

Publications

Items where Author is "Dean, G D"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 34.

Report/Guide

Dean, G D; McCartney, L N; Crocker, L E; Mera, R D (2009) Modelling the long-term deformation behaviour of polymers for finite element analysis. NPL Report. MAT 31

Dean, G D; McCartney, L N; Crocker, L E; Mera, R D (2008) Modelling the long-term deformation behaviour of polymers for finite element analysis. NPL Report. MAT 22

Broughton, W R; Dean, G D (2007) Fatigue and creep testing of adhesives and thermoplastic joined systems. Measurement Good Practice Guide. 104

Dean, G D (2006) Modelling non-linear creep behaviour of an epoxy adhesive. NPL Report. DEPC-MPR 052

Dean, G D; Crocker, L E (2006) Prediction of the impact performance of plastics mouldings. NPL Report. DEPC-MPR 043

Dean, G D; Crocker, L E (2006) Prediction of the impact performance of plastics using finite element methods. Measurement Good Practice Guide. 87

Tomlins, P; Petrie, H*; King, N*; Crocker, L E; Gee, M G; Dean, G D; Rides, M (2006) Predicting and measuring the feel of soft-touch thermoplastic elastomers. Measurement Good Practice Guide. 86

Crocker, L E; Dean, G D; Tomlins, P E (2005) A method for predicting the perceived hardness of soft-touch elastomeric coatings and over-mouldings. NPL Report. DEPC-MPR 035

Dean, G D; Mera, R D (2005) Measurement of failure in tough plastics at high strain rates. NPL Report. DEPC-MN 028

Tomlins, P E; Rides, M; Dawson, A; Gee, M G; Dean, G D; Hobbs, C B; Allen, C R G; Gnaniah, S J P; Calver, A; Darling, R (2005) Physical characterisation of soft-touch polymers. NPL Report. DEPC-MPR 025

Maxwell, A S; Broughton, W R; Dean, G D; Sims, G D (2005) Review of accelerated ageing methods and lifetime prediction techniques for polymeric materials. NPL Report. DEPC-MPR 016

Dean, G D; Broughton, W R (2005) A review of creep modelling for toughened adhesives and thermoplastics. NPL Report. DEPC-MPR 011

Dean, G D; Mera, R D (2004) Determination of material properties and parameters required for the simulation of impact performance of plastics using finite element analysis. NPL Report. DEPC-MPR 007

Dean, G D; Mera, R D (2004) Modelling creep in toughened epoxy adhesives for finite element analysis. NPL Report. DEPC-MPR 003

Dean, G D; Broughton, W R (2002) Models for predicting deformation and failure in adhesives and polymer matrix composites. NPL Report. MATC(A)68

Dean, G D; Crocker, L E (2001) The use of finite element methods for design with adhesives. Measurement Good Practice Guide. 48

Dean, G D; Crocker, L E (2001) Analysis of joint tests on an epoxy adhesive. NPL Report. MATC(A)40

Read, B E; Dean, G D; Wright, L* (2001) Effects of cavity growth and orientation hardening on the stress.strain behaviour of rubber-toughened plastics. NPL Report. MATC(A)35

Crocker, L E; Dean, G D (2001) Tensile testing of adhesive butt-joint specimens. NPL Report. MATC(MN)09

Tomlins, P E; Yazici, M*; Dean, G D (2000) On the determination of stress-strain curves under biaxial loading conditions. NPL Report. CMMT(A)298

Read, B E; Dean, G D; Wright, L (2000) A proposed model for the non-linear stress/strain behaviour of rubber-toughened plastics. NPL Report. CMMT(A)301

Read, B E; Dean, G D; Ferriss, D H (2000) An elastic-plastic model for the non-linear mechanical behaviour of rubber-toughened adhesives. NPL Report. CMMT(A)289

Dean, G D; Shastri, R* (2000) Committee draft for an ISO guide to the acquisition and presentation of design data for plastics. NPL Report. CMMT(A)256

Dean, G D (1997) Adhesives - determination of shear behaviour of structural bonds part 2: thick-adherend tensile-test method. NPL Report. CMMT(A)81

Read, B E; Dean, G D; Tomlins, P E (1993) Modelling of creep data for plastics. NPL Report. DMM(A)92

Tomlins, P E; Read, B E; Dean, G D (1993) The effect of temperature on creep and physical aging of PVC. NPL Report. DMM(A)93

Dean, G D; Tomlins, P E; Read, B E (1993) A model for non-linear creep and physical ageing in PVC. NPL Report. DMM(A)91

Article

Dean, G D (2011) Modelling and analysis of creep data for plastics at elevated temperatures. Polym. Test., 30 (2). pp. 229-235.

Dean, G D; McCartney, L N; Mera, R D; Urquhart, J M (2011) Modelling non-linear viscoelasticity in polymers for design using finite element analysis. Polym. Eng. Sci., 51 (11). pp. 2210-2219.

Dean, G D; McCartney, L N; Crocker, L E; Mera, R D (2009) Modelling the long-term deformation behaviour of polymers for finite element analysis. Plast. Rubber Compos., 38 (9-10). pp. 433-443.

Dean, G D; Broughton, W R (2008) A model for non-linear creep in polypropylene. Polym. Test., 26. pp. 1068-1081.

Dean, G D; Crocker, L E; Read, B; Wright, L (2004) Prediction of deformation and failure of rubber-toughened adhesive joints. International Journal of Adhesives and Adhesion, 24 (4). pp. 295-306.

Dean, G D; Tomlins, P E; Read, B E (1995) A model for nonlinear creep and physical ageing in poly vinyl chloride. Polym. Eng. Sci., 35 (16). pp. 1282-1289.

Dean, G D; Tomlins, P E; Read, B E (1995) A model for nonlinear creep and physical aging in poly(vinyl chloride). Polm. Eng. Sci., 35 (16). pp. 1282-1289.

This list was generated on Sun Oct 24 07:07:02 2021 BST.