Flack, D (2014) Callipers and micrometers. Measurement Good Practice Guide. 40

Text (Measurement Good Practice Guide No. 40 (2nd Edition)) mgpg40.pdf - Published Version Download (3MB)

Abstract

This guide covers the use of callipers and micrometers for internal, external and depth measurements. The issues covered include the effect of measurement force, both when a ratchet is present (e.g. micrometers) and when it is not, particularly when measuring soft materials; use and general care, support and handling of micrometers and callipers; guidance on choosing the most appropriate equipment type for the measurement; advice on calibration and verification methods and how to generate an uncertainty budget for a measurement; use of electronic instruments, fault awareness, temperature effects; awareness of errors introduced into internal knife edge jaws as external/internal jaws wear; and standard calibration methods and reporting of results.

Item Type:	Report/Guide (Measurement Good Practice Guide)
Notes:	NPL made every effort to ensure all information contained in this Good Practice Guide was correct at time of publication. NPL is not responsible for any errors, omissions or obsolescence, and does not accept any liability arising from the use of these Good Practice Guides.
Subjects:	Engineering Measurements Engineering Measurements > Dimensional
Last Modified:	20 Feb 2026 14:09
URI:	https://eprintspublications.npl.co.uk/id/eprint/2043