< back to main site

Publications

Items where Subject is "Engineering Measurements > Thermal"

Up a level
Export as [feed] RSS
Group by: Authors | Item Type
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items at this level: 404.

A

Actis, A*; Bell, S A; Benyon, R*; Cretinon, B*; de Groot, M*; Heinonen, M*; Scholz, G*; Steiner, A* (1998) The use of a humid air generator as a reference method for measuring humidity. In: Proc. Third International Symposium on Humidity and Moisture., April 1998, London, UK.

Anhalt, K*; Hartmann, J*; Lowe, D; Machin, G; Sadli, M*; Yamada, Y* (2006) Thermodynamic temperature determination of Co-C. Pd-C, Pt-C and Ru-C eutectic fixed-point cells. Metrologia, 43 (2). S78-83

Anhalt, K*; Machin, G (2016) Thermodynamic temperature by primary radiometry. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150041

B

Babourina-Brooks, B*; Simpson, R; Arvanitis, T N*; Machin, G; Peet, A C*; Davies, N P* (2015) MRS thermometry calibration at 3T: effects of protein, ionic concentration and magnetic field strength. MNR in Biomed., 28 (7). pp. 792-800.

Bacon, D R; Shaw, A (1993) Experimental validation of predicted temperature rises in tissue-mimicking materials. Phys. Med. Biol., 38. pp. 1647-1659.

Battuello, M*; Chimenti, V*; Machin, G; McEvoy, H C; Perez, J*; Ricolfi, T*; Sergienko, R* (2001) A comparison of the primary standard zinc point blackbody cavities of NPL and CEM with IMGC. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Battuello, M*; Florio, M*; Machin, G (2011) Investigations at INRIM on a Pd-C cell manufactured by NPL. Metrologia, 48 (5). pp. 241-245.

Bell, S A (2007) Humidity measurement and applications - an introduction. Meas. Control, 40 (9). p. 267.

Bell, S A (1999) Study of conceptual design for flow-mixing stage of low-range humidity standard generator. NPL Report. CMAM 39

Bell, S A (1998) Validation of the NPL primary gravimetric hygrometer. In: Proc. Third international symposium on humidity and moisture., April 1998, London, UK.

Bell, S A (2013) The beginner's guide to humidity measurement. Measurement Good Practice Guide. 124

Bell, S A (1996) A guide to the Measurement of Humidity. Technical Report. NPL, Teddington.

Bell, S A (1998) A study of the requirements for standards for the measurement of moisture in solid materials. NPL Report. CMAM 20

Bell, S A (1995) A survey to assess the industrial requirement for a code of practice for humidity measurement. NPL Report. MOM 124

Bell, S A; Benyon, R*; Böse, N*; Heinonen, M* (2008) A roadmap for humidity and moisture measurement. Int. J. Thermophysics, 29 (5). pp. 1537-1543.

Bell, S A; Boese, N*; Bosma, R*; Buzoianu, M*; Carroll, P; Fernicola, V*; Georgin, E*; Heinonen, M*; Kentved, A*; Melvad, C*; Nielsen, J* (2015) Status and strategy for moisture metrology in European metrology institutes. Int. J. Thermophysics, 36 (8). pp. 2185-2198.

Bell, S A; Boyes, S J (2001) An assessment of experimental data that underpin formulae for water vapour enhancement factor. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Bell, S A; Carroll, P; Stevens, M (2009) Study of the need for improved traceability for air temperature measurements - summary report. NPL Report. ENG 11

Bell, S A; Carroll, P; Stevens, M (2009) Study of the need for traceability for humidity measurements above 100 °C - summary report. NPL Report. ENG 12

Bell, S A; Carroll, P A; Beardmore, S L; England, C*; Mander, N* (2017) A methodology for study of in-service drift of meteorological humidity sensors. Metrologia, 54 (3). S63-S73

Bell, S A; Gardiner, T; Stevens, M; Waterfield, K* (2002) Evaluation of trace moisture sensors - interim report. NPL Report. CBTLM 19

Bell, S A; Hinds, G; de Podesta, M; Stevens, M; Wilkinson, J (2012) Humidity, pressure and temperature measurements in an interdigitated-flow PEM hydrogen fuel cell. Int. J. Thermophysics, 33 (8-9). pp. 1583-1594.

Bell, S A; Miao, P; Carroll, P A (2018) Novel calibration technique for a coulometric evolved vapor analyzer for measuring water content of materials. International Journal of Thermophysics, 39 (4). 50

Bell, S A; Scott, M* (1995) A code of practice for humidity measurement. Meas. Control, 28 (May). 106 - 108

Bell, S A; Stevens, M; Barwood, G P; Edwards, C S; Gill, P (2001) Evaluation of a tuneable diode laser absorption spectrometer against the NPL low frost-point generator. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Bell, S A; Stevens, M*; Abe, H*; Benyon, R*; Bosma, R*; Fernicola, V*; Heinonen, M*; Huang, P*; Kitano, H*; Li, Z*; Nielsen, J*; Ochi, N*; Podmurnaya, O A*; Scace, G*; Smorgon, D*; Vicente, T*; Vinge, A F*; Wang, L*; Yi, H* (2015) Final report on CCT-K6: comparison of local realisations of dew-point temperature scales in the range -50 ºC to +20 ºC. Metrologia, 52 (1A). 03005.

Bloembergen, P*; Battuello, M*; Girard, F*; Machin, G; Wright, L (2016) On the correction of the melting curve of the eutectic Co-C for the effect of the thermal inertia of the furnace. Int. J. Thermophysics, 37 (4). p. 44.

Bloembergen, P*; Battuello, M*; Girard, F*; Machin, G; Wright, L (2015) On the influence of the furnace and cell conditions on the phase transition of the eutectic Co-C. Int. J. Thermophysics, 36 (8). pp. 1859-1887.

Bloembergen, P*; van der Ham, E W M*; Machin, G; Schrama, C* (2001) A study on the instrument-oriented characterisation of low temperature radiation thermometers. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Bojkovski, J*; Fischer, J*; Machin, G; Pavese, F*; Peruzzi, A*; Renaot, E*; Tegeler, E* (2009) A roadmap for thermal metrology. Int. J. Thermophysics, 30 (1). pp. 1-8.

Boumaza, T; Redgrove, J (2003) Use of the transient plane source technique for rapid multiple thermal property measurements. Int. J. Thermophysics, 24 (2). pp. 501-12.

Boyes, S J; Bell, S A (1999) Assessment of fundamental data used in humidity metrology. NPL Report. CMAM 42

Bramley, P*; Cruickshank, D*; Pearce, J (2017) The development of a practical, drift free, Johnson-noise thermometer for industrial applications. Int. J. Thermophysics, 38 (2). p. 25.

Broussely, M; Levick, A P; Edwards, G J (2005) Simultaneous measurement of temperature, thermal diffusivity, thermal conductivity and spectral emissivity by photothermal radiometry. J. Phys. IV, Proc., 125. pp. 627-630.

Broussely, M; Levick, A P; Edwards, G J (2005) Survey of applications for LART (Th 3.1.1.01). NPL Report. DEPC-TH 008

Broussely, M*; Levick, A P; Edwards, G J (2005) A novel comparative photothermal method for measuring thermal diffusivity. Int. J. Thermophysics, 26 (1). pp. 221-232.

Brown, E; Hao, L; Cox, D C; Gallop, J C (2008) Scanning thermal microscopy probe capable of simultaneous electrical imaging and the addition of a diamond tip. J. Phys., Conf. Ser., 100 (5). 052012

C

Carroll, P A; Bell, S A (2012) Consultation on the use of certified reference materials for the calibration of moisture measurement instrumentation. NPL Report. ENG 40

Carroll, P A; Bell, S A (2008) Needs for NMS support for measurements of moisture in materials. NPL Report. ENG 7

Carroll, P A; Bell, S A; Maxwell, A S; Tomlins, P E (2012) Non-destructive moisture content measurement of bioabsorbable polymers used in medical implants. Int. J. Thermophysics, 33 (8-9). pp. 1650-1660.

Carroll, P A; Bell, S A; Stevens, M (2010) Calibration issues for measurement of moisture in materials. NPL Report. ENG 21

Carroll, P A; Bell, S A; Stevens, M (2015) A calibration facility for dew point in air up to 1 Mpa. Int. J. Thermophysics, 36 (12). pp. 3453-3465.

Castro, P*; Machin, G; Bloembergen, P*; Lowe, D; Whittam, A* (2014) Thermodynamic temperatures of high-temperature fixed points: uncertainties due to temperature drop and emissivity. Int. J. Thermophysics, 35 (6-7). pp. 1341-1352.

Castro, P*; Machin, G; Pearce, J V (2013) Thermal modelling comparing high temperature fixed point measurements by contact and non-contact thermometry. AIP Conf. Proc., 1552. pp. 358-362.

Castro, P*; Machin, G; Villamanan, M A*; Lowe, D (2011) Calculation of the temperature drop for high temperature fixed points for different furnace conditions. Int. J. Thermophysics, 32 (7-8). pp. 1773-1785.

Chattle, M V; Butler, J (1994) BIPM project: intercomparison of water triple point cells. NPL Report. QU 104

Chattle, M V; Butler, J (1994) EUROMET Project No.278: intercomparison of water triple-point cells. NPL Report. QU 101

Childs, C*; Machin, G (2009) Reliability issues in human brain temperature measurement. Critical Care, 13 (4). R106.

Childs, C*; Wieloch, T*; Lecky, F*; Machin, G; Harris, G*; Stocchetti, N (2010) Report of a consensus meeting on human brain temperature after severe traumatic brain injury: its measurement and management during pyrexia. Frontiers in Neurotrauma, 1. Article 146

Chu, B; Machin, G (1996) Recent developments in low temperature non-contact thermometry at the NPL. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Chu, B; Machin, G (1996) An evaluation of infrared thermometers by the intercomparison of standard blackbody sources. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Chu, B; Machin, G (1999) A low-temperature blackbody reference source to -40oC. Meas. Sci. Technol., 10 (1). pp. 1-6.

Chu, B; McEvoy, H C; Andrews, J W (1994) The NPL reference sources of blackbody radiation. Meas. Sci. Technol., 5 (1). pp. 12-19.

Chug, B; McEvoy, H C; Machin, G (2003) Use of an InGaAs radiation thermometer to verify the accuracy of the NPL blackbody reference sources from 156 ºC to 600 ºC. AIP Conf. Proc., 684 (2). pp. 571-576.

Clark, J; Tye, R (2003) Thermophysical properties reference data for some key engineering alloys. High Temp.-High Press., 35-36 (1). pp. 1-14.

D

Davies, H; Gray, J; Quested, P N; Head, D I; Pearce, J; de Podesta, M (2007) The freezing behaviour of high purity elements for realising the international temperature scale. In: SP07 Proceedings of the 5th International Conference on Solidification Processing, 23-25 July 2007, Sheffield, UK.

Dong, W; Lowe, D; Machin, G; Bloembergen, P*; Wang, T*; Lu, X* (2017) Investigation of the furnace effect in cobalt-carbon high temperature fixed point cells. Measurement, 106. pp. 88-94.

Dong, W*; Lowe, D H; Lu, X*; Machin, G; Yuan, Z*; Wang, T*; Bloembergen, P*; Xiao, C* (2013) Bilateral ITS-90 comparison at WC-C peritectic fixed point between NIM and NPL. AIP Conf. Proc., 1552. pp. 786-790.

