Report/Guide

Osgerby, S; Banks, J P (2006) Experimental aspects of small punch testing at elevated temperatures. NPL Report. DEPC-MPE 029

Nunn, J W; Banks, J P; Chunnilall, C J; Saunders, S R J (2004) Factors affecting fluorescence of thermally grown oxide in the presence of a thermal barrier coating. NPL Report. DEPC-MPE 006

Osgerby, S; Nunn, J W; Banks, J P; Maxwell, A S; Aldrich-Smith, G (2003) Young's Modulus measurement for coatings used in gas turbines. NPL Report. MATC(MN)54

Saunders, S R J; Banks, J P (2002) An evaluation of thermal barrier coated specimens exposed to long-term ageing tests. NPL Report. MATC(A)113

Saunders, S R J; Banks, J P (2001) Development of a test procedure for the measurement of thermal fatigue resistance of coatings. NPL Report. MATC(A)61

Saunders, S R J; Banks, J P; Wright, M (2001) Measurement of ductile brittle transition temperature of coatings using the small punch test. NPL Report. MATC(A)60

Saunders, S R J; Banks, J P; Chunnilall, C J (2001) An evaluation of tests for the adhesion of thermal barrier coatings. NPL Report. MATC(A)59

Osgerby, S; Saunders, S R J; Banks, J P; Gohil, D D (1998) Mechanical properties of high temperature corrosion scales on materials for high temperature heat exchangers. WP13, project UK5, final report to cost 501. NPL Report. CMMT(A)139

Saunders, S R J; Osgerby, S; Banks, J P; Sheriff, M U (1998) Code of practice for characterising gas turbine blade coatings. NPL Report. CMMT(A)132

Osgerby, S; Saunders, S R J; Evans, H E*; Gohil, D D; Banks, J P (1998) Lifetime prediction of high temperature components: breakdown of the protective oxide scale. NPL Report. CMMT(A)131

Saunders, S R J; Banks, J P (1998) Ductile brittle transition temperature (DBTT) measurement of coatings used in gas turbines. NPL Report. CMMT(MN)028

Saunders, S R J; Banks, J P (1998) Measurement of thermal mechanical fatigue (TMF) resistance of coatings used in gas turbines. NPL Report. CMMT(MN)029

Osgerby, S; Saunders, S R J; Banks, J P (1998) Scale and coating adhesion: a procedure for laboratory tests. NPL Report. CMMT(MN)026

Article

Fry, A T; Banks, J P; Nunn, J; Brown, L J (2008) Comparison of the thermal cycling performance of thermal barrier coatings under isothermal and heat flux conditions. Mater. Sci. Forum, 595-59. pp. 77-85.

Banks, J P; Gohil, D D; Saunders, S R J; Osgerby, S; Evans, H E*; Dooley, R B* (1997) Oxide scale cracking: Kinetic studies using crack decoration and acoustic emission techniques. Microscopy of Oxidation 3, 675. pp. 330-338.

Conference or Workshop Item

Shafirstein, G; Saunders, S R J; Banks, J P (1995) Adhesion testing of TiN coatings. In: Sudarshon, T S and Jeandin, M eds. Surface modification technologies VIII. Institute of Materials, 1995.

Book Chapter/Section

Banks, J P; Gohil, D D; Evans, H E*; Hall, D J; Saunders, S R J (1994) The room-temperature mechanical properties of alumina scales. In: Coutsouradis, D, et al, eds. Materials for advanced power engineering: part 2. Klewer Academic Publishers, pp. 1543-1552.