Marshall, H; Selvan, T; Ahmad, R; Bento, M; Veiga, C; Sands, G; Malone, C; King, R B; Clark, C H; McGarry, C K (2023) Evaluation of a novel phantom for the quality assurance of a six-degree-of-freedom couch 3D-printed at multiple centres. Physica Medica, 114. 103136 ISSN 11201797

Preview

Text eid10386.pdf - Published Version Available under License Creative Commons Attribution. Download (9MB) | Preview

Abstract

This study aimed to validate a bespoke 3D-printed phantom for use in quality assurance (QA) of a 6 degrees-of-freedom (6DoF) treatment couch. A novel phantom design comprising a main body with internal cube structures, was fabricated at five centres using Polylactic Acid (PLA) material, with an additional phantom produced incorporating a PLA-stone hybrid material. Correctional setup shifts were determined using image registration by 3D-3D matching of high HU cube structures between obtained cone-beam computer tomography (CBCT) images to reference CTs, containing cubes with fabricated rotational offsets of 3.5°, 1.5° and −2.5° in rotation, pitch, and roll, respectively. Average rotational setup shifts were obtained for each phantom. The reproducibility of 3D-printing was probed by comparing the internal cube size as well as Hounsfield Units between each of the uniquely produced phantoms. For the five PLA phantoms, the average rot, pitch and roll correctional differences from the fabricated offsets were −0.3 ± 0.2°, −0.2 ± 0.5° and 0.2 ± 0.3° respectively, and for the PLA hybrid these differences were −0.09 ± 0.14°, 0.30 ± 0.00° and 0.03 ± 0.10°. There was found to be no statistically significant difference in average cube size between the five PLA printed phantoms, with the significant difference (P < 0.05) in HU of one phantom compared to the others attributed to setup choice and material density. This work demonstrated the capability producing a novel 3D-printed 6DoF couch QA phantom design, at multiple centres, with each unique model capable of sub-degree couch correction

Item Type:	Article
Keywords:	6DoF, 3D-printing, Six-degrees-of-freedom, Quality assurance
Subjects:	Ionising Radiation > Dosimetry
Divisions:	Medical, Marine & Nuclear
Identification number/DOI:	10.1016/j.ejmp.2023.103136
Last Modified:	11 May 2026 12:58
URI:	https://eprintspublications.npl.co.uk/id/eprint/10386