Dong, W*; Machin, G; Bloembergen, P*; Lowe, D; Wang, T* (2016) Investigation of ternary and quaternary high-temperature fixed-point cells, based on platinum-carbon-X, as blind comparison artefacts. Meas. Sci. Technol., 27 (11). 115010

da Silva, R; Pearce, J V; Machin, G (2017) A systematic evaluation of contemporary impurity correction methods in ITS-90 aluminium fixed point cells. Metrologia, 54 (3). pp. 365-380.

da Silva, R*; Veltcheva, R I; Gray, J; Pearce, J V; Machin, G; Teixeira, R N* (2013) Bilateral comparison of tim fixed point cells between INMETRO and NPL. AIP Conf. Proc., 1552. pp. 777-781.

de Podesta, M (2013) Absolutely freezing. New Scientist, 218 (2922). pp. 42-45.

de Podesta, M (2012) Climate change. Chemistry and Industry, 76 (12). pp. 24-27.

de Podesta, M (2012) In response to climate sceptics. Chemistry & Industry (5). On-line

de Podesta, M (2014) Practical acoustic thermometry. Nucl. Eng. Int., 59 (715). pp. 26-29.

de Podesta, M (2013) Redefining temperature. Phys. World, 26 (8). pp. 28-32.

de Podesta, M (2016) Rethinking the kelvin. Nature Physics, 12 (1). p. 104.

de Podesta, M (2009) What goes up ... Phys. World, 22 (2). pp. 20-21.

de Podesta, M (2014) The redefinition of the kelvin. Meas. Control, 47 (10). pp. 323-328.

de Podesta, M; Bell, S; Underwood, R (2018) Air temperature sensors: dependence of radiative errors on sensor diameter in precision metrology and meteorology. Metrologia, 55 (2). pp. 229-244.

de Podesta, M; Edwards, G J (2008) The limits of a rayleigh scattering primary thermometer. Int. J. Thermophysics, 29 (5). pp. 1719-1729.

de Podesta, M; Harris, P M; Underwood, R; Sutton, G; Mark, D F*; Stuart, F*; Morantz, P*; Machin, G (2016) Response to Macnaughton's"Comment on `A low-uncertainty measurement of the Boltzmann constant'". Metrologia, 53 (1). pp. 116-122.

de Podesta, M; Inseok Yang*,, ; Mark, D F*; Underwood, R; Sutton, G; Machin, G (2015) Correction of NPL-2013 estimate of the Boltzmann constant for argon isotopic composition and thermal conductivity. Metrologia, 52 (5). S353-S363

de Podesta, M; Mark, D F; Dymock, R C; Underwood, R; Bacquart, T; Sutton, G; Davidson, S; Machin, G (2017) Re-estimation of argon isotopes ratios leading to a revised estimate of the Boltzmann constant. Metrologia, 54 (5). pp. 683-692.

de Podesta, M; Sutton, G; Edwards, G J; Stanger, L; Preece, H (2015) Practical acoustic thermometry with twin-tube and single-tube sensors. In: 4th International Conference on Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 20-24 April 2015, Lisbon, Portugal.

de Podesta, M; Sutton, G; Underwood, R; Bell, S A; Stevens, M; Byrne, T; Josephs-Franks, P W (2011) Outgassing of water vapour, and its significance in experiments to determine the Boltzmann constant. Metrologia, 48 (1). L1-L6.

de Podesta, M; Sutton, G; Underwood, R; Perkin, M; Davidson, S; Morantz, P* (2011) Assessment of uncertainty in the determination of the Boltzmann constant by an acoustic technique. Int. J. Thermophysics, 32 (1-2). pp. 413-426.

de Podesta, M; Sutton, G; Underwood, R J; Legg, S*; Steinitz, A* (2010) Practical acoustic thermometry with acoustic waveguides. Int. J. Thermophysics, 31 (8-9). pp. 1554-1566.

de Podesta, M; Underwood, R; Bevilacqua, L; Bell, S (2018) Air temperature measurement challenges in precision metrology. Journal of Physics: Conference Series, 1065. 122027 ISSN 1742-6588

de Podesta, M; Underwood, R; Sutton, G; Morantz, P*; Harris, P M (2013) Internal consistency in the determination of the Boltzmann constant using a quasispherical resonator. AIP Conf. Proc., 1552. pp. 17-22.

de Podesta, M; Underwood, R; Sutton, G; Morantz, P*; Harris, P M; Mark, D F*; Stuart, F M*; Vargha, G*; Machin, G (2013) A low-uncertainty measurement of the Boltzmann constant. Metrologia, 50 (4). pp. 354-376.

del CAmpo, D*; Machin, G (2013) A European project on high temperature metrology for industrials applications. Boletin de la Sociedad Espanola de ceramica y vidrio, 52 (4). V-VIII

del Campo, D*; Bojkovski, J*; Dobre, M*; Filipe, E*; Kalemci, M*; Merlone, A*; Pearce, J; Peruzzi, A*; Sparasci, F*; Strnad, R*; Taubert, D*; Turzo-Andras, E* (2014) Novel and improved techniques for traceable temperature dissemination. High Temp.-High Press., 43 (1). pp. 1-11.

E

Edler, F*; Morice, R*; Ogura, H*; Pearce, J (2010) Investigation of Co-C cells for improved thermocouple calibration. Metrologia, 47 (1). pp. 90-95.

Edler, F*; Morice, R*; Pearce, J (2008) Construction and investigation of PT/PD thermocouples in the frame of the EUROMET project 857. Int. J. Thermophysics, 29 (1). pp. 199-209.

Edwards, C S; Barwood, G P; Gill, P; Bell, S A; Stevens, M; Schirmer, B*; Melling, A*; Venzke, H*; Weber, H*; Benyon, R*; Mackrodt, P*; Nielsen, J*; de Groot, M J*; Pusterla, L* (2001) Development and evaluation of a tunable diode laser absorption spectrometer for trace humidity measurements. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Edwards, C S; Barwood, G P; Gill, P; Stevens, M; Schirmer, B*; Benyon, R*; Mackrodt, P* (2000) An IR tunable diode laser absorption spectrometer for trace humidity measurements at atmospheric pressure. IEEE Lasers and Electro-Optics Society Newsletter, 14 (5). pp. 13-14.

Edwards, G J; Levick, A P; Xie, Z (1996) Laser emissivity free thermometry (left). In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Elliott, C; Greenen, A; Tucker, D; Ford, T; Pearce, J V (2017) A slim-line integrated self-validating thermocouple - initial results. Int. J. Thermophysics, 38 (9). 141

Elliott, C; Pearce, J V; Failleau, G*; Deuze, T*; Briaudean, S*; Sadli, M*; Machin, G (2012) Fe-C eutectic fixed-point cells for contact thermometry: an investigation and comparison. Metrologia, 49 (1). pp. 88-94.

Elliott, C J; Failleau, G*; Deuze, T*; Sadli, M*; Pearce, J V; Machin, G (2014) Long-term monitoring of thermocouple stability with miniature fixed-point cells. Int. J. Thermophysics, 35 (3). pp. 560-573.

Elliott, C J; Ford, T; Ongrai, O; Pearce, J V (2017) Reliability of high-temperature fixed-point installations over 8 years. International Journal of Thermophysics, 38 (12). 177

Elliott, C J; Greenen, A; Lowe, D; Pearce, J V; Machin, G (2015) High temperature exposure of in-situ thermocouple fixed-point cells: stability with up to three months continuous use. Metrologia, 52 (2). pp. 267-271.

Elliott, C J; Large, M J*; Pearce, J V; Machin, G (2014) Compatability of Materials for use at high temperatures with W-Re thermocouples. Int. J. Thermophysics, 35 (6-7). pp. 1202-1214.

Elliott, C J; Pearce, J; Machin, G (2012) High temperature sensors with self-calibrating capabilities: abstract and summary. NPL Report. ENG 37

Elliott, C J; Pearce, J; Machin, G (2012) User's manual for NPL designed and supplied self-validating thermocouples, and the associated breadboard. NPL Report. ENG 38

Elliott, C J; Pearce, J V; Machin, G; Ford, T*; Hicks, K* (2013) Pt/Pd thermocouple resilience over 327 operating hours in an industrial calibration laboratory. AIP Conf. Proc., 1552. pp. 549-553.

F

Failleau, G*; Deuze, T*; Elliott, C J; Pearce, J V; Machin, G; Briaudeau, S*; Sadli, M* (2011) Development of an Fe-C eutectic fixed-point for the calibration and in-situ monitoring of thermocouples. In: 2nd IMEKO TC11 International Symposium Metrological Infrastructure, 15-17 June 2011, Cavtat, Dubrovnik Riviera, Croatia.

Failleau, G*; Elliott, C J; Deuze, T*; Pearce, J V; Machin, G; Sadli, M* (2014) Miniature fixed-point cell approaches for in-situ monitoring of thermocouple stability. Int. J. Thermophysics, 35 (6-7). pp. 1223-1238.

Feistel, R*; Wielgosz, R*; Bell, S A; Camoes, M F*; Cooper, J R*; Dexter, P*; Dickson, A G*; Fisicaro, P*; Harvey, A H*; Heinonen, M*; Hellmuth, O*; Kretzschmar, H J*; Lovell-Smith, J W*; McDougall, T J*; Pawlowicz, R*; Ridout, P*; Seitz, S*; Spitzer, P*; Stoica, D*; Wolf, H* (2016) Metrological challenges for measurements of key climatological observables: oceanic salinity and pH, and atmospheric humidity. Part 1: overview. Metrologia, 53 (1). R1-R11

Fellmuth, B*; Fischer, J*; Machin, G; Picard, S*; Steur, P P M*; Tamura, O*; White, D R*; Yoon, H* (2016) The kelvin redefinition and its mise en pratique. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150037

Fellmuth, B*; Head, D I; Pavese, F*; Szmyrka-Grazebyk, A*; Tew, W* (2001) Special problems when realising the triple point of hydrogen as a defining fixed point of the ITS-90. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Fellmuth, B*; Wolber, L*; Hermier, Y*; Pavese, F*; Steur, P P M*; Peroni, I*; Szmyrka-Grzebyk, A*; Lipinski, L*; Tew, W L*; Nakano, T*; Sakurai, H*; Tamura, O*; Head, D I; Hill, K D*; Steele, A G* (2005) Isotopic and other influences on the realization of the triple point of hydrogen. Metrologia, 42. pp. 171-193.

Fischer, J; Fellmuth, B; Gaiser, C; Zandt, T; Pitre, L; Sparasci, F; Plimmer, M D; de Podesta, M; Underwood, R; Sutton, G; Machin, G; Gavioso, R M; Madonna Ripa, D; Steur, P P M; Qu, J; Feng, X J; Zhang, J; Moldover, M R; Benz, S P; White, D R; Gianfrani, L; Castrillo, A; Moretti, L; Darquié, B; Moufarej, E; Daussy, C; Briaudeau, S; Kozlova, O; Risegari, L; Segovia, J J; Martín, M C; del Campo, D (2018) The Boltzmann project. Metrologia, 55 (2). R1-R20. ISSN 0026-1394

Fischer, J*; Fellmuth, B*; Gaiser, C*; Zandt, T*; Pitre, L*; Briaudeau, S*; Sparasci, F*; Truong, D*; Hermier, Y*; Gavioso, R M*; Guianvarc'h, C*; Albo, P A G*; Merlone, A*; Moro, F*; de Podesta, M; Sutton, G; Underwood, R; Machin, G; del Campo, D*; Segovia Puras, J*; Vega-Meza, D*; Petersen, J*; Hald, J*; Nielsen, L*; Valkiers, S*; Darquie, B*; Borde, C*; Chardonnet, C*; Daussy, C*; Gianfrani, L*; Castrillo, A*; Laporta, P*; Galzerano, G* (2013) The IMERAPlus joint research project for determinations of the Boltzmann constant. AIP Conf. Proc., 1552. pp. 1-10.

Fischer, J*; Gerasimov, S*; Hill, K D*; Machin, G; Moldover, M R*; Pitre, L*; Steur, P*; Stock, M*; Tamura, O*; Ugur, H*; White, D R*; Yang, I*; Zhang, J* (2008) Preparative Steps towards the new definition of the kelvin in terms of the Boltzmann constant. Int. J. Thermophysics, 28 (6). pp. 1753-1765.

Fischer, J*; de Podesta, M; Hill, K; Moldover, M*; Pitre, L*; Rusby, R; Steur, P*; Tamura, O*; White, R*; Wolber, L* (2011) Present estimates of the differences between thermodynamic temperatures and the ITS-90. Int. J. Thermophysics, 32 (1-2). pp. 12-25.

G

Gaiser, C; Fellmuth, B; Steur, P; Szmyrka-Grzebyk, A; Manuszkiewicz, H; Lipinski, L; Peruzzi, A; Rusby, R; Head, D (2017) EURAMET key comparison no. EURAMET.T-K1: realisations of the ITS-90 from 2.6 K to 24.5561 K, using rhodium-iron resistance thermometers. Metrologia, 54 (1A). 03002 ISSN 0026-1394

Gallegos, J G*; Benyon, R*; Avila, S*; Benito, A*; Gavioso, R M*; Mitter, H*; Bell, S A; Stevens, M; Bose, N*; Ebert, V*; Heinonen, M*; Sairanen, M*; Peruzzi, A*; Bosma, R*; Val'kova, R* (2015) An investigation of the comparative performance of diverse humidity sensing techniques in natural gas. J. Natural Gas Sci. Eng., 23. pp. 407-416.

Gallop, J C (1997) Microwave applications of high temperature superconductors. Supercond. Sci. Technol., 10. A120-A141

Gavioso, R M*; Ripa, D M*; Steur, P P M*; Gaiser, C*; Zandt, T*; Fellmuth, B*; de Podesta, M; Underwood, R; Sutton, G; Pitre, L*; Sparasci, F*; Risegari, L*; Gianfrani, L*; Castrillo, A*; Machin, G (2016) Progress towards the determination of the thermodynamic temperature with ultra-low uncertainty. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150046

Gee, R M*; Farley, R S*; Sax, P*; Benyon, R*; Stevens, M; Bose, N* (2008) An interlaboratory comparison of relative humidity and temperature probes using diverse generation techniques. Int. J. Thermophysics, 29 (5). pp. 1696-1708.

Ghassemi, P; Pfefer, T J; Casamento, J P; Simpson, R; Wang, Q Z (2018) Best practices for standardized performance testing of infrared thermographs intended for fever screening. PLOS ONE, 13 (9). e0203302. e0203302 ISSN 1932-6203

Greenen, A; Webster, E S (2017) Thermal recovery from cold-working in type K bare-wire thermocouples. International Journal of Thermophysics, 38 (12). 179

H

Hao, L*; Klein, N*; Radcliffe, W J; Gallop, J C; Ghosh, I S* (1998) Temperature compensated cryogenic whispering gallery mode resonator for microwave frequency standard applications. In: CPEM '98 Conference on Precision Electromagnetic Measurements Conference Digest, 6-10 July 1998, Washington DC, USA.

Hao, X P*; McEvoy, H C; Machin, G; Yuan, Z D*; Wang, T J* (2013) A comparison of the In, Sn, Zn and Al fixed points by radiation thermometry between NIM and NPL and verification of the NPL blackbody reference sources from 156 °C to1000 °C. Meas. Sci. Technol., 24 (7). 075004

Hastings, M W*; Pearce, J V; Machin, G (2012) Electrical resistance breakdown of Type N mineral-insulated metal-sheathed thermocouples above 800 °C. Meas. Tech., 55 (8). pp. 941-948.

Head, D I (1994) EUROMET intercomparison of mercury triple point cells at NPL. NPL Report. QU 99

Head, D I (2001) Recent measurements of european deuterium cells at NPL. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Head, D I (1996) Recent measurements of the Deuterium triple point at NPL. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Head, D I; Davies, H; Gray, J; Quested, P N (2008) The comparison of MTDATA with the melting/freezing point curves of ITS-90 metal fixed points. Int. J. Thermophysics, 29 (5). pp. 1796-1807.

Head, D I; Gray, J; de Podesta, M (2009) Current work on furnaces and data analysis to improve the uniformity and noise levels for metal fixed points. Int. J. Thermophysics, 30 (1). pp. 296-305.

Head, D I; Rusby, R L; Martin, J E (1995) Cryogenic triple point cells at NPL. NPL Report. QM 116

Heinonen, M*; Anagnostou, M*; Bartolo, J*; Bell, S A; Benyon, R*; Bergerud, R A*; Bojkovski, J*; Bose, N*; Dinu, C*; Smorgon, D*; Flakiewicz, K*; Martin, M J*; Nedialkov, S*; Nielsen, M B*; Aytekin, S O*; Otych, J*; Pedersen, M*; Rujan, M*; Testa, N*; Turzo-Andras, E*; Vilbaste, M*; White, M* (2014) Comparison of air temperature calibrations. Int. J. Thermophysics, 35 (6-7). pp. 1251-1272.

Heinonen, M*; Anagnostou, M*; Bell, S A; Stevens, M; Benyon, R*; Bergerud, R A*; Bojkovski, J*; Bosma, R*; Nielsen, J*; Bose, N*; Cromwell, P*; Dogan, A K*; Aytekin, S*; Uytun, A*; Fernicola, V*; Flakiewicz, K*; Blanquart, B*; Hudokin, D*; Jacobson, P*; Kentved, A*; Loio, I*; Mamontov, G*; Masarykova, A*; Mitter, H*; Mnguni, R*; Otych, J*; Steiner, A*; Zsofia, N S*; Zvizdic, D* (2012) Investigation of the equivalence of national dew-point temperature realizations in the range -50 °C to +20 °C. Int. J. Thermophysics, 33 (8-9). pp. 1422-1437.

Heinonen, M.; Bell, S.; Choi, B. Il; Cortellessa, G.; Fernicola, V.; Georgin, E.; Hudoklin, D.; Ionescu, G. V.; Ismail, N.; Keawprasert, T.; Krasheninina, M.; Aro, R.; Nielsen, J.; Oğuz Aytekin, S.; Österberg, P.; Skabar, J.; Strnad, R. (2018) New primary standards for establishing SI traceability for moisture measurements in solid materials. International Journal of Thermophysics, 39 (1). 20 ISSN 0195-928X

Hermier, Y*; Head, D I; Pitre, L*; Vergé, A*; Géneville, C*; Bonnier, G* (2001) A new generation of BNM INM MULTICOMPARMENT sealed cells for low temperature fixed points. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Heyer, D*; Noatsch, U*; Tegeler, E*; Anagnostou, M*; Turzo-Andres, E*; Antonsen, I*; Augevicius, V*; Bojkovski, J*; Bronnum, A*; Chimenti, V*; Duris, S*; Filipe, E*; Gaita,S*,, ; Gray, J; Head, D I; Grudniewicz, E*; Ivarsson, J*; Kalemci, M*; Kerkhof, O*; Lobo, I*; Nemeth, S*; Pokhodun, A*; Ranostaj, J*; Renaot, E*; Rosenkranz, P*; Smid, M*; Steur, P*; Steiner, A*; Valin, M*; Veliki, T*; Weckström, T* (2007) Intercomparison of the realization of the ITS-90 at the freezing points of Al and Ag between European NMIs. Int. J. Thermophysics, 28 (6). pp. 1964-1975.

J

Joung, W; Pearce, J; Park, J (2018) Carbothermal reduction of oxidized tin and recovery of deep supercool. Metrologia, 55 (6). pp. 819-827. ISSN 0026-1394 (In Press)

Joung, W; Pearce, J V; Park, J (2018) Comparison between the liquidus temperature and triple-point temperature of tin realized by heat pulse-based melting. Metrologia, 55 (3). L17-L24. ISSN 0026-1394

K

Knazovicka, L*; Lowe, D; Machin, G; Davies, H; Rani, A* (2015) Stability of cobalt-carbon high temperature fixed points doped with iron and platinum. Metrologia, 52 (2). pp. 353-359.

L

Langham, C D; Gallop, J C (1997) Cryogenic dielectric resonators: performance and potential. IEEE Trans. Instrum. Meas., 46 (2). pp. 130-132.

Large, M J*; Pearce, J V (2014) A phase-field solidification model of almost pure ITS-90 fixed points. Int. J. Thermophysics, 35 (6-7). pp. 1109-1126.

Levick, A P; Land, D*; Hand, J* (2011) Validation of microwave radiometry for measuring the internal temperature of human tissue. Meas. Sci. Technol., 22 (6). 065801

Levick, A P; Piachaud, T*; de Podesta, M (2011) Radiation thermometry based on photonic crystal fibre. Int. J. Thermophysics, 32 (1-2). pp. 372-382.

Liew, H; Tang, W; Plassmann, P; Ring, F; Whittam, A; Rogers, L; Simpson, R; Machin, G; Edmonds, M E; Petrova, N L (2019) A temperature rise in the diabetic foot is not always associated with ulceration. Diabetic Medicine, 36 (S1). p. 56.

Lockmuller, N; Redgrove, J; Kubicar, L* (2003) Measurement of thermal conductivity with the needle probe. High Temp.-High Press., 35-36 (2). pp. 127-138.

Lovell-Smith, J W*; Feistel, R*; Harvey, A H*; Hellmuth, O*; Bell, S A; Heinonen, M*; Cooper, J R* (2016) Metrological challenges for measurements of key climatological observables. Part 4: atmospheric relative humidity. Metrologia, 53 (1). R40-R59

Lowe, D; Battuello, M*; Machin, G; Girard, F* (2003) A comparison of size of source effect measurements of radiation thermometers between IMGC and NPL. AIP Conf. Proc., 684 (2). pp. 625-630.

Lowe, D; Machin, G (2001) Development of metal carbon eutectic blackbody cavities to 2500 ºC at NPL. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Lowe, D; Machin, G (2004) High-temperature fixed-points at the National Physical Laboratory. In: SICE 2004 Annual Conference, 4-6 August 2004, Sapporo, Japan.

Lowe, D; McEvoy, H C; Machin, G (2003) Design and construction of a new primary standard pyrometer at NPL. AIP Conf. Proc., 684 (2). pp. 553-558.

Lowe, D; Morris-Crowthers, C P (2018) Validating the impurity component of high-temperature fixed-point uncertainty budgets with the Scheil solidification model. Journal of Physics: Conference Series, 1065. 122010 ISSN 1742-6588

Lowe, D; Yamada, Y* (2006) Reproducible metal-carbon eutectic fixed-points. Metrologia, 43 (2). S135-139

Lowe, D H (2016) Use of a phenomenological chemical scale for the identification of high distribution coefficient impurities within the ITS-90. IOP Conf. Ser.: Mater. Sci. Eng., 117. 012026

Lowe, D H; Todd, A D W*; Van den Bossche, R*; Bloembergen, P*; Anhalt, K*; Ballico, M*; Bourson, F*; Briaudeau, S*; Campos, J*; Cox, M G; del Campo, D*; Dury, M R; Gavrilov, V*; Grigoryeva, I*; Hernanz, M L*; Jahan, F*; Khlevnoy, B*; Khromchenko, V*; Lu, X*; Machin, G; Mantilla, J M*; Martin, M J*; McEvoy, H C; Rougie, B*; Sadli, M*; Salim, S G R*; Sasajima, N*; Taubert, D R*; van der Ham, E*; Wang, T*; Wei, D*; Whittam, A; Wilthan, B*; Woods, D J*; Woodward, J T*; Woolliams, E R; Yamada, Y*; Yamaguchi, Y*; Yoon, H W*; Yuan, Z* (2017) The equilibrium liquidus temperatures of rhenium-carbon, platinum-carbon and cobalt-carbon eutectic alloys. Metrologia, 54 (3). pp. 390-398.

Lowe, D H B (2013) A pyrometer for calibration traceable to a future thermodynamic temperature scale. Meas. Sci. Technol., 24 (1). 015901

Lowe, D H B; Broughton, M*; Machin, G; Willmott, J R* (2015) Comparison of extrapolated and interpolated temperature scales from 1000 °C to 2500 °C between a national measurement institute and an ISO17025 accredited calibration laboratory. Measurement, 76. pp. 129-135.

Lowe, D H B; Heufelder, S* (2013) Effect of solid-liquid interface velocity on the measured upper and lower limits of the liquidus temperature of cobalt-carbon eutectic fixed points. Metrologia, 50 (3). pp. 227-234.

Lowe, D H B; Kodwani, D* (2015) Zinc-bismuth and aluminium-indium monotectic alloy-based fixed-point cells with double phase transition for in-situ calibration of thermocouples. Int. J. Thermophysics, 36 (10-11). pp. 2654-2665.

Lowe, D H B; Machin, G (2012) Evaluation of methods for characterizing the melting curves of a high temperature cobalt-carbon fixed-point to define and determine its melting temperature. Metrologia, 49. pp. 189-199.

Lowe, D H B; Machin, G; Sadli, M* (2015) Correction of temperature errors due to the unknown effect of window transmission on ratio pyrometers using an in-situ calibration standard. Measurement, 68. pp. 16-21.

M

Macdonald, A*; Petrova, N*; Ainarkar, S*; Allen, J*; Plassmann, P*; Whittam, A; Bevans, J*; Ring, F*; Kluwe, B*; Simpson, R (2017) Thermal symmetry of healthy feet: a precursor to a thermal study of diabetic feet prior to skin breakdown. Physiol. Meas., 38 (1). pp. 33-44.

Macfarlane, J*; Peden, D*; Hao, L*; Gallop, J C; Romans, E* (1997) Effect of junction noise in a resistive high Tc SQUID noise thermometer. Appl. Supercond.. pp. 723-726.

Machin, G (2013) Essential measurement. Meas. Control, 46 (3). pp. 90-96.

Machin, G (2012) HiTeMS: A pan-European project to solve high temperature measurement problems in industry. Meas. Control, 45 (10). pp. 315-318.

Machin, G (2012) Innovations in high temperature measurement. Meas. Control, 45 (5). pp. 141-144.

Machin, G (2012) Measuring the temperature of industrial success. AWE Int., 30 (June). pp. 59-63.

Machin, G (1997) The NPL high temperature radiation thermometry calibration facility. NPL Report. CBTM 3

Machin, G (2009) Progress in high temperature measurement standards at NPL. In: Metrologia 09 - International Congress of Metrologia 2009, 10 March 2009, Lisbon, Portugal.

Machin, G (2008) Realising the benefits of improvements in high temperature metrology. Acta Metrologica Sinica, 29 (4A). pp. 10-17.

Machin, G (1998) Report on NIST/NRLM infrared thermometer intercomparison to 3000 C: report to fulfil NMS milestone Q311d8. NPL Report. CBTM 4

Machin, G (2016) Towards implementing the new kelvin. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150053

Machin, G (2013) Twelve years of high temperature fixed point research: a review. AIP Conf. Proc., 1552. pp. 305-316.

Machin, G (2018) The kelvin redefined. Measurement Science and Technology, 29 (2). 022001

Machin, G (2006) A paradigm change in high temperature metrology. In: XVIII IMEKO World Congress - Metrology for a Sustainable Development, 17-22 September 2006, Rio de Janeiro, Brazil.

Machin, G; Anhalt, K*; Battuello, M*; Bourson, F*; Dekker, P*; Diril, A*; Edler, F*; Elliott, C J; Girard, F*; Greenen, A; Knazovicka, L*; Lowe, D; Pavlasek, P*; Pearce, J V; Sadli, M*; Strnad, R*; Seifert, M*; Vuelban, E M* (2016) The European project high temperature measurement solutions in industry (HiTeMS) - a summary of achievements. Measurement, 78. pp. 168-179.

Machin, G; Anhalt, K*; Bloembergen, P*; Sadli, M*; Yamada, Y*; Meyer, C W* (2013) Progress report for the CCT-WG5 high temperature fixed point research plan. AIP Conf. Proc., 1552. pp. 317-322.

Machin, G; Anhalt, K*; Edler, F*; Pearce, J V; Sadli, M*; Strnad, R*; Vuelban, E M* (2013) HiTeMs: a project to solve high temperature measurement problems in industry. AIP Conf. Proc., 1552. pp. 958-963.

Machin, G; Beynon, G*; Edler, F*; Fourrez, S*; Hartmann, J*; Lowe, D; Morice, R*; Sadli, M*; Villamanan, M (2003) HIMERT: a pan-european project for the development of metal-carbon eutectics as temperature standards. AIP Conf. Proc., 684 (1). pp. 285-290.

Machin, G; Bloembergen, P*; Anhalt, K*; Hartmann, J*; Sadli, M*; Saunders, P*; Woolliams, E R; Yamada, Y*; Yoon, H* (2010) Practical implementation of the mise-en-pratique for the definition of the kelvin above the silver point. Int. J. Thermophysics, 31 (8-9). pp. 1779-1788.

Machin, G; Bojkovski, J*; del Campo, D*; Dogan, A K*; Fischer, J*; Hermier, Y*; Merlone, A*; Nielsen, J*; Peruzzi, A*; Ranostaj, J*; Strnad, R* (2014) A European roadmap for thermometry. Int. J. Thermophysics, 35 (3). pp. 385-394.

Machin, G; Castro, P*; Levick, A P; Villamanan, M A* (2011) Temperature effects of imperfectly formed metal-ingots in high temperature fixed point crucibles. Measurement, 44 (4). pp. 738-742.

Machin, G; Childs, C* (2010) A systematic performance evaluation of brain and body temperature sensors using ultra-stable temperature references. J. Med. Eng. Technol., 34 (3). pp. 192-199.

Machin, G; Chu, B (1998) A transportable gallium melting point blackbody for radiation thermometry calibration. Meas. Sci. Technol., 9 (10). pp. 1653-1656.

Machin, G; Dong, W*; Martin, M J*; Lowe, D; Yuan, Z*; Wang, T*; Lu, X* (2011) Estimation of the degree of equivalence of the ITS-90 above the silver point between NPL, NIM and CEM using high temperature fixed points. Metrologia, 48 (3). pp. 196-200.

Machin, G; Dong, W*; Martin, M J*; Lowe, D; Yuan, Z*; Wang, T*; Lu, X* (2010) A comparison of the ITS-90 among NPL, NIM and CEM above the silver point using high temperature fixed points. Int. J. Thermophysics, 31 (8-9). pp. 1466-1476.

Machin, G; Engert, J; Gianfrani, L; McEvoy, H; Sparasci, F (2018) The European Metrology Programme for Innovation and Research project: Implementing the new kelvin 2 (InK2). Journal of Physics: Conference Series, 1065. 122002 ISSN 1742-6588

Machin, G; Engert, J*; Gavioso, R M*; Sadli, M*; Woolliams, E (2016) Summary of achievements of the European Metrology Research Programme Project 'Implementing the new Kelvin' (InK 1). Measurement, 94. pp. 149-156.

Machin, G; Engert, J*; Gavioso, R M*; Sadli, M*; Woolliams, E R (2014) The Euramet metrology research programme project implementing the new Kelvin (InK). Int. J. Thermophysics, 35 (3). pp. 405-416.

Machin, G; Fischer, J*; Moldover, M*; Saunders, J*; Trusler, M*; White, R* (2015) Towards implementing the new kelvin. Measurement, 74. pp. 113-115.

Machin, G; Johnson, B C*; Gibson, C*; Rusby, R L (1994) Intercomparison of the ITS-90 radiance temperature scales of the National Physical Laboratory (U.K.) and the National Institute of Standards and Technology. J. Res. Natl. Inst. Stand. Technol., 99 (6). 731 - 736

Machin, G; McEvoy, H C; Boyes, S J (1996) A realisation of the palladium point at the NPL. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

Machin, G; Pearce, J (2012) Step change improvements in high temperature thermocouple thermomery. In: 2012 UKACC International Conference on Control (CONTROL), 3-5 September 2012, Cardiff, UK.

Machin, G; Rocolfi, T*; Battuello, M*; Negro, G*; Jung, H-J*; Bloembergen, P*; Bosma, R*; Ivarsson, J*; Weckstrom, T* (1996) Comparison of the ITS-90 using a transfer standard infrared radiation thermometer between seven EU national measurement institutes. Metrologia, 33 (3). pp. 197-206.

Machin, G; Rusby, R L; McEvoy, H C; Simpson, R (2006) Traceability and calibration in temperature measurement: a clinical necessity. J. Med. Eng. Technol., 30 (4). pp. 212-217.

Machin, G; Sergienko, R* (2001) A comparative study of size of source effect (SSE) determination techniques. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Machin, G; Simpson, R (2003) Tympanic thermometer performance validation by use of a body temperature fixed point blackbody. Proc. SPIE - Int. Soc. Opt. Eng., 5073. pp. 51-7.

Machin, G; Simpson, R G; Broussely, M (2009) Calibration and validation of thermal imagers. Quantitative Infrared Thermography, 6 (2). pp. 133-147.

Machin, G; Simpson, R G; Broussely, M (2008) Calibration and validation of thermal imagers. In: 9th International Conference on Quantitative Infrared Thermography, 2-5 July 2008, Krakov, Poland.

Machin, G; Teixeira, R*; Lu, X*; Lowe, D (2015) Bilateral comparison between NPL and INMETRO using a high temperature fixed point of unknown temperature. Int. J. Thermophysics, 36 (2-3). pp. 327-335.

Machin, G; Tsai, B K* (2009) Temperature fundamentals. In: Experimental Methods in the Physical Sciences, Vol. 42 Radiometric temperature measurement. Elsevier, pp. 29-71. ISBN 9780123740212

Machin, G; Whittam, A; Ainarkar, S*; Allen, J*; Bevans, J*; Edmonds, M*; Kluwe, B*; Macdonald, A*; Petrova, N*; Plassmann, P*; Ring, F*; Rogers, L*; Simpson, R* (2017) A medical thermal imaging device for the prevention of diabetic foot ulceration. Physiol. Meas., 38 (3). pp. 420-430.

Machin, G; Wright, L; Lowe, D; Pearce, J (2008) Optimising the implementation of high temperature fixed-points through the use of thermal modelling. Int. J. Thermophysics, 29 (1). pp. 261-270.

Machin, G; Yamada, Y*; Lowe, D; Sasajima, N*; Sakuma, F*; Fan Kai*, (2001) A comparison of metal-carbon eutective blackbody cavities of rhenium, iridium, platinum and palladium between NPL and NMIJ. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Machin, G; del Campo, D*; Fellmuth, B*; Fischer, J*; Gavioso, R*; Lusher, C*; Merlone, A*; Mills, I*; Pitre, L*; de Podesta, M (2011) Meeting report: New kelvin dissemination workshop held at NPL on 27-28th Oct 2010. Metrologia, 48 (1). pp. 68-69.

Machin, J; Tucker, D; Pearce, J V (2018) A comprehensive survey of thermoelectric homogeneity of commonly used thermocouple types. Measurement Science and Technology, 29 (6). 067002

Mackechnie, C; Simpson, R (2006) Traceable calibration for blood pressure and temperature monitoring. Nursing Standard, 21 (11). pp. 42-47.

Malik, Z; Hunt, J D*; Davies, H; Lee, P D*; Lowe, D; Quested, P N (2011) A solidification approach to correcting for impurity uncertainties in fixed points. Int. J. Thermophysics, 32 (7-8). pp. 1589-1601.

Mark, D F*; Stuart, F M*; de Podesta, M (2011) New high-precision measurements of the isotopic composition of atmospheric argon,. Geochim. Cosmochim. Acta, 75 (23). pp. 7494-7501.

Martin, J E; Thwaite, C* (1996) Absolute radiometry in space using a cryogenic mechanical cooler. Proc. SPIE - Int. Soc. Opt. Eng., 2814. pp. 18-29.

Martins, L L*; Ribeiro, A S*; Sousa, J A E*; Forbes, A B (2012) Measurement uncertainty of dew-point temperature in a two-pressure humidity generator. Int. J. Thermophysics, 33 (8-9). pp. 1568-1582.

Martinsons, C D; Levick, A P; Edwards, G J (2003) Measurement of the thermal diffusivity of solids with an improved accuracy. Int. J. Thermophysics, 24 (4). pp. 1171-1183.

Martinsons, C D*; Levick, A P; Edwards, G J (2003) Measurement of the thermal diffusivity of solids with an improved accuracy. Int. J. Thermophysics, 24 (4). pp. 1171-1183.

Martinsons, C*; Levick, A P; Edwards, G J (2001) Precise measurements of thermal diffusivity by photothermal radiometry for semi-infinite targets using accurately determined boundary conditions. Anal. Sci., 17 (Specia). S114-S117

McEvoy, H; Martin, M J; Steiner, A; Schreiber, E; Girard, F; Battuello, M; Sadli, M; Ridoux, P; Gutschwager, B; Hollandt, J; Diril, A; Pehlivan, O (2018) EURAMET 658 Extension: project to examine underlying parameters in radiance temperature scale realisation from 156 ºC to 1000 ºC. Main comparison measurement report (CCT WG-KC version for publication on BIPM database). NPL Report. ENG 67

McEvoy, H C (2007) The examination of base parameters for ITS-90 scale realisation in radiation thermometry. EUROMET.T-S1 (EUROMET Project 658) Main measurement report (final version). NPL Report. ENG 2

McEvoy, H C; Chattle, M V; Butler, J (1996) Comparison of temperature scale maintained on platinum resistance thermometers with the NPL radiance temperature scale. Metrologia, 33. pp. 353-362.

McEvoy, H C; Machin, G; Fox, N P; Theocharous, E; Hassan, I S* (1996) An ingaas radiation thermometer for temperature scale realisation. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

McEvoy, H C; Machin, G; Friedrich, R*; Hartmann, J*; Hollandt, J* (2003) Comparison of the new NPL primary standard Ag fixed-point blackbody source with the primary standard fixed-point of PTB. AIP Conf. Proc., 684 (2). pp. 909-914.

McEvoy, H C; Martin, M J*; Steiner, A*; Schreiber, E*; Girard, F*; Battuello, M*; Sadli, M*; Ridoux, P*; Gutschwager, B*; Hollandt, J*; Diril, A*; Pehlivan, O* (2014) EURAMET project to examine underlying parameters in radiance temperature scale realisation, 156 °C to 1000 °C. Int. J. Thermophysics, 35 (3). pp. 446-466.

McEvoy, H C; Raven, K M; Pokhodoun, A I*; Matveyev, M S* (1995) Anglo-Russian agreement in metrology: Theme 26 the international temperature scale of 1990 above 962°C. NPL-VNIIM intercomparison of tungsten ribbon lamps. NPL Report. QU 107

McEvoy, H C; Raven, K M; Pokhodoun, A I*; Matveyev, M S* (1996) NPL - VNIIM intercomparison of tungsten ribbon lamps. In: TEMPMEKO 96, 6th International symposium on Temperature and Thermal Measurements in Industry and Science, 10 - 12 September 1996, Torino, Italy.

McEvoy, H C; Sadli, M*; Bourson, F*; Briaudeau, S*; Rougie, B* (2013) A comparison of the NPL and LNE-Cnam silver and copper fixed-point blackbody sources, and measurement of the silver/ copper temperature interval. Metrologia, 50 (6). pp. 559-571.

McEvoy, H C; Simpson, R; Machin, G (2004) New blackbody standard for the evaluation and calibration of tympanic ear thermometers at the NPL, UK. Proc. SPIE - Int. Soc. Opt. Eng., 5405 (1). pp. 54-60.

McMillan, J L; Whittam, A; Rokosz, M; Simpson, R C (2018) Towards quantitative small-scale thermal imaging. Measurement, 117. pp. 429-434.

McMillan, J. L.; Greenen, A.; Bond, W.; Hayes, M.; Simpson, R.; Sutton, G.; Machin, G.; Jowsey, J.; Adamska, A. (2019) Thermometry of intermediate level waste containers using phosphor thermometry and thermal imaging. Measurement, 132. pp. 207-212. ISSN 02632241

Melzack, N*; Jones, E*; Peters, D M*; Hurley, J G*; Watkins, R E J*; Fok, S*; Sawyer, C*; Marchetaux, G*; Acreman, A; Winkler, R; Lowe, D; Theocharous, T; Montag, V; Gibbs, D; Pearce, A B*; Bishop, G*; Newman, E*; Keen, S*; Stokes, J*; Pearce, A*; Stamper, R*; Cantell-Hynes, A* (2017) Variable temperature blackbodies via variable conductance: thermal design, modelling and testing. Int. J. Thermophysics, 38 (2). p. 30.

Merlone, A; Sanna, F; Beges, G; Bell, S; Beltramino, G; Bojkovski, J; Brunet, M; del Campo, D; Castrillo, A; Chiodo, N; Colli, M; Coppa, G; Cuccaro, R; Dobre, M; Drnovsek, J; Ebert, V; Fernicola, V; Garcia-Benadí, A; Garcia-Izquierdo, C; Gardiner, T; Georgin, E; Gonzalez, A; Groselj, D; Heinonen, M; Hernandez, S; Högström, R; Hudoklin, D; Kalemci, M; Kowal, A; Lanza, L; Miao, P; Musacchio, C; Nielsen, J; Nogueras-Cervera, M; Oguz Aytekin, S; Pavlasek, P; de Podesta, M; Rasmussen, M K; del-Río-Fernández, J; Rosso, L; Sairanen, H; Salminen, J; Sestan, D; Šindelářová, L; Smorgon, D; Sparasci, F; Strnad, R; Underwood, R; Uytun, A; Voldan, M (2018) The MeteoMet2 project—highlights and results. Measurement Science and Technology, 29 (2). 025802 ISSN 0957-0233

Merlone, A*; Lopardo, G*; Antonsen, I*; Bell, S A; Benyon, R*; Boese, N*; del Campo, D*; Dobre, M*; Drnovsek, J*; Elkatmis, A*; Georgin, E*; Grudniewicz, E*; Heinonen, M*; Holstein-Rathiou, C*; Johansson, J*; Klason, P*; Knorova, R*; Melvad, C*; Merrison, J*; Migala, K*; de Podesta, M; Saathoff, H*; Smorgon, D*; Sparasci, F*; Strnad, R*; Szmyrka-Grzebyk, A*; Vuillermoz, E* (2013) A new challenge for meteorological measurements: the "MeteoMet" project - metrology for meteorology. AIP Conf. Proc., 1552. pp. 1030-1035.

Merlone, A*; Lopardo, G*; Sanna, F*; Bell, S A; Benyon, R*; Bergerud, R A*; Bertiglia, F*; Bojkovski, J*; Bose, N*; Brunet, M*; Cappella, A*; Coppa, G*; del Campo, D*; Dobre, M*; Drnovsek, J*; Ebert, V*; Emardson, R*; Fernicola, V*; Flakiewicz, K*; Gardiner, T; Garcia-Izquierdo, C*; Georgin, E*; Gilabert, A*; Grykalowska, A*; Grudniewicz, E*; Heinonen, M*; Holmsten, M*; Hudoklin, D*; Johansson, J*; Kajastie, H*; Kaykisizli, H*; Klason, P*; Knazovicka, L*; Lakka, A*; Kowal, A*; Muller, H*; Musacchio, C*; Nwaboh, J*; Pavlasek, P*; Piccato, A*; Pitre, L*; de Podesta, M; Rasmussen, M K*; Sairanen, H*; Smorgon, D*; Sparasci, F*; Strnad, R*; Szmyrka-Grzebyk, A*; Underwood, R (2015) The MeteoMet project - metrology for meteorology: challenges and results. Meteorological Applications, 22. pp. 820-829.

Miao, P; Bell, S A; Rujan, M*; Mugurel, G*; McIlroy, C (2014) Report on literature review of recent development in loss on drying method for moisture determination. NPL Report. ENG 52

Mohandas, P*; Head, D I; Rusby, R L (1996) A powdered CMN thermometer for high accuracy measurements in the range 0.01 to 1K. Czech. J. Phys., LT21 Proc.,, 46 (Supple). pp. 2867-2868.

Moldover, M R*; Gavioso, R M*; Mehl, J B*; Pitre, L*; de Podesta, M; Zhang, J T* (2014) Acoustic gas thermometry. Metrologia, 51 (1). R1-R19

Morice, R*; Edler, F*; Pearce, J; Machin, G; Fischer, J*; Filtz, J R* (2008) High-temperature fixed points facilities for improved thermocouple calibrations - EUROMET project 857. Int. J. Thermophysics, 29 (1). pp. 231-240.

N

Nunn, J (2008) Thermographic evaluation of thermal barrier coatings on contoured substrates. NPL Report. MN 4

Nunn, J W; Banks, J P; Chunnilall, C J; Saunders, S R J (2004) Factors affecting fluorescence of thermally grown oxide in the presence of a thermal barrier coating. NPL Report. DEPC-MPE 006

O

Ongrai, O; Pearce, J V; Machin, G; Sweeney, S J (2011) A miniature high-temperature fixed point for self-validating type C thermocouples. Meas. Sci. Technol., 22 (10). 105103

Ongrai, O; Pearce, J V; Machin, G; Sweeney, S J* (2010) Comparative study of Pt/Pd and Pt-Rh/Pt thermocouples. Int. J. Thermophysics, 31 (8-9). pp. 1506-1516.

Ongrai, O; Pearce, J V; Machin, G; Sweeney, S J* (2011) Miniature Co-C eutectic fixed-point cells for self-validating thermocouples. Meas. Sci. Technol., 22 (1). 015104

Ongrai, O*; Elliott, C J (2017) Establishment of the Co-C eutectic fixed-point cell for thermocouple calibration at NIMT. Int. J. Thermophysics, 38 (8). p. 127.

Ongrai, O*; Pearce, J V; Machin, G; Norranim, U* (2015) Multi-mini-eutectic fixed-point cell for type C thermocouples self-calibration. Int. J. Thermophysics, 36 (2-3). pp. 423-432.

Ongrai, O*; Pearce, J V; Machin, G; Sweeney, S J* (2013) Self-calibration of a W/Re thermocouple using a miniature Ru-C (1954degC) eutectic cell. AIP Conf. Proc., 1552. pp. 504-509.

P

Pablo, C*; Bloembergen, P*; Yamada, Y*; Villamanan, M A*; Machin, G (2008) On the uncertainty in the temperature drop across the backwall of high temperature fixed points. Acta Metrologica Sinica, 29 (4A). pp. 253-260.

Pavese, F*; Fellmuth, B*; Hill, K D*; Head, D I; Hermier, Y*; Lipinski, L*; Nakano, T*; Peruzzi, A*; Sakurai, H*; Szmyrka-Grzebyk, A*; Steele, A G*; Steur, P P M*; Tamura, O*; Tew, W L*; Valkiers, S*; Wolber, L* (2008) Progress towards the determination of the relationship of triple-point temperature versus isotopic composition of neon. Int. J. Thermophysics, 29 (1). pp. 57-66.

Pavese, F*; Ferri, D*; Peroni, I*; Pugliese, A*; Steur, P P A*; Fellmuth, B*; Head, D I; Lipinski, L*; Peruzzi, A*; Grzebyk, A S*; Wolber, L* (2003) Cryogenic temperature sealed fixed points: a new-generation of nuclear cells at IMGC. AIP Conf. Proc., 684 (1). pp. 179-178.

Pavese, F*; de Groot, M*; Fellmuth, B*; Head, D I; Hermier, Y*; Szmyrka-Grazebyk, A*; Zanin, L* (2001) The project 'MULTICELLS' for the development of new temperature standards in the cryogenic range down to 2.18 K by means of sealed cells. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Pavese, F*; fellmuth, B*; Head, D I; Hermier, Y*; Peruzzi, A*; Grzebyk, A S*; Zanin, L* (2003) MULTICELLS: a European project on cryogenic temperature fixed points in sealed cells. AIP Conf. Proc., 684 (1). pp. 161-166.

Pavlasek, P*; Elliott, C J; Pearce, J V; Duris, S*; Palencar, R*; Koval, M*; Machin, G (2015) Hysteresis effects and strain-induced homogeneity effects in base metal thermocouples. Int. J. Thermophysics, 36 (2-3). pp. 467-481.

Pearce, J (2008) Automatic characterization of thermoelectric homogeneity. Acta Metrologica Sinica, 29 (5A). pp. 313-319.

Pearce, J (2016) EMPRESS: A pan-European project to enhance manufacturing process efficiency through improved temperature control. Meas. Control, 49 (8). pp. 252-255.

Pearce, J (2017) Extra points for thermometry. Nature Physics, 13 (1). p. 104.

Pearce, J (2007) Quantitative determination of the uncertainty arising from the inhomogeneity of thermocouples. Meas. Sci. Technol., 18 (11). pp. 3489-3495.

Pearce, J V (2014) Distribution coefficients of impurities in metals. Int. J. Thermophysics, 35 (3-4). pp. 628-635.

Pearce, J V (2016) Optimising platinum-rhodium thermocouple wire composition to minimise composition change due to evaporation of oxides determining the optical composition as a function of temperature. Johnson Matthey Technol. Rev., 60 (4). pp. 238-242.

Pearce, J V (2016) Survey of key parameters of impurities in aluminium: diffusion coefficients, solubility, and liquidus slopes. Int. J. Thermophysics, 37 (12). p. 123.

Pearce, J V (2013) A coupled heat and mass transfer model of pure metal freezing using comsol multiphysics. AIP Conf. Proc., 1552. pp. 289-294.

Pearce, J V (2007) A simple device for substantially improving metal-carbon eutectic fixed point performance by reducing temperature gradients. Metrologia, 44. L1-L3.

Pearce, J V; Crabb, J; Elliott, C J; Rusby, R L (2016) Analysis of SPRT calibration data obtained at NPL since the introduction of the ITS-90. Int. J. Thermophysics, 37 (12). p. 124.

Pearce, J V; Edler, F; Elliott, C J; Greenen, A; Harris, P M; Izquierdo, C G; Kim, Y-G; Martin, M J; Smith, I M; Tucker, D; Veltcheva, R I (2018) A systematic investigation of the thermoelectric stability of Pt–Rh thermocouples between 1300 °C and 1500 °C. Metrologia, 55 (4). pp. 558-567. ISSN 0026-1394

Pearce, J V; Edler, F; Elliott, C J; Rosso, L; Sutton, G; Andreu, A; Machin, G (2017) EMPRESS: a pan-European project to enhance process efficiency through improved temperature measurement. In: EVI-GTI Conference on Gas Turbine Instrumentation (GTI 2017), 28-30 November 2017, Amsterdam, Netherlands.

Pearce, J V; Edler, F*; Elliott, C J; Failleau, G*; Morice, R*; Ogura, H* (2011) Investigation of Pd-C cells to improve thermocouple calibration. Metrologia, 48 (5). pp. 375-381.

Pearce, J V; Edler, F*; Elliott, C J; Rosso, L*; Sutton, G; Andreu, A*; Machin, G (2017) EMPRESS: a European project to enhance process control through improved temperature measurement. Int. J. Thermophysics, 38 (8). p. 118.

Pearce, J V; Elliott, C J; Deeks, W*; Underwood, M* (2013) Thermal testing of undersea oil and gas pipeline insulation. AIP Conf. Proc., 1552. pp. 964-969.

Pearce, J V; Elliott, C J; Greenen, A; del Campo, D*; Martin, M J*; Garcia Izquierdo, C*; Pavlasek, P*; Nemecek, P*; Failleau, G*; Deuze, T*; Sadli, M*; Machin, G (2015) A pan-European investigation of the Pt-40%Rh/Pt-20%Rh (Land-Jewell) thermocouple reference function. Meas. Sci. Technol., 26 (1). 015101

Pearce, J V; Elliott, C J; Lowe, D H; Failleau, G*; Deuze, T*; Bourson, F*; Sadli, M*; Machin, G (2014) Performance of Pt-C, Cr7C3-Cr3C2, and Ru-C fixed points for thermocouple calibrations above 1600 °C. Int. J. Thermophysics, 35 (3). pp. 547-559.

Pearce, J V; Elliott, C J; Machin, G; Ongrai, O (2013) Self-validating type C thermocouples to 2300 °C using high temperature fixed points. AIP Conf. Proc., 1552. pp. 595-600.

Pearce, J V; Gisby, J A; Steur, P P M* (2016) Liquidus slopes of impurities in ITS-90 fixed points from the mercury point to the copper point in the low concentration limit. Metrologia, 53 (4). pp. 1101-1104.

Pearce, J V; Gray, J; Veltcheva, R I (2016) Characterisation of a selection of AC and DC resistance bridges for standard platinum resistance thermometry. Int. J. Thermophysics, 37 (11). p. 109.

Pearce, J V; Greenen, A; Bramley, P*; Cruickshank, D* (2015) Towards a practical Johnson noise thermometer for long-term measurements in harsh environments. In: 4th International Conference on Advancements in Nuclear Instrumentation Measurement Methods and their Applications (ANIMMA), 20-24 April 2015, Lisbon, Portugal.

Pearce, J V; Greenen, A D; Smith, A; Elliott, C J (2017) Relating composition and thermelectric stability of Pt-Rh alloy thermocouples. Int. J. Thermophysics, 38 (2). p. 26.

Pearce, J V; Harris, P M; Greenwood, J C (2010) Evaluating uncertainties in interpolations between calibration data for thermocouples. Int. J. Thermophysics, 31 (8-9). pp. 1517-1526.

Pearce, J V; Lowe, D H; Head, D I; Machin, G (2008) Optimising contact thermometry high temperature fixed point cells (>1100 ºC) using finite element analysis. Int. J. Thermophysics, 29 (1). pp. 250-260.

Pearce, J V; Machin, G (2008) A robust Pd-C fixed-point for calibration of thermocouples. Acta Metrologica Sinica, 29 (5A). pp. 224-228.

Pearce, J V; Machin, G; Ford, T*; Wardle, S* (2008) Long term drift characterisation of noble metal thermocouples using high temperature fixed points. Acta Metrologica Sinica, 29 (5A). pp. 86-89.

Pearce, J V; Machin, G; Ford, T*; Wardle, S* (2008) Optimising heat treatment of gas turbine blades with a Co-C fixed point for improved in-service thermocouples. Int. J. Thermophysics, 29 (1). pp. 222-230.

Pearce, J V; Montag, V; Lowe. D H,, ; Dong, W* (2011) Melting temperature of high temperature fixed points for thermocouple calibrations. Int. J. Thermophysics, 32 (1-2). pp. 463-470.

Pearce, J V; Ogura, H*; Izuchi, M*; Machin, G (2009) Evaluation of the Pd-C eutectic fixed point and the Pt/Pd thermocouple. Metrologia, 46 (5). pp. 473-479.

Pearce, J V; Ongrai, O; Machin, G; Sweeney, S J* (2010) Self-validating thermocouples based on high temperature fixed points. Metrologia, 47 (1). L1-L3.

Pearce, J V; Rusby, R L; Harris, P M; Wright, L (2013) The optimisation of self-heating corrections in resistance thermometry. Metrologia, 50 (4). pp. 345-353.

Pearce, J V; Sun, J P*; Zhang, J T*; Deng, X L* (2017) Impurity correction techniques applied to existing doping measurements of impurities in zinc. Int. J. Thermophysics, 38 (1). p. 4.

Pearce, J V; Veltcheva, R I; Large, M J (2013) Impurity and thermal modelling of SPRT fixed-points. AIP Conf. Proc., 1552. pp. 283-288.

Pearce, J V; Veltcheva, R I; Lowe, D H; Malik, Z; Hunt, J D* (2012) Optimisation of SPRT measurements of freezing in a zinc fixed point cell. Metrologia, 49 (3). pp. 359-367.

Pearce, J V; de Podesta, M; Elliott, C; Machin, G (2011) Improving temperature sensing in new reactors. Nucl. Eng. Int., 56 (688). pp. 18-20.

Pearce, J V; de Podesta, M; Elliott, C J; Machin, G (2012) Improving temperature sensing in nuclear environments. Meas. Control, 45 (2). pp. 60-62.

Peng, L*; Yuzhul, M*; Chaosheng, H*; Pavese, F*; Peroni, I*; Head, D I; Rusby, R L (2003) Realization of the lambda transition temperature of 4He using sealed cells. AIP Conf. Proc., 684 (1). pp. 191-195.

Petchpong, P*; Head, D I (2007) Argon pressure is maintained in an Aluminium thermometric fixed-point cell. Metrologia, 44 (6). L73-L75

Petchpong, P*; Head, D I; Au, J Y H* (2008) Influence of a trace impurity on tin fixed point plateaus. In: SICE 2008, 20-22 Aug 2008, Japan.

Petrova, N L; Donaldson, N K; Tang, W; MacDonald, A; Lomas, C; Ainarkar, S; Plassmann, P; Machin, G; Donaldson, A N A; Edmonds, M E (2019) Does infrared thermography in addition to standard care reduce ulcer recurrence: Data from a multicentre single-blind controlled clinical trial. Diabetic Medicine, 36 (S1). pp. 55-56.

Petrova, N L; Whittam, A; MacDonald, A; Ainarkar, S; Donaldson, A N; Bevans, J; Allen, J; Plassmann, P; Kluwe, B; Ring, F; Rogers, L; Simpson, R; Machin, G; Edmonds, M E (2018) Reliability of a novel thermal imaging system for temperature assessment of healthy feet. Journal of Foot and Ankle Research, 11 (1). 22 ISSN 1757-1146

Petrova, N L*; MacDonald, A*; Ainarkar, S*; Plassmann, P*; Ring, F*; Sinpson, R*; Bevans, J*; Allen, J*; Machin, G; Edmonds, M E* (2016) Infrared thermometry reveals no differences of the skin temperature at the plantar, dorsal, medial and lateral sites between the right foot and left foot in healthy volunteers. Diabetic Medicine, 33. p. 53.

Petrova, N L*; Tang, W*; MacDonald, A*; Lomas, C*; Ainarkar, S*; Bevans, J*; Allen, J*; Plassmann, P*; Machin, G; Edmonds, M E* (2017) The use of thermal imaging in the follow-up of healed diabetic foot ulcers. Diabetic Med., 34. p. 135.

Pusnik, I*; Clausen, S*; Favreau, J O*; Gutschwager, B*; Dogan, A K*; Diril, A*; Guven, O P*; McEvoy, H C; Hoem, S S*; Steiner, A*; van der Ham, E* (2011) Comparison of blackbodies for calibration of infrared ear thermometers. Int. J. Thermophysics, 32 (1-2). pp. 127-138.

Q

Quinn, T J*; Martin. J E, (1996) Total radiation measurements of thermodynamic temperature. Metrologia, 33. pp. 375-381.

R

Redgrove, J (1994) Improved method for measurement of spectral emittance to high temperatures. High Temp. Chem. Processes, 3. 187 - 193

Redgrove, J (1994) Spectral emittance measurements with the new NPL high temperature emissometer. In: Proc. 6th Int. Symp. on materials in a space environment, 19 - 23 September 1994, ESTE, Noordwijk, The Netherlands.

Redgrove, J; Battuello, M* (1995) An intercomparison of normal spectral emissivity measurements between NPL (UK), and IMGC (Italy). High Temp.-High Press., 27-8. pp. 135-146.

Redgrove, J; Warsop, G* (1995) Measurement of the spectral emittance of tantalum with the NPL high temperature emissometer. High Temp.-High Press., 27-8. pp. 245-251.

Renaot, E*; Hermier, Y*; Valin, M H*; Bonnier, G*; Adunka, F*; Van Der Linden, A*; Dobre, M*; Smid, M*; Bronnum, A*; Weckstrom, T*; Tegeler, E*; Noatsch, U*; Anagnostou, M*; Turzo-Andres, E*; Nemeth, S*; White, M*; Marcarino, P*; Steur, P*; Pauzha, A*; Augevicius, V*; de Groot, M*; Nielsen, J*; Helgesen, F*; Roszkowski, W*; Grundniewicz, E*; Kuna, R*; Filipe, E*; Lobo, I*; Gaita, S*; Chimenti, V*; Ivarsson, J*; Duris, S*; Ranostaj, J*; Bojkovski, J*; Steiner, A*; Ugur, S*; Gray, J; Bruce, S*; Rusby, R; Head, D I (2008) Intercomparison of the realizations of the ITS-90 from 83.8058 k to 692.677 k among European NMIs. Int. J. Thermophysics, 29 (3). pp. 991-1000.

Ricolfi, T*; Battuelle, M*; Girard, F*; Machin, G; McEvoy, H C; Ugur, S*; Diril, A* (2002) Radiation temperature scales between the indium and silver points realized at IMGC, NPL and UME using a fixed-point calibration technique. Meas. Sci. Technol., 13 (12). pp. 2090-3.

Ripple, D C*; Davis, R*; Fellmuth, B*; Fischer, J*; Machin, G; Quinn, T*; Steur, P*; Tamura, O*; White, D R* (2010) The roles of the mise en pratique for the definition of the kelvin. Int. J. Thermophysics, 31 (8-9). pp. 1795-1808.

Robinson, D W; Simpson, R; Parian, J A; Cozzani, A; Casarosa, G; Sablerollo, S; Ertel, H (2017) 3-D thermography for improving temperature measurements in thermal vacuum testing. CEAS Space Journal, 9 (3). pp. 333-350.

Rusby, R; De Podesta, M; Williams, J M (2005) Review of methods for a redetermination of the Boltzmann constant. NPL Report. DEPC-TH 006

Rusby, R L (2016) Introduction to temperature measurement. Measurement Good Practice Guide. 125

Rusby, R L (1994) Traceable temperatures, by J V Nicholas and D R White: book review. Meas. Control,, 27 (5). p. 167.

Rusby, R L (2010) The discontinuity in the first derivative of the ITS-90 at the triple point of water. Int. J. Thermophysics, 31 (8-9). pp. 1567-1572.

Rusby, R L; Cousins, D; Head, D I; Mohandas, P; Godfrin, H*; Bunkov, Y M*; Bäuerle, C*; Harakaly, R*; Collin, E*; Triqueneaux, S*; Lusher, C*; Li, J*; Saunders, J*; Cowen, B*; Nyéki, J*; Digby, M*; Pekola, J*; Gloos, K*; Hernandez, P*; de Groot, M*; Peruzzi, A*; Jochemsen, R*; Chinchure, A*; Bosch, W*; Mathu, F*; Flokstra, J*; Veldhuis, D*; Hermier, Y*; Pitre, L*; Vergé, A*; Benhalima, F*; Fellmuth, B*; Engert, J* (2001) Dissemination of the ultra-low temperature scale, PLTS-2000. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Rusby, R L; Fellmuth, B*; Engert, J*; Fogle, W E*; Adams, E D*; Pitre, L*; Durieux, M* (2007) Realization of the 3He melting-pressure scale, PLTS-2000. J. Low Temp. Phys., 149 (3-4). pp. 156-175.

Rusby, R L; Hudson, R P*; Durieux, M* (1994) Revised values for (t90 - t68) from 630ºC to 1064ºC. Metrologia, 31. 149 - 153

Rusby, R L; Hudson, R P*; Durieux, M*; Grohmann, K*; Jung, H-J*; Steur, P P M*; Nicholas, J V* (1996) Status of thermodynamic thermometry. Rev. Gen. Therm., 35. pp. 338-343.

Rusby, R L; Kempson, M* (1996) Cryogenic temperature measurement. Rev. Gen. Therm., 35. pp. 338-343.

Rusby, R L; Machin, D (2017) Hysteresis and instability in some IPRT sensors within temperature ranges between -196 °C and 150 °C. Int. J. Thermophysics, 38 (8). p. 117.

Rusby, R L; Pearce, J V; Elliott, C J (2017) Considerations relating to type 1 and type 3 non-uniqueness in SPRT interpolations of the ITS-90. International Journal of Thermophysics, 38 (12). 186

Rusby, R L; Sutton, G J M; Stanger, L R; Veltcheva, R I (2014) The method of instantaneous comparisons applied to the calibration of SPRTs in liquid nitrogen and liquid argon. Int. J. Thermophysics, 35 (3). pp. 657-667.

Rusby, R L; Tew, W L* (2013) Characteristics of rhodium-iron resistance thermometers and interpolation properties from 0.65 K to 24.5561 K. AIP Conf. Proc., 1552. pp. 409-413.

S

Sadli, M*; Bloembergen, P*; Khlevnoy, B*; Wang, T*; Yamada, Y*; Machin, G (2011) An international study of the long-term stability of metal-carbon eutectic cells. Int. J. Thermophysics, 32 (7-8). pp. 1786-1799.

Sadli, M*; Bourson, F*; Diril, A*; Journeau, C*; Lowe, D; Parga, C* (2014) Construction and in-situ characterisation of high-temperature fixed point cells devoted to industrial applications. EPJ Web of Conferences, 77. 00018.

Sadli, M*; Machin, G; Anhalt, K*; Bourson, F*; Briaudeau, S*; del Campo, D*; Diril, A*; Kozlova, O*; Lowe, D H; Amor, J M M*; Martin, M J*; McEvoy, H C; Ojanen-Saloranta, M*; Pehlivan, O*; Rougie, B*; Salim, S G R* (2016) Dissemination of thermodynamic temperature above the freezing point of silver. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150043

Sadli, M*; Machin, G; Lowe, D; Hartmann, J*; Morice, R* (2001) Realisation and comparison of metal-carbon eutectic points for radiation thermometry applications and W-Re thermocouple calibration. In: TEMPMEKO 01, June 2001, Berlin, Germany.

Sadli, M*; Yamada, Y*; Wang, T*; Yoon, H*; Bloembergen, P*; Machin, G (2008) Stability and robustness tests on Co-C, Pt-C and Re-C cells: the first results. Acta Metrologica Sinica, 29 (5A). pp. 59-64.

Sadli, M*; de Podesta, M; del Campo, D*; Deuze, T*; Edwards, G J; Elliott, C J; Failleau, G*; Fourrez, S*; Garcia Izquierdo, C*; Laurie, M*; Mokdad, S A*; Pearce, J V; Sutton, G J M (2013) New temperature references and sensors for the next generation of nuclear power plants. In: 3rd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications (ANIMMA)., 23-27 June 2013, Marseille, France..

Sadli, M*; delCampo, D*; de Podesta, M; Deuze, T*; Failleau, G*; Elliott, C J; Fourrez, S*; Garcia, C*; Pearce, J V (2013) MetroFission: new high-temperature references and sensors for the nuclear industry. AIP Conf. Proc., 1552. pp. 1003-1008.

Sakuma, F*; Sakate, H*; Carol Johnson, B*; Gibson, C*; Machin, G; Rocolfi, T*; Battuello, M*; Fischer, J*; Jung, H-J* (1996) International comparison of temperature scales among five metrological laboratories using a transfer standard radiation thermometer. Metrologia, 33. pp. 241-248.

Sakuma, F*; Sakate, H*; Johnson, B C*; Gibson, C*; Machin, G; Ricolfi, T*; Battuello, M*; Fischer, J* (1997) International intercomparisons using round-robin radiation thermometers organised bu NRIM in the last four years. In: Proc. 6th International Conference of Temperature and Thermal Measurements (TEMPBEIJING 97), 1997, Beijing, China.

Salmon, D R (1993) The NPL 610mm guarded hot-plate/heat flow meter standard apparatus for thick insulations. In: Thermal conductivity 22: proceedings of the 22nd international thermal conductivity conference, 7 - 10 November 1993, Tempe, Arizona, USA.

Salmon, D R (1995) The NPL high temperature guarded hot plate. In: Proc. 23rd International Thermal Conductivity Conference, 1995, Nashville, USA.

Salmon, D R (2001) Thermal conductivity of insulations using guarded hot plates, including recent developments and sources of reference materials. Meas. Sci. Technol., 12 (12). R89-R98

Salmon, D R; Tye, R* (2001) An inter-comparison of guarded hot plate and heat flow meter apparatus within the United Kingdom and Ireland. NPL Report. CBTLM 8

Salmon, D R; Tye, R* (2000) An intercomparison of heat flow meter apparatus within the United Kingdom and Eire. High Temp.-High Press., 32 (1). pp. 19-28.

Salmon, D R; Williams, R G; Tye, R P (2002) Thermal conductivity and moisture measurements on masonry materials. ASTM Spec. Tech. Publ., 1426. pp. 58-78.

Saunders, P*; Fischer, J*; Sadli, M*; Battuello, M*; Park, C W*; Zundong, Y*; Yoon, H*; Li, W*; van der Ham, E*; Sakuma, F*; Yamada, Y*; Ballico, M*; Machin, G; Fox, N P; Hollandt, J*; Matveyev, M*; Bloembergen, P*; Ugar, S* (2008) Uncertainty budgets for calibration of radiation thermometers below the silver point. Int. J. Thermophysics, 29 (3). pp. 1066-1083.

Saxholm, S; Högström, R; Sarraf, C; Sutton, G; Wynands, R; Arrhén, F; Jönsson, G; Durgut, Y; Peruzzi, A; Fateev, A; Liverts, M; Adolfse, C; Öster, A (2018) Development of measurement and calibration techniques for dynamic pressures and temperatures (DynPT): background and objectives of the 17IND07 DynPT project in the European Metrology Programme for Innovation and Research (EMPIR). Journal of Physics: Conference Series, 1065. 162015 ISSN 1742-6588

Schirmer, B*; Venzke, H*; Melling, A*; Edwards, C S; Barwood, G P; Gill, P; Stevens, M; Benyon, R*; Mackrodt, P* (2000) High precision trace humidity measurements with a fibre-coupled diode laser absorption spectrometer at atmospheric pressure. Meas. Sci. Technol., 11. pp. 382-391.

Schöttl, S; Brett, D J L* (2006) Applications of thermal imaging in solid oxide fuel cell research. NPL Report. DEPC-TH 007

Schöttl, S; Rusby, R L; Godfrin, H*; Meschke, M*; Goudon, V*; Triqueneaux, S*; Peruzzi, A*; de Groot, M J*; Jochemsen, R*; Bosch, W*; Hermier, Y*; Pitre, L*; Rives, C*; Fellmuth, B*; Engert, J* (2005) Evaluation of SRD1000 superconductive reference devices. J. Low Temp. Phys., 138 (3-4). pp. 941-946.

Seraffon, M; Simms, N J*; Nicholls, J R*; Sumner, J*; Nunn, J (2011) Performance of thermal barrier coatings in industrial gas turbine conditions. Mater. High Temp., 28 (4). pp. 309-314.

Simpson, R C; McEvoy, H C; Machin, G; Howell, K*; Naeem, M*; Plassman, P*; Ring, F*; Campbell, P*; Song, C*; Taverner, J*; Ridley, I* (2008) In field-of-view thermal image calibration system for medical thermography applications. In: UNSPECIFIED.

Smith, E*; Machin, G; Gray, J; Veltchera, R (2010) The use of thermowell bushes at the triple point of water for improving repeatability. Int. J. Thermophysics, 31 (8-9). pp. 1438-1443.

Stacey, C (2002) NPL vacuum guarded hot-plate for measuring thermal conductivity and total hemispherical emittance of insulation materials. ASTM Spec. Tech. Publ., 1426. pp. 130-146.

Stevens, M (1998) Improved flow rate monitoring of the NPL high dew-point generator. NPL Report. CMAM 13

Stevens, M (1998) Study of alternative fluids for use in the humidity generator at NPL. NPL Report. CMAM 14

Stevens, M (1998) Uncertainty evaluation of the relative humidity facility at NPL. NPL Report. CMAM 15

Stevens, M; Armitage, D (1996) Uncertainty evaluation of the NPL standard humidity generator. NPL Report. MOT 7

Stevens, M; Benyon, R*; Bell, S A; Vicente, T* (2008) A trial intercomparison of humidity generators at extremes of range using relative humidity transmitters. Int. J. Thermophysics, 29 (5). pp. 1685-1695.

Stevens, M; Collier, T; Harris, R* (2000) Comparison of instruments for measuring relative humidity. NPL Report. CBTLM 6

Sutton, G; Edwards, G J; Veltcheva, R I; de Podesta, M (2015) Twin-tube Practical acoustic thermometry: theory and measurements up to 1000 °C. Supercond. Sci. Technol., 28 (8). 085901

Sutton, G; Greenen, A; Roebuck, B; Machin, G (2019) Imaging phosphor thermometry from T = 20 °C to 450 °C using the time-domain intensity ratio technique. Measurement Science and Technology, 30 (4). 044002 ISSN 0957-0233

Sutton, G; Levick, A P; Edwards, G J; Greenhalgh, D* (2006) A combustion temperature and species standard for the calibration of laser diagnostic techniques. Combust. Flame, 147. pp. 39-48.

Sutton, G; Rusby, R L (1999) Intercomparison of the freezing point of Indium. Euromet Project No. 391 NPL measurements. NMSPU Project Reference 11B17. NPL Report. CBTM 6

Sutton, G; de Podesta, M; Veltcheva, R I; Gélat, P N; Minh, H D; Edwards, G (2013) Practical acoustic thermometry with acoustic waveguides. AIP Conf. Proc., 1552. pp. 943-948.

Sutton, G J M (2014) Acoustic gas thermometry: models and corrections for argon from 90 K to 1500 K. NPL Report. ENG 49

Sutton, G J M (2009) Determination of the boltzmann constant: acoustic models and corrections for argon and helium. NPL Report. ENG 19

Sutton, G J M (2016) The NPL standard flame: operating instructions. NPL Report. ENG 65

Sutton, G J M (2009) Uncertainty in the TBLC and bulk dissipation corrections for TCU1 / argon. NPL Report. ENG 20

Sutton, G J M (2010) Uncertainty in the TBLC and bulk dissipation corrections for the one litre spheres NPL1 and NPL2, filled with argon at T=273.16K. NPL Report. ENG 25

Sutton, G J M; Underwood, R J; Pitre, L*; de Podesta, M; Valkiers, S* (2010) Acoustic resonator experiments at the triple point of water: first results for the Boltzmann constant and remaining challenges. Int. J. Thermophysics, 31 (7). pp. 1310-1346.

Sutton, Gavin; Greenen, Adam; Stanger, Leigh; de Podesta, Michael (2018) The NPL portable standard flame: characterisation of the temperature field above the burner using precision Rayleigh scattering thermometry. NPL Report. ENG 69

T

Teixeira, R N*; Machin, G (2017) Long-term stability evaluation of a Sn-doped Ni-C eutectic cell suitable for radiation thermometry. Int. J. Thermophysics, 38 (6). p. 80.

Teixeira, R N*; Machin, G; Orlando, A* (2013) Towards the development of high temperature comparison artifacts for radiation thermometry. AIP Conf. Proc., 1552. pp. 363-368.

Teixeira, R*; Machin, G; Orlando, A* (2014) Development of high-temperature fixed points of unknown temperature suitable for key comparisons. Int. J. Thermophysics, 35 (3). pp. 467-474.

Tew, W L*; Rusby, R L; Lin, P*; Lipinski, L*; Steur, P P M*; Ricketson, B W A* (2015) A standardized interpolation of temperature using rhodium-iron resistance thermometers over the interval 4.2 K to 24.5 K. Int. J. Thermophysics, 36 (8). pp. 2036-2059.

Thorne, P. W.; Diamond, H. J.; Goodison, B.; Harrigan, S.; Hausfather, Z.; Ingleby, N. B.; Jones, P. D.; Lawrimore, J. H.; Lister, D. H.; Merlone, A.; Oakley, T.; Palecki, M.; Peterson, T. C.; de Podesta, M.; Tassone, C.; Venema, V.; Willett, K. M. (2018) Towards a global land surface climate fiducial reference measurements network. International Journal of Climatology, 38 (6). pp. 2760-2774. ISSN 08998418

Todd, A D W*; Lowe, D H; Dong, W*; Woods, D J* (2013) Comparison of realizations of Re-C fixed points filled and measured at NPL and NRC. AIP Conf. Proc., 1552. pp. 797-801.

Towey, C*; Easton, C*; Simpson, R; Pedlar, C* (2017) Conventional and novel body temperature measurement during rest and exercise induced hyperthermia. J. Thermal Biol., 63. pp. 124-130.

Tucker, D; Andreu, A; Elliott, C; Ford, T; Neagu, M; Machin, G; Pearce, J (2018) Integrated self-validating thermocouples with a reference temperature up to 1329 °C. Measurement Science and Technology, 29 (10). 105002 ISSN 0957-0233

Tye, R P; Kubicar, L*; Lockmuller, N* (2005) The development of a standard for contact transient methods of measurement of thermophysical properties. Int. J. Thermophysics, 26 (6). pp. 1917-1938.

Tye, R P; Salmon, D R (2002) NPL initiatives in the development of thermal properties reference materials. Int. J. Thermophysics, 23 (4). pp. 1047-1061.

U

Underwood, R; Flack, D R; Morantz, P*; Sutton, G; Shore, P*; de Podesta, M (2011) Dimensional characterisation of a quasispherical resonator by microwave and coordinate measurement techniques.. Metrologia, 48 (1). pp. 1-15.

Underwood, R; Gardiner, T; Finlayson, A; Bell, S A; de Podesta, M (2017) An improved non-contact thermometer and hygrometer with rapid response. Metrologia, 54 (1). S9-S15

Underwood, R; Gardiner, T; Finlayson, A; Few, J; Wilkinson, J; Bell, S A; Merrison, J*; Iverson, J J*; de Podesta, M (2015) A combined non-contact acoustic thermometer and infrared hygrometer for atmospheric measurements. Meteorological Applications, 22. pp. 830-835.

Underwood, R; de Podesta, M; Sutton, G; Stanger, L; Rusby, R; Harris, P; Morantz, P; Machin, G (2017) Further estimates of (T - T-90) close to the triple point of water. Int. J. Thermophysics, 38 (3). p. 44.

Underwood, R; de Podesta, M; Sutton, G; Stanger, L; Rusby, R; Harris, P M; Morantz, P*; Machin, G (2016) Estimates of the difference between thermodynamic temperature and the International Temperature Scale of 1990 in the range 118 K to 303 K. Philos. Trans. R. Soc. Lond. A, Math. Phys. Eng. Sci., 374 (2064). 20150048

Underwood, R J; Cuccaro, R*; Bell, S A; Gavioso, R M*; Ripa, D M*; Stevens, M; de Podesta, M (2012) A microwave resonance dew-point hygrometer. Meas. Sci. Technol., 23 (8). 085905

Underwood, R J; Davidson, S; Perkin, M; Morantz, P*; Sutton, G; de Podesta, M (2012) Pyknometric volume measurement of a quasispherical resonator. Metrologia, 49 (3). pp. 245-256.

Underwood, R J; Edwards, G J (2014) Microwave dimensional measurements of cylindrical resonators for primary acoustic thermometry. Int. J. Thermophysics, 35 (6-7). pp. 971-984.

Underwood, R J; Mehl, J B*; Pitre, L*; Edwards, G; Sutton, G; de Podesta, M (2010) Waveguide effects on quasispherical microwave cavity resonators. Meas. Sci. Technol., 21 (7). 075103

V

Valkiers, S*; Vendelbo, D*; Berglund, M*; de Podesta, M (2010) Ar primary measurements standards for the calibration of argon isotopes. Geochimica et Cosmochimica Acta, 74 (12, Su). A1069.

Valkiers, S*; Vendelbo, D*; Berglund, M*; de Podesta, M (2010) Preparation of argon primary measurement standards for the calibration of ion current ratios measured in argon. Int. J. Mass Spectrom., 291 (1-2). pp. 41-47.

Veltcheva, R I; Pearce, J V; da Silva, R*; Machin, G; Rusby, R L (2013) Strategies for minimising the uncertainty of the SPRT self-heating correction. AIP Conf. Proc., 1552. pp. 433-438.

Veltcheva, R I; Rusby, R L; Peters, D M; Watkins, R E J (2018) Experiences in calibrating industrial platinum resistance sensors between-196 °C and 80 °C. International Journal of Thermophysics, 39 (5). 65

Veltcheva, R*; Musial, L*; Machin, G; Gray, J (2012) Improvements in the measurement of the immersion profile of water triple points using bushes. Meas. Tech., 55 (4). pp. 442-447.

Vescovo, E*; Levick, A P; Childs, C*; Machin, G; Zhao, S*; Williams, S R* (2013) High-precision calibration of MRS thermometry using validated temperature standards: effects of ionic strength and protein content on the calibration. NMR Biomed., 26 (2). pp. 213-223.

van der Ham, E W M*; Battuello, M*; Bloembergen, P*; Bosma, R*; Clausen, S*; Enouf, O*; Filipe, E*; Fischer, J*; Gutschwager, B*; Hirvonen, T*; Machin, G (2001) Intercomparison of local temperature scales with transfer standard radiation thermometers between -50 ºC and 800 ºC. In: TEMPMEKO 01, June 2001, Berlin, Germany.

W

Wang, T*; Lowe, D; Machin, G (2009) Manufacturing of MC eutectics and reproducibility of Pt-C eutectic fixed points using a thermogauge furnace. Int. J. Thermophysics, 30 (1). pp. 59-68.

Webster, C H; Kazakova, O; Gallop, J C; Josephs-Franks, P W; Hernandez-Minguez, A*; Tzalenchuk, A Ya (2007) Influence of thermal coupling on spin avalanches in Mn12-acetate. Phys. Rev. B Condens. Matter, 76. 012403

Webster, E S*; Greenen, A; Pearce, J (2016) Measurement of the inhomogeneity in type B and land-jewell noble-metal thermocouples. Int. J. Thermophysics, 37 (7). p. 70.

Webster, E*; Mason, R*; Greenen, A; Pearce, J (2015) A system for high-temperature homogeneity scanning of noble-metal thermocouples. Int. J. Thermophysics, 36 (10-11). pp. 2922-2939.

Willett, K M*; Dunn, R J H*; Thorne, P W*; Bell, S A; de Podesta, M; Parker, D E*; Jones, P D*; Williams, C N* (2014) HadISDH land surface multi-variable humidity and temperature record for climate monitoring. Climate of the Past, 10 (6). pp. 1983-2006.

Willett, K M*; Williams, C N*; Dunn, R J H*; Thorne, P W*; Bell, S A; de Podesta, M; Jones, P D*; Parker, D E* (2013) HadISDH: An updated land surface specific humidity product for climate monitoring. Climate of the Past, 9 (2). pp. 657-677.

Williams, R G (1996) Interim report SM&T Framework III project 3032 - calibration panels for thermal transmittance of glazed assemblies. NPL Report. QM 122

Williams, R G (2002) Overview of a project to determine the thermal resistance of masonry walls in dry and moist states and a conversion procedure to determine the appropriate design value. In: 6th International Symposium on Building Physics in the Nordic Countries, 2002.

Williams, R G; Ballard, G (2002) Calibration of a surround panel used to measure window U-values in a hot box apparatus as specified in BS EN ISO 12567-1:2000. NPL Report. CBTLM 18

Williams, R G; Ballard, G (2003) Calibration of a surround panel used to measure window and door U-values in the rotatable hot box apparatus as specified in BS EN ISO 12567-1:2000. NPL Report. CBTLM 26

Williams, R G; Ballard, G (2003) Validation of the NPL rotatable wall guarded hot box with horizontal heat flow. NPL Report. CBTLM 25

Williams, R G; Ballard, G (2004) An evaluation of the effect of high performance spacer bars on the thermal performance of a range of window systems. NPL Report. DEPC-TH 001

Williams, R G; Ballard, G (2004) An investigation of measurement procedures needed to determine thermal transmittance of deep structures using both horizontal and vertical heat flow. NPL Report. DEPC-TH 002

Williams, R G; Hall, D A (1998) Laboratory intercomparison of Hot Box measurements of a glazed window system using the measurement procedures given in ISO/DIS 12567 and prEN 12412-1 standards. NPL Report. CBTM 5

Williams, R G; Hall, D A (1995) Report on hot box measurements made of two 1.48m x 1.23m glazed, calibrated reference panels as specified in ISO/CD 12567 and CEN/TC 89 WI 26 part 2 03.1995. NPL Report. QM 115

Williams, R G; Hall, D A (1997) SM&T Project 3032 - Contract MATI-CT 940063. Final summary report - Design and validation of glazed calibration panels required for the measurement of thermal transmittance of glazed assemblies. NPL Report. CBTM 2

Williams, R G; Hall, D A (1997) SM&T Project 3032 - Contract MATI-CT 940063. Report of the NPL hot box measurements using the procedures specified in prEN 12412-1 with 1.2m X 1.2m glazed calibration panels. NPL Report. CBTM 1

Williams, R G; Hall, D J (1997) DOE Research contract 39/3/279 - Hot-box measurements of eight window systems. NPL Report. QM 132

Williams, R G; Harris, R* (1997) DOE Research contract 39/3/279 - Comparison between the measured, simulated and calculated U-values of eight window systems. NPL Report. QM 131

Williams, R G; Harris, R* (1996) Department of the Environment, partners in technology, technical infrastructure programme. Validation of thermal performance design tools for window frame construction: an independent verification by agreed measurement procedures. Report on phase 1 - comparison between the measured and simulated U-values of three window systems comprising a thermally broken aluminium frame, a PVC-U frame and a hardwood frame. NPL Report. QM 119

Williams, R G; Tye, R (2003) Validation of measurement techniques and the determination of data required for thermal modelling of moist masonry walls. In: 2nd International Conference on Building Physics, 2003, Leuven, Belgium.

Willmott, J R*; Lowe, D; Broughtom, M*; White, B S*; Machin, G (2016) Potential for improved radiation thermometry measurement uncertainty through implementing a primary scale in an industrial laboratory. Meas. Sci. Technol., 27 (9). 094002

Woolliams, E R; Bloembergen, P*; Machin, G (2015) Proposed process for estimating definitive temperatures of high temperature fixed-points. Int. J. Thermophysics, 36 (2-3). pp. 347-366.

Woolliams, E R; Machin, G; Lowe, D H; Winkler, R (2006) Metal (carbide)-carbon eutectics for thermometry and radiometry: a review of the first seven years. Metrologia, 43. R11-R25

Y

Yamada, Y*; Anhalt, K*; Battuello, M*; Bloembergen, P*; Khlevnoy, B*; Machin, G; Matveyev, M*; Sadli, M*; Wang, T* (2013) Construction of high-temperature fixed-point cells for thermodynamic temperature assignment. AIP Conf. Proc., 1552. pp. 335-339.

Yamada. Y*,, ; Anhalt, K*; Battuello, M*; Bloembergen, P*; Khlevnoy, B*; Machin, G; Matveyev, M*; Sadli, M*; Todd, A*; Wang, T* (2015) Evaluation and selection of high-temperature fixed-point cells for thermodynamic temperature assignment. Int. J. Thermophysics, 36 (8). pp. 1834-1847.

Yang, I; Underwood, R; de Podesta, M (2018) Investigating the adequacy of a low-cost vector network analyser for microwave measurements in quasispherical resonators. Measurement Science and Technology, 29 (7). 075013

Yoon, H W; Woodward, J T; McEvoy, H; Machin, G (2018) Thermodynamic measurements of Zn and Al freezing temperatures using an InGaAs-based, near-infrared radiation thermometer 3 (NIRT3). Journal of Physics: Conference Series, 1065. 122023 ISSN 1742-6588

Z

Zhang, B; Levick, A P; Edwards, G J (2007) Development of spectral radiation thermometry in high ambient temperatures. NPL Report. DEPC-TH 009

Zhang, B; Redgrove, J; Clarke, J D (2004) A transient method for total emissivity estimation. Int. J. Thermophysics, 25 (2). pp. 423-438.

Zhang, Z*; Machin, G (2009) Overview of radiation thermometry. Exp. Methods Phys. Sci., 42. pp. 1-28.

This list was generated on Sun May 19 18:38:04 2019 BST